Hi Heinz, That statement is in there, in my setup at line 997, but I still get this every few minutes:
***** Primary Network interface : cpsw0 ***** all out ---> interface = cpsw0 all out ---> reason = RENEW all out ---> pid = 1 all out ---> ifmetric = 201 all out ---> ifwireless = 0 all out ---> ifflags = 4294936643 all out ---> ifmtu = 1500 all out ---> interface_order = cpsw0 all out ---> if_up = true all out ---> if_down = false all out ---> old_ip_address = 172.16.0.215 all out ---> old_subnet_cidr = 16 all out ---> old_network_number = 172.16.0.0 all out ---> old_subnet_mask = 255.255.0.0 all out ---> old_broadcast_address = 172.16.255.255 all out ---> old_dhcp_lease_time = 600 all out ---> old_dhcp_message_type = 5 all out ---> old_dhcp_server_identifier = 172.16.0.201 all out ---> new_ip_address = 172.16.0.215 all out ---> new_subnet_cidr = 16 all out ---> new_network_number = 172.16.0.0 all out ---> new_subnet_mask = 255.255.0.0 all out ---> new_broadcast_address = 172.16.255.255 all out ---> new_dhcp_lease_time = 600 all out ---> new_dhcp_message_type = 5 all out ---> new_dhcp_server_identifier = 172.16.0.201 BTW, this is EPICS 7.0.6 Pete. From: Heinz Junkes Sent: Monday, July 19, 2021 11:42 AM To: Siddons, David Cc: [email protected] Subject: Re: suppressing DHCP messages FYI, Pete is a EPICS - User… Hello Pete, in modules/libcom/RTEMS/posix/rtems_init.c in line 1008 (before sc = rtems_bsd_initialize();) there is a / should be a line with rtems_bsd_set_vprintf_handler(rtems_bsd_vprintf_handler_mute); That should suppress all output from the network intitialization? Translated with www.DeepL.com/Translator<http://www.DeepL.com/Translator> (free version) Gruss Heinz ------------------------------------------------------------------------------ Fritz-Haber-Institut | Phone: (+49 30) 8413-4270 Heinz Junkes | Fax (G3+G4): (+49 30) 8413-5900 Faradayweg 4-6 | VC: [email protected] D - 14195 Berlin | E-Mail: [email protected] ------------------------------------------------------------------------------ > On 19. Jul 2021, at 17:30, Siddons, David <[email protected]> wrote: > > My application uses dhcp, and the system issues a screenfull of messages > every time the lease is renewed. Is there a way to stop that? > Pete. > > _______________________________________________ > users mailing list > [email protected] > http://lists.rtems.org/mailman/listinfo/users
_______________________________________________ users mailing list [email protected] http://lists.rtems.org/mailman/listinfo/users
