On Wed, Apr 3, 2019 at 4:30 AM Ian Caddy <i...@goanna.iinet.net.au> wrote: > > Normally we would use 'c' instead of 'run'. > > If you have downloaded your code, just use the c for continue for embedded > processors. >
You might also step through the boot and RTEMS initialization sequence. A lot happens before "Init" gets hit. I guess there is some fatal error occurring > regards, > > Ian Caddy > > > On 3/04/2019 3:48 pm, 787562067 wrote: > > hi, guys, how to debug this case > > > Loading section .init, size 0xc vma 0x125ec > Loading section .fini, size 0xc vma 0x125f8 > Loading section .rodata, size 0x16b8 vma 0x12608 > Loading section .ARM.exidx, size 0x8 vma 0x13cc0 > Loading section .eh_frame, size 0x3c vma 0x13cc8 > Loading section .init_array, size 0x4 vma 0x13d04 > Loading section .fini_array, size 0x4 vma 0x13d08 > Loading section .jcr, size 0x4 vma 0x13d0c > Loading section .data, size 0x6ac vma 0x20001188 > Start address 0x189 > Transfer rate: 662944 bits in <1 sec. > (gdb) info b > No breakpoints or watchpoints. > (gdb) b Init > Breakpoint 1 at 0x3cc: file > ../../../../../../../rtems-4.11.3/c/src/../../testsuites/samples/hello/init.c, > line 168. > (gdb) run > Starting program: > /home/cheng/stm32f4/arm-rtems4.11/c/stm32f4/testsuites/samples/hello/hello.exe > [Inferior 1 (process 42000) exited normally] > (gdb) n > The program is not being run. > > > _______________________________________________ > users mailing list > users@rtems.org > http://lists.rtems.org/mailman/listinfo/users > > _______________________________________________ > users mailing list > users@rtems.org > http://lists.rtems.org/mailman/listinfo/users _______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
