Public bug reported:
System description: Epia M10000 motherboard, VIA chipset (Nehemiah
processor, 1GHz), 1GB RAM, firewire harddrive. Fully updated Hardy,
kernel 2.6.24-19-386.
This system ran reliably under Dapper for over a year.
The normal usage pattern of this system is for my wife and I to have
simultaneous X logins, and we switch between them using Ctrl-Alt-F7 /
Ctrl-Alt-F8 or F9. This worked fine under Dapper.
After upgrading to Hardy (using update-manager -d), frequently when switching
screens the machine locks up hard. By this I mean:
* the screen remains on but is completely static
* moving the mouse has no effect
* ctrl-alt-Fn and ctrl-alt-Backspace have no effect
* the machine is no longer pingable from another machine on the same LAN
The only solution is a hard reset.
I can't be 100% sure that *only* swapping screens is causing the
problem, because normally when we approach the console, the first thing
we do is to swap to the other screen using Ctrl-Alt-Fn; it's conceivable
the machine had already frozen before pressing this.
However, I *can* replicate the problem by switching screens with Ctrl-
Alt-Fn a few tens of times, so this does seem to be the culprit.
Having searched forums, I have found a number of reports about Hardy
lockups, but these seem to occur after some minutes of use, or are X
lockups which can be fixed by Ctrl-Alt-Backspace. Hence I'm reporting
this as a separate problem.
As far as I know, I'm not using any accelerated video driver. In fact,
the gdm login screen paints the background embarrassingly slowly, taking
nearly a second. But then, this isn't exactly a speed daemon system :-)
After logging in, the desktop background is displayed quickly.
Note: after upgrading to Hardy, I also reset xorg.conf to defaults (by
using the recovery mode).
$ lsb_release -rd
Description: Ubuntu 8.04.1
Release: 8.04
$ lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8623 [Apollo CLE266]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP]
00:0d.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller
(rev 80)
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1
Controller (rev 80)
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
00:11.1 IDE interface: VIA Technologies, Inc.
VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237
AC97 Audio Controller (rev 50)
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
01:00.0 VGA compatible controller: VIA Technologies, Inc. VT8623 [Apollo
CLE266] integrated CastleRock graphics (rev 03)
$ lsmod | sort
ac 6020 0
ac97_bus 2176 1 snd_ac97_codec
af_packet 21636 0
agpgart 33328 2 drm,via_agp
async_memcpy 2816 1 raid456
async_tx 7496 3 raid456,async_xor,async_memcpy
async_xor 4096 1 raid456
ata_generic 7428 0
battery 13316 0
bitblit 5888 1 fbcon
button 8336 0
cdrom 36512 1 sr_mod
container 4736 0
cpufreq_conservative 7200 0
cpufreq_ondemand 8084 1
cpufreq_powersave 1792 0
cpufreq_stats 5124 0
cpufreq_userspace 4120 0
crc_ccitt 2176 1 irda
dm_mirror 22912 0
dm_mod 60484 2 dm_mirror,dm_snapshot
dm_snapshot 18592 0
dock 10124 0
drm 80660 3 via
ehci_hcd 36748 0
evdev 11776 3
ext3 132872 4
fan 4740 0
fbcon 41888 72
floppy 58116 0
font 8576 1 fbcon
freq_table 4484 3 longhaul,cpufreq_stats,cpufreq_ondemand
fuse 48404 1
gameport 14472 1 snd_via82xx
i2c_core 23696 1 i2c_viapro
i2c_viapro 8852 0
ieee1394 92216 2 sbp2,ohci1394
iptable_filter 2944 0
ip_tables 13000 1 iptable_filter
ipv6 255172 18
irda 193852 1 via_ircc
jbd 43028 1 ext3
libata 159728 3 pata_via,pata_acpi,ata_generic
libusual 18208 1 usb_storage
linear 6272 0
longhaul 10600 0
lp 11332 0
mbcache 8192 1 ext3
md_mod 79508 6 raid10,raid456,raid1,raid0,multipath,linear
mii 5504 1 via_rhine
