Here are some details I forgot to mention:
Steps to reproduce:
1. Login user A
2. Login user B
3. Switch to user A
4. After staying for a few seconds on A's desktop, the login screen
unexpectedly re-appears. Further attempts to login as A cause the same
problem. (This only happens occationally, usually after computer has been
running for a long time with B logged in; B's continually running Firefox
session leaks a lot of memory. Also, login screen may repaint / flash black
several times)
5. The dialog:
"Cannot start new display
The allowed limit of flexible X servers reached"
Has been observed on B after an occurance of the bug
Only rebooting / restarting X fixes the problem
Expected: I should be able to login on A after logging onto B all the
time
Possible serious consequences: Data loss for A due to failure to be able
to return to session
I must stress that it appears the bug only occurs for certain users. I
understand this doesn't make it very easy to track down.
By the way, I am experiencing bug #195311 as well, usually around the
same time I experience this bug. The two problems may be related.
======================================
System details are as follows: (let me know if you need anything else)
Ubuntu 7.10 Gusty
$uname-a
Linux Gandalf 2.6.22-14-generic #1 SMP Tue Feb 12 07:42:25 UTC 2008 i686
GNU/Linux
$lspci
00:00.0 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a1)
00:01.0 ISA bridge: nVidia Corporation MCP55 LPC Bridge (rev a2)
00:01.1 SMBus: nVidia Corporation MCP55 SMBus (rev a2)
00:01.2 RAM memory: nVidia Corporation MCP55 Memory Controller (rev a2)
00:02.0 USB Controller: nVidia Corporation MCP55 USB Controller (rev a1)
00:02.1 USB Controller: nVidia Corporation MCP55 USB Controller (rev a2)
00:04.0 IDE interface: nVidia Corporation MCP55 IDE (rev a1)
00:05.0 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.1 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:05.2 IDE interface: nVidia Corporation MCP55 SATA Controller (rev a2)
00:06.0 PCI bridge: nVidia Corporation MCP55 PCI bridge (rev a2)
00:06.1 Audio device: nVidia Corporation MCP55 High Definition Audio (rev a2)
00:08.0 Bridge: nVidia Corporation MCP55 Ethernet (rev a2)
00:0a.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0b.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0c.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0d.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0e.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:0f.0 PCI bridge: nVidia Corporation MCP55 PCI Express bridge (rev a2)
00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
HyperTransport Technology Configuration
00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address
Map
00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM
Controller
00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron]
Miscellaneous Control
01:07.0 Multimedia audio controller: Creative Labs SB Audigy (rev 04)
01:07.1 Input device controller: Creative Labs SB Audigy Game Port (rev 04)
01:07.2 FireWire (IEEE 1394): Creative Labs SB Audigy FireWire Port (rev 04)
07:00.0 VGA compatible controller: nVidia Corporation G70 [GeForce 7600 GT]
(rev a1)
$lsmod
Module Size Used by
binfmt_misc 12936 1
rfcomm 42136 2
l2cap 26240 11 rfcomm
bluetooth 57060 4 rfcomm,l2cap
nfsd 220912 13
exportfs 7040 1 nfsd
lockd 67592 2 nfsd
sunrpc 172412 8 nfsd,lockd
ppdev 10244 0
cpufreq_stats 7232 0
cpufreq_powersave 2688 0
cpufreq_conservative 8072 0
cpufreq_userspace 5280 0
cpufreq_ondemand 9612 0
freq_table 5792 2 cpufreq_stats,cpufreq_ondemand
video 18060 0
ac 6148 0
dock 10656 0
container 5504 0
sbs 19592 0
button 8976 0
battery 11012 0
sbp2 24072 0
lp 12580 0
snd_hda_intel 263840 0
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_emu10k1_synth 8192 0
snd_emux_synth 35456 1 snd_emu10k1_synth
snd_seq_virmidi 8064 1 snd_emux_synth
snd_seq_midi_emul 7680 1 snd_emux_synth
snd_seq_midi 9600 0
agpgart 35016 0
snd_emu10k1 137248 2 snd_emu10k1_synth
snd_ac97_codec 100644 1 snd_emu10k1
snd_rawmidi 25728 3 snd_seq_virmidi,snd_seq_midi,snd_emu10k1
snd_seq_midi_event 8448 3 snd_seq_oss,snd_seq_virmidi,snd_seq_midi
snd_seq 53232 9
snd_seq_dummy,snd_seq_oss,snd_emux_synth,snd_seq_virmidi,snd_seq_midi_emul,snd_seq_midi,snd_seq_midi_event
ac97_bus 3200 1 snd_ac97_codec
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
serio_raw 8068 0
