Is it as easy as "set $pc=0xYYYYYY; continue" in GDB console ? On Wed, Aug 17, 2022 at 4:39 PM Y. HB <sprh...@gmail.com> wrote:
> Hello, > > About two weeks ago, I worked in running RTEMS (5.1) on TMS570LC43 > Launchxl, and it booted and print via uart. > > But when I tried to build CFS on RTEMS, it failed due to not enough > memory, so I bought a TMDX570LC43 HDK with 8MB sdram on it. > > As indicated in https://devel.rtems.org/wiki/TBR/BSP/Tms570, due to Flash > has limited erase cycles, it is recommended to run program in SDRAM during > debug and tests. > > I have seen SDRAM_SCI_configuration, there is no special code to jump to > RTEMS startup code. In the main(), it is merly setup SCI and EMIF, then > forever loop. > > So if I want to run RTEMS in SDRAM after initialization after HALCoGen, > how should I start it ? use some GDB command or write a jump/branch > instruction before "forever loop" in main()? > > Thanks >
_______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
