Another option is to not use X11 and draw directly to the frame buffer device (i.e. /dev/fb0). Qt supports this.
Kevin Kirspel Electrical Engineer - Sr. Staff Idexx Roswell 235 Hembree Park Drive Roswell GA 30076 Tel: (770)-510-4444 ext. 81642 Direct: (770)-688-1642 Fax: (770)-510-4445 From: users [mailto:users-boun...@rtems.org] On Behalf Of Emre Cetin Sent: Tuesday, May 01, 2018 12:15 PM To: users@rtems.org Subject: Fwd: Raspberry Pi Rtems-Graphical-Toolkit ---------- Forwarded message ---------- From: Emre Cetin <hsnemrece...@gmail.com<mailto:hsnemrece...@gmail.com>> Date: 2018-05-01 19:13 GMT+03:00 Subject: Re: Raspberry Pi Rtems-Graphical-Toolkit To: Chris Johns <chr...@rtems.org<mailto:chr...@rtems.org>> Thank you for your help Chris, I did what you said and it worked. However, I learned that Qt Applications works with X11 libraries in systems like Rtems. And I have to compile the nxlib library for raspberrypi BSP in the rtems-graphical-toolkit for X11. 'graphics\nxlib.bset' in rsb can not be build as mentioned in "https://lists.rtems.org/pipermail/devel/2015-August/012358.html<https://urldefense.proofpoint.com/v2/url?u=https-3A__lists.rtems.org_pipermail_devel_2015-2DAugust_012358.html&d=DwMFaQ&c=2do6VJGs3LvEOe4OFFM1bA&r=dbavT-WIJ4nBfQFKYnKdAD52Vyq3ZXSzrL9TAm21lZI&m=2qOzfS7qOLo1pWDBn2daTfb11BT4SII6DAGj7Nybgz0&s=FP3leA0B8WdfvIUwiGG0f2VRmehMyQCINAcYMEOWL8k&e=>". I understand that the nxlib is included in microwindows library anymore, but when I build 'graphics/microwindows.bset', will I also build nxlib?. BSP 's X11 header files and so on. How do I add X11 header files to BSP and other necessary files? What should I do at this point? Best wishes, Emre 2018-05-01 3:22 GMT+03:00 Chris Johns <chr...@rtems.org<mailto:chr...@rtems.org>>: On 01/05/2018 02:49, Emre Cetin wrote: > Hello everyone, Hi and welcome. > I have a Rtems project with Raspberry pi, I need to compile a simple QT > program. > I tried to run this project on Beaglebone Black, but it may not be as fast as > it > should be, it seems easier on Rpi. And I work on the Rpi 1 model B. In the > last > few days I am trying to establish the necessary libraries for QT, but I have > not > been successful. This sounds like an interesting project. > I've been working on Rtems-Graphical-Toolbase, but I have not > been successful in compilation. I tried a lot of ways but I do not know how to > load libraries manually yet, I am new to embedded systems. Welcome to embedded and embedded real-time software. > > I finally used these instructions, it seemed the easiest way to me; > > (in right directory) > ../source-builder/sb-set-builder \ > --prefix=$HOME/development/rtems/compiler/5 \ > --rtems-bsp=arm/raspberrypi \ > --log=graphic-build-log.txt \ > --with-rtems-bsp=raspberrypi \ > --pkg-tar-files \ > graphics/freetype2.bset \ > graphics/libjpeg.bset \ > graphics/libpng.bset \ > graphics/libtiff.bset \ > graphics/t1lib.bset \ > graphics/microwindows.bset > > RTEMS Source Builder - Set Builder, 5 (f3b1700dfd4d) > Build Set: graphics/microwindows.bset > Build Set: graphics/freetype2.bset > config: graphics/freetype-2.4.10-1.cfg > package: freetype-v2.4.10-arm-rtems5-1 > error: hash: freetype-2.4.10.tar.gz: insecure: md5 > Build FAILED > > It seems that new packages are causing problems, and I do not know how to > update > the codes. Can you give me some advice? A change went into the RSB in October last year to stop using the MD5 and SHA1 checksums as they are insecure. The ticket that covered this issue is: https://devel.rtems.org/ticket/2536<https://urldefense.proofpoint.com/v2/url?u=https-3A__devel.rtems.org_ticket_2536&d=DwMFaQ&c=2do6VJGs3LvEOe4OFFM1bA&r=dbavT-WIJ4nBfQFKYnKdAD52Vyq3ZXSzrL9TAm21lZI&m=2qOzfS7qOLo1pWDBn2daTfb11BT4SII6DAGj7Nybgz0&s=W5nqzhQZQ8MD2Qny_KmidQ3uYRpLeCKJeVIEUl3iORE&e=> It would seem some packages were missed and they need a better checksum. Could you please reopen the ticket and indicate the issue you have by pasting in the above output? FYI the fix is easy, run a sha512 command on your host on the file or patch which should be in the `sources` or `patches` directory and then update the line in the related file. The freetype config file is: rtems/config/graphics/freetype-2.4.10-1.cfg On the line starting with `%hash` change `md5` to `sha512` and paste in the SHA512 checksum. I see ... libjpeg-9a-1.cfg libpng-1.5.24-1.cfg libpng-1.6.21-1.cfg libtiff-4.0.2-1.cfg libtiff-4.0.6-1.cfg microwindows-0.93-dev-1.cfg t1lib-5.1.2-1.cfg ... are still using MD5 and will need updating. We welcome patches, it is often the fastest way to get something like this fixed. :) Thanks Chris
_______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
