C:\MWDM>svnsync init --username eulergaussriemann https://ecy2.googlecode.com/sv n file:///C:/MWDM svnsync: warning: W200007: Target server does not support atomic revision proper ty edits; consider upgrading it to 1.7 or using an external locking program Authentication realm: <https://ecy2.googlecode.com:443> Google Code Subversion R epository Password for 'eulergaussriemann': svnsync: E180001: Unable to connect to a repository at URL 'file:///C:/MWDM' svnsync: E180001: Unable to open an ra_local session to URL svnsync: E180001: Unable to open repository 'file:///C:/MWDM'
YOU!...are Big Data <http://en.wikipedia.org/wiki/Big_data>. On Thu, Oct 31, 2013 at 1:17 PM, David Goldsmith < eulergaussriem...@gmail.com> wrote: > OK, now we're going in circles: what you cut and paste is what I've been > trying, over and over again, to no avail (as I said in my OP, it didn't > like the way I'm specifying my source folder.) I'm sure there's some > subtlety that--as a user, not an admin--I'm missing, that those > overly-simplified instructions aren't including, but I can't seem to > communicate what it is. I'll try posting a transcript of my efforts. > > DG > > YOU!...are Big Data <http://en.wikipedia.org/wiki/Big_data>. > > > On Thu, Oct 31, 2013 at 1:08 PM, Bob Archer <bob.arc...@amsi.com> wrote: > >> Not sure how we got off list. But, I just used svnsync to move a repo >> to google code.. it was pretty easy. Just follow the instructions on their >> wiki page:**** >> >> ** ** >> >> *How do I import an existing Subversion repository?* >> >> To upload the history of an existing Subversion repository, use the >> svnsync tool that ships with Subversion 1.4 or later. Run svnsync help to >> read more about this tool.**** >> >> Note that your Google Code repository must be reset to revision >> 0<https://code.google.com/p/support/source/detail?r=0> for >> this to work. Your project's Source tab will display instructions on how to >> reset the repository yourself. (Note: you must be a project owner to reset >> your own repository, and also to push code up with svnsync.)**** >> >> Here's a sample transcript that demonstrates how you can push history >> from an existing repository (located at file:///my/repos) to your >> repository on Google Code:**** >> >> $ svnsync init --username YOURUSERNAME https:// >> YOURPROJECT.googlecode.com/svn file:///path/to/localrepos >> Copied properties for revision 0. >> $ svnsync sync --username YOURUSERNAME https:// >> YOURPROJECT.googlecode.com/svn >> Committed revision 1. >> Copied properties for revision 1. >> Committed revision 2. >> Copied properties for revision 2. >> [...]**** >> >> When prompted for your password, use your googlecode.com password, which >> can be found on the settings tab<http://code.google.com/hosting/settings> of >> your profile page.**** >> >> Running svnsync on a large repository will take a significant amount of >> time. If you are disconnected during the process, you may see the error >> message "svnsync: Couldn't get lock on destination repos after 10 >> attempts". If this happens, you can remove the lock yourself; see the >> "Locks" section of >> svnsync.txt<http://svn.collab.net/repos/svn/trunk/notes/svnsync.txt> >> .**** >> >> ** ** >> >> BOb**** >> >> ** ** >> >> ** ** >> >> *From:* David Goldsmith [mailto:eulergaussriem...@gmail.com] >> *Sent:* Thursday, October 31, 2013 3:25 PM >> >> *To:* Bob Archer >> *Subject:* Re: Windows file:/// URL format for svnsync**** >> >> ** ** >> >> They used to have restrictions--for security--on what kind of executable >> code you could upload, but I think that was (is?) just for Google docs; AFA >> Google Code is concerned, seeing as how it's intended as an open source >> code hub, they allow just about anything (at least, anything >> text-based)--if there are restrictions, they don't feature them >> prominently, so I'm not aware of them.**** >> >> >> **** >> >> YOU!...are Big Data <http://en.wikipedia.org/wiki/Big_data>.**** >> >> ** ** >> >> On Thu, Oct 31, 2013 at 11:23 AM, Bob Archer <bob.arc...