Hi,
I'm new to alsa and I'm having some trouble configuring my RME Digi96/8
PAD soundcard. I'm hoping someone can help point me in the right
direction.
So far, I have alsa-driver, alsa-lib and alsa-utils 0.9.0rc7 installed and
the drivers are loaded. I can play wav files fine (actually they sound
fantastic), but I'm having trouble with the inputs... I'd like to be able
to configure the line-in and digital sp/dif inputs, but I'm not sure how
this is done. amixer doesn't seem to show them. All I seem to have is
DAC,0.
Can anyone tell me how to enable the analog and digital inputs using
amixer or another command line utility?
Here is my /etc/modules.conf
alias parport_lowlevel parport_pc
alias eth0 eepro100
alias scsi_hostadapter aic7xxx
alias scsi_hostadapter1 initio
alias scsi_hostadapter2 initio
alias usb-controller usb-uhci
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF verion 0.9.0 ---
alias char-major-116 snd
alias snd-card-0 snd-rme96
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
options snd major=116 cards_limit=1 device_mode=0666
options snd-rme96 index=0
# --- END: Generated by ALSACONF, do not edit. ---
Here is what amixer shows:
# amixer info
Card default 'PAD'/'RME Digi96/8 PAD at 0xf3000000, irq 5'
Mixer name : ''
Components : ''
Controls : 10
Simple ctrls : 1
# amixer controls
numid=3,iface=MIXER,name='IEC958 Playback Con Mask'
numid=4,iface=MIXER,name='IEC958 Playback Pro Mask'
numid=10,iface=MIXER,name='DAC Playback Volume'
numid=9,iface=PCM,name='Attenuation'
numid=7,iface=PCM,name='Clock Mode'
numid=1,iface=PCM,name='IEC958 Playback Default'
numid=5,iface=PCM,name='Input Connector'
numid=6,iface=PCM,name='Loopback Input'
numid=8,iface=PCM,name='Monitor Tracks'
# amixer scontrols
Simple mixer control 'DAC',0
Here is what I have in ~/.asoundrc:
pcm.rme96 {
type hw
card 0
}
ctl.rme96 {
type hw
card 0
}
Any help is appreciated. I'm using redhat 7.3 wth kernel 2.4.18 btw.
Thanks,
Trevor
-------------------------------------------------------
This SF.NET email is sponsored by:
SourceForge Enterprise Edition + IBM + LinuxWorld = Something 2 See!
http://www.vasoftware.com
_______________________________________________
Alsa-user mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/alsa-user