Module Size Used by
multipath 8448 0
ohci1394 32688 1
output 3712 1 video
parport 35912 3 ppdev,lp,parport_pc
parport_pc 35108 1
pata_acpi 7424 0
pata_via 12420 0
pci_hotplug 29728 1 shpchp
pcspkr 3072 0
ppdev 9348 0
processor 28080 2 thermal
psmouse 39056 0
raid0 8320 0
raid10 24192 0
raid1 24192 0
raid456 125712 0
rtc 13212 0
sbp2 22920 5
sbs 14216 0
sbshc 6784 1 sbs
scsi_mod 151180 6 sd_mod,sbp2,usb_storage,sg,sr_mod,libata
sd_mod 29584 6
serio_raw 7044 0
sg 36256 0
shpchp 33428 0
snd 54692 12
snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_pcm_oss,snd_pcm,snd_mixer_oss,snd_seq_dummy,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
snd_ac97_codec 99876 1 snd_via82xx
snd_mixer_oss 16896 1 snd_pcm_oss
snd_mpu401_uart 8832 1 snd_via82xx
snd_page_alloc 10504 2 snd_via82xx,snd_pcm
snd_pcm 75400 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_pcm_oss 40736 0
snd_rawmidi 24608 2 snd_mpu401_uart,snd_seq_midi
snd_seq 51152 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_seq_device 8588 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
snd_seq_dummy 3972 0
snd_seq_midi 8480 0
snd_seq_midi_event 7552 2 snd_seq_oss,snd_seq_midi
snd_seq_oss 34048 0
snd_timer 23556 2 snd_pcm,snd_seq
snd_via82xx 27928 0
softcursor 2176 1 bitblit
soundcore 7520 1 snd
sr_mod 16804 0
svgalib 9472 1 vt8623fb
thermal 15772 0
tileblit 2560 1 fbcon
uhci_hcd 25616 0
usbcore 143724 5 usb_storage,libusual,ehci_hcd,uhci_hcd
usb_storage 72512 0
vgastate 9600 1 vt8623fb
via 42496 2
via_agp 10240 1
via_ircc 26900 0
via_rhine 24840 0
video 18832 0
vt8623fb 17280 1
xor 15240 2 raid456,async_xor
x_tables 14852 1 ip_tables
$ dmesg
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.24-19-386 ([EMAIL PROTECTED]) (gcc version
4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 Wed Jun 18 14:09:56 UTC 2008 (Ubuntu
2.6.24-19.34-386)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003dff0000 (usable)
[ 0.000000] BIOS-e820: 000000003dff0000 - 000000003dff3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003dff3000 - 000000003e000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
[ 0.000000] 95MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] Entering add_active_range(0, 0, 253936) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 253936
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 253936
[ 0.000000] On node 0 totalpages: 253936
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 191 pages used for memmap
[ 0.000000] HighMem zone: 24369 pages, LIFO batch:3
[ 0.000000] Movable zone: 0 pages used for memmap
[ 0.000000] DMI 2.2 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F6620 checksum 0
[ 0.000000] ACPI: RSDP 000F6620, 0014 (r0 VT9174)
[ 0.000000] ACPI: RSDT 3DFF3000, 0028 (r1 VT9174 AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: FACP 3DFF3040, 0074 (r1 VT9174 AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: DSDT 3DFF30C0, 2FDD (r1 VT9174 AWRDACPI 1000 MSFT
100000C)
[ 0.000000] ACPI: FACS 3DFF0000, 0040
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3e000000:c1ff0000)
[ 0.000000] swsusp: Registered nosave memory region: 000000000009f000 -
00000000000a0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 -
00000000000f0000
[ 0.000000] swsusp: Registered nosave memory region: 00000000000f0000 -
0000000000100000
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total
pages: 251953
[ 0.000000] Kernel command line:
root=UUID=804188ab-4568-484f-9ed7-674ff45985c8 ro quiet splash nohz=off
[ 0.000000] No local APIC present or hardware disabled
[ 0.000000] mapped APIC to ffffb000 (017c4000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 999.856 MHz processor.