pcspkr 4224 0
snd_pcm 80388 4
snd_hda_intel,snd_emu10k1,snd_ac97_codec,snd_pcm_oss
snd_seq_device 9228 8
snd_seq_dummy,snd_seq_oss,snd_emu10k1_synth,snd_emux_synth,snd_seq_midi,snd_emu10k1,snd_rawmidi,snd_seq
snd_timer 24324 3 snd_emu10k1,snd_seq,snd_pcm
snd_util_mem 5760 2 snd_emux_synth,snd_emu10k1
snd_hwdep 10244 2 snd_emux_synth,snd_emu10k1
parport_pc 37412 1
parport 37448 3 ppdev,lp,parport_pc
k8temp 6656 0
snd 54660 16
snd_hda_intel,snd_seq_oss,snd_emux_synth,snd_seq_virmidi,snd_emu10k1,snd_ac97_codec,snd_rawmidi,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_device,snd_timer,snd_hwdep
usblp 15104 0
emu10k1_gp 4736 0
gameport 16776 2 emu10k1_gp
psmouse 39952 0
shpchp 34580 0
pci_hotplug 32704 1 shpchp
snd_page_alloc 11400 3 snd_hda_intel,snd_emu10k1,snd_pcm
soundcore 8800 1 snd
ide_cd 32672 0
cdrom 37536 1 ide_cd
i2c_nforce2 7040 0
i2c_core 26112 1 i2c_nforce2
ipv6 273892 20
evdev 11136 3
ext3 133896 1
jbd 60456 1 ext3
mbcache 9732 1 ext3
sg 36764 0
sd_mod 30336 3
usb_storage 73024 0
libusual 18448 1 usb_storage
sata_nv 20612 2
ohci1394 36528 0
ieee1394 96312 2 sbp2,ohci1394
forcedeth 51592 0
amd74xx 15260 0 [permanent]
ide_core 116804 3 ide_cd,usb_storage,amd74xx
ata_generic 8452 0
libata 125168 2 sata_nv,ata_generic
scsi_mod 147084 5 sbp2,sg,sd_mod,usb_storage,libata
ehci_hcd 36492 0
ohci_hcd 22916 0
usbcore 138632 6 usblp,usb_storage,libusual,ehci_hcd,ohci_hcd
thermal 14344 0
processor 32072 1 thermal
fan 5764 0
fuse 47124 1
apparmor 40728 0
commoncap 8320 1 apparmor
$dmesg
[ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Tue Feb 12
07:42:25 UTC 2008 (Ubuntu 2.6.22-14.52-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fef0000 (usable)
[ 0.000000] BIOS-e820: 000000003fef0000 - 000000003fef3000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003fef3000 - 000000003ff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
[ 0.000000] 126MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f5c20
[ 0.000000] Entering add_active_range(0, 0, 261872) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 261872
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 261872
[ 0.000000] On node 0 totalpages: 261872
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 253 pages used for memmap
[ 0.000000] HighMem zone: 32243 pages, LIFO batch:7
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP signature @ 0xC00F7890 checksum 0
[ 0.000000] ACPI: RSDP 000F7890, 0014 (r0 Nvidia)
[ 0.000000] ACPI: RSDT 3FEF3040, 0030 (r1 Nvidia AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: FACP 3FEF30C0, 0074 (r1 Nvidia AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: DSDT 3FEF3180, 9B41 (r1 NVIDIA AWRDACPI 1000 MSFT
100000E)
[ 0.000000] ACPI: FACS 3FEF0000, 0040
[ 0.000000] ACPI: MCFG 3FEFCE00, 003C (r1 Nvidia AWRDACPI 42302E31 AWRD
0)
[ 0.000000] ACPI: APIC 3FEFCD40, 0072 (r1 Nvidia AWRDACPI 42302E31 AWRD
0)
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:15 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 40000000 (gap:
3ff00000:b0100000)
[ 0.000000] Built 1 zonelists. Total pages: 259827
[ 0.000000] Kernel command line:
root=UUID=8ab30828-09cc-449c-ac91-2c409642ff02 ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 2210.270 MHz processor.
[ 18.403735] spurious 8259A interrupt: IRQ7.
[ 18.404837] Console: colour VGA+ 80x25
[ 18.405131] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 18.405482] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 18.424465] Memory: 1026872k/1047488k available (2015k kernel code, 19916k
reserved, 915k data, 364k init, 129984k highmem)
[ 18.424474] virtual kernel memory layout:
[ 18.424475] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 18.424476] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 18.424477] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 18.424479] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 18.424480] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 18.424481] .data : 0xc02f7e86 - 0xc03dce84 ( 915 kB)
[ 18.424482] .text : 0xc0100000 - 0xc02f7e86 (2015 kB)
[ 18.424484] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 18.424515] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1,
Nodes=1
[ 18.504484] Calibrating delay using timer specific routine.. 4424.06
BogoMIPS (lpj=8848137)
[ 18.504506] Security Framework v1.0.0 initialized
[ 18.504511] SELinux: Disabled at boot.
