Hi all!
I've device with xorg 1.6.5, and I want to upgrade it to 1.10.4.
I tried to find IEGD driver but failed.
After some tweeks I have installed Intel driver from
http://intellinuxgraphics.org (xf86-video-intel-2.15.0.tar.bz2).
which almost works.
The problem I'have is that I'm unable to configure resolution for this
display.
In original xorg.conf I have:
Section "Screen"
SubSection "Display"
Depth 24
Modes "1920x480"
EndSubSection
Identifier "Screen0"
Device "Intel_IEGD-0"
EndSection
Section "Device"
Identifier "Intel_IEGD-0"
Driver "iegd"
VendorName "Intel(R) DEG"
BoardName "Embedded Graphics"
BusID "0:2:0"
Screen 0
Option "PcfVersion" "1792"
Option "ConfigId" "1"
Option "ALL/1/name" "test4"
Option "PortDrivers" "sdvo lvds"
Option "ALL/1/General/PortOrder" "24000"
Option "ALL/1/General/DisplayConfig" "2"
Option "ALL/1/General/DisplayDetect" "0"
Option "ALL/1/Port/4/General/name" "lvds"
Option "ALL/1/Port/4/General/EdidAvail" "0"
Option "ALL/1/Port/4/General/EdidNotAvail" "4"
Option "ALL/1/Port/4/General/Rotation" "0"
Option "ALL/1/Port/4/General/Edid" "0"
Option "ALL/1/Port/4/Attr/27" "1"
Option "ALL/1/Port/4/Attr/49" "1"
Option "ALL/1/Port/4/Attr/26" "18"
Option "ALL/1/Port/4/Attr/43" "7"
Option "ALL/1/Port/4/Dtd/1/PixelClock" "114000"
Option "ALL/1/Port/4/Dtd/1/HorzActive" "1920"
Option "ALL/1/Port/4/Dtd/1/HorzSync" "55"
Option "ALL/1/Port/4/Dtd/1/HorzSyncPulse" "88"
Option "ALL/1/Port/4/Dtd/1/HorzBlank" "800"
Option "ALL/1/Port/4/Dtd/1/VertActive" "480"
Option "ALL/1/Port/4/Dtd/1/VertSync" "3"
Option "ALL/1/Port/4/Dtd/1/VertSyncPulse" "5"
Option "ALL/1/Port/4/Dtd/1/VertBlank" "200"
Option "ALL/1/Port/4/Dtd/1/Flags" "0x8020000"
Option "ALL/1/Port/2/General/name" "sdvo"
Option "ALL/1/Port/2/General/EdidAvail" "0"
Option "ALL/1/Port/2/General/EdidNotAvail" "4"
Option "ALL/1/Port/2/General/Rotation" "0"
Option "ALL/1/Port/2/General/Edid" "0"
Option "ALL/1/Port/2/Attr/27" "1"
Option "ALL/1/Port/2/Attr/49" "1"
Option "ALL/1/Port/2/Attr/26" "18"
Option "ALL/1/Port/2/Dtd/1/PixelClock" "114000"
Option "ALL/1/Port/2/Dtd/1/HorzActive" "1920"
Option "ALL/1/Port/2/Dtd/1/HorzSync" "55"
Option "ALL/1/Port/2/Dtd/1/HorzSyncPulse" "88"
Option "ALL/1/Port/2/Dtd/1/HorzBlank" "800"
Option "ALL/1/Port/2/Dtd/1/VertActive" "480"
Option "ALL/1/Port/2/Dtd/1/VertSync" "3"
Option "ALL/1/Port/2/Dtd/1/VertSyncPulse" "5"
Option "ALL/1/Port/2/Dtd/1/VertBlank" "200"
Option "ALL/1/Port/2/Dtd/1/Flags" "0x8020000"
EndSection
I'tried a lot of different settings but I'm unable to get it working
with intel driver.