[ 211.110257] Console: colour VGA+ 80x25
[ 211.110268] console [tty0] enabled
[ 211.112795] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 211.116945] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 211.291478] Memory: 994424k/1015744k available (2079k kernel code, 20716k
reserved, 973k data, 364k init, 98240k highmem)
[ 211.291513] virtual kernel memory layout:
[ 211.291517] fixmap : 0xfffa6000 - 0xfffff000 ( 356 kB)
[ 211.291522] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 211.291527] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 211.291532] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 211.291536] .init : 0xc03fe000 - 0xc0459000 ( 364 kB)
[ 211.291541] .data : 0xc0307d54 - 0xc03fb3a4 ( 973 kB)
[ 211.291546] .text : 0xc0100000 - 0xc0307d54 (2079 kB)
[ 211.291558] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 211.291722] SLUB: Genslabs=11, HWalign=32, Order=0-1, MinObjects=4, CPUs=1,
Nodes=1
[ 211.371750] Calibrating delay using timer specific routine.. 2001.72
BogoMIPS (lpj=4003459)
[ 211.371839] Security Framework initialized
[ 211.371864] SELinux: Disabled at boot.
[ 211.371915] AppArmor: AppArmor initialized
[ 211.371930] Failure registering capabilities with primary security module.
[ 211.371950] Mount-cache hash table entries: 512
[ 211.372263] Initializing cgroup subsys ns
[ 211.372275] Initializing cgroup subsys cpuacct
[ 211.372299] CPU: After generic identify, caps: 0381b83f 00000000 00000000
00000000 00000000 00000000 00000000 00000000
[ 211.372325] CPU: L1 I Cache: 64K (32 bytes/line), D cache 64K (32 bytes/line)
[ 211.372334] CPU: L2 Cache: 64K (32 bytes/line)
[ 211.372341] CPU: After all inits, caps: 0381b93f 00000000 00000000 00000000
00000000 000000dc 00000000 00000000
[ 211.372372] Compat vDSO mapped to ffffe000.
[ 211.372406] CPU: Centaur VIA Nehemiah stepping 0a
[ 211.372421] Checking 'hlt' instruction... OK.
[ 211.391326] Freeing SMP alternatives: 0k freed
[ 211.391693] Early unpacking initramfs... done
[ 212.808739] ACPI: Core revision 20070126
[ 212.808983] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 212.812970] ACPI: setting ELCR to 0200 (from 0e20)
[ 212.816006] net_namespace: 64 bytes
[ 212.816028] Booting paravirtualized kernel on bare hardware
[ 212.817325] Time: 20:11:00 Date: 07/09/08
[ 212.817411] NET: Registered protocol family 16
[ 212.817904] EISA bus registered
[ 212.817927] ACPI: bus type pci registered
[ 212.847799] PCI: PCI BIOS revision 2.10 entry at 0xfb260, last bus=1
[ 212.847807] PCI: Using configuration type 1
[ 212.847838] Setting up standard PCI resources
[ 212.857429] ACPI: EC: Look up EC in DSDT
[ 212.866324] ACPI: Interpreter enabled
[ 212.866336] ACPI: (supports S0 S1 S4 S5)
[ 212.866371] ACPI: Using PIC for interrupt routing
[ 212.876672] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 212.877268] PCI quirk: region 0400-047f claimed by vt8235 PM
[ 212.877278] PCI quirk: region 0500-050f claimed by vt8235 SMB
[ 212.877693] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 212.913422] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14
15)
[ 212.913852] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14
15)
[ 212.914282] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 11 12 14
15)
[ 212.914711] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 10 *11 12 14
15)
[ 212.915059] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 212.915138] pnp: PnP ACPI init
[ 212.915162] ACPI: bus type pnp registered
[ 212.922511] pnp: PnP ACPI: found 14 devices
[ 212.922523] ACPI: ACPI bus type pnp unregistered
[ 212.922536] PnPBIOS: Disabled by ACPI PNP
[ 212.923102] PCI: Using ACPI for IRQ routing
[ 212.923113] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 212.991571] NET: Registered protocol family 8
[ 212.991579] NET: Registered protocol family 20
[ 212.991759] AppArmor: AppArmor Filesystem Enabled
[ 212.995556] Time: tsc clocksource has been installed.
