Dear folks,
Using the geode driver 2.11.8 (server version1.7.7) on a Geode GX2
(Lippert Literunner2 PC104 board), there's stubbornly no VGA signal
following xinit.
Please find attached the Xorg.0.log . Since this topic seems a rather
special subject, the details (X config, kernel config, xrandr -q) are
put on http://www.pab-opto.de/pers/hwtests/gx2-xserver/ .
Maybe I'm overlooking something obvious. Maybe there's some detail on
the config specific to this board. FAQs seem uneventful, Lippert
webpages seem to suggest it's working, but the board hit EOL in 2009.
Glancing at xf86-video-geode-2.11.8 source didn't trigger much more
ideas (although pGeode->useVGA seems 'on'). If someone has a working
config on the Literunner2, or knows of some BIOS / kernel parameter to
be set for this board, TIA1e6 .
thanks
Peter
--
pab-opto, Freiburg, Germany, http://www.pab-opto.de
[see web page to check digital email signature]
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.14-dsa-ia32 i686 Debian
Current Operating System: Linux k5a 2.6.29.4 #8 Fri Jun 18 22:02:09 CEST 2010
i586
Kernel command line: root=/dev/sda1 ide=nodma ro
Build Date: 03 June 2010 04:08:50PM
xorg-server 2:1.7.7-2 (Julien Cristau <[email protected]>)
Current version of pixman: 0.16.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Jun 17 23:37:41 2010
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
(==) ServerLayout "Simple Layout"
(**) |-->Screen "Default Screen" (0)
(**) | |-->Monitor "faytech"
(**) | |-->Device "GX2"
(**) |-->Input Device "Generic Keyboard"
(**) |-->Input Device "Generic Mouse"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/Type1" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
Entry deleted from font path.
(WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not
exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/misc,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse'
will be disabled.
(WW) Disabling Generic Keyboard
(WW) Disabling Generic Mouse
(II) Loader magic: 0x81eac60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(--) using VT number 5
(--) PCI:*(0:0:1:1) 100b:0030:100b:0030 National Semiconductor Corporation
Geode GX2 Graphics Processor rev 0, Mem @ 0xee000000/16777216,
0xefff0000/16384, 0xefff8000/16384, 0xefff4000/16384
(II) Open ACPI successful (/var/run/acpid.socket)
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension SELinux
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "geode"
(II) Loading /usr/lib/xorg/modules/drivers/geode_drv.so
(II) Module geode: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.11.8
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) GEODE: Driver for AMD Geode Chipsets: Geode LX, Geode GX
(II) Primary Device is: PCI 0...@00:01:1
AmdPciProbe: Probing for supported devices!
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
(WW) System lacks support for changing MTRRs
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules/libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 0.1.0
ABI class: X.Org Video Driver, version 6.0
(**) GEODE(0): Depth 24, (--) framebuffer bpp 32
(==) GEODE(0): RGB weight 888
(==) GEODE(0): Default visual is TrueColor
(==) GEODE(0): Using gamma correction (1.0, 1.0, 1.0)
(II) GEODE(0): Using XAA acceleration architecture
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules/libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org Video Driver, version 6.0
(II) GEODE(0): Primary V_BIOS segment is: 0xc000
(II) GEODE(0): I2C bus "CS5536 DDC BUS" initialized.
(II) GEODE(0): I2C device "CS5536 DDC BUS:ddc2" registered at address 0xA0.
(II) GEODE(0): I2C bus "CS5536 DDC BUS" removed.
