On Fri, Jul 6, 2018 at 12:28 PM, Joel Sherrill <j...@rtems.org> wrote:
> > > On Fri, Jul 6, 2018 at 2:24 PM, Siddons, David <sidd...@bnl.gov> wrote: > >> I looked at the Github site, got to the 4.11 branch, and the window had >> an https link for cloning. THat seems to have worked: >> >> >> git clone https://github.com/RTEMS/rtems-source-builder.git rsb >> > > Weird. I would expect both to work from home. Even a new home router > wouldn't > get in the way of something like that. > >> >> More as I continue 😊 >> > > Weird that you are at home and having trouble. That's usually where > everything works. :( > > On an odd note, I had an 8-port switch die in my house this week. Was the > last > thing I expected to have broken. Got a new one and then my son plugged both > ends of a cable into the new switch and the network here suffered greatly. > I once saw a situation where an intern plug a cable dangling from one port into the empty port sitting next to it. The entire network went into total meltdown. Luckily when someone from the IT group was going for a replacement router happened to notice the "odd wiring" an unplugged it. The luck was that the spare router was in a storage room next to where the offending cable was. Russ > In > the end, we found a number of cables that weren't needed anymore but we > had never untangled them to remove them. > > Also installed an access point attached to the far end of the wired network > and that has helped some of the weak signal points. > > >> >> Pete. >> >> >> ------------------------------ >> *From:* users <users-boun...@rtems.org> on behalf of Siddons, David < >> sidd...@bnl.gov> >> *Sent:* Friday, July 6, 2018 3:14:13 PM >> *To:* j...@rtems.org >> >> *Cc:* rtems-us...@rtems.org >> *Subject:* Re: rsb >> >> >> Hi Joel, >> >> I'm doing this from home, so not going through the BNL firewall. It has >> worked in the past, but not for the last few weeks. I made an attempt a >> while back and had partial success, then cleaned everything out and started >> again, with this result. I thought maybe something was in transition, so I >> waited until now to try again. >> >> Pete. >> >> >> ------------------------------ >> *From:* Joel Sherrill <j...@rtems.org> >> *Sent:* Friday, July 6, 2018 3:08:52 PM >> *To:* Siddons, David >> *Cc:* rtems-us...@rtems.org >> *Subject:* Re: rsb >> >> >> >> On Fri, Jul 6, 2018, 2:06 PM Siddons, David <sidd...@bnl.gov> wrote: >> >> Hi Joel, >> >> No it doesn't. Is it possible there's something wrong with my git >> installation? >> >> >> Any chance bnl has blocked git? >> >> I doubt it is something on your computer. There is supposed to be a way >> to fetch git via https which would get around firewall issues. >> >> Pete. >> >> >> >> >> ------------------------------ >> *From:* Joel Sherrill <j...@rtems.org> >> *Sent:* Friday, July 6, 2018 2:59 PM >> *To:* Siddons, David >> *Cc:* users@rtems.org >> *Subject:* Re: rsb >> >> Hi >> >> By any chance does it work for you now? At least one of the servers >> was being bombarded yesterday and ran out of disk space with logs. >> >> This worked for me today with no hiccups. >> >> --joel >> >> >> >> On Fri, Jul 6, 2018 at 1:41 PM, Siddons, David <sidd...@bnl.gov> wrote: >> >> I just tried again to clone rsb: >> >> >> ~/development/rtems$ git clone git://git.rtems.org/rtems-sour >> ce-builder.git rsb >> Cloning into 'rsb'... >> fatal: repository 'https://git.rtems.org//rtems-source-builder.git/' not >> found >> >> >> Looking at the contents of this link gets: >> >> >> No repositories found >> >> >> I found this same clone command in various places throughout the RTEMS >> documentation. Am I doing something wrong? >> >> >> Pete. >> >> >> >> _______________________________________________ >> users mailing list >> users@rtems.org >> http://lists.rtems.org/mailman/listinfo/users >> >> >> > > _______________________________________________ > users mailing list > users@rtems.org > http://lists.rtems.org/mailman/listinfo/users >
_______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
