Hello! Ok, Here is the output from dmraid -n and dmesg
I just want you to know, that I one more drive connected now, an external usb 2 2,5" harddrive (Western Digital - My passport), but I hope that this does not disturb the other harddrives that are already connected? ================================ ERROR: isw: Error finding disk table slot for /dev/sdb /dev/sdd (isw): 0x000 sig: " Intel Raid ISM Cfg Sig. 1.2.01" 0x020 check_sum: 3672989414 0x024 mpb_size: 532 0x028 family_num: 3743536290 0x02c generation_num: 549 0x030 reserved[0]: 4080 0x034 reserved[1]: 3221225472 0x038 num_disks: 3 0x039 num_raid_devs: 1 0x03a fill[0]: 2 0x03b fill[1]: 0 0x03c filler[0]: 100714757 0x0d8 disk[0].serial: " S0NFJDSP605038" 0x0e8 disk[0].totalBlocks: 781422768 0x0ec disk[0].scsiId: 0x100 0x0f0 disk[0].status: 0x13a 0x108 disk[1].serial: "02F__________0_A0`8:" 0x118 disk[1].totalBlocks: 976773168 0x11c disk[1].scsiId: 0x10000 0x120 disk[1].status: 0x13a 0x138 disk[2].serial: " S0NFJDSP605052" 0x148 disk[2].totalBlocks: 781422768 0x14c disk[2].scsiId: 0x10100 0x150 disk[2].status: 0x13a 0x168 isw_dev[0].volume: " FTP" 0x17c isw_dev[0].SizeHigh: 0 0x178 isw_dev[0].SizeLow: 2344253440 0x180 isw_dev[0].status: 0xc 0x184 isw_dev[0].reserved_blocks: 0 0x188 isw_dev[0].filler[0]: 65536 0x1c0 isw_dev[0].vol.migr_state: 0 0x1c1 isw_dev[0].vol.migr_type: 0 0x1c2 isw_dev[0].vol.dirty: 0 0x1c3 isw_dev[0].vol.fill[0]: 0 0x1d8 isw_dev[0].vol.map.pba_of_lba0: 0 0x1dc isw_dev[0].vol.map.blocks_per_member: 781418243 0x1e0 isw_dev[0].vol.map.num_data_stripes: 3052414 0x1e4 isw_dev[0].vol.map.blocks_per_strip: 256 0x1e6 isw_dev[0].vol.map.map_state: 0 0x1e7 isw_dev[0].vol.map.raid_level: 0 0x1e8 isw_dev[0].vol.map.num_members: 3 0x1e9 isw_dev[0].vol.map.reserved[0]: 1 0x1ea isw_dev[0].vol.map.reserved[1]: 255 0x1eb isw_dev[0].vol.map.reserved[2]: 1 0x208 isw_dev[0].vol.map.disk_ord_tbl[0]: 0x0 0x20c isw_dev[0].vol.map.disk_ord_tbl[1]: 0x1 0x210 isw_dev[0].vol.map.disk_ord_tbl[2]: 0x2 /dev/sdc (isw): 0x000 sig: " Intel Raid ISM Cfg Sig. 1.2.01" 0x020 check_sum: 3672989414 0x024 mpb_size: 532 0x028 family_num: 3743536290 0x02c generation_num: 549 0x030 reserved[0]: 4080 0x034 reserved[1]: 3221225472 0x038 num_disks: 3 0x039 num_raid_devs: 1 0x03a fill[0]: 2 0x03b fill[1]: 0 0x03c filler[0]: 100714757 0x0d8 disk[0].serial: " S0NFJDSP605038" 0x0e8 disk[0].totalBlocks: 781422768 0x0ec disk[0].scsiId: 0x100 0x0f0 disk[0].status: 0x13a 0x108 disk[1].serial: "02F__________0_A0`8:" 0x118 disk[1].totalBlocks: 976773168 0x11c disk[1].scsiId: 0x10000 0x120 disk[1].status: 0x13a 0x138 disk[2].serial: " S0NFJDSP605052" 0x148 disk[2].totalBlocks: 781422768 0x14c disk[2].scsiId: 0x10100 0x150 disk[2].status: 0x13a 0x168 isw_dev[0].volume: " FTP" 0x17c isw_dev[0].SizeHigh: 0 0x178 isw_dev[0].SizeLow: 2344253440 0x180 isw_dev[0].status: 0xc 0x184 isw_dev[0].reserved_blocks: 0 0x188 isw_dev[0].filler[0]: 65536 0x1c0 isw_dev[0].vol.migr_state: 0 0x1c1 isw_dev[0].vol.migr_type: 0 0x1c2 isw_dev[0].vol.dirty: 0 0x1c3 isw_dev[0].vol.fill[0]: 0 0x1d8 isw_dev[0].vol.map.pba_of_lba0: 0 0x1dc isw_dev[0].vol.map.blocks_per_member: 781418243 0x1e0 isw_dev[0].vol.map.num_data_stripes: 3052414 0x1e4 isw_dev[0].vol.map.blocks_per_strip: 256 0x1e6 isw_dev[0].vol.map.map_state: 0 0x1e7 isw_dev[0].vol.map.raid_level: 0 0x1e8 isw_dev[0].vol.map.num_members: 3 0x1e9 isw_dev[0].vol.map.reserved[0]: 1 0x1ea isw_dev[0].vol.map.reserved[1]: 255 0x1eb isw_dev[0].vol.map.reserved[2]: 1 0x208 isw_dev[0].vol.map.disk_ord_tbl[0]: 0x0 0x20c isw_dev[0].vol.map.disk_ord_tbl[1]: 0x1 0x210 isw_dev[0].vol.map.disk_ord_tbl[2]: 0x2 ================================== dmesg ================================== [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.24-19-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 4 16:35:01 UTC 2008 (Ubuntu 2.6.24-19.33-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 0000000000099000 (usable) [ 0.000000] BIOS-e820: 0000000000099000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000c7f80000 (usable) [ 0.000000] BIOS-e820: 00000000c7f80000 - 00000000c7f8e000 (ACPI data) [ 0.000000] BIOS-e820: 00000000c7f8e000 - 00000000c7fe0000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000c7fe0000 - 00000000c8000000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] 2303MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000ff780 [ 0.000000] Entering add_active_range(0, 0, 819072) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 819072 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 819072 [ 0.000000] On node 0 totalpages: 819072 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 4607 pages used for memmap [ 0.000000] HighMem zone: 585089 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] ACPI: RSDP signature @ 0xC00FAF00 checksum 0 [ 0.000000] ACPI: RSDP 000FAF00, 0024 (r2 ACPIAM) [ 0.000000] ACPI: XSDT C7F80100, 004C (r1 A_M_I_ OEMXSDT 3000820 MSFT 97) [ 0.000000] ACPI: FACP C7F80290, 00F4 (r3 A_M_I_ OEMFACP 3000820 MSFT 97) [ 0.000000] ACPI: DSDT C7F80590, 9554 (r1 A0543 A0543000 0 INTL 20060113) [ 0.000000] ACPI: FACS C7F8E000, 0040 [ 0.000000] ACPI: APIC C7F80390, 0080 (r1 A_M_I_ OEMAPIC 3000820 MSFT 97) [ 0.000000] ACPI: OEMB C7F8E040, 0066 (r1 A_M_I_ AMI_OEM 3000820 MSFT 97) [ 0.000000] ACPI: HPET C7F89AF0, 0038 (r1 A_M_I_ OEMHPET 3000820 MSFT 97) [ 0.000000] ACPI: MCFG C7F89B30, 003C (r1 A_M_I_ OEMMCFG 3000820 MSFT 