On Tue, Jun 1, 2021 at 8:34 AM AL13N <[email protected]> wrote: > Not 100% it's a bug or something i did wrong, but, > > with xl create i start a PV with 3 pci passthroughs > > after wards, xl pci-list shows all 3 nicely > > looking at the domU boot logs, pcifront is only creating one pci device > and lspci in the guest shows only 1 pci entry > > in at least 4.14.1 it still works. > > looking deeper, if you start with only 1 entry or 0 and you do > pci-attach for the other pci entries, all of this works fine. > > this is the pci section in question: > > pci=['0000:04:00.0,permissive=1', > '0000:00:1a.0,permissive=1,rdm_policy=relaxed,seize=1', > '0000:00:1d.0,permissive=1,rdm_policy=relaxed,seize=1'] > > this works fine in 4.12.1 and 4.14.1, but fails in 4.15.0, however > > booting with pci=['0000:04:00.0,permissive=1'] and then doing > > []# xl pci-attach <domain> > '0000:00:1a.0,permissive=1,rdm_policy=relaxed,seize=1' > []# xl pci-attach <domain> > '0000:00:1d.0,permissive=1,rdm_policy=relaxed,seize=1' > > also works, >
Sounds like it might be a tools issue? -George