Usually I get:
4956.938] (II) intel(0): Not using mode "1920x480" (exceeds panel
dimensions)
Can someone help ?
best regards
Jarek
[ 800.748]
X.Org X Server 1.10.4
Release Date: 2011-08-19
[ 800.748] X Protocol Version 11, Revision 0
[ 800.748] Build Operating System: Linux 2.6.32-5-amd64 i686 Debian
[ 800.749] Current Operating System: Linux sidetft00 2.6.39-bpo.2-686-pae #1 SMP Thu Aug 4 11:02:22 UTC 2011 i686
[ 800.749] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.39-bpo.2-686-pae root=UUID=383057f1-2081-4c93-ad42-9cd746b8abd6 ro quiet
[ 800.749] Build Date: 29 August 2011 12:12:25AM
[ 800.749] xorg-server 2:1.10.4-1~bpo60+1 (Cyril Brulebois <[email protected]>)
[ 800.750] Current version of pixman: 0.16.4
[ 800.750] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 800.750] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 800.752] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Oct 27 16:33:27 2011
[ 800.752] (==) Using config file: "/etc/X11/xorg.conf"
[ 800.752] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 800.754] (==) ServerLayout "X.org Configured"
[ 800.754] (**) |-->Screen "Screen0" (0)
[ 800.754] (**) | |-->Monitor "VGA1"
[ 800.755] (**) | |-->Device "Card0"
[ 800.755] (**) |-->Input Device "Mouse0"
[ 800.755] (**) |-->Input Device "Keyboard0"
[ 800.756] (==) Automatically adding devices
[ 800.756] (==) Automatically enabling devices
[ 800.756] (WW) The directory "/usr/lib/X11/fonts/misc/" does not exist.
[ 800.756] Entry deleted from font path.
[ 800.756] (WW) The directory "/usr/lib/X11/fonts/TTF/" does not exist.
[ 800.756] Entry deleted from font path.
[ 800.756] (WW) The directory "/usr/lib/X11/fonts/OTF" does not exist.
[ 800.756] Entry deleted from font path.
[ 800.756] (WW) The directory "/usr/lib/X11/fonts/Type1/" does not exist.
[ 800.756] Entry deleted from font path.
[ 800.757] (WW) The directory "/usr/lib/X11/fonts/100dpi/" does not exist.
[ 800.757] Entry deleted from font path.
[ 800.757] (WW) The directory "/usr/lib/X11/fonts/75dpi/" does not exist.
[ 800.757] Entry deleted from font path.
[ 800.757] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 800.757] Entry deleted from font path.
[ 800.757] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 800.757] Entry deleted from font path.
[ 800.757] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 800.757] Entry deleted from font path.
[ 800.757] (WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
[ 800.757] Entry deleted from font path.
[ 800.757] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 800.757] Entry deleted from font path.
[ 800.757] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 800.758] Entry deleted from font path.
[ 800.758] (WW) `fonts.dir' not found (or not valid) in "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType".
[ 800.758] Entry deleted from font path.
[ 800.758] (Run 'mkfontdir' on "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType").
[ 800.758] (**) FontPath set to:
/usr/share/fonts/X11/misc,
built-ins
[ 800.758] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 800.758] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 800.758] (WW) Disabling Mouse0
[ 800.758] (WW) Disabling Keyboard0
[ 800.758] (II) Loader magic: 0x81fa6c0
[ 800.758] (II) Module ABI versions:
[ 800.758] X.Org ANSI C Emulation: 0.4
[ 800.758] X.Org Video Driver: 10.0
[ 800.758] X.Org XInput driver : 12.2
[ 800.758] X.Org Server Extension : 5.0
[ 800.761] (--) PCI:*(0:0:2:0) 8086:27ae:8086:27ae rev 3, Mem @ 0xfde80000/524288, 0xd0000000/268435456, 0xfdf80000/262144, I/O @ 0x0000ff00/8
[ 800.761] (--) PCI: (0:0:2:1) 8086:27a6:8086:27ae rev 3, Mem @ 0xfdf00000/524288
[ 800.761] (II) Open ACPI successful (/var/run/acpid.socket)
[ 800.762] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
[ 800.762] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
[ 800.762] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 800.762] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
[ 800.762] (II) "dri" will be loaded. This was enabled by default and also specified in the config file.
[ 800.762] (II) "dri2" will be loaded by default.
