I’m having less luck using Python 3 on macOS 10.14 (via Hombrew):
+ python3
/opt/grisp/grisp-software/cd73e8f90d/build/..//rtems-install/rtems/5//bin/waf
configure
--prefix=/opt/grisp/grisp-software/cd73e8f90d/build/..//rtems-install/rtems/5/
--rtems-bsps=arm/atsamv
--buildset=/opt/grisp/grisp-software/cd73e8f90d/build/libbsd-buildset.ini
Setting top to :
/opt/grisp/grisp-software/cd73e8f90d/rtems-libbsd
Setting out to :
/opt/grisp/grisp-software/cd73e8f90d/rtems-libbsd/build
RTEMS Version : 5
Architectures : arm-rtems5
Board Support Package : arm-rtems5-atsamv
Show commands : no
Long commands : no
Checking for program 'arm-rtems5-gcc' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-gcc
Checking for program 'arm-rtems5-g++' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-g++
Checking for program 'arm-rtems5-gcc' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-gcc
Checking for program 'arm-rtems5-ld' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-ld
Checking for program 'arm-rtems5-ar' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-ar
Checking for program 'arm-rtems5-nm' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-nm
Checking for program 'arm-rtems5-objdump' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-objdump
Checking for program 'arm-rtems5-objcopy' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-objcopy
Checking for program 'arm-rtems5-readelf' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-readelf
Checking for program 'arm-rtems5-strip' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-strip
Checking for program 'rtems-ld' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/rtems-ld
Checking for program 'rtems-tld' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/rtems-tld
Checking for program 'rtems-bin2c' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/rtems-bin2c
Checking for program 'tar' : /usr/bin/tar
Checking for program 'gcc, cc' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-gcc
Checking for program 'ar' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-ar
Checking for program 'g++, c++' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-g++
Checking for program 'ar' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-ar
Checking for program 'gas, gcc' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-gcc
Checking for program 'ar' :
/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/arm-rtems5-ar
Compiler version (arm-rtems5-gcc) : 7.3.0 20180125 (RTEMS 5, RSB
-modified, Newlib d13c84eb07e35984bf7a974cd786a6cdac29e6b9)
Checking for RTEMS CPU options header : started
-> processing test results : all ok
Checking for RTEMS_DEBUG : no
Checking for RTEMS_MULTIPROCESSING : no
Checking for RTEMS_NEWLIB : yes
Checking for RTEMS_POSIX_API : yes
Checking for RTEMS_SMP : no
Checking for RTEMS_NETWORKING : no
Checking for RTEMS header : started
-> processing test results : all ok
Checking for header dlfcn.h : yes
Checking for header rtems/pci.h : yes
Configure variant: : arm-rtems5-atsamv-grisp
Checking for header rtems/rtems-debugger.h : yes
'configure' finished successfully (1.027s)
+ python3
/opt/grisp/grisp-software/cd73e8f90d/build/..//rtems-install/rtems/5//bin/waf
Traceback (most recent call last):
File
"/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/.waf3-2.0.2-b8fa647d13364cbe0c1c8ec06042b54d/waflib/Node.py",
line 299, in ant_iter
raise StopIteration
StopIteration
The above exception was the direct cause of the following exception:
Traceback (most recent call last):
File
"/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/.waf3-2.0.2-b8fa647d13364cbe0c1c8ec06042b54d/waflib/Scripting.py",
line 118, in waf_entry_point
run_commands()
File
"/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/.waf3-2.0.2-b8fa647d13364cbe0c1c8ec06042b54d/waflib/Scripting.py",
line 178, in run_commands
ctx=run_command(cmd_name)
File
"/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/.waf3-2.0.2-b8fa647d13364cbe0c1c8ec06042b54d/waflib/Scripting.py",
line 169, in run_command
ctx.execute()
File
"/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/.waf3-2.0.2-b8fa647d13364cbe0c1c8ec06042b54d/waflib/Scripting.py",
line 366, in execute
return execute_method(self)
File
"/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/.waf3-2.0.2-b8fa647d13364cbe0c1c8ec06042b54d/waflib/Build.py",
line 92, in execute
self.load_envs()
File
"/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/.waf3-2.0.2-b8fa647d13364cbe0c1c8ec06042b54d/waflib/Build.py",
line 72, in load_envs
lst=node.ant_glob('**/*%s'%CACHE_SUFFIX,quiet=True)
File
"/opt/grisp/grisp-software/cd73e8f90d/rtems-install/rtems/5/bin/.waf3-2.0.2-b8fa647d13364cbe0c1c8ec06042b54d/waflib/Node.py",
line 353, in ant_glob
return list(it)
RuntimeError: generator raised StopIteration
Cheers,
Adam
--
Adam Lindberg
Senior Developer
+49 8135 69492 90
Peer Stritzinger GmbH Geschäftsführer: Peer Stritzinger
Aumüllerstr. 14 Handelsregister München HRB 133238
82216 Maisach www.stritzinger.com
> On 20. Mar 2019, at 12:37, Adam Lindberg <adam.lindb...@stritzinger.com>
> wrote:
>
> Good catch! Suspiciously close to .h and .o :-/
>
> Looking forwards to a solution. Glad to know I’m not the only one having the
> problem.
>
> Cheers,
> Adam
>
> --
> Adam Lindberg
> Senior Developer
> +49 8135 69492 90
>
> Peer Stritzinger GmbH Geschäftsführer: Peer Stritzinger
> Aumüllerstr. 14 Handelsregister München HRB 133238
> 82216 Maisach www.stritzinger.com
>
>> On 26. Feb 2019, at 19:28, Jonathan Brandmeyer <jbrandme...@planetiq.com>
>> wrote:
>>
>> On Tue, Feb 26, 2019 at 10:52 AM Christian Mauderer <l...@c-mauderer.de>
>> wrote:
>>
>>> also I don't know a solution, the problem sounds quite similar to the
>>> (unsolved) one here:
>>>
>>> https://lists.rtems.org/pipermail/users/2019-January/032920.html
>>>
>>> Differences: In your case it has been an "h" instead of a "o"
>>
>> I suspect that the letter h/o distinction comes from the first
>> character in the installation path: /opt/... for your case, and
>> /home/... for mine.
>> _______________________________________________
>> users mailing list
>> users@rtems.org
>> http://lists.rtems.org/mailman/listinfo/users
>
_______________________________________________
users mailing list
users@rtems.org
http://lists.rtems.org/mailman/listinfo/users