[ 18.504522] Mount-cache hash table entries: 512
[ 18.504622] CPU: After generic identify, caps: 078bfbff ebd3fbff 00000000
00000000 00002001 00000000 0000001d
[ 18.504629] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 18.504631] CPU: L2 Cache: 512K (64 bytes/line)
[ 18.504634] CPU: After all inits, caps: 078bfbff ebd3fbff 00000000 00000410
00002001 00000000 0000001d
[ 18.504642] Compat vDSO mapped to ffffe000.
[ 18.504652] Checking 'hlt' instruction... OK.
[ 18.520591] SMP alternatives: switching to UP code
[ 18.520754] Freeing SMP alternatives: 11k freed
[ 18.520981] Early unpacking initramfs... done
[ 18.780643] ACPI: Core revision 20070126
[ 18.780728] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 18.785484] CPU0: AMD Athlon(tm) 64 Processor 3500+ stepping 02
[ 18.785498] Total of 1 processors activated (4424.06 BogoMIPS).
[ 18.785729] ENABLING IO-APIC IRQs
[ 18.785939] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 18.932268] Brought up 1 CPUs
[ 18.932370] Booting paravirtualized kernel on bare hardware
[ 18.932414] Time: 2:05:29 Date: 05/12/108
[ 18.932431] NET: Registered protocol family 16
[ 18.932493] EISA bus registered
[ 18.932502] ACPI: bus type pci registered
[ 18.936930] PCI: PCI BIOS revision 3.00 entry at 0xf1e40, last bus=7
[ 18.936932] PCI: Using configuration type 1
[ 18.936933] Setting up standard PCI resources
[ 18.941813] ACPI: EC: Look up EC in DSDT
[ 18.950974] ACPI: Interpreter enabled
[ 18.950977] ACPI: (supports S0 S1 S3 S4 S5)
[ 18.950988] ACPI: Using IOAPIC for interrupt routing
[ 18.961785] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 18.961793] PCI: Probing PCI hardware (bus 00)
[ 18.962344] PCI: Transparent bridge - 0000:00:06.0
[ 18.962669] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 18.963003] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT]
[ 19.059467] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 19.059689] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 9 *10 11 14 15)
[ 19.059911] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 9 *10 11 14 15)
[ 19.060129] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 19.060352] ACPI: PCI Interrupt Link [LNK5] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 19.060572] ACPI: PCI Interrupt Link [LNK6] (IRQs 5 7 9 10 *11 14 15)
[ 19.060789] ACPI: PCI Interrupt Link [LNK7] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 19.061008] ACPI: PCI Interrupt Link [LNK8] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 19.061226] ACPI: PCI Interrupt Link [LP2P] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 19.061445] ACPI: PCI Interrupt Link [LUBA] (IRQs 5 7 9 10 *11 14 15)
[ 19.061664] ACPI: PCI Interrupt Link [LMAC] (IRQs 5 7 9 *10 11 14 15)
[ 19.061883] ACPI: PCI Interrupt Link [LAZA] (IRQs *5 7 9 10 11 14 15)
[ 19.062102] ACPI: PCI Interrupt Link [LPMU] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 19.062321] ACPI: PCI Interrupt Link [LSMB] (IRQs 5 7 9 *10 11 14 15)
[ 19.062540] ACPI: PCI Interrupt Link [LUB2] (IRQs *5 7 9 10 11 14 15)
[ 19.062759] ACPI: PCI Interrupt Link [LIDE] (IRQs 5 7 9 10 11 14 15) *0,
disabled.
[ 19.062978] ACPI: PCI Interrupt Link [LSID] (IRQs 5 7 9 *10 11 14 15)
[ 19.063203] ACPI: PCI Interrupt Link [LFID] (IRQs 5 7 9 10 *11 14 15)
[ 19.063426] ACPI: PCI Interrupt Link [LSA2] (IRQs *5 7 9 10 11 14 15)
[ 19.063676] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0, disabled.
[ 19.063915] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[ 19.064152] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0
[ 19.064392] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0, disabled.
[ 19.064630] ACPI: PCI Interrupt Link [APC5] (IRQs 16) *0, disabled.
[ 19.064867] ACPI: PCI Interrupt Link [APC6] (IRQs 16) *0
[ 19.065105] ACPI: PCI Interrupt Link [APC7] (IRQs 16) *0, disabled.
[ 19.065343] ACPI: PCI Interrupt Link [APC8] (IRQs 16) *0, disabled.