(II) GEODE(0): faytech: Using default hsync range of 31.50-37.90 kHz
(II) GEODE(0): faytech: Using default vrefresh range of 50.00-70.00 Hz
(II) GEODE(0): Clock range: 25.18 to 229.50 MHz
(II) GEODE(0): Not using default mode "640x350" (unknown reason)
(II) GEODE(0): Not using default mode "320x175" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x400" (unknown reason)
(II) GEODE(0): Not using default mode "320x200" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "720x400" (unknown reason)
(II) GEODE(0): Not using default mode "360x200" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (unknown reason)
(II) GEODE(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (vrefresh out of range)
(II) GEODE(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "640x480" (hsync out of range)
(II) GEODE(0): Not using default mode "320x240" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "800x600" (hsync out of range)
(II) GEODE(0): Not using default mode "400x300" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (unknown reason)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (hsync out of range)
(II) GEODE(0): Not using default mode "512x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x960" (unknown reason)
(II) GEODE(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x960" (unknown reason)
(II) GEODE(0): Not using default mode "640x480" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1280x1024" (hsync out of range)
(II) GEODE(0): Not using default mode "640x512" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (unknown reason)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1200" (hsync out of range)
(II) GEODE(0): Not using default mode "800x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1792x1344" (unknown reason)
(II) GEODE(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1792x1344" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "896x672" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1856x1392" (unknown reason)
(II) GEODE(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1856x1392" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "928x696" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "832x624" (unknown reason)
(II) GEODE(0): Not using default mode "416x312" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1152x864" (hsync out of range)
(II) GEODE(0): Not using default mode "576x432" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1360x768" (unknown reason)
(II) GEODE(0): Not using default mode "680x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1360x768" (unknown reason)
(II) GEODE(0): Not using default mode "680x384" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1400x1050" (unknown reason)
(II) GEODE(0): Not using default mode "700x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1440x900" (unknown reason)
(II) GEODE(0): Not using default mode "720x450" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1600x1024" (unknown reason)
(II) GEODE(0): Not using default mode "800x512" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1680x1050" (unknown reason)
(II) GEODE(0): Not using default mode "840x525" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1080" (unknown reason)
(II) GEODE(0): Not using default mode "960x540" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1200" (unknown reason)
(II) GEODE(0): Not using default mode "960x600" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1920x1440" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "960x720" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "2048x1536" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using default mode "1024x768" (bad mode
clock/interlace/doublescan)
(II) GEODE(0): Not using mode "600x480" (no mode of this name)
(--) GEODE(0): Virtual size is 800x600 (pitch 1024)
(**) GEODE(0): *Default mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
(II) GEODE(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605
628 +hsync +vsync (37.9 kHz)
(**) GEODE(0): Default mode "800x600": 36.0 MHz, 35.2 kHz, 56.2 Hz
(II) GEODE(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603
625 +hsync +vsync (35.2 kHz)
(**) GEODE(0): Default mode "640x480": 25.2 MHz, 31.5 kHz, 59.9 Hz
(II) GEODE(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492
525 -hsync -vsync (31.5 kHz)
(==) GEODE(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules/libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.2.1
ABI class: X.Org Video Driver, version 6.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(--) Depth 24 pixmap format is 32 bpp
(II) GEODE(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) GEODE(0): Found Geode 1000000 0xb6a2e000
(II) GEODE(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
8x8 color pattern filled rectangles
Indirect CPU to Screen color expansion
Screen to Screen color expansion
Solid Lines
Scanline Image Writes
Driver provided WritePixmap replacement
Setting up tile and stipple cache:
32 128x128 slots
20 256x256 slots
6 512x512 slots
32 8x8 color pattern slots
(==) GEODE(0): Backing store disabled
(==) GEODE(0): DPMS enabled
(II) Loading sub module "shadow"
(II) LoadModule: "shadow"
(II) Loading /usr/lib/xorg/modules/libshadow.so
(II) Module shadow: vendor="X.Org Foundation"
compiled for 1.7.7, module version = 1.1.0
ABI class: X.Org ANSI C Emulation, version 0.4
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
SELinux: Disabled on system, not enabling in X server
(II) AIGLX: Screen 0 is not DRI2 capable
(II) AIGLX: Screen 0 is not DRI capable
(II) AIGLX: Loaded and initialized /usr/lib/dri/swrast_dri.so
(II) GLX: Initialized DRISWRAST GL provider for screen 0
(II) config/udev: Adding input device Power Button (FF) (/dev/input/event0)
(**) Power Button (FF): Applying InputClass "evdev keyboard catchall"
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.6.901, module version = 2.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Power Button (FF): always reports core events
(**) Power Button (FF): Device: "/dev/input/event0"
(II) Power Button (FF): Found keys
(II) Power Button (FF): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (FF)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Power Button (CM) (/dev/input/event1)
(**) Power Button (CM): Applying InputClass "evdev keyboard catchall"
(**) Power Button (CM): always reports core events
(**) Power Button (CM): Device: "/dev/input/event1"
(II) Power Button (CM): Found keys
(II) Power Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device Sleep Button (CM) (/dev/input/event2)
(**) Sleep Button (CM): Applying InputClass "evdev keyboard catchall"
(**) Sleep Button (CM): always reports core events
(**) Sleep Button (CM): Device: "/dev/input/event2"
(II) Sleep Button (CM): Found keys
(II) Sleep Button (CM): Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button (CM)" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) config/udev: Adding input device AT Translated Set 2 keyboard
(/dev/input/event3)
(**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event3"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type:
KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "pc104"
(**) Option "xkb_layout" "us"
(II) Power Button (FF): Close
(II) UnloadModule: "evdev"
(II) Power Button (CM): Close
(II) UnloadModule: "evdev"
(II) Sleep Button (CM): Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
_______________________________________________
[email protected]: X.Org support
Archives: http://lists.freedesktop.org/archives/xorg
Info: http://lists.freedesktop.org/mailman/listinfo/xorg
Your subscription address: [email protected]
