On 11/25/20 4:18 PM, jan.som...@dlr.de
wrote:
On Wed, 25 Nov 2020 at 15:41, <jan.som...@dlr.de> wrote:Hello,I tried to experiment a bit with the riscv BSPs. I could run them using the SIS simulator, but failed with qemu. Regarding qemu I found this ticket: https://devel.rtems.org/ticket/3608 In one mailinglist thread (from 2018) someone said it worked with a current master version of qemu. I have compiled qemu-5.1 and qemu-5.2-rc2. Does anyone know if those version have the necessary patches included? Then another source of error could be the command line parameters I used: qemu-system-riscv32 -nographic -machine virt -m 2G -bios none -nographic -net none -serial stdio -monitor none -kernel ticker.exe Does someone have an example for a working set of command line options?Which BSP did you build and how did you build it? Can you try with -bios ticker.exe and discard the -kernel option? Did you try RV64?I used the griscv BSP. If I read it correctly, it should be a rv32imafd processor. I built the BSP from current master and used the waf build system to build it. I also just tried (with qemu-5.2.0-rc2) the following command using bios instead of kernel: qemu-system-riscv32 -nographic -machine virt -m 2G -nographic -net none -serial stdio -monitor none -bios /tmp/riscv/rtems/build/riscv/griscv/testsuites/samples/ticker.exe I still don't get any output. It might very well be that the serial or monitor configuration is not correct. These options are always a bit mysterious to me. FWIW if I use "-serial stdio -monitor none" I can close qemu with Ctrl+C. If I use "-serial mon:stdio" Ctrl+C does not work. Using qemu-system-riscv64 doesn't change anything.
The griscv bsp only works with sis, as it uses leon3/grlib
peripherals. To run on qemu, you need to use the riscv/riscv bsps,
e.g. rv32imafdc or any other in rtems/bsp/riscv/riscv/config.
Jiri.
PS. I plan to add "pure" riscv support to sis, once I find the
proper device-tree definitions for the bsps ...
Best regards, Jan Deutsches Zentrum für Luft- und Raumfahrt e. V. (DLR) German Aerospace Center Institute for Software Technology | Software for Space Systems and Interactive Visualization | Lilienthalplatz 7 | 38108 Braunschweig | Germany Jan Sommer_______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users _______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
_______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