[ 213.003663] system 00:00: iomem range 0xf0000-0xf3fff could not be reserved
[ 213.003675] system 00:00: iomem range 0xf4000-0xf7fff could not be reserved
[ 213.003686] system 00:00: iomem range 0xf8000-0xfbfff could not be reserved
[ 213.003696] system 00:00: iomem range 0xfc000-0xfffff could not be reserved
[ 213.003708] system 00:00: iomem range 0x3dff0000-0x3dffffff could not be
reserved
[ 213.003720] system 00:00: iomem range 0xffff0000-0xffffffff could not be
reserved
[ 213.003731] system 00:00: iomem range 0x0-0x9ffff could not be reserved
[ 213.003742] system 00:00: iomem range 0x100000-0x3dfeffff could not be
reserved
[ 213.003753] system 00:00: iomem range 0xfee00000-0xfee00fff has been reserved
[ 213.003765] system 00:00: iomem range 0xfff80000-0xfffeffff has been reserved
[ 213.003788] system 00:02: ioport range 0x400-0x47f has been reserved
[ 213.003798] system 00:02: ioport range 0x500-0x50f has been reserved
[ 213.003824] system 00:03: ioport range 0x4d0-0x4d1 has been reserved
[ 213.034874] PCI: Bridge: 0000:00:01.0
[ 213.034882] IO window: disabled.
[ 213.034895] MEM window: dc000000-ddffffff
[ 213.034904] PREFETCH window: d8000000-dbffffff
[ 213.034934] PCI: Setting latency timer of device 0000:00:01.0 to 64
[ 213.034972] NET: Registered protocol family 2
[ 213.071732] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 213.072891] TCP established hash table entries: 131072 (order: 8, 1048576
bytes)
[ 213.078481] TCP bind hash table entries: 65536 (order: 6, 262144 bytes)
[ 213.079869] TCP: Hash tables configured (established 131072 bind 65536)
[ 213.079879] TCP reno registered
[ 213.091987] checking if image is initramfs...<7>Switched to high resolution
mode on CPU 0
[ 214.358730] it is
[ 215.824064] Freeing initrd memory: 8124k freed
[ 215.825171] audit: initializing netlink socket (disabled)
[ 215.825204] audit(1215634263.532:1): initialized
[ 215.825626] highmem bounce pool size: 64 pages
[ 215.830766] VFS: Disk quotas dquot_6.5.1
[ 215.830864] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 215.831313] io scheduler noop registered
[ 215.831323] io scheduler anticipatory registered
[ 215.831330] io scheduler deadline registered
[ 215.831367] io scheduler cfq registered (default)
[ 215.831392] PCI: VIA PCI bridge detected. Disabling DAC.
[ 215.831481] Boot video device is 0000:01:00.0
[ 215.832110] isapnp: Scanning for PnP cards...
[ 216.186026] isapnp: No Plug & Play device found
[ 216.274450] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 216.274658] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 216.275303] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 216.276606] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 216.277294] 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
[ 216.279210] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 216.279426] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 216.279684] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 216.280105] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 216.280119] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 216.287106] mice: PS/2 mouse device common for all mice
[ 216.287384] EISA: Probing bus 0 at eisa.0
[ 216.287444] EISA: Detected 0 cards.
[ 216.287453] cpuidle: using governor ladder
[ 216.287901] NET: Registered protocol family 1
[ 216.287978] Using IPI Shortcut mode
[ 216.288071] registered taskstats version 1
[ 216.288332] Magic number: 0:420:194
[ 216.288441] hash matches device ttys6
[ 216.288662] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 216.288670] EDD information not available.