97) [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] Processor #0 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] Processor #1 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) [ 0.000000] Processor #2 6:15 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled) [ 0.000000] Processor #3 6:15 APIC version 20 [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 4, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at cc000000 (gap: c8000000:37b00000) [ 0.000000] swsusp: Registered nosave memory region: 0000000000099000 - 00000000000a0000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000e4000 [ 0.000000] swsusp: Registered nosave memory region: 00000000000e4000 - 0000000000100000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 812673 [ 0.000000] Kernel command line: root=UUID=f3576ebc-512b-4029-8266-f7f9c89eb426 ro quiet splash [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 2404.125 MHz processor. [ 48.460131] Console: colour VGA+ 80x25 [ 48.460133] console [tty0] enabled [ 48.460304] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 48.460498] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 48.579479] Memory: 3236808k/3276288k available (2177k kernel code, 38240k reserved, 1006k data, 368k init, 2358784k highmem) [ 48.579484] virtual kernel memory layout: [ 48.579485] fixmap : 0xfff4b000 - 0xfffff000 ( 720 kB) [ 48.579485] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 48.579486] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 48.579487] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 48.579488] .init : 0xc0421000 - 0xc047d000 ( 368 kB) [ 48.579488] .data : 0xc0320434 - 0xc041bdc4 (1006 kB) [ 48.579489] .text : 0xc0100000 - 0xc0320434 (2177 kB) [ 48.579491] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 48.579527] SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 [ 48.579633] hpet clockevent registered [ 48.659460] Calibrating delay using timer specific routine.. 4811.69 BogoMIPS (lpj=9623391) [ 48.659477] Security Framework initialized [ 48.659482] SELinux: Disabled at boot. [ 48.659493] AppArmor: AppArmor initialized [ 48.659496] Failure registering capabilities with primary security module. [ 48.659502] Mount-cache hash table entries: 512 [ 48.659600] Initializing cgroup subsys ns [ 48.659604] Initializing cgroup subsys cpuacct [ 48.659612] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 48.659617] monitor/mwait feature present. [ 48.659618] using mwait in idle threads. [ 48.659621] CPU: L1 I cache: 32K, L1 D cache: 32K [ 48.659623] CPU: L2 cache: 4096K [ 48.659625] CPU: Physical Processor ID: 0 [ 48.659626] CPU: Processor Core ID: 0 [ 48.659627] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 48.659634] Compat vDSO mapped to ffffe000. [ 48.659644] Checking 'hlt' instruction... OK. [ 48.675759] SMP alternatives: switching to UP code [ 48.676950] Early unpacking initramfs... done [ 48.920983] ACPI: Core revision 20070126 [ 48.921022] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 48.936497] CPU0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 48.936511] SMP alternatives: switching to SMP code [ 48.937043] Booting processor 1/1 eip 3000 [ 48.947289] Initializing CPU#1 [ 49.086512] Calibrating delay using timer specific routine.. 12020.47 BogoMIPS (lpj=24040953) [ 49.086516] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 49.086520] monitor/mwait feature present. [ 49.086522] CPU: L1 I cache: 32K, L1 D cache: 32K [ 49.086524] CPU: L2 cache: 4096K [ 49.086525] CPU: Physical Processor ID: 0 [ 49.086526] CPU: Processor Core ID: 1 [ 49.086527] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 49.087109] CPU1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 49.087129] SMP alternatives: switching to SMP code [ 49.087667] Booting processor 2/2 eip 3000 [ 49.097913] Initializing CPU#2 [ 49.178308] Calibrating delay using timer specific routine.. 4808.26 BogoMIPS (lpj=9616535) [ 49.178313] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 49.178317] monitor/mwait feature present. [ 49.178319] CPU: L1 I cache: 32K, L1 D cache: 32K [ 49.178320] CPU: L2 cache: 4096K [ 49.178322] CPU: Physical Processor ID: 0 [ 49.178323] CPU: Processor Core ID: 2 [ 49.178324] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 49.178950] CPU2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 49.178962] SMP alternatives: switching to SMP code [ 49.179319] Booting processor 3/3 eip 3000 [ 49.189571] Initializing CPU#3 [ 49.266114] Calibrating delay using timer specific routine.. 4808.25 BogoMIPS (lpj=9616500) [ 49.266118] CPU: After generic identify, caps: bfebfbff 20000000 00000000 00000000 0000e3bd 00000000 00000001 00000000 [ 49.266122] monitor/mwait feature present. [ 49.266124] CPU: L1 I cache: 32K, L1 D cache: 32K [ 49.266125] CPU: L2 cache: 4096K [ 49.266127] CPU: Physical Processor ID: 0 [ 49.266128] CPU: Processor Core ID: 3 [ 49.266129] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 0000e3bd 00000000 00000001 00000000 [ 49.266701] CPU3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz stepping 0b [ 49.266715] Total of 4 processors activated (26448.68 BogoMIPS). [ 49.266840] ENABLING IO-APIC IRQs [ 49.266996] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 49.413855] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 49.433844] checking TSC synchronization [CPU#0 -> CPU#2]: passed. [ 49.453841] checking TSC synchronization [CPU#0 -> CPU#3]: passed. [ 49.473813] Brought up 4 CPUs [ 49.473850] CPU0 attaching sched-domain: [ 49.473852] domain 0: span 03 [ 49.473853] groups: 01 02 [ 49.473855] domain 1: span 0f [ 49.473857] groups: 03 0c [ 49.473858] CPU1 attaching sched-domain: [ 49.473860] domain 0: span 03 [ 49.473861] groups: 02 01 [ 49.473862] domain 1: span 0f [ 49.473863] groups: 03 0c [ 49.473865] CPU2 attaching sched-domain: [ 49.473866] domain 0: span 0c [ 49.473867] groups: 04 08 [ 49.473869] domain 1: span 0f [ 49.473870] groups: 0c 03 [ 49.473872] CPU3 attaching sched-domain: [ 49.473873] domain 0: span 0c [ 49.473874] groups: 08 04 [ 49.473876] domain 1: span 0f [ 49.473877] groups: 0c 03 [ 49.474101] net_namespace: 64 bytes [ 49.474108] Booting paravirtualized kernel on bare hardware [ 49.474419] Time: 11:00:19 Date: 06/18/08 [ 49.474434] NET: Registered protocol family 16 [ 49.474554] EISA bus registered [ 49.474557] ACPI: bus type pci registered [ 49.474711] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5 [ 49.474713] PCI: Using configuration type 1 [ 49.474726] Setting up standard PCI resources [ 49.483755] ACPI: EC: Look up EC in DSDT [ 49.489931] ACPI: Interpreter enabled [ 49.489939] ACPI: (supports S0 S1 S3 S4 S5) [ 49.489950] ACPI: Using IOAPIC for interrupt routing [ 49.494541] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 49.495015] PCI quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 49.495018] PCI quirk: region 0480-04bf claimed by ICH6 GPIO [ 49.495692] PCI: Transparent bridge - 0000:00:1e.0 [ 49.495719] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 49.495827] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 49.495893] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P3._PRT] [ 49.495982] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 49.496047] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P7._PRT] [ 49.496104] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 49.497899] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 49.497991] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *7 10 11 12 14 15) [ 49.498082] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 10 11 12 14 15) [ 49.498172] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 49.498262] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 49.498352] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 *5 6 7 10 11 12 14 15) [ 49.498442] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15) [ 49.498532] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *10 11 12 14 15) [ 49.498617] ACPI Warning (tbutils-0217): Incorrect checksum in table [OEMB] - 7D, should be 74 [20070126] [ 49.498623] Linux Plug and Play Support v0.97 (c) Adam Belay [ 49.498642] pnp: PnP ACPI init [ 49.498647] ACPI: bus type pnp registered [ 49.500849] pnp: PnP ACPI: found 14 devices [ 49.500851] ACPI: ACPI bus type pnp unregistered [ 49.500854] PnPBIOS: Disabled by ACPI PNP [ 49.500998] PCI: Using ACPI for IRQ routing [ 49.501000] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 49.529622] NET: Registered protocol family 8 [ 49.529624] NET: Registered protocol family 20 [ 49.529659] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 49.529663] hpet0: 3 64-bit timers, 14318180 Hz [ 49.530686] AppArmor: AppArmor Filesystem Enabled [ 49.533584] Time: tsc clocksource has been installed. [ 49.533595] Switched to high resolution mode on CPU 0 [ 49.533656] Switched to high resolution mode on CPU 1 [ 49.533962] Switched to high resolution mode on CPU 2 [ 49.534003] Switched to high resolution mode on CPU 3 [ 49.550062] system 00:01: iomem range 0xfed13000-0xfed19fff has been reserved [ 49.550072] system 00:07: ioport range 0x290-0x297 has been reserved [ 49.550077] system 00:08: ioport range 0x4d0-0x4d1 has been reserved [ 49.550080] system 00:08: ioport range 0x800-0x87f has been reserved [ 49.550083] system 00:08: ioport range 0x400-0x41f has been reserved [ 49.550085] system 00:08: ioport range 0x480-0x4bf has been reserved [ 49.550088] system 00:08: iomem range 0xfed1c000-0xfed1ffff has been reserved [ 49.550091] system 00:08: iomem range 0xfed20000-0xfed3ffff has been reserved [ 49.550094] system 00:08: iomem range 0xfed50000-0xfed8ffff has been reserved [ 49.550097] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved [ 49.550100] system 00:08: iomem range 0xfff00000-0xffffffff could not be reserved [ 49.550106] system 00:0a: iomem range 0xfec00000-0xfec00fff has been reserved [ 49.550109] system 00:0a: iomem range 0xfee00000-0xfee00fff has been reserved [ 49.550115] system 00:0c: iomem range 0xf0000000-0xf3ffffff has been reserved [ 49.550122] system 00:0d: iomem range 0x0-0x9ffff could not be reserved [ 49.550124] system 00:0d: iomem range 0xc0000-0xdffff could not be reserved [ 49.550127] system 00:0d: iomem range 0xe0000-0xfffff could not be reserved [ 49.550130] system 00:0d: iomem range 0x100000-0xc7ffffff could not be reserved [ 49.550133] system 00:0d: iomem range 0x0-0x0 could not be reserved [ 49.580365] PCI: Bridge: 0000:00:01.0 [ 49.580367] IO window: c000-cfff [ 49.580369] MEM window: f8a00000-feafffff [ 49.580372] PREFETCH window: cff00000-efefffff [ 49.580374] PCI: Bridge: 0000:00:1c.0 [ 49.580375] IO window: disabled. [ 49.580378] MEM window: disabled. [ 49.580381] PREFETCH window: cfe00000-cfefffff [ 49.580384] PCI: Bridge: 0000:00:1c.3 [ 49.580386] IO window: b000-bfff [ 49.580390] MEM window: