With pleasure :) cat /proc/scsi/scsi
Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HP Model: HSV200 Rev: 5100 Type: RAID ANSI SCSI revision: 05 Host: scsi0 Channel: 00 Id: 01 Lun: 00 Vendor: HP Model: HSV200 Rev: 5100 Type: RAID ANSI SCSI revision: 05 Host: scsi0 Channel: 00 Id: 02 Lun: 00 Vendor: HP Model: Ultrium 3-SCSI Rev: M22W Type: Sequential-Access ANSI SCSI revision: 03 Host: scsi0 Channel: 00 Id: 02 Lun: 01 Vendor: HP Model: MSL G3 Series Rev: 5.30 Type: Medium Changer Pavel Pragin wrote: > Hello, > > Can you please post the contents of this file: > /proc/scsi/scsi > > Thanks > Pavel > >> Hello, >> We just installed a HP MSL 4048 (Fiber Channel). >> >> I do not know how to configure amanda.conf because there is several sg >> created by the library (it has 4 magazines). >> >> I suppose that : >> tapedev "/dev/st0" >> >> But how about : >> changerdev >> changerfile >> tpchanger >> >> In dmesg : >> >> qla2xxx 0000:07:01.0: >> QLogic Fibre Channel HBA Driver: 8.01.07-k1 >> QLogic QLA2340 - >> ISP2312: PCI-X (133 MHz) @ 0000:07:01.0 hdma-, host#=0, fw=3.03.20 IPX >> Vendor: HP Model: HSV200 Rev: 5100 >> Type: RAID ANSI SCSI revision: 05 >> Vendor: HP Model: HSV200 Rev: 5100 >> Type: RAID ANSI SCSI revision: 05 >> Vendor: HP Model: Ultrium 3-SCSI Rev: M22W >> Type: Sequential-Access ANSI SCSI revision: 03 >> Vendor: HP Model: MSL G3 Series Rev: 5.30 >> Type: Medium Changer ANSI SCSI revision: 05 >> scsi 0:0:0:0: Attached scsi generic sg0 type 12 >> scsi 0:0:1:0: Attached scsi generic sg1 type 12 >> scsi 0:0:2:0: Attached scsi generic sg2 type 1 >> scsi 0:0:2:1: Attached scsi generic sg3 type 8 >> st: Version 20050830, fixed bufsize 32768, s/g segs 256 >> st 0:0:2:0: Attached scsi tape st0 >> >> >> >> >
