> Thanks. Thre is something usual happening here because RTEMS contains the > code needed to start the second core ....
I do not understand at all. So, with the current version of the repos this should work? Am I missing something in my implementation? Because I compiled RTEMS for SMP too and I configured CONFIGURE_MAXIMUM_PROCESSORS to 2. > If I build for SMP and set CONFIGURE_MAXIMUM_PROCESSORS to 2 my applications > run fine. I Did you use a zc706 board? I remember two years ago I started two processors using SMP on a zedboard without starting second core using xsdb. Regards, -----Original Message----- From: Chris Johns [mailto:chr...@rtems.org] Sent: 19 March 2020 23:31 To: Fernando Domínguez Pousa <fdpo...@gmv.com>; Sebastian Huber <sebastian.hu...@embedded-brains.de>; users@rtems.org Subject: Re: zc706 bsp does not work with maximum processors as 2 On 19/3/20 7:20 pm, Fernando Domínguez Pousa wrote: > I compiled a version using the master branches of rtems, rtems-source-builder > and rtems-libbsd from 24th of January 2020. Thanks. Thre is something usual happening here because RTEMS contains the code needed to start the second core .... https://urldefense.proofpoint.com/v2/url?u=https-3A__git.rtems.org_rtems_tree_bsps_arm_xilinx-2Dzynq_start_bspsmp.c-23n32&d=DwIDaQ&c=CIoxZ4z5BqFvKvSGFOTo726QZIiNTc_M9CmngT-Pla4&r=JJRyTkGL8xI4YFJLjo7JWw&m=5sGCFYM3DD5oktDUUantbBuCcEkiTqjbPdBUl210BGQ&s=sXXbgnMBeFnoPLA0PJc9YlVxzTDD65jAcJKWTKBlyos&e= If I build for SMP and set CONFIGURE_MAXIMUM_PROCESSORS to 2 my applications run fine. I Chris P Please consider the environment before printing this e-mail. _______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
