Dear Bogdan,
It seems that your monitor support three kinds of output: VGA, LVDS, TV,
isn't it?
If you want to use VGA output and set the 1366x768 mode, you can test the
section like this:
Section "Monitor"
Identifier "VGA"
Modeline "1368x768_60.00" 85.25 1368 1440 1576 1784 768 771
781 798 -hsync +vsync
Option "PreferredMode" "1368x768_60.00"
EndSection
The monitor must support the mode listed in the user manual. I guess
the X don't use the timing from mode line, so the monitor have no display.
Best wishes,
Gordon
-----Original Message-----
From: [email protected]
[mailto:[email protected]] On Behalf Of Bogdan Burlacu
Sent: 2009年3月15日 16:56
To: [email protected]
Subject: vga output on intel 4500MHD
Hi everyone,
First of all thanks for all the great work.
I've got a problem and I've no idea how to fix it..
I recently got a new 37" lcd tv, and been trying to get it to work in
1366x768 (or any 'wide' resolution, for that matter).
I tried adding several ModeLines to xorg.conf, but none of them
seem to work.
The tv's manual shows a list with modes and frequencies supported for
the vga input, such as:
Signal name Horiz freq Vert freq
1280x1...@60hz 63.98 60.02
1366x...@60hz 48.39 60.04
It also says that:
* Applicable input signal for PC is basically compatible to VESA
standard timing
I have no trouble setting the tv to 1280x1024 but for 1366x768 (or,
1360x765, 1368x768, 1360x768 - as I found on many forums), it just
doesn't work.
Any ideas?
I'm attaching my xorg.conf to this message.
Thanks,
Bogdan.
_______________________________________________
xorg mailing list
[email protected]
http://lists.freedesktop.org/mailman/listinfo/xorg