f8900000-f89fffff [ 49.580392] PREFETCH window: disabled. [ 49.580396] PCI: Bridge: 0000:00:1c.4 [ 49.580397] IO window: a000-afff [ 49.580401] MEM window: f8800000-f88fffff [ 49.580403] PREFETCH window: disabled. [ 49.580407] PCI: Bridge: 0000:00:1e.0 [ 49.580408] IO window: disabled. [ 49.580411] MEM window: f8500000-f87fffff [ 49.580414] PREFETCH window: disabled. [ 49.580425] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 49.580429] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 49.580442] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 49.580445] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 49.580459] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 49.580463] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 49.580476] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 49.580480] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 49.580488] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 49.580496] NET: Registered protocol family 2 [ 49.617918] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 49.618100] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 49.618416] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 49.618565] TCP: Hash tables configured (established 131072 bind 65536) [ 49.618567] TCP reno registered [ 49.629961] checking if image is initramfs... it is [ 50.109984] Freeing initrd memory: 7541k freed [ 50.111064] audit: initializing netlink socket (disabled) [ 50.111077] audit(1213786818.309:1): initialized [ 50.111336] highmem bounce pool size: 64 pages [ 50.113522] VFS: Disk quotas dquot_6.5.1 [ 50.113596] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 50.113729] io scheduler noop registered [ 50.113731] io scheduler anticipatory registered [ 50.113733] io scheduler deadline registered [ 50.113743] io scheduler cfq registered (default) [ 50.113835] Boot video device is 0000:05:00.0 [ 50.113942] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 50.113983] assign_interrupt_mode Found MSI capability [ 50.114011] Allocate Port Service[0000:00:01.0:pcie00] [ 50.114088] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 50.114120] assign_interrupt_mode Found MSI capability [ 50.114146] Allocate Port Service[0000:00:1c.0:pcie00] [ 50.114183] Allocate Port Service[0000:00:1c.0:pcie02] [ 50.114264] PCI: Setting latency timer of device 0000:00:1c.3 to 64 [ 50.114302] assign_interrupt_mode Found MSI capability [ 50.114333] Allocate Port Service[0000:00:1c.3:pcie00] [ 50.114414] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 50.114452] assign_interrupt_mode Found MSI capability [ 50.114483] Allocate Port Service[0000:00:1c.4:pcie00] [ 50.114734] isapnp: Scanning for PnP cards... [ 50.466845] isapnp: No Plug & Play device found [ 50.494687] Real Time Clock Driver v1.12ac [ 50.494857] hpet_resources: 0xfed00000 is busy [ 50.494882] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 50.494997] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 50.495584] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 50.496412] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 50.496477] input: Macintosh mouse button emulation as /devices/virtual/input/input0 [ 50.496631] PNP: No PS/2 controller found. Probing ports directly. [ 50.499350] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 50.499356] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 50.527424] mice: PS/2 mouse device common for all mice [ 50.527539] EISA: Probing bus 0 at eisa.0 [ 50.527564] EISA: Detected 0 cards. [ 50.527566] cpuidle: using governor ladder [ 50.527567] cpuidle: using governor menu [ 50.527638] NET: Registered protocol family 1 [ 50.527664] Using IPI No-Shortcut mode [ 50.527688] registered taskstats version 1 [ 50.527776] Magic number: 12:478:24 [ 50.527861] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 50.527862] EDD information not available. [ 50.527996] Freeing unused kernel memory: 368k freed [ 51.685615] fuse init (API version 7.9) [ 51.702359] ACPI: Processor [CPU1] (supports 8 throttling states) [ 51.702773] ACPI: Processor [CPU2] (supports 8 throttling states) [ 51.703208] ACPI: Processor [CPU3] (supports 8 throttling states) [ 51.703651] ACPI: Processor [CPU4] (supports 8 throttling states) [ 51.887217] usbcore: registered new interface driver usbfs [ 51.887233] usbcore: registered new interface driver hub [ 51.887402] SCSI subsystem initialized [ 51.892490] usbcore: registered new device driver usb [ 51.892584] libata version 3.00 loaded. [ 51.894067] ahci 0000:00:1f.2: version 3.0 [ 51.894092] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 23 (level, low) -> IRQ 18 [ 51.894140] ahci 0000:00:1f.2: enabling ASUS P5W DH Deluxe on-board SIMG4726 workaround [ 51.894900] USB Universal Host Controller Interface driver v3.0 [ 51.920837] Floppy drive(s): fd0 is 1.44M [ 51.941302] FDC 0 is a post-1991 82077 [ 52.894027] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl RAID mode [ 52.894031] ahci 0000:00:1f.2: flags: 64bit ncq led clo pio slum part [ 52.894036] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 52.894232] scsi0 : ahci [ 52.894296] scsi1 : ahci [ 52.894336] scsi2 : ahci [ 52.894376] scsi3 : ahci [ 52.894437] ata1: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfebfb900 irq 219 [ 52.894440] ata2: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfebfb980 irq 219 [ 52.894442] ata3: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfebfba00 irq 219 [ 52.894444] ata4: SATA max UDMA/133 abar [EMAIL PROTECTED] port 0xfebfba80 irq 219 [ 53.368936] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 53.377088] ata1.00: ATA-8: WDC WD3200AAKS-00C9A0, 12.01B02, max UDMA/133 [ 53.377092] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 53.377856] ata1.00: configured for UDMA/133 [ 55.863309] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 55.863383] ata2.00: ATA-6: External Disk 0, RGL10364, max UDMA/133 [ 55.863387] ata2.00: 976773168 sectors, multi 1: LBA48 [ 55.863494] ata2.00: configured for UDMA/133 [ 56.338235] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 56.350445] ata3.00: ATA-8: SAMSUNG HD403LJ, CT100-11, max UDMA7 [ 56.350448] ata3.