[ 19.065581] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[ 19.065822] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[ 19.066060] ACPI: PCI Interrupt Link [APMU] (IRQs 20 21 22 23) *0, disabled.
[ 19.066299] ACPI: PCI Interrupt Link [AAZA] (IRQs 20 21 22 23) *0
[ 19.066538] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[ 19.066777] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[ 19.067016] ACPI: PCI Interrupt Link [APCM] (IRQs 20 21 22 23) *0, disabled.
[ 19.067255] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[ 19.067494] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[ 19.067733] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[ 19.067971] ACPI: PCI Interrupt Link [ASA2] (IRQs 20 21 22 23) *0
[ 19.068074] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 19.068086] pnp: PnP ACPI init
[ 19.068092] ACPI: bus type pnp registered
[ 19.073709] pnp: PnP ACPI: found 13 devices
[ 19.073711] ACPI: ACPI bus type pnp unregistered
[ 19.073714] PnPBIOS: Disabled by ACPI PNP
[ 19.073751] PCI: Using ACPI for IRQ routing
[ 19.073755] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 19.172200] NET: Registered protocol family 8
[ 19.172202] NET: Registered protocol family 20
[ 19.172243] pnp: 00:01: ioport range 0x1000-0x107f has been reserved
[ 19.172245] pnp: 00:01: ioport range 0x1080-0x10ff has been reserved
[ 19.172248] pnp: 00:01: ioport range 0x1400-0x147f has been reserved
[ 19.172250] pnp: 00:01: ioport range 0x1480-0x14ff has been reserved
[ 19.172252] pnp: 00:01: ioport range 0x1800-0x187f has been reserved
[ 19.172255] pnp: 00:01: ioport range 0x1880-0x18ff has been reserved
[ 19.172262] pnp: 00:0b: iomem range 0x0-0x0 could not be reserved
[ 19.172266] pnp: 00:0c: iomem range 0xd0000-0xd3fff has been reserved
[ 19.172268] pnp: 00:0c: iomem range 0xf0000-0xf7fff could not be reserved
[ 19.172271] pnp: 00:0c: iomem range 0xf8000-0xfbfff could not be reserved
[ 19.172273] pnp: 00:0c: iomem range 0xfc000-0xfffff could not be reserved
[ 19.176091] Time: tsc clocksource has been installed.
[ 19.202456] PCI: Bridge: 0000:00:06.0
[ 19.202458] IO window: a000-afff
[ 19.202461] MEM window: fde00000-fdefffff
[ 19.202463] PREFETCH window: disabled.
[ 19.202465] PCI: Bridge: 0000:00:0a.0
[ 19.202466] IO window: disabled.
[ 19.202468] MEM window: disabled.
[ 19.202470] PREFETCH window: disabled.
[ 19.202472] PCI: Bridge: 0000:00:0b.0
[ 19.202473] IO window: disabled.
[ 19.202475] MEM window: disabled.
[ 19.202476] PREFETCH window: disabled.
[ 19.202479] PCI: Bridge: 0000:00:0c.0
[ 19.202480] IO window: disabled.
[ 19.202482] MEM window: disabled.
[ 19.202483] PREFETCH window: disabled.
[ 19.202485] PCI: Bridge: 0000:00:0d.0
[ 19.202487] IO window: disabled.
[ 19.202488] MEM window: disabled.
[ 19.202490] PREFETCH window: disabled.
[ 19.202492] PCI: Bridge: 0000:00:0e.0
[ 19.202493] IO window: disabled.
[ 19.202495] MEM window: disabled.
[ 19.202497] PREFETCH window: disabled.