[ 216.290327] Freeing unused kernel memory: 364k freed
[ 216.309612] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 218.238302] fuse init (API version 7.9)
[ 218.336572] ACPI: CPU0 (power states: C1[C1] C2[C2])
[ 218.336588] ACPI: Processor [CPU0] (supports 2 throttling states)
[ 218.413059] device-mapper: uevent: version 1.0.3
[ 218.413182] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised:
[EMAIL PROTECTED]
[ 218.490255] md: linear personality registered for level -1
[ 218.511606] md: multipath personality registered for level -4
[ 218.533444] md: raid0 personality registered for level 0
[ 218.556678] md: raid1 personality registered for level 1
[ 218.578441] xor: automatically using best checksumming function: pIII_sse
[ 218.598350] pIII_sse : 2166.000 MB/sec
[ 218.598358] xor: using function: pIII_sse (2166.000 MB/sec)
[ 218.600735] async_tx: api initialized (async)
[ 218.678480] raid6: int32x1 118 MB/s
[ 218.746665] raid6: int32x2 164 MB/s
[ 218.814511] raid6: int32x4 166 MB/s
[ 218.882762] raid6: int32x8 125 MB/s
[ 218.950430] raid6: mmxx1 355 MB/s
[ 219.018324] raid6: mmxx2 493 MB/s
[ 219.086389] raid6: sse1x1 306 MB/s
[ 219.154242] raid6: sse1x2 473 MB/s
[ 219.154249] raid6: using algorithm sse1x2 (473 MB/s)
[ 219.154259] md: raid6 personality registered for level 6
[ 219.154267] md: raid5 personality registered for level 5
[ 219.154274] md: raid4 personality registered for level 4
[ 219.285980] md: raid10 personality registered for level 10
[ 220.662175] usbcore: registered new interface driver usbfs
[ 220.662232] usbcore: registered new interface driver hub
[ 220.704294] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
[ 220.704307] PCI: setting IRQ 5 as level-triggered
[ 220.704316] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LNKB] -> GSI 5
(level, low) -> IRQ 5
[ 220.757272] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[5]
MMIO=[de000000-de0007ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 220.810014] usbcore: registered new device driver usb
[ 220.814408] USB Universal Host Controller Interface driver v3.0
[ 221.336703] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald Becker
[ 221.336721] via-rhine: Broken BIOS detected, avoid_D3 enabled.
[ 221.337261] SCSI subsystem initialized
[ 221.494936] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 221.494949] PCI: setting IRQ 11 as level-triggered
[ 221.494959] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 221.494987] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 221.495711] uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus
number 1
[ 221.495759] uhci_hcd 0000:00:10.0: irq 11, io base 0x0000d400
[ 221.496162] usb usb1: configuration #1 chosen from 1 choice
[ 221.496241] hub 1-0:1.0: USB hub found
[ 221.496256] hub 1-0:1.0: 2 ports detected
[ 221.598094] ACPI: PCI Interrupt 0000:00:10.1[B] -> Link [LNKB] -> GSI 5
(level, low) -> IRQ 5
[ 221.598127] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 221.598200] uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus
number 2
[ 221.598241] uhci_hcd 0000:00:10.1: irq 5, io base 0x0000d800
[ 221.598583] usb usb2: configuration #1 chosen from 1 choice
[ 221.598656] hub 2-0:1.0: USB hub found
[ 221.598671] hub 2-0:1.0: 2 ports detected
[ 221.702983] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 221.702997] PCI: setting IRQ 10 as level-triggered
[ 221.703006] ACPI: PCI Interrupt 0000:00:10.2[C] -> Link [LNKC] -> GSI 10
(level, low) -> IRQ 10
[ 221.703033] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 221.703111] uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus
number 3
[ 221.703157] uhci_hcd 0000:00:10.2: irq 10, io base 0x0000dc00
[ 221.703502] usb usb3: configuration #1 chosen from 1 choice
[ 221.703566] hub 3-0:1.0: USB hub found
[ 221.703581] hub 3-0:1.0: 2 ports detected
[ 221.757774] libata version 3.00 loaded.
[ 221.807315] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11
[ 221.807329] ACPI: PCI Interrupt 0000:00:10.3[D] -> Link [LNKD] -> GSI 11
(level, low) -> IRQ 11
[ 221.807363] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 221.807453] ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus
number 4
[ 221.807549] ehci_hcd 0000:00:10.3: irq 11, io mem 0xde001000
[ 221.817731] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 221.818084] usb usb4: configuration #1 chosen from 1 choice
[ 221.818151] hub 4-0:1.0: USB hub found
[ 221.818169] hub 4-0:1.0: 6 ports detected
[ 221.922275] ACPI: PCI Interrupt 0000:00:12.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 221.926936] eth0: VIA Rhine II at 0xde002000, 00:40:63:e8:97:83, IRQ 11.
[ 221.927655] eth0: MII PHY found at address 1, status 0x7869 advertising 05e1
Link 45e1.