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 56.352434] ata3.00: configured for UDMA/133 [ 56.825136] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 56.827054] ata4.00: ATA-8: SAMSUNG HD403LJ, CT100-11, max UDMA7 [ 56.827057] ata4.00: 781422768 sectors, multi 16: LBA48 NCQ (depth 31/32) [ 56.829041] ata4.00: configured for UDMA/133 [ 56.829146] scsi 0:0:0:0: Direct-Access ATA WDC WD3200AAKS-0 12.0 PQ: 0 ANSI: 5 [ 56.829227] scsi 1:0:0:0: Direct-Access ATA External Disk 0 RGL1 PQ: 0 ANSI: 5 [ 56.829305] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5 [ 56.829379] scsi 3:0:0:0: Direct-Access ATA SAMSUNG HD403LJ CT10 PQ: 0 ANSI: 5 [ 56.829516] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 20 (level, low) -> IRQ 19 [ 56.829525] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 56.829528] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 56.829698] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 56.829728] uhci_hcd 0000:00:1d.0: irq 19, io base 0x0000e480 [ 56.829828] usb usb1: configuration #1 chosen from 1 choice [ 56.829844] hub 1-0:1.0: USB hub found [ 56.829847] hub 1-0:1.0: 2 ports detected [ 56.835828] Driver 'sd' needs updating - please use bus_type methods [ 56.835896] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 56.835904] sd 0:0:0:0: [sda] Write Protect is off [ 56.835906] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 56.835917] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.835956] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors (320073 MB) [ 56.835963] sd 0:0:0:0: [sda] Write Protect is off [ 56.835965] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 56.835976] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.835978] sda: sda1 sda2 sda3 sda4 < sda5 > [ 56.865746] sd 0:0:0:0: [sda] Attached SCSI disk [ 56.865783] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 56.865791] sd 1:0:0:0: [sdb] Write Protect is off [ 56.865793] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 56.865804] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.865834] sd 1:0:0:0: [sdb] 976773168 512-byte hardware sectors (500108 MB) [ 56.865841] sd 1:0:0:0: [sdb] Write Protect is off [ 56.865842] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 56.865854] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.865856] sdb: unknown partition table [ 56.866342] sd 1:0:0:0: [sdb] Attached SCSI disk [ 56.866383] sd 2:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB) [ 56.866393] sd 2:0:0:0: [sdc] Write Protect is off [ 56.866395] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 56.866411] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.866447] sd 2:0:0:0: [sdc] 781422768 512-byte hardware sectors (400088 MB) [ 56.866457] sd 2:0:0:0: [sdc] Write Protect is off [ 56.866459] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00 [ 56.866476] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.866479] sdc: sdc1 [ 56.929903] sdc: p1 exceeds device capacity [ 56.929954] sd 2:0:0:0: [sdc] Attached SCSI disk [ 56.929996] sd 3:0:0:0: [sdd] 781422768 512-byte hardware sectors (400088 MB) [ 56.930006] sd 3:0:0:0: [sdd] Write Protect is off [ 56.930008] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 56.930024] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.930060] sd 3:0:0:0: [sdd] 781422768 512-byte hardware sectors (400088 MB) [ 56.930071] sd 3:0:0:0: [sdd] Write Protect is off [ 56.930072] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 56.930083] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 56.930085] sdd:<6>ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 20 [ 56.933483] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 56.933487] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 56.933508] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 56.933540] uhci_hcd 0000:00:1d.1: irq 20, io base 0x0000e800 [ 56.933631] usb usb2: configuration #1 chosen from 1 choice [ 56.933646] hub 2-0:1.0: USB hub found [ 56.933649] hub 2-0:1.0: 2 ports detected [ 57.009329] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 57.009333] ldm_parse_tocblock(): Cannot find TOCBLOCK, database may be corrupt. [ 57.032199] [LDM] sdd1 [ 57.032416] sd 3:0:0:0: [sdd] Attached SCSI disk [ 57.035676] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 57.035693] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 57.035712] sd 2:0:0:0: Attached scsi generic sg2 type 0 [ 57.035723] sd 3:0:0:0: Attached scsi generic sg3 type 0 [ 57.037206] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 21 [ 57.037214] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 57.037217] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 