[ 19.202499] PCI: Bridge: 0000:00:0f.0
[ 19.202501] IO window: 9000-9fff
[ 19.202503] MEM window: fa000000-fcffffff
[ 19.202505] PREFETCH window: e0000000-efffffff
[ 19.202513] PCI: Setting latency timer of device 0000:00:06.0 to 64
[ 19.202519] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 19.202525] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 19.202530] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 19.202535] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 19.202540] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 19.202546] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 19.202555] NET: Registered protocol family 2
[ 19.240081] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 19.240171] TCP established hash table entries: 131072 (order: 8, 1572864
bytes)
[ 19.241287] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 19.241677] TCP: Hash tables configured (established 131072 bind 65536)
[ 19.241679] TCP reno registered
[ 19.252147] checking if image is initramfs... it is
[ 19.703783] Switched to high resolution mode on CPU 0
[ 19.761021] Freeing initrd memory: 7048k freed
[ 19.761299] audit: initializing netlink socket (disabled)
[ 19.761309] audit(1213236329.152:1): initialized
[ 19.761358] highmem bounce pool size: 64 pages
[ 19.762598] VFS: Disk quotas dquot_6.5.1
[ 19.762632] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 19.762697] io scheduler noop registered
[ 19.762699] io scheduler anticipatory registered
[ 19.762700] io scheduler deadline registered
[ 19.762711] io scheduler cfq registered (default)
[ 19.775692] Boot video device is 0000:07:00.0
[ 19.775758] PCI: Setting latency timer of device 0000:00:0a.0 to 64
[ 19.775776] assign_interrupt_mode Found MSI capability
[ 19.775778] Allocate Port Service[0000:00:0a.0:pcie00]
[ 19.775821] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 19.775838] assign_interrupt_mode Found MSI capability
[ 19.775840] Allocate Port Service[0000:00:0b.0:pcie00]
[ 19.775881] PCI: Setting latency timer of device 0000:00:0c.0 to 64
[ 19.775898] assign_interrupt_mode Found MSI capability
[ 19.775899] Allocate Port Service[0000:00:0c.0:pcie00]
[ 19.775941] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 19.775958] assign_interrupt_mode Found MSI capability
[ 19.775959] Allocate Port Service[0000:00:0d.0:pcie00]
[ 19.775999] PCI: Setting latency timer of device 0000:00:0e.0 to 64
[ 19.776016] assign_interrupt_mode Found MSI capability
[ 19.776018] Allocate Port Service[0000:00:0e.0:pcie00]
[ 19.776060] PCI: Setting latency timer of device 0000:00:0f.0 to 64
[ 19.776077] assign_interrupt_mode Found MSI capability
[ 19.776079] Allocate Port Service[0000:00:0f.0:pcie00]
[ 19.776161] isapnp: Scanning for PnP cards...
[ 20.128614] isapnp: No Plug & Play device found
[ 20.145126] Real Time Clock Driver v1.12ac
[ 20.145203] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 20.145287] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.145736] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.146198] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 20.146350] input: Macintosh mouse button emulation as /class/input/input0
[ 20.146401] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 20.146712] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 20.146716] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 20.146823] mice: PS/2 mouse device common for all mice
[ 20.146897] EISA: Probing bus 0 at eisa.0
[ 20.146903] Cannot allocate resource for EISA slot 1
[ 20.146918] EISA: Detected 0 cards.
[ 20.147039] TCP cubic registered
[ 20.147053] NET: Registered protocol family 1
[ 20.147069] Using IPI No-Shortcut mode
[ 20.147222] Magic number: 12:621:55
[ 20.147580] Freeing unused kernel memory: 364k freed
[ 20.220972] input: AT Translated Set 2 keyboard as /class/input/input1
[ 21.330120] AppArmor: AppArmor initialized<5>audit(1213236330.652:2):
type=1505 info="AppArmor initialized" pid=1269
[ 21.337225] fuse init (API version 7.8)
[ 21.342088] Failure registering capabilities with primary security module.
[ 21.349853] ACPI: Fan [FAN] (on)
[ 21.353677] ACPI Exception (processor_core-0783): AE_NOT_FOUND, Processor
Device is not present [20070126]
[ 21.354966] ACPI: Thermal Zone [THRM] (40 C)
[ 21.883449] usbcore: registered new interface driver usbfs
[ 21.883471] usbcore: registered new interface driver hub
[ 21.883487] usbcore: registered new device driver usb
[ 21.883996] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI)
Driver
[ 21.884417] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 23
[ 21.884426] ACPI: PCI Interrupt 0000:00:02.0[A] -> Link [APCF] -> GSI 23
(level, low) -> IRQ 16
[ 21.884436] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 21.884439] ohci_hcd 0000:00:02.0: OHCI Host Controller
[ 21.884571] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus
number 1
[ 21.884588] ohci_hcd 0000:00:02.0: irq 16, io mem 0xfe02f000
[ 21.913709] SCSI subsystem initialized
[ 21.917298] libata version 2.21 loaded.
[ 21.930704] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 21.930708] ide: Assuming 33MHz system bus speed for PIO modes; override
with idebus=xx
[ 21.951592] forcedeth.c: Reverse Engineered nForce ethernet driver. Version
0.60.