[ 221.940702] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 221.940723] PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11
[ 221.940851] ACPI: PCI interrupt for device 0000:00:11.1 disabled
[ 221.993931] pata_via 0000:00:11.1: version 0.3.3
[ 221.993983] ACPI: PCI Interrupt 0000:00:11.1[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 221.994000] PCI: VIA VLink IRQ fixup for 0000:00:11.1, from 255 to 11
[ 222.044702] scsi0 : pata_via
[ 222.085037] scsi1 : pata_via
[ 222.089334] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xe000 irq 14
[ 222.089347] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xe008 irq 15
[ 222.569329] FDC 0 is a post-1991 82077
[ 222.574139] ata2.00: ATAPI: MATSHITADVD-RAM UJ-845S, D100, max UDMA/33
[ 222.605598] usb 4-4: new high speed USB device using ehci_hcd and address 2
[ 222.746036] ata2.00: configured for UDMA/33
[ 222.747842] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ-845S D100
PQ: 0 ANSI: 5
[ 222.749206] usb 4-4: configuration #1 chosen from 1 choice
[ 222.749773] hub 4-0:1.0: over-current change on port 5
[ 222.771997] ieee1394: Node added: ID:BUS[0-00:1023] GUID[0030e002e0718793]
[ 222.772196] ieee1394: Host added: ID:BUS[0-01:1023] GUID[0040635000083473]
[ 224.838842] Driver 'sr' needs updating - please use bus_type methods
[ 224.856936] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
caddy
[ 224.856954] Uniform CD-ROM driver Revision: 3.20
[ 224.857171] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 224.881415] sr 1:0:0:0: Attached scsi generic sg0 type 5
[ 224.990105] usbcore: registered new interface driver libusual
[ 225.008173] Initializing USB Mass Storage driver...
[ 225.035245] scsi2 : SCSI emulation for USB Mass Storage devices
[ 225.037207] usbcore: registered new interface driver usb-storage
[ 225.037226] USB Mass Storage support registered.
[ 225.037539] usb-storage: device found at 2
[ 225.037546] usb-storage: waiting for device to settle before scanning
[ 225.090323] scsi3 : SBP-2 IEEE-1394
[ 226.471922] ieee1394: sbp2: Logged into SBP-2 device
[ 226.473535] ieee1394: sbp2: Node 0-00:1023: Max speed [S400] - Max payload
[2048]
[ 226.479418] scsi 3:0:0:0: Direct-Access Ext Hard Disk
PQ: 0 ANSI: 4
[ 226.479634] scsi 3:0:0:0: Attached scsi generic sg1 type 0
[ 226.500997] Driver 'sd' needs updating - please use bus_type methods
[ 226.505790] sd 3:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 226.509505] sd 3:0:0:0: [sda] Write Protect is off
[ 226.509522] sd 3:0:0:0: [sda] Mode Sense: 10 00 00 00
[ 226.511818] sd 3:0:0:0: [sda] Cache data unavailable
[ 226.511831] sd 3:0:0:0: [sda] Assuming drive cache: write through
[ 226.516660] sd 3:0:0:0: [sda] 234441648 512-byte hardware sectors (120034 MB)
[ 226.519607] sd 3:0:0:0: [sda] Write Protect is off
[ 226.519617] sd 3:0:0:0: [sda] Mode Sense: 10 00 00 00
[ 226.521946] sd 3:0:0:0: [sda] Cache data unavailable
[ 226.521954] sd 3:0:0:0: [sda] Assuming drive cache: write through
[ 226.521968] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
[ 226.967281] sd 3:0:0:0: [sda] Attached SCSI disk
[ 227.552849] EXT3-fs: INFO: recovery required on readonly filesystem.
[ 227.552864] EXT3-fs: write access will be enabled during recovery.
[ 228.215978] kjournald starting. Commit interval 5 seconds
[ 228.216026] EXT3-fs: sda3: orphan cleanup on readonly fs
[ 228.216044] ext3_orphan_cleanup: deleting unreferenced inode 753687
[ 228.216111] EXT3-fs: sda3: 1 orphan inode deleted
[ 228.216117] EXT3-fs: recovery complete.
[ 228.225297] EXT3-fs: mounted filesystem with ordered data mode.