[ 800.762] (II) LoadModule: "dbe"
[ 800.764] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 800.764] (II) Module dbe: vendor="X.Org Foundation"
[ 800.764] compiled for 1.10.4, module version = 1.0.0
[ 800.765] Module class: X.Org Server Extension
[ 800.765] ABI class: X.Org Server Extension, version 5.0
[ 800.765] (II) Loading extension DOUBLE-BUFFER
[ 800.765] (II) LoadModule: "glx"
[ 800.766] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 800.766] (II) Module glx: vendor="X.Org Foundation"
[ 800.766] compiled for 1.10.4, module version = 1.0.0
[ 800.766] ABI class: X.Org Server Extension, version 5.0
[ 800.766] (==) AIGLX enabled
[ 800.766] (II) Loading extension GLX
[ 800.766] (II) LoadModule: "dri"
[ 800.767] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 800.768] (II) Module dri: vendor="X.Org Foundation"
[ 800.768] compiled for 1.10.4, module version = 1.0.0
[ 800.768] ABI class: X.Org Server Extension, version 5.0
[ 800.768] (II) Loading extension XFree86-DRI
[ 800.768] (II) LoadModule: "record"
[ 800.769] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 800.770] (II) Module record: vendor="X.Org Foundation"
[ 800.770] compiled for 1.10.4, module version = 1.13.0
[ 800.770] Module class: X.Org Server Extension
[ 800.770] ABI class: X.Org Server Extension, version 5.0
[ 800.770] (II) Loading extension RECORD
[ 800.770] (II) LoadModule: "extmod"
[ 800.771] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 800.772] (II) Module extmod: vendor="X.Org Foundation"
[ 800.772] compiled for 1.10.4, module version = 1.0.0
[ 800.772] Module class: X.Org Server Extension
[ 800.772] ABI class: X.Org Server Extension, version 5.0
[ 800.772] (II) Loading extension SELinux
[ 800.773] (II) Loading extension MIT-SCREEN-SAVER
[ 800.773] (II) Loading extension XFree86-VidModeExtension
[ 800.773] (II) Loading extension XFree86-DGA
[ 800.773] (II) Loading extension DPMS
[ 800.773] (II) Loading extension XVideo
[ 800.773] (II) Loading extension XVideo-MotionCompensation
[ 800.773] (II) Loading extension X-Resource
[ 800.773] (II) LoadModule: "dri2"
[ 800.774] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 800.774] (II) Module dri2: vendor="X.Org Foundation"
[ 800.774] compiled for 1.10.4, module version = 1.2.0
[ 800.774] ABI class: X.Org Server Extension, version 5.0
[ 800.774] (II) Loading extension DRI2
[ 800.775] (II) LoadModule: "intel"
[ 800.775] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 800.776] (II) Module intel: vendor="X.Org Foundation"
[ 800.776] compiled for 1.10.4, module version = 2.15.0
[ 800.776] Module class: X.Org Video Driver
[ 800.776] ABI class: X.Org Video Driver, version 10.0
[ 800.776] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge, Sandybridge, Sandybridge, Sandybridge, Sandybridge,
Sandybridge, Sandybridge
[ 800.778] (--) using VT number 7
[ 800.793] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 800.793] drmOpenDevice: node name is /dev/dri/card0
[ 800.793] drmOpenDevice: open result is 9, (OK)
[ 800.794] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 800.794] drmOpenDevice: node name is /dev/dri/card0
[ 800.794] drmOpenDevice: open result is 9, (OK)
[ 800.794] drmOpenByBusid: drmOpenMinor returns 9
[ 800.794] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 800.794] (II) intel(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
[ 800.794] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 800.794] (==) intel(0): RGB weight 888
[ 800.795] (==) intel(0): Default visual is TrueColor
[ 800.795] (II) intel(0): Integrated Graphics Chipset: Intel(R) 945GME
[ 800.795] (--) intel(0): Chipset: "945GME"
[ 800.795] (**) intel(0): Relaxed fencing disabled
[ 800.795] (**) intel(0): Framebuffer tiled
[ 800.795] (**) intel(0): Pixmaps tiled
[ 800.795] (**) intel(0): 3D buffers tiled
[ 800.795] (**) intel(0): SwapBuffers wait enabled
[ 800.795] (==) intel(0): video overlay key set to 0x101fe
[ 800.796] (II) intel(0): Output LVDS1 using monitor section LVDS1
[ 800.796] (**) intel(0): Option "Ignore"
[ 800.865] (II) intel(0): Output VGA1 using monitor section VGA1
[ 800.969] (II) intel(0): Output LVDS2 using monitor section LVDS2
[ 800.969] (**) intel(0): Option "Ignore"
[ 800.969] (II) intel(0): Output TV1 using monitor section TV1
[ 800.969] (**) intel(0): Option "Ignore"