57.037232] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 57.037261] uhci_hcd 0000:00:1d.2: irq 21, io base 0x0000e880 [ 57.037338] usb usb3: configuration #1 chosen from 1 choice [ 57.037354] hub 3-0:1.0: USB hub found [ 57.037357] hub 3-0:1.0: 2 ports detected [ 57.098400] attempt to access beyond end of device [ 57.098403] sdc: rw=0, want=2344251272, limit=781422768 [ 57.098405] Buffer I/O error on device sdc1, logical block 293031152 [ 57.098408] attempt to access beyond end of device [ 57.098410] sdc: rw=0, want=2344251272, limit=781422768 [ 57.098412] Buffer I/O error on device sdc1, logical block 293031152 [ 57.098418] attempt to access beyond end of device [ 57.098419] sdc: rw=0, want=2344251384, limit=781422768 [ 57.098421] Buffer I/O error on device sdc1, logical block 293031166 [ 57.098423] attempt to access beyond end of device [ 57.098424] sdc: rw=0, want=2344251384, limit=781422768 [ 57.098426] Buffer I/O error on device sdc1, logical block 293031166 [ 57.098457] attempt to access beyond end of device [ 57.098458] sdc: rw=0, want=2344251392, limit=781422768 [ 57.098460] Buffer I/O error on device sdc1, logical block 293031167 [ 57.098462] attempt to access beyond end of device [ 57.098463] sdc: rw=0, want=2344251392, limit=781422768 [ 57.098465] Buffer I/O error on device sdc1, logical block 293031167 [ 57.098470] attempt to access beyond end of device [ 57.098471] sdc: rw=0, want=2344251392, limit=781422768 [ 57.098473] Buffer I/O error on device sdc1, logical block 293031167 [ 57.098477] attempt to access beyond end of device [ 57.098479] sdc: rw=0, want=2344251392, limit=781422768 [ 57.098480] Buffer I/O error on device sdc1, logical block 293031167 [ 57.098485] attempt to access beyond end of device [ 57.098486] sdc: rw=0, want=2344251392, limit=781422768 [ 57.098488] Buffer I/O error on device sdc1, logical block 293031167 [ 57.098493] attempt to access beyond end of device [ 57.098494] sdc: rw=0, want=2344251392, limit=781422768 [ 57.098495] Buffer I/O error on device sdc1, logical block 293031167 [ 57.098500] attempt to access beyond end of device [ 57.098501] sdc: rw=0, want=2344251392, limit=781422768 [ 57.098507] attempt to access beyond end of device [ 57.098509] sdc: rw=0, want=2344251336, limit=781422768 [ 57.098513] attempt to access beyond end of device [ 57.098515] sdc: rw=0, want=2344251384, limit=781422768 [ 57.098519] attempt to access beyond end of device [ 57.098521] sdc: rw=0, want=2344251392, limit=781422768 [ 57.098525] attempt to access beyond end of device [ 57.098527] sdc: rw=0, want=2344251392, limit=781422768 [ 57.141016] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 17 [ 57.141027] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 57.141030] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 57.141052] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 57.141096] uhci_hcd 0000:00:1d.3: irq 17, io base 0x0000ec00 [ 57.141182] usb usb4: configuration #1 chosen from 1 choice [ 57.141200] hub 4-0:1.0: USB hub found [ 57.141203] hub 4-0:1.0: 2 ports detected [ 57.172851] usb 1-1: new full speed USB device using uhci_hcd and address 2 [ 57.244816] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 20 (level, low) -> IRQ 19 [ 57.244832] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 57.244836] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 57.244874] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 57.248776] ehci_hcd 0000:00:1d.7: debug port 1 [ 57.248781] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 57.248786] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xfebfbc00 [ 57.300074] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 57.300180] usb usb5: configuration #1 chosen from 1 choice [ 57.300205] hub 5-0:1.0: USB hub found [ 57.300210] hub 5-0:1.0: 8 ports detected [ 57.404926] ata_piix 0000:00:1f.1: version 2.12 [ 57.404948] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 22 (level, low) -> IRQ 22 [ 57.404990] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 57.405040] scsi4 : ata_piix [ 57.405081] scsi5 : ata_piix [ 57.405104] ata5: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14 [ 57.405105] ata6: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15 [ 57.695175] usb 1-1: device not accepting address 2, error -71 [ 57.731407] ata5.01: ATAPI: TSSTcorp CDDVDW SH-S202J, SB01, max UDMA/66 [ 57.902965] ata5.01: configured for UDMA/66 [ 58.069655] scsi 4:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S202J SB01 PQ: 0 ANSI: 5 [ 58.069724] scsi 4:0:1:0: Attached scsi generic sg4 type 5 [ 58.069954] ACPI: PCI Interrupt 0000:01:03.0[A] -> GSI 21 (level, low) -> IRQ 23 [ 58.193769] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[23] MMIO=[f86ff800-f86fffff] Max Packet=[2048] IR/IT contexts=[4/8] [ 58.201523] Driver 'sr' needs updating - please use bus_type methods [ 58.206082] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 58.206086] Uniform CD-ROM driver Revision: 3.20 [ 58.206132] sr 4:0:1:0: Attached scsi CD-ROM sr0 [ 58.248299] device-mapper: uevent: version 1.0.3 [ 58.248320] device-mapper: ioctl: 4.12.0-ioctl (2007-10-02) initialised: [EMAIL PROTECTED] [ 58.345895] device-mapper: table: 254:0: striped: Couldn't parse stripe destination [ 58.345897] device-mapper: ioctl: error adding target to table [ 58.366131] Attempting manual resume [ 58.366133] swsusp: Resume From Partition 