Hi,
        Pls click the "System" item on the top tool bar and move mouse to 
"Administration" in popped menu and select "Network" and then you can see the 
network configuration panel as attached "screenshot.png". Above steps are 
described as "System->Administration->network" in launchpad.
        
        The primary use-case is that when wireless is not available, user could 
connect in wired way. But now I can accomplish this neither in roaming mode nor 
by DHCP nor by static IP.

        The log files are attached and I'll also upload them on
launchpad.

Best Regards
Yi Xia


-----Original Message-----
From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alexander Sack
Sent: 2008年7月11日 18:50
To: Xia, Yi
Subject: [Bug 247478] Re: Classmate PC fails to connect a wired LAN.

Could you please try to rephrase your test case? In particular its
unclear how you can |check "Enable roaming mode" off| in step 2 and then
|check "Enable roaming mode" off| in step 3 again.

What is the primary use-case you are trying to deal with here? setting
up a static IP configuration?

Does the behaviour change if you dont do step 1?

Please also attach the complete /var/log/syslog /var/log/daemon.log and
/var/log/messages taken _after_ reproducing this bug.

Thanks!


** Changed in: cmpc
       Status: New => Incomplete

-- 
Classmate PC fails to connect a wired LAN.
https://bugs.launchpad.net/bugs/247478
You received this bug notification because you are a direct subscriber
of the bug.

Status in Application and image devlopment around the Classmate PC:
Incomplete

Bug description:
1. Keep roaming mode enabled and plug in a network cable connected to an AP.
2. Select on the start bar: System->Administration->Network and click.Click 
unlock and enter user password.Double click wired connection and check "Enable 
roaming mode" off.Select DHCP in the Connection settings configuration and 
click "OK".
3.  Select on the start bar: System->Administration->Network and click.Click 
unlock and enter user password.Double click wired connection and check "Enable 
roaming mode" off.Select "static IP address" and input an valid IP in the same 
network segment of the AP and C class mask and click OK.

I cannot get wired link work in the above way.


** Attachment added: "Screenshot.png"
   http://launchpadlibrarian.net/16002117/Screenshot.png

** Attachment added: "syslog"
   http://launchpadlibrarian.net/16002118/syslog

** Attachment added: "daemon.log"
   http://launchpadlibrarian.net/16002119/daemon.log

** Attachment added: "messages"
   http://launchpadlibrarian.net/16002120/messages

** Description changed:

- 1. Select on the start bar: System->Administration->Network and click  unlock 
and enter user password.Double click wired connection and make sure roaming 
mode is checked and plug in a network cable connected to an AP.
- 2. Select on the start bar: System->Administration->Network and click  unlock 
and enter user password.Double click wired connection and check "Enable roaming 
mode" off.Select DHCP in the Connection settings configuration and click "OK".
- 3.  Select on the start bar: System->Administration->Network and click unlock 
and enter user password.Double click wired connection and check "Enable roaming 
mode" off.Select "static IP address" and input an valid IP in the same network 
segment of the AP and C class mask and click OK.
+ 1. Press "Fn" key and hit "F7" key to disable wireless.
+ 2. Select on the start bar: System->Administration->Network and click  unlock 
and enter user password.Double click wired connection and make sure roaming 
mode is checked and plug in a network cable connected to an AP.
+ 3. Select on the start bar: System->Administration->Network and click  unlock 
and enter user password.Double click wired connection and check "Enable roaming 
mode" off.Select DHCP in the Connection settings configuration and click "OK".
+ 4.  Select on the start bar: System->Administration->Network and click unlock 
and enter user password.Double click wired connection and check "Enable roaming 
mode" off.Select "static IP address" and input an valid IP in the same network 
segment of the AP and C class mask and click OK.
  
- I cannot get wired link work in the above way.
+ I cannot get wired link work in the above way(step 2,3,4).

-- 
Classmate PC fails to connect a wired LAN.
https://bugs.launchpad.net/bugs/247478
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to