Hmm still not luck, Here is some info from amanda.conf : runtapes 2 tapedev "/dev/nst0" tapetype ULTRIUM-3 changerfile "/etc/amanda/global/chg-scsi.conf"
and now /etc/amanda/global/chg-scsi.conf : number_configs 1 eject 1 sleep 90 cleanmax 100 changerdev /dev/sg3 config 0 drivenum 0 dev /dev/nst0 But when Ido a amtape CONFIG current : changer: got exit: 2 str: please check your config and use a config file for chg-scsi amtape: could not get changer info: check your config and use a config file for chg-scsi amtape: could not get changer info: check your config and use a config file for chg-scsi amtape: pid 2818 finish time Mon Jul 23 13:32:35 2007 Any idea ? Tx !!! Pavel Pragin wrote: > Hello, > > Give this a try: > Tape drive: /dev/nst0 > Changer Device: /dev/sg3 > > Thanks > Pavel > >> With pleasure :) >> >> cat /proc/scsi/scsi >> >> Host: scsi0 Channel: 00 Id: 00 Lun: 00 >> Vendor: HP Model: HSV200 Rev: 5100 >> Type: RAID ANSI SCSI revision: 05 >> Host: scsi0 Channel: 00 Id: 01 Lun: 00 >> Vendor: HP Model: HSV200 Rev: 5100 >> Type: RAID ANSI SCSI revision: 05 >> Host: scsi0 Channel: 00 Id: 02 Lun: 00 >> Vendor: HP Model: Ultrium 3-SCSI Rev: M22W >> Type: Sequential-Access ANSI SCSI revision: 03 >> Host: scsi0 Channel: 00 Id: 02 Lun: 01 >> Vendor: HP Model: MSL G3 Series Rev: 5.30 >> Type: Medium Changer >> >> >> Pavel Pragin wrote: >> >> >>> Hello, >>> >>> Can you please post the contents of this file: >>> /proc/scsi/scsi >>> >>> Thanks >>> Pavel >>> >>> >>>> Hello, >>>> We just installed a HP MSL 4048 (Fiber Channel). >>>> >>>> I do not know how to configure amanda.conf because there is several sg >>>> created by the library (it has 4 magazines). >>>> >>>> I suppose that : >>>> tapedev "/dev/st0" >>>> >>>> But how about : >>>> changerdev >>>> changerfile >>>> tpchanger >>>> >>>> In dmesg : >>>> >>>> qla2xxx 0000:07:01.0: >>>> QLogic Fibre Channel HBA Driver: 8.01.07-k1 >>>> QLogic QLA2340 - >>>> ISP2312: PCI-X (133 MHz) @ 0000:07:01.0 hdma-, host#=0, fw=3.03.20 IPX >>>> Vendor: HP Model: HSV200 Rev: 5100 >>>> Type: RAID ANSI SCSI revision: 05 >>>> Vendor: HP Model: HSV200 Rev: 5100 >>>> Type: RAID ANSI SCSI revision: 05 >>>> Vendor: HP Model: Ultrium 3-SCSI Rev: M22W >>>> Type: Sequential-Access ANSI SCSI revision: 03 >>>> Vendor: HP Model: MSL G3 Series Rev: 5.30 >>>> Type: Medium Changer ANSI SCSI revision: 05 >>>> scsi 0:0:0:0: Attached scsi generic sg0 type 12 >>>> scsi 0:0:1:0: Attached scsi generic sg1 type 12 >>>> scsi 0:0:2:0: Attached scsi generic sg2 type 1 >>>> scsi 0:0:2:1: Attached scsi generic sg3 type 8 >>>> st: Version 20050830, fixed bufsize 32768, s/g segs 256 >>>> st 0:0:2:0: Attached scsi tape st0 >>>> >>>> >>>> >>>> >>>> >