[ 21.968286] usb usb1: configuration #1 chosen from 1 choice
[ 21.968308] hub 1-0:1.0: USB hub found
[ 21.968317] hub 1-0:1.0: 10 ports detected
[ 22.070697] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 22
[ 22.070707] ACPI: PCI Interrupt 0000:00:02.1[B] -> Link [APCL] -> GSI 22
(level, low) -> IRQ 17
[ 22.070717] PCI: Setting latency timer of device 0000:00:02.1 to 64
[ 22.070719] ehci_hcd 0000:00:02.1: EHCI Host Controller
[ 22.070739] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus
number 2
[ 22.070760] ehci_hcd 0000:00:02.1: debug port 1
[ 22.070763] PCI: cache line size of 64 is not supported by device
0000:00:02.1
[ 22.070773] ehci_hcd 0000:00:02.1: irq 17, io mem 0xfe02e000
[ 22.070778] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 22.070836] usb usb2: configuration #1 chosen from 1 choice
[ 22.070855] hub 2-0:1.0: USB hub found
[ 22.070861] hub 2-0:1.0: 10 ports detected
[ 22.176297] sata_nv 0000:00:05.0: version 3.4
[ 22.176704] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 21
[ 22.176713] ACPI: PCI Interrupt 0000:00:05.0[A] -> Link [APSI] -> GSI 21
(level, low) -> IRQ 18
[ 22.176746] PCI: Setting latency timer of device 0000:00:05.0 to 64
[ 22.176794] scsi0 : sata_nv
[ 22.180933] scsi1 : sata_nv
[ 22.181024] ata1: SATA max UDMA/133 cmd 0x000109f0 ctl 0x00010bf2 bmdma
0x0001e000 irq 18
[ 22.181027] ata2: SATA max UDMA/133 cmd 0x00010970 ctl 0x00010b72 bmdma
0x0001e008 irq 18
[ 22.469822] usb 2-8: new high speed USB device using ehci_hcd and address 2
[ 22.602745] usb 2-8: configuration #1 chosen from 1 choice
[ 22.628005] usbcore: registered new interface driver libusual
[ 22.631687] Initializing USB Mass Storage driver...
[ 22.631740] scsi2 : SCSI emulation for USB Mass Storage devices
[ 22.631781] usbcore: registered new interface driver usb-storage
[ 22.631783] USB Mass Storage support registered.
[ 22.631858] usb-storage: device found at 2
[ 22.631860] usb-storage: waiting for device to settle before scanning
[ 22.645711] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 22.653879] ata1.00: ATA-7: SAMSUNG HD300LJ, ZT100-12, max UDMA7
[ 22.653882] ata1.00: 586072368 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 22.669860] ata1.00: configured for UDMA/133
[ 22.981470] ata2: SATA link down (SStatus 0 SControl 300)
[ 22.991739] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD300LJ ZT10
PQ: 0 ANSI: 5
[ 22.992183] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 20
[ 22.992192] ACPI: PCI Interrupt 0000:00:05.1[B] -> Link [APSJ] -> GSI 20
(level, low) -> IRQ 19
[ 22.992224] PCI: Setting latency timer of device 0000:00:05.1 to 64
[ 22.992255] scsi3 : sata_nv
[ 22.992283] scsi4 : sata_nv
[ 22.992328] ata3: SATA max UDMA/133 cmd 0x000109e0 ctl 0x00010be2 bmdma
0x0001cc00 irq 19
[ 22.992331] ata4: SATA max UDMA/133 cmd 0x00010960 ctl 0x00010b62 bmdma
0x0001cc08 irq 19
[ 23.301250] ata3: SATA link down (SStatus 0 SControl 300)
[ 23.621030] ata4: SATA link down (SStatus 0 SControl 300)
[ 23.631617] ACPI: PCI Interrupt Link [ASA2] enabled at IRQ 23
[ 23.631621] ACPI: PCI Interrupt 0000:00:05.2[C] -> Link [ASA2] -> GSI 23
(level, low) -> IRQ 16
[ 23.631652] PCI: Setting latency timer of device 0000:00:05.2 to 64
[ 23.631678] scsi5 : sata_nv
[ 23.631870] scsi6 : sata_nv
[ 23.632008] ata5: SATA max UDMA/133 cmd 0x0001c800 ctl 0x0001c402 bmdma
0x0001b800 irq 16
[ 23.632011] ata6: SATA max UDMA/133 cmd 0x0001c000 ctl 0x0001bc02 bmdma
0x0001b808 irq 16
[ 23.940811] ata5: SATA link down (SStatus 0 SControl 300)
[ 24.260591] ata6: SATA link down (SStatus 0 SControl 300)
[ 24.270877] NFORCE-MCP55: IDE controller at PCI slot 0000:00:04.0
[ 24.270891] NFORCE-MCP55: chipset revision 161
[ 24.270893] NFORCE-MCP55: not 100% native mode: will probe irqs later
[ 24.270898] NFORCE-MCP55: 0000:00:04.0 (rev a1) UDMA133 controller
[ 24.270904] ide0: BM-DMA at 0xf400-0xf407, BIOS settings: hda:DMA,
hdb:DMA
[ 24.270913] Probing IDE interface ide0...