8:5 [ 58.366134] PM: Checking swsusp image. [ 58.366256] PM: Resume from disk failed. [ 58.394776] kjournald starting. Commit interval 5 seconds [ 58.394781] EXT3-fs: mounted filesystem with ordered data mode. [ 58.493385] usb 5-1: new high speed USB device using ehci_hcd and address 2 [ 58.625512] usb 5-1: configuration #1 chosen from 1 choice [ 58.625573] hub 5-1:1.0: USB hub found [ 58.625673] hub 5-1:1.0: 7 ports detected [ 58.968305] usb 5-2: new high speed USB device using ehci_hcd and address 3 [ 59.104954] usb 5-2: configuration #1 chosen from 1 choice [ 59.463303] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d800015234c0] [ 59.582915] usb 5-7: new high speed USB device using ehci_hcd and address 5 [ 59.715974] usb 5-7: configuration #1 chosen from 1 choice [ 59.716291] hub 5-7:1.0: USB hub found [ 59.716519] hub 5-7:1.0: 4 ports detected [ 60.017981] usb 5-1.1: new full speed USB device using ehci_hcd and address 6 [ 60.112222] usb 5-1.1: configuration #1 chosen from 1 choice [ 60.112416] hub 5-1.1:1.0: USB hub found [ 60.112646] hub 5-1.1:1.0: 4 ports detected [ 60.413112] usb 5-1.2: new low speed USB device using ehci_hcd and address 7 [ 60.525935] usb 5-1.2: configuration #1 chosen from 1 choice [ 60.724425] usb 5-1.6: new high speed USB device using ehci_hcd and address 8 [ 60.817167] usb 5-1.6: configuration #1 chosen from 1 choice [ 61.055590] usb 2-2: new full speed USB device using uhci_hcd and address 2 [ 61.247147] usb 2-2: configuration #1 chosen from 1 choice [ 61.450948] usb 5-7.3: new high speed USB device using ehci_hcd and address 9 [ 61.549055] usb 5-7.3: configuration #1 chosen from 1 choice [ 61.750164] usb 5-1.1.1: new low speed USB device using ehci_hcd and address 10 [ 61.846634] usb 5-1.1.1: configuration #1 chosen from 1 choice [ 62.045518] usb 5-1.1.4: new full speed USB device using ehci_hcd and address 11 [ 62.140629] usb 5-1.1.4: configuration #1 chosen from 1 choice [ 66.111678] attempt to access beyond end of device [ 66.111681] sdc: rw=0, want=2344251272, limit=781422768 [ 66.111683] printk: 5 messages suppressed. [ 66.111685] Buffer I/O error on device sdc1, logical block 293031152 [ 66.111687] attempt to access beyond end of device [ 66.111689] sdc: rw=0, want=2344251272, limit=781422768 [ 66.111694] attempt to access beyond end of device [ 66.111696] sdc: rw=0, want=2344251384, limit=781422768 [ 66.111698] attempt to access beyond end of device [ 66.111699] sdc: rw=0, want=2344251384, limit=781422768 [ 66.111727] attempt to access beyond end of device [ 66.111729] sdc: rw=0, want=2344251392, limit=781422768 [ 66.111731] attempt to access beyond end of device [ 66.111732] sdc: rw=0, want=2344251392, limit=781422768 [ 66.111736] attempt to access beyond end of device [ 66.111738] sdc: rw=0, want=2344251392, limit=781422768 [ 66.111742] attempt to access beyond end of device [ 66.111743] sdc: rw=0, want=2344251392, limit=781422768 [ 66.111747] attempt to access beyond end of device [ 66.111748] sdc: rw=0, want=2344251392, limit=781422768 [ 66.111752] attempt to access beyond end of device [ 66.111754] sdc: rw=0, want=2344251392, limit=781422768 [ 66.111758] attempt to access beyond end of device [ 66.111760] sdc: rw=0, want=2344251392, limit=781422768 [ 66.111766] attempt to access beyond end of device [ 66.111767] sdc: rw=0, want=2344251336, limit=781422768 [ 66.111771] attempt to access beyond end of device [ 66.111773] sdc: rw=0, want=2344251384, limit=781422768 [ 66.111777] attempt to access beyond end of device [ 66.111778] sdc: rw=0, want=2344251392, limit=781422768 [ 66.111782] attempt to access beyond end of device [ 66.111784] sdc: rw=0, want=2344251392, limit=781422768 [ 66.321068] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 66.322397] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 66.332779] input: PC Speaker as /devices/platform/pcspkr/input/input1 [ 66.483322] EDAC MC: Ver: 2.1.0 Jun 4 2008 [ 66.501375] EDAC i82975x: ECC disabled on both channels. [ 66.527839] input: Power Button (FF) as /devices/virtual/input/input2 [ 66.559167] ACPI: Power Button (FF) [PWRF] [ 66.559229] input: Power Button (CM) as /devices/virtual/input/input3 [ 66.591134] ACPI: Power Button (CM) [PWRB] [ 66.591144] iTCO_vendor_support: vendor-support=0 [ 66.624477] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 66.624529] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2, TCOBASE=0x0860) [ 66.624553] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 66.779852] intel_rng: FWH not detected [ 66.801534] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 66.801544] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 66.801565] sky2 0000:03:00.0: v1.20 addr 0xf89fc000 irq 17 Yukon-EC (0xb6) rev 2 [ 66.801865] sky2 eth0: addr 00:1b:fc:7d:9d:07 [ 66.801881] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 66.801887] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 66.801905] sky2 0000:02:00.0: v1.20 addr 0xf88fc000 irq 16 Yukon-EC (0xb6) rev 2 [ 66.802192] sky2 eth1: addr 00:1b:fc:7d:8a:ab [ 66.917271] Linux agpgart interface v0.102 [ 67.047785] usbcore: registered new interface driver libusual [ 67.089231] usbcore: registered new interface driver hiddev [ 67.091889] input: USB Mouse as /devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.2/5-1.2:1.0/input/input4 [ 67.098218] Initializing USB Mass Storage driver... [ 67.119029] nvidia: module license 