[ 230.036424] usb-storage: device scan complete
[ 230.037553] scsi 2:0:0:0: Direct-Access BLANK Patriot Memory PMAP
PQ: 0 ANSI: 0 CCS
[ 230.039733] sd 2:0:0:0: [sdb] 2015232 512-byte hardware sectors (1032 MB)
[ 230.040355] sd 2:0:0:0: [sdb] Write Protect is off
[ 230.040364] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 230.040372] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 230.043998] sd 2:0:0:0: [sdb] 2015232 512-byte hardware sectors (1032 MB)
[ 230.044606] sd 2:0:0:0: [sdb] Write Protect is off
[ 230.044616] sd 2:0:0:0: [sdb] Mode Sense: 23 00 00 00
[ 230.044624] sd 2:0:0:0: [sdb] Assuming drive cache: write through
[ 230.044637] sdb: sdb1 sdb2
[ 230.045580] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 230.045688] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 246.559758] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 246.603668] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 247.027559] Linux agpgart interface v0.102
[ 247.107082] agpgart: Detected VIA CLE266 chipset
[ 247.256856] agpgart: AGP aperture is 128M @ 0xd0000000
[ 247.318842] irda_init()
[ 247.318885] NET: Registered protocol family 23
[ 247.737852] input: PC Speaker as /devices/platform/pcspkr/input/input2
[ 250.066278] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
[ 250.543336] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11
(level, low) -> IRQ 11
[ 250.546576] input: Power Button (FF) as /devices/virtual/input/input3
[ 250.563946] ACPI: Power Button (FF) [PWRF]
[ 250.564269] input: Power Button (CM) as /devices/virtual/input/input4
[ 250.647744] ACPI: Power Button (CM) [PWRB]
[ 251.924298] Console: switching to colour frame buffer device 80x30
[ 251.924329] fb0: VIA VT8623 on 0000:01:00.0, 32 MB RAM
[ 253.177038] input: PS/2 Generic Mouse as
/devices/platform/i8042/serio1/input/input5
[ 256.210981] NET: Registered protocol family 10
[ 256.211580] lo: Disabled Privacy Extensions
[ 257.418638] Real Time Clock Driver v1.12ac
[ 257.886554] ACPI: PCI Interrupt 0000:00:11.5[C] -> Link [LNKC] -> GSI 10
(level, low) -> IRQ 10
[ 257.886718] PCI: Setting latency timer of device 0000:00:11.5 to 64
[ 259.636811] parport_pc 00:0b: reported by Plug and Play ACPI
[ 259.636851] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 266.717063] eth0: no IPv6 routers present
[ 267.277849] lp0: using parport0 (interrupt-driven).
[ 267.769567] Adding 1558264k swap on /dev/sda1. Priority:-1 extents:1
across:1558264k
[ 268.500873] EXT3 FS on sda3, internal journal
[ 271.362423] kjournald starting. Commit interval 5 seconds
[ 271.362838] EXT3 FS on sda5, internal journal
[ 271.362851] EXT3-fs: mounted filesystem with ordered data mode.
[ 271.387749] kjournald starting. Commit interval 5 seconds
[ 271.388189] EXT3 FS on sda6, internal journal
[ 271.388202] EXT3-fs: mounted filesystem with ordered data mode.
[ 271.410252] kjournald starting. Commit interval 5 seconds
[ 271.410710] EXT3 FS on sda7, internal journal
[ 271.410723] EXT3-fs: mounted filesystem with ordered data mode.
[ 272.768678] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 275.131646] NET: Registered protocol family 17
[ 282.297153] No dock devices found.
[ 283.801045] longhaul: VIA C3 'Nehemiah C' [C5P] CPU detected. Powersaver
supported.
[ 283.801084] longhaul: ACPI I/O at 0x400
[ 283.801124] longhaul: Using northbridge support.
[ 283.801130] longhaul: Using ACPI support.
[ 288.545618] ppdev: user-space parallel port driver
[ 288.840852] audit(1215634336.888:2): type=1503 operation="inode_permission"
requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5311
profile="/usr/sbin/cupsd" namespace="default"
[ 289.048729] [drm] Initialized drm 1.1.0 20060810
[ 289.067561] [drm] Initialized via 2.11.1 20070202 on minor 0
[ 289.099322] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0.
[ 289.099363] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
[ 289.099432] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[ 289.162942] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 289.162958] apm: overridden by ACPI.
[ 552.647708] Marking TSC unstable due to: cpufreq changes.
[ 552.650949] Time: acpi_pm clocksource has been installed.
[ 295.236596] Clocksource tsc unstable (delta = -226039516 ns)
** Affects: ubuntu
Importance: Undecided
Status: New
--
Hardy freezes on EPIA Via when switching screens
https://bugs.launchpad.net/bugs/247071
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
