I'm on 6.36.3 was thinking of downgrading to bugfix or upgrading to latest current. Will try another fs.com SFP and possibly order a mikrotik SFP
On Thu, Oct 20, 2016 at 12:49 PM, TJ Trout <[email protected]> wrote: > -2.7 any way I can lower the output? SM, I have some 7db attenuators I can > install? > > On Thu, Oct 20, 2016 at 12:39 PM, Faisal Imtiaz <[email protected]> > wrote: > >> What are your light levels ? >> SM or MM ? >> >> Faisal Imtiaz >> Snappy Internet & Telecom >> 7266 SW 48 Street >> Miami, FL 33155 >> Tel: 305 663 5518 x 232 >> >> Help-desk: (305)663-5518 Option 2 or Email: [email protected] >> >> ------------------------------ >> >> *From: *"Chris Wright" <[email protected]> >> *To: *[email protected] >> *Sent: *Thursday, October 20, 2016 3:30:03 PM >> *Subject: *Re: [AFMUG] CRS with sfp lockup >> >> I’ve seen that same issue as you describe it between >> CCR1036/CCR1016/CCR1009 and Netonix switches. Tik says fiber is up at 1Gbps >> but no rx traffic. Netonix detects the cable is plugged in but can’t get >> any traffic through. Toggling SFP to inactive/active usually fixes. Used >> Fiberstore Generic, Mikrotik, and HP SFPs in the Mikrotik – no improvements >> one over the other. Netonix seems to prefer HP SFPs. >> >> >> >> Doing things like turning flow control on/off or changing speed >> negotiation settings on the Mikrotik can induce this problem **sometimes** >> - depends on what mood it’s in. No rhyme or reason when it fails at other >> times – toggling usually fixes it though. >> >> >> >> Chris Wright >> >> Network Administrator >> >> >> >> *From:* Af [mailto:[email protected]] *On Behalf Of *Adam Moffett >> *Sent:* Thursday, October 20, 2016 12:19 PM >> *To:* [email protected] >> *Subject:* Re: [AFMUG] CRS with sfp lockup >> >> >> >> I'm not saying this is the same problem....but I have a situation where a >> Trango Apex Lynx loses link to a CCR 1036. The SFP interface on the router >> says there's link, but the SFP interface on the Trango says there isn't. >> The problem (in my case) occurs any time the Trango loses power. I can >> restore service by rebooting the CCR, unplugging and reconnecting the fiber >> cable, or disabling and re-enabling the SFP interface. In this case I >> didn't have a good picture of what was happening at first because when it >> was happening I didn't have remote access to see the condition of >> everything. >> >> >> >> The Apex Lynx has the JDSU SFP module sold by Trango. I've duplicated >> the problem with 4 different SFP's in the CCR (Mikrotik brand, Maxxwave, >> JDSU, and Finisar), but I haven't tried changing the SFP in the Trango. I >> don't know how common this issue is....it only became apparent after a UPS >> failed. >> >> >> >> >> >> ------ Original Message ------ >> >> From: "TJ Trout" <[email protected]> >> >> To: [email protected] >> >> Sent: 10/20/2016 2:30:29 PM >> >> Subject: [AFMUG] CRS with sfp lockup >> >> >> >> I have a mikrotik CRS210 with a non-mikrotik sfp which locked up last >> night, Not sure if it was the CRS or the sfp... >> >> >> >> Anyone encountered this and have a solution? >> >> >> >