'NVIDIA' taints kernel. [ 67.370436] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 67.370445] PCI: Setting latency timer of device 0000:05:00.0 to 64 [ 67.370767] NVRM: loading NVIDIA UNIX x86 Kernel Module 169.12 Thu Feb 14 17:53:07 PST 2008 [ 67.375507] ndiswrapper version 1.52 loaded (smp=yes, preempt=no) [ 67.381876] input,hidraw0: USB HID v1.10 Mouse [USB Mouse] on usb-0000:00:1d.7-1.2 [ 67.384272] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.1/5-1.1.1/5-1.1.1:1.0/input/input5 [ 67.384574] scsi6 : SCSI emulation for USB Mass Storage devices [ 67.384612] usb-storage: device found at 8 [ 67.384614] usb-storage: waiting for device to settle before scanning [ 67.386353] usblp0: USB Bidirectional printer dev 2 if 0 alt 1 proto 2 vid 0x067B pid 0x2305 [ 67.449779] input,hidraw1: USB HID v1.10 Keyboard [Gaming Keyboard] on usb-0000:00:1d.7-1.1.1 [ 67.450400] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 19 (level, low) -> IRQ 17 [ 67.450414] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 67.454136] input: Gaming Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.1/5-1.1.1/5-1.1.1:1.1/input/input6 [ 67.505157] input,hiddev96,hidraw2: USB HID v1.10 Device [Gaming Keyboard] on usb-0000:00:1d.7-1.1.1 [ 67.507166] input: G15 Keyboard G15 Keyboard as /devices/pci0000:00/0000:00:1d.7/usb5/5-1/5-1.1/5-1.1.4/5-1.1.4:1.0/input/input7 [ 67.525060] usb 5-2: reset high speed USB device using ehci_hcd and address 3 [ 67.553465] input,hiddev97,hidraw3: USB HID v1.11 Keypad [G15 Keyboard G15 Keyboard] on usb-0000:00:1d.7-1.1.4 [ 67.553479] usbcore: registered new interface driver usbhid [ 67.553482] /build/buildd/linux-2.6.24/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 67.553583] usbcore: registered new interface driver usb-storage [ 67.553585] USB Mass Storage support registered. [ 67.553661] usbcore: registered new interface driver usblp [ 67.668678] ndiswrapper (load_wrap_driver:112): couldn't load driver netmw245; check system log for messages from 'loadndisdriver' [ 67.669633] usbcore: registered new interface driver ndiswrapper [ 67.840630] phy0: Selected rate control algorithm 'simple' [ 67.897130] phy0: hwaddr 00:15:af:1a:80:d9, rtl8187 V1 + rtl8225z2 [ 67.897144] usbcore: registered new interface driver rtl8187 [ 68.016852] device-mapper: table: 254:0: striped: Couldn't parse stripe destination [ 68.016856] device-mapper: ioctl: error adding target to table [ 68.123740] lp: driver loaded but no devices found [ 68.191785] Adding 3791300k swap on /dev/sda5. Priority:-1 extents:1 across:3791300k [ 69.043856] EXT3 FS on sda3, internal journal [ 71.023228] ip_tables: (C) 2000-2006 Netfilter Core Team [ 71.324574] No dock devices found. [ 72.359559] ppdev: user-space parallel port driver [ 72.370774] usb-storage: device scan complete [ 72.371277] scsi 6:0:0:0: Direct-Access WD 3200BEV External 1.04 PQ: 0 ANSI: 4 [ 72.372502] sd 6:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB) [ 72.373375] sd 6:0:0:0: [sde] Write Protect is off [ 72.373378] sd 6:0:0:0: [sde] Mode Sense: 21 00 00 00 [ 72.373384] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 72.374370] sd 6:0:0:0: [sde] 625142448 512-byte hardware sectors (320073 MB) [ 72.375244] sd 6:0:0:0: [sde] Write Protect is off [ 72.375247] sd 6:0:0:0: [sde] Mode Sense: 21 00 00 00 [ 72.375248] sd 6:0:0:0: [sde] Assuming drive cache: write through [ 72.375253] sde:<5>audit(1213779641.463:2): type=1503 operation="inode_permission" requested_mask="a::" denied_mask="a::" name="/dev/tty" pid=5608 profile="/usr/sbin/cupsd" namespace="default" [ 72.509409] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 72.509414] apm: disabled - APM is not SMP safe. [ 73.883941] Bluetooth: Core ver 2.11 [ 73.884029] NET: Registered protocol family 31 [ 73.884034] Bluetooth: HCI device and connection manager initialized [ 73.884036] Bluetooth: HCI socket layer initialized [ 73.891700] Bluetooth: L2CAP ver 2.9 [ 73.891705] Bluetooth: L2CAP socket layer initialized [ 73.894256] Bluetooth: RFCOMM socket layer initialized [ 73.894264] Bluetooth: RFCOMM TTY layer initialized [ 73.894265] Bluetooth: RFCOMM ver 1.8 [ 75.955492] sde1 [ 75.955572] sd 6:0:0:0: [sde] Attached SCSI disk [ 75.955604] sd 6:0:0:0: Attached scsi generic sg5 type 0 [ 82.193613] sky2 eth1: enabling interface [ 82.205799] sky2 eth0: enabling interface [ 83.273418] NET: Registered protocol family 17 [ 385.366551] NET: Registered protocol family 10 [ 385.366742] lo: Disabled Privacy Extensions [ 385.367028] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 385.367183] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 385.367556] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 394.258358] wlan0: Initial auth_alg=0 [ 394.258364] wlan0: authenticate with AP 00:1c:df:4a:e3:7d [ 394.259965] wlan0: RX authentication from 00:1c:df:4a:e3:7d (alg=0 transaction=2 status=0) [ 394.259968] wlan0: authenticated [ 394.259970] wlan0: associate with AP 00:1c:df:4a:e3:7d [ 394.262446] wlan0: RX AssocResp from 00:1c:df:4a:e3:7d (capab=0x401 status=0 aid=1) [ 394.262450] wlan0: associated [ 394.263792] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready ================================== And, thanks for trying to help me out! BR Jorgen Jonsson -- dmraid doesn't work with gigabyte k8nf-9 nforce4x chipset https://bugs.launchpad.net/bugs/138130 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
