** Description changed:
Ubuntu Hardy final release. My NIC RTL8111/8168B does not receive an IP
address. After starting the computer, icon of the NetworkManager is
animated. When it stops the wired network is reported as connected but
there are all zeros (IP address, gateway, etc.) I booted from Gutsy CD
and the NIC worked correctly.
Output from lspci -vvnn from Hardy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 509
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
Output from lspci -vvnn from Gutsy
01:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd.
RTL8111/8168B PCI Express Gigabit Ethernet controller [10ec:8168] (rev 01)
Subsystem: ASUSTeK Computer Inc. Unknown device [1043:11f5]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort-
<TAbort- <MAbort- >SERR+ <PERR-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 18
Region 0: I/O ports at c800 [size=256]
Region 2: Memory at dcfff000 (64-bit, non-prefetchable) [size=4K]
Expansion ROM at dcfe0000 [disabled] [size=64K]
Capabilities: <access denied>
ifconfig from Hardy
eth0 Link encap:Ethernet HWaddr 00:1b:fc:9d:72:9f
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:63 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
Interrupt:253
ifconfig from Gutsy
eth0 Link encap:Ethernet HWaddr 00:1B:FC:9D:72:9F
inet addr:147.32.112.20 Bcast:147.32.112.255 Mask:255.255.255.0
inet6 addr: 2001:718:2:21:21b:fcff:fe9d:729f/64 Scope:Global
inet6 addr: fe80::21b:fcff:fe9d:729f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1267 errors:0 dropped:0 overruns:0 frame:0
TX packets:47 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:128133 (125.1 KB) TX bytes:6628 (6.4 KB)
Interrupt:18 Base address:0x8000
TEST CASE:
1. find the card in lspci
2. notice that ifconfig lists the interface
3. check your connection (eg. sudo dhclient3)
4. notice that you don't receive any packets at all
LATEST VERSION TESTED:
Regression since 2.6.24-16, still does not work in 2.6.24-19.33.
+ Works with 2.6.26-2.6. Did not test 2.6.26-1.*
--
RTL8111/8168B does not work in Hardy
https://bugs.launchpad.net/bugs/221499
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