[ 801.037] (II) intel(0): EDID for output VGA1
[ 801.037] (II) intel(0): Manufacturer: GSM Model: 4344 Serial#: 99340
[ 801.038] (II) intel(0): Year: 2004 Week: 25
[ 801.038] (II) intel(0): EDID Version: 1.3
[ 801.038] (II) intel(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 801.038] (II) intel(0): Signal levels configurable
[ 801.038] (II) intel(0): Sync: Separate
[ 801.038] (II) intel(0): Max Image Size [cm]: horiz.: 33 vert.: 25
[ 801.038] (II) intel(0): Gamma: 2.85
[ 801.038] (II) intel(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 801.038] (II) intel(0): First detailed timing not preferred mode in violation of standard!
[ 801.038] (II) intel(0): redX: 0.618 redY: 0.329 greenX: 0.295 greenY: 0.600
[ 801.038] (II) intel(0): blueX: 0.144 blueY: 0.071 whiteX: 0.283 whiteY: 0.298
[ 801.039] (II) intel(0): Supported established timings:
[ 801.039] (II) intel(0): 720x400@70Hz
[ 801.039] (II) intel(0): 720x400@88Hz
[ 801.039] (II) intel(0): 640x480@60Hz
[ 801.039] (II) intel(0): 640x480@67Hz
[ 801.039] (II) intel(0): 640x480@72Hz
[ 801.039] (II) intel(0): 640x480@75Hz
[ 801.039] (II) intel(0): 800x600@56Hz
[ 801.039] (II) intel(0): 800x600@60Hz
[ 801.039] (II) intel(0): 800x600@72Hz
[ 801.039] (II) intel(0): 800x600@75Hz
[ 801.039] (II) intel(0): 832x624@75Hz
[ 801.039] (II) intel(0): 1024x768@87Hz (interlaced)
[ 801.039] (II) intel(0): 1024x768@60Hz
[ 801.039] (II) intel(0): 1024x768@70Hz
[ 801.040] (II) intel(0): 1024x768@75Hz
[ 801.040] (II) intel(0): 1152x864@75Hz
[ 801.040] (II) intel(0): Manufacturer's mask: 0
[ 801.040] (II) intel(0): Supported standard timings:
[ 801.040] (II) intel(0): #0: hsize: 640 vsize 480 refresh: 75 vid: 20273
[ 801.040] (II) intel(0): #1: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 801.040] (II) intel(0): #2: hsize: 800 vsize 600 refresh: 75 vid: 20293
[ 801.040] (II) intel(0): #3: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 801.040] (II) intel(0): #4: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 801.040] (II) intel(0): #5: hsize: 1024 vsize 768 refresh: 75 vid: 20321
[ 801.040] (II) intel(0): #6: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 801.040] (II) intel(0): #7: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 801.040] (II) intel(0): Supported detailed timing:
[ 801.040] (II) intel(0): clock: 94.5 MHz Image Size: 310 x 230 mm
[ 801.041] (II) intel(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
[ 801.041] (II) intel(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
[ 801.041] (II) intel(0): Supported detailed timing:
[ 801.041] (II) intel(0): clock: 108.0 MHz Image Size: 310 x 230 mm
[ 801.041] (II) intel(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
[ 801.041] (II) intel(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
[ 801.041] (II) intel(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 71 kHz, PixClock max 115 MHz
[ 801.041] (II) intel(0): Monitor name: F700B
[ 801.041] (II) intel(0): EDID (in hex):
[ 801.041] (II) intel(0): 00ffffffffffff001e6d44430c840100
[ 801.042] (II) intel(0): 190e0103182119b9e85ad99e544b9924
[ 801.042] (II) intel(0): 12484cfffe80314f3159454f4559714f
[ 801.042] (II) intel(0): 614f61598180ea240060410028303060
[ 801.042] (II) intel(0): 130036e61000001e302a009851002a40
[ 801.042] (II) intel(0): 3070130036e61000001e000000fd0032
[ 801.042] (II) intel(0): a01e470b000a202020202020000000fc
[ 801.042] (II) intel(0): 0046373030420a2020202020202000e2
[ 801.042] (II) intel(0): EDID vendor "GSM", prod id 17220
[ 801.042] (II) intel(0): Using EDID range info for horizontal sync
[ 801.042] (II) intel(0): Using EDID range info for vertical refresh
[ 801.043] (II) intel(0): Printing DDC gathered Modelines:
[ 801.043] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 801.043] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 801.043] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 801.043] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 801.043] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 801.043] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 801.043] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 801.043] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 801.043] (II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[ 801.044] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 801.044] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 801.044] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 801.044] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 801.044] (II) intel(0): Modeline "1024x768i"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