[ 24.288088] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
[ 24.288099] sd 0:0:0:0: [sda] Write Protect is off
[ 24.288101] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.288111] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 24.288159] sd 0:0:0:0: [sda] 586072368 512-byte hardware sectors (300069 MB)
[ 24.288165] sd 0:0:0:0: [sda] Write Protect is off
[ 24.288167] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 24.288175] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 24.288179] sda: sda1 sda2
[ 24.328055] sd 0:0:0:0: [sda] Attached SCSI disk
[ 24.331274] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 24.472765] Attempting manual resume
[ 24.472768] swsusp: Resume From Partition 8:2
[ 24.472769] PM: Checking swsusp image.
[ 24.472954] PM: Resume from disk failed.
[ 24.506279] kjournald starting. Commit interval 5 seconds
[ 24.506288] EXT3-fs: mounted filesystem with ordered data mode.
[ 25.004154] hda: _NEC DVD_RW ND-3550A, ATAPI CD/DVD-ROM drive
[ 25.675995] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[ 25.677671] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 22
[ 25.677675] ACPI: PCI Interrupt 0000:00:08.0[A] -> Link [APCH] -> GSI 22
(level, low) -> IRQ 17
[ 25.677680] PCI: Setting latency timer of device 0000:00:08.0 to 64
[ 25.677686] forcedeth: using HIGHDMA
[ 26.195568] eth0: forcedeth.c: subsystem: 010de:cb84 bound to 0000:00:08.0
[ 26.196153] ACPI: PCI Interrupt Link [APC3] enabled at IRQ 18
[ 26.196162] ACPI: PCI Interrupt 0000:01:07.2[B] -> Link [APC3] -> GSI 18
(level, low) -> IRQ 20
[ 26.245931] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[20]
MMIO=[fdeff000-fdeff7ff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 27.514431] ieee1394: Host added: ID:BUS[0-00:1023] GUID[00023c0151142123]
[ 27.626477] usb-storage: device scan complete
[ 27.627849] scsi 2:0:0:0: Direct-Access EPSON Stylus Storage 1.00
PQ: 0 ANSI: 2
[ 27.629734] sd 2:0:0:0: [sdb] Attached SCSI removable disk
[ 27.629758] sd 2:0:0:0: Attached scsi generic sg1 type 0
[ 31.000768] NET: Registered protocol family 10
[ 31.000851] lo: Disabled Privacy Extensions
[ 31.548705] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x1c00
[ 31.548728] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x1c40
[ 32.178982] hda: ATAPI 48X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache,
UDMA(33)
[ 32.178990] Uniform CD-ROM driver Revision: 3.20
[ 32.412485] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 32.413865] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 32.663955] gameport: EMU10K1 is pci0000:01:07.1/gameport0, io 0xa800, speed
59659kHz
[ 32.688517]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB
Bidirectional printer dev 2 if 1 alt 0 proto 2 vid 0x04B8 pid 0x0811
[ 32.688532] usbcore: registered new interface driver usblp
[ 32.688535]
/build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB
Printer Device Class driver
[ 32.799366] logips2pp: Detected unknown logitech mouse model 127
[ 32.946045] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[ 32.946056] ACPI: PCI Interrupt 0000:01:07.0[A] -> Link [APC2] -> GSI 17
(level, low) -> IRQ 21
[ 32.948315] Installing spdif_bug patch: Audigy 2 ZS [SB0350]
[ 32.992522] Linux agpgart interface v0.102 (c) Dave Jones
[ 33.155025] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 21
[ 33.155030] ACPI: PCI Interrupt 0000:00:06.1[B] -> Link [AAZA] -> GSI 21
(level, low) -> IRQ 18
[ 33.155044] PCI: Setting latency timer of device 0000:00:06.1 to 64
[ 33.259961] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input2
[ 33.262534] parport_pc 00:08: reported by Plug and Play ACPI
[ 33.262557] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 33.263789] input: PC Speaker as /class/input/input3
[ 34.007543] lp0: using parport0 (interrupt-driven).
[ 34.129486] Adding 2931852k swap on /dev/sda2. Priority:-1 extents:1
across:2931852k
[ 34.450418] EXT3 FS on sda1, internal journal
[ 36.691024] input: Power Button (FF) as /class/input/input4
[ 36.694753] ACPI: Power Button (FF) [PWRF]
[ 36.724894] input: Power Button (CM) as /class/input/input5
[ 36.728596] ACPI: Power Button (CM) [PWRB]
[ 36.805668] No dock devices found.
[ 37.021902] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 3500+
processors (version 2.00.00)
[ 37.025990] powernow-k8: BIOS error - no PSB or ACPI _PSS objects
[ 38.442358] Failure registering capabilities with primary security module.
[ 39.382472] ppdev: user-space parallel port driver
[ 39.923221] audit(1213236349.796:3): type=1503 operation="inode_permission"
requested_mask="a" denied_mask="a" name="/dev/tty" pid=5201
profile="/usr/sbin/cupsd"
[ 41.901707] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
[ 41.901712] apm: overridden by ACPI.
