On 05/06/2019 02:55, Jython wrote: > Hello! > > 2. In the normal (non-debugging) case, the linker script still > places the > > .text section near zero, but places the start of the .data and .bss > sections at the start location of the MPC555's internal RAM. The > system startup code then configures the external RAM just after the > internal RAM in memory, forming one large block from the two RAM > devices. > > from https://devel.rtems.org/wiki/TBR/BSP/Ss555 > > but i dont know how to configure the external RAM just after the > internal RAM in memory? > hope you could give me some guide! > >
Hello Jython, the documentation you linked is for an MPC. But your subject line mentions an STM32. What controller / BSP are you using? Best regards Christian Mauderer -- -------------------------------------------- embedded brains GmbH Herr Christian Mauderer Dornierstr. 4 D-82178 Puchheim Germany email: christian.maude...@embedded-brains.de Phone: +49-89-18 94 741 - 18 Fax: +49-89-18 94 741 - 08 PGP: Public key available on request. Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. _______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