@amsi.com> wrote: >> **** >> >> I’ve never used google reports. Do they let you upload and import a dump >> file?**** >> >> **** >> >> *From:* David Goldsmith [mailto:eulergaussriem...@gmail.com] >> *Sent:* Thursday, October 31, 2013 2:05 PM >> *To:* Bob Archer**** >> >> >> *Subject:* Re: Windows file:/// URL format for svnsync**** >> >> **** >> >> Why wouldn't I just upload it to Google? I guess what I'm missing is: >> how does SVN "recognize" history? By path and filename? So, if I preserve >> that, shouldn't that be enough to preserve the history? Thanks again!*** >> * >> >> DG **** >> >> >> **** >> >> YOU!...are Big Data <http://en.wikipedia.org/wiki/Big_data>.**** >> >> **** >> >> On Thu, Oct 31, 2013 at 6:49 AM, Bob Archer <bob.arc...@amsi.com> wrote:* >> *** >> >> Good point… our just use svnrdump to dump the repo… then you can take >> that file, load it into a repo on another machine and then sync that to >> google.**** >> >> **** >> >> *From:* Bert Huijben [mailto:b...@qqmail.nl] >> *Sent:* Wednesday, October 30, 2013 7:02 PM >> *To:* 'David Goldsmith' >> *Cc:* users@subversion.apache.org >> *Subject:* RE: Windows file:/// URL format for svnsync**** >> >> **** >> >> ‘svn info WORKINGCOPY’ will tell you the url in the repository and the >> repository root.**** >> >> **** >> >> Assuming that you have access to the entire repository you probably want >> to sync from the repository root to an empty repository to have a local >> backup. (Look in http://svnbook.red-bean.com for details on how to setup >> the right hooks, etc)**** >> >> **** >> >> And with a bit less time pressure you can then sync that to google code.* >> *** >> >> **** >> >> Bert**** >> >> **** >> >> *From:* David Goldsmith [mailto:eulergaussriem...@gmail.com] >> *Sent:* woensdag 30 oktober 2013 22:59 >> *Cc:* users@subversion.apache.org >> *Subject:* Re: Windows file:/// URL format for svnsync**** >> >> **** >> >> Hi, Ben, and thanks for your reply. Unfortunately, I think that was the >> first (or perhaps the second) thing I tried, to no avail (also >> unfortunately, I'm away from my work computer for the rest of the day so I >> can't check my command history or the error message it generated). **** >> >> **** >> >> As I think about my sitch, I realize that the folder I thought was the >> root of the repository probably isn't, because it's the root of the >> directory tree in which reside all the files that I edit day-to-day, and >> that's supposed to be a working copy, not the repository itself, correct? >> Assuming that's correct, my ultimate goal is to "relocate" my project, with >> history, to a new, empty Google code project (already created and >> reset)--how should I proceed: should I continue to try to svnsync my new >> Google project to my existing repository (to which I'll never again have >> access after tomorrow), and if so, how do I find my repository from knowing >> where a working copy is ('cause, clearly, I've forgotten)? Or should I >> just upload my working copy from its root, and then check that out to any >> place else I want to be able to work on it--would such an upload include >> the history, and would Google Code recognize it? Please advise/help!**** >> >> **** >> >> Thanks,**** >> >> **** >> >> DG**** >> >> >> **** >> >> YOU!...are Big Data <http://en.wikipedia.org/wiki/Big_data>.**** >> >> **** >> >> On Wed, Oct 30, 2013 at 1:29 PM, Ben Reser <b...@reser.org> wrote:**** >> >> On 10/30/13 1:08 PM, David Goldsmith wrote: >> > Hi! I can't seem to get the formatting for my source repository >> name--which is >> > a Windows directory--correct for svnsync: I've tried forward slashes and >> > backslashes, quotes and no quotes, relative path and absolute >> path--nada. My >> > repository, in Windows syntax, is C:\MWDM--how do I specify this as >> part of the >> > source argument to svnsync? Thanks,**** >> >> file:///C:/MWDM >> >> Note that there are 3 forward slashes before the path because you want a >> blank >> host entry. >> >> >> http://svnbook.red-bean.com/en/1.7/svn.basic.in-action.html#svn.advanced.reposurls >> **** >> >> **** >> >> **** >> >> ** ** >> > >