[ 801.044] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 801.044] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 801.044] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 801.044] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 801.044] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 801.045] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 801.045] (II) intel(0): Printing probed modes for output VGA1
[ 801.045] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 801.045] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 801.045] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 801.045] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz)
[ 801.045] (II) intel(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 801.045] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 801.046] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 801.046] (II) intel(0): Modeline "1024x768"x87.0 44.90 1024 1032 1208 1264 768 768 776 817 interlace +hsync +vsync (35.5 kHz)
[ 801.046] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 801.046] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 801.046] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 801.046] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 801.046] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 801.046] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 801.046] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 801.046] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz)
[ 801.047] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 801.047] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 801.047] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 801.047] (II) intel(0): Modeline "720x400"x87.8 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[ 801.047] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 801.047] (II) intel(0): Output VGA1 connected
[ 801.047] (II) intel(0): Using exact sizes for initial modes
[ 801.047] (II) intel(0): Output VGA1 using initial mode 1152x864
[ 801.047] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 801.047] (II) intel(0): Kernel page flipping support detected, enabling
[ 801.048] (**) intel(0): Display dimensions: (330, 250) mm
[ 801.048] (**) intel(0): DPI set to (88, 87)
[ 801.048] (II) Loading sub module "fb"
[ 801.048] (II) LoadModule: "fb"
[ 801.049] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 801.050] (II) Module fb: vendor="X.Org Foundation"
[ 801.050] compiled for 1.10.4, module version = 1.0.0
[ 801.050] ABI class: X.Org ANSI C Emulation, version 0.4
[ 801.050] (II) Loading sub module "dri2"
[ 801.050] (II) LoadModule: "dri2"
[ 801.051] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 801.051] (II) Module dri2: vendor="X.Org Foundation"
[ 801.051] compiled for 1.10.4, module version = 1.2.0
[ 801.051] ABI class: X.Org Server Extension, version 5.0
[ 801.051] (==) Depth 24 pixmap format is 32 bpp
[ 801.052] (II) intel(0): [DRI2] Setup complete
[ 801.052] (II) intel(0): [DRI2] DRI driver: i915
[ 801.052] (II) intel(0): Allocated new frame buffer 1152x864 stride 8192, tiled
[ 801.052] (II) UXA(0): Driver registered support for the following operations:
[ 801.052] (II) solid
[ 801.053] (II) copy
[ 801.053] (II) composite (RENDER acceleration)
[ 801.053] (II) put_image
[ 801.053] (II) get_image
[ 801.053] (==) intel(0): Backing store disabled
[ 801.053] (==) intel(0): Silken mouse enabled
[ 801.053] (II) intel(0): Initializing HW Cursor
[ 801.144] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 801.145] (==) intel(0): DPMS enabled
[ 801.145] (II) intel(0): Set up textured video
[ 801.145] (II) intel(0): Set up overlay video
[ 801.146] (II) intel(0): direct rendering: DRI2 Enabled
[ 801.146] (--) RandR disabled
[ 801.146] (II) Initializing built-in extension Generic Event Extension
[ 801.146] (II) Initializing built-in extension SHAPE
[ 801.146] (II) Initializing built-in extension MIT-SHM
[ 801.146] (II) Initializing built-in extension XInputExtension
