Hi Chris, Thanks very much for your reply and advice.
On Tue, 29 Dec 2020 at 11:58, Chris Johns <[email protected]> wrote: > > I'm using TI Code Composer Studio to load the RTEMS application image > via XDS100 > > V3.0 debugger. If I reset the program counter and step through the > startup code > > I see it error on the bsp_fdt_get() call. > > Is this a crash or is an error reported? We should report an error and not > crash. > Neither - the processor continues running, just not executing anything useful. > My IDE isn't copying an fdt image to the expected location the way uboot > would, > > and so this makes sense. My question is how do other people get around > this problem? > > > > Has anyone else used a similar setup and solved this issue? > > I have not hit this issue but I saw this as a problem with the approach > taken of > loading an FDT via the bootloader. It would have been nice to have a way to > integrate an FDT into the IMFS (or executable) rather than an external > load. > Agreed - this would make it much easier to debug things. Even just having this as an option to support debugging would be useful. > Another approach is to boot using uboot and have it load the FDT and RTEMS > executable then jump to it. If you can connect via JTAG, reset the > processor, > set a hardware break point on the entry point to RTEMS, and start the > processor > running from reset it should trigger when uboot jumps to RTEMS. The entry > point > is at a fixed address. When the breakpoint is hit delete it and then you > can set > further break points in your application. > Thanks for this suggestion - I've managed to get this working pretty much as you described. I build the SD card image and boot from that, then connect via JTAG, reset and break on Init(). It's a pretty clunky process, but at least I have actual on device debugging working now instead of having to rely on printf debugging. Cheers, James
_______________________________________________ users mailing list [email protected] http://lists.rtems.org/mailman/listinfo/users
