Dear Huber, Thank you for this.
I will try to use bootm command. Best Regards, JunBeom -----Original Message----- From: Sebastian Huber <sebastian.hu...@embedded-brains.de> Sent: Tuesday, April 3, 2018 5:19 PM To: JunBeom Kim (EmbedCoreTech) <jb...@e-coretech.kr>; users@rtems.org Subject: Re: RTEMS/i.MX7D u-boot configuration. On 03/04/18 10:05, JunBeom Kim (EmbedCoreTech) wrote: > At this time, I did boot RTEMS in u-boot console according to below step in > my case. > > - fatload mmc 1 0x18000000 imx6q-sabresd.dtb > - fatload mmc 1 0x10100000 rtems.bin > - go 0x10100000 Use bootm. You must use a Linux U-Boot image: mkimage -A arm -O linux -T kernel -a 0x80200000 -e 0x80200000 -n RTEMS -d app.bin.gz app.img https://www.denx.de/wiki/view/DULG/UBootCmdGroupExec#Section_5.9.4.2. -- Sebastian Huber, embedded brains GmbH Address : Dornierstr. 4, D-82178 Puchheim, Germany Phone : +49 89 189 47 41-16 Fax : +49 89 189 47 41-09 E-Mail : sebastian.hu...@embedded-brains.de PGP : Public key available on request. Diese Nachricht ist keine geschäftliche Mitteilung im Sinne des EHUG. _______________________________________________ users mailing list users@rtems.org http://lists.rtems.org/mailman/listinfo/users