[ 801.146] (II) Initializing built-in extension XTEST
[ 801.146] (II) Initializing built-in extension BIG-REQUESTS
[ 801.146] (II) Initializing built-in extension SYNC
[ 801.146] (II) Initializing built-in extension XKEYBOARD
[ 801.146] (II) Initializing built-in extension XC-MISC
[ 801.146] (II) Initializing built-in extension SECURITY
[ 801.146] (II) Initializing built-in extension XINERAMA
[ 801.146] (II) Initializing built-in extension XFIXES
[ 801.146] (II) Initializing built-in extension RENDER
[ 801.147] (II) Initializing built-in extension RANDR
[ 801.147] (II) Initializing built-in extension COMPOSITE
[ 801.147] (II) Initializing built-in extension DAMAGE
[ 801.151] (II) SELinux: Disabled on system
[ 801.209] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 801.209] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 801.209] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 801.209] (II) AIGLX: enabled GLX_SGI_make_current_read
[ 801.209] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 801.210] (II) AIGLX: Loaded and initialized /usr/lib/dri/i915_dri.so
[ 801.210] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 801.213] (II) intel(0): Setting screen physical size to 304 x 228
[ 801.410] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 801.410] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 801.410] (II) LoadModule: "evdev"
[ 801.411] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 801.411] (II) Module evdev: vendor="X.Org Foundation"
[ 801.411] compiled for 1.10.3, module version = 2.6.0
[ 801.411] Module class: X.Org XInput Driver
[ 801.411] ABI class: X.Org XInput driver, version 12.2
[ 801.411] (II) Using input driver 'evdev' for 'Power Button'
[ 801.411] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 801.412] (**) Power Button: always reports core events
[ 801.412] (**) Power Button: Device: "/dev/input/event2"
[ 801.432] (--) Power Button: Found keys
[ 801.432] (II) Power Button: Configuring as keyboard
[ 801.432] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event2"
[ 801.432] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 801.432] (**) Option "xkb_rules" "evdev"
[ 801.432] (**) Option "xkb_model" "pc105"
[ 801.432] (**) Option "xkb_layout" "pl"
[ 801.566] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 801.566] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 801.566] (II) Using input driver 'evdev' for 'Power Button'
[ 801.566] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 801.566] (**) Power Button: always reports core events
[ 801.566] (**) Power Button: Device: "/dev/input/event1"
[ 801.576] (--) Power Button: Found keys
[ 801.576] (II) Power Button: Configuring as keyboard
[ 801.576] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1/event1"
[ 801.576] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 801.576] (**) Option "xkb_rules" "evdev"
[ 801.576] (**) Option "xkb_model" "pc105"
[ 801.576] (**) Option "xkb_layout" "pl"
[ 801.585] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event4)
[ 801.585] (II) No input driver/identifier specified (ignoring)
[ 801.587] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event5)
[ 801.587] (II) No input driver/identifier specified (ignoring)
[ 801.603] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 801.604] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 801.604] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 801.604] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 801.604] (**) AT Translated Set 2 keyboard: always reports core events
[ 801.604] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 801.612] (--) AT Translated Set 2 keyboard: Found keys
[ 801.612] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 801.612] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 801.612] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 801.612] (**) Option "xkb_rules" "evdev"
[ 801.612] (**) Option "xkb_model" "pc105"
[ 801.612] (**) Option "xkb_layout" "pl"
[ 801.615] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
[ 801.615] (II) No input driver/identifier specified (ignoring)
[ 827.747] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/mouse0)
[ 827.748] (II) No input driver/identifier specified (ignoring)
[ 827.749] (II) config/udev: Adding input device Logitech Optical USB Mouse (/dev/input/event6)
