Hello,
I'm using the Zedboard's BSP and my objetive is to print what goes out
through the uart1 interface for uart0 and vice versa.
I thought changing the memory addresses of the “console-config.c”
configuration file would suffice, but it is not.
zynq_uart_context zynq_uart_instances[2] = {
{
.base = RTEMS_TERMIOS_DEVICE_CONTEXT_INITIALIZER( "Zynq UART 0" ),
.regs = (volatile struct zynq_uart *) 0xe0001000,
//it was 0xe0000000,
.irq = ZYNQ_IRQ_UART_0
}, {
.base = RTEMS_TERMIOS_DEVICE_CONTEXT_INITIALIZER( "Zynq UART 1" ),
.regs = (volatile struct zynq_uart *) 0xe0000000,
//it was 0xe0001000,
.irq = ZYNQ_IRQ_UART_1
}
};
Do I have to modify more files like zyn-uart-regs.h?
Has anyone done it or can it guide me?
Thanks in advance.
Marco Fuentes Garcia
_______________________________________________
users mailing list
users@rtems.org
http://lists.rtems.org/mailman/listinfo/users