[ 827.749] (**) Logitech Optical USB Mouse: Applying InputClass "evdev pointer catchall"
[ 827.749] (II) Using input driver 'evdev' for 'Logitech Optical USB Mouse'
[ 827.749] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 827.749] (**) Logitech Optical USB Mouse: always reports core events
[ 827.749] (**) Logitech Optical USB Mouse: Device: "/dev/input/event6"
[ 827.768] (--) Logitech Optical USB Mouse: Found 3 mouse buttons
[ 827.768] (--) Logitech Optical USB Mouse: Found scroll wheel(s)
[ 827.768] (--) Logitech Optical USB Mouse: Found relative axes
[ 827.768] (--) Logitech Optical USB Mouse: Found x and y relative axes
[ 827.768] (II) Logitech Optical USB Mouse: Configuring as mouse
[ 827.768] (II) Logitech Optical USB Mouse: Adding scrollwheel support
[ 827.768] (**) Logitech Optical USB Mouse: YAxisMapping: buttons 4 and 5
[ 827.768] (**) Logitech Optical USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 827.768] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input6/event6"
[ 827.768] (II) XINPUT: Adding extended input device "Logitech Optical USB Mouse" (type: MOUSE)
[ 827.769] (II) Logitech Optical USB Mouse: initialized for relative axes.
[ 827.769] (**) Logitech Optical USB Mouse: (accel) keeping acceleration scheme 1
[ 827.769] (**) Logitech Optical USB Mouse: (accel) acceleration profile 0
[ 827.769] (**) Logitech Optical USB Mouse: (accel) acceleration factor: 2.000
[ 827.769] (**) Logitech Optical USB Mouse: (accel) acceleration threshold: 4
[ 869.034] (II) AIGLX: Suspending AIGLX clients for VT switch
[ 879.933] (II) Open ACPI successful (/var/run/acpid.socket)
[ 879.933] (II) AIGLX: Resuming AIGLX clients after VT switch
[ 880.073] (II) intel(0): EDID vendor "GSM", prod id 17220
[ 880.074] (II) intel(0): Using hsync ranges from config file
[ 880.074] (II) intel(0): Using vrefresh ranges from config file
[ 880.074] (II) intel(0): Printing DDC gathered Modelines:
[ 880.074] (II) intel(0): Modeline "1024x768"x0.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 880.074] (II) intel(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 880.074] (II) intel(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 880.074] (II) intel(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 880.074] (II) intel(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 880.074] (II) intel(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
[ 880.074] (II) intel(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
[ 880.075] (II) intel(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 880.075] (II) intel(0): Modeline "720x400"x0.0 35.50 720 738 846 900 400 421 423 449 -hsync -vsync (39.4 kHz)
[ 880.075] (II) intel(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 880.075] (II) intel(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 880.075] (II) intel(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
[ 880.075] (II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 880.075] (II) intel(0): Modeline "1024x768i"x0.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace +hsync +vsync (35.5 kHz)
[ 880.075] (II) intel(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
[ 880.075] (II) intel(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 880.076] (II) intel(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
[ 880.076] (II) intel(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 880.076] (II) intel(0): Modeline "640x480"x0.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 880.076] (II) intel(0): Modeline "800x600"x0.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 954.900] (II) Power Button: Close
[ 954.900] (II) UnloadModule: "evdev"
[ 954.900] (II) Unloading evdev
[ 954.920] (II) Power Button: Close
[ 954.920] (II) UnloadModule: "evdev"
[ 954.920] (II) Unloading evdev
[ 954.944] (II) AT Translated Set 2 keyboard: Close
[ 954.944] (II) UnloadModule: "evdev"
[ 954.944] (II) Unloading evdev
[ 954.984] (II) Logitech Optical USB Mouse: Close
[ 954.984] (II) UnloadModule: "evdev"
[ 954.984] (II) Unloading evdev
_______________________________________________
[email protected]: X.Org support
Archives: http://lists.freedesktop.org/archives/xorg
Info: http://lists.freedesktop.org/mailman/listinfo/xorg
Your subscription address: [email protected]