[ 41.976425] eth0: no IPv6 routers present
[ 42.600957] Installing knfsd (copyright (C) 1996 [EMAIL PROTECTED]).
[ 42.658764] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery
directory
[ 42.669393] NFSD: starting 90-second grace period
[ 43.495225] Bluetooth: Core ver 2.11
[ 43.495350] NET: Registered protocol family 31
[ 43.495352] Bluetooth: HCI device and connection manager initialized
[ 43.495356] Bluetooth: HCI socket layer initialized
[ 43.509361] Bluetooth: L2CAP ver 2.8
[ 43.509364] Bluetooth: L2CAP socket layer initialized
[ 43.582729] Bluetooth: RFCOMM socket layer initialized
[ 43.582846] Bluetooth: RFCOMM TTY layer initialized
[ 43.582848] Bluetooth: RFCOMM ver 1.8
$cat .xsession-errors
(process:5895): Gtk-WARNING **: This process is currently running setuid or
setgid.
This is not a supported use of GTK+. You must create a helper
program instead. For further details, see:
http://www.gtk.org/setuid.html
Refusing to initialize GTK+.
(process:5899): Gtk-WARNING **: This process is currently running setuid or
setgid.
This is not a supported use of GTK+. You must create a helper
program instead. For further details, see:
http://www.gtk.org/setuid.html
Refusing to initialize GTK+.
/etc/gdm/Xsession: Beginning session setup...
SESSION_MANAGER=local/Gandalf:/tmp/.ICE-unix/5892
Window manager warning: Failed to read saved session file
/home/caleb/.metacity/sessions/default0.ms: Failed to open file
'/home/caleb/.metacity/sessions/default0.ms': No such file or directory
Initializing gnome-mount extension
Tracker version 0.6.3 Copyright (c) 2005-2007 by Jamie McCracken ([EMAIL
PROTECTED])
This program is free software and comes without any warranty.
It is licensed under version 2 or later of the General Public License which can
be viewed at http://www.gnu.org/licenses/gpl.txt
Initialising tracker...
Could not set idle IO priority...attempting best effort 7 priority
Throttle level is 0
** Message: Starting remote desktop server
evolution-alarm-notify-Message: Setting timeout for 78823 1213315200 1213236377
evolution-alarm-notify-Message: Thu Jun 12 20:00:00 2008
evolution-alarm-notify-Message: Wed Jun 11 22:06:17 2008
alarm-notify.c:368 (alarm_notify_new) - Alarm Notify New
alarm-notify.c:304 (alarm_channel_setup) - Channel Setup
alarm-notify.c:243 (alarm_notify_init) - Initing Alarm Notify
alarm-queue.c:1870 (alarm_queue_init)
alarm-queue.c:200 (queue_midnight_refresh) - Refresh at Thu Jun 12 20:00:00 2008
alarm-notify.c:220 (load_calendars) - Loading Calendar
file:///home/caleb/.evolution/calendar/local/system
alarm-notify.c:462 (alarm_notify_add_calendar)
file:///home/caleb/.evolution/calendar/local/system - Calendar Open Async...
0x80c0230
alarm-notify.c:220 (load_calendars) - Loading Calendar contacts:///
alarm-notify.c:462 (alarm_notify_add_calendar) contacts:/// - Calendar Open
Async... 0x80d8f60
alarm-notify.c:220 (load_calendars) - Loading Calendar
file:///home/caleb/.evolution/tasks/local/system
alarm-notify.c:462 (alarm_notify_add_calendar)
file:///home/caleb/.evolution/tasks/local/system - Calendar Open Async...
0x80d9150
alarm-notify.c:220 (load_calendars) - Loading Calendar
file:///home/caleb/.evolution/memos/local/system
alarm-notify.c:462 (alarm_notify_add_calendar)
file:///home/caleb/.evolution/memos/local/system - Calendar Open Async...
0x80dbc40
alarm-notify.c:393 (cal_opened_cb)
file:///home/caleb/.evolution/calendar/local/system - Calendar Status 0
alarm-queue.c:2052 (alarm_queue_add_client) - Posting a task
alarm-notify.c:349 (alarm_msg_received) - 0x80df6c8: Received at thread b4610b90
alarm-queue.c:2003 (alarm_queue_add_async) - 0x80c0230
alarm-queue.c:581 (load_alarms_for_today) - From Wed Jun 11 22:06:22 2008
to Wed Jun 11 22:06:22 2008
alarm-queue.c:518 (load_alarms)
alarm-queue.c:547 (load_alarms) - Setting Call backs
alarm-notify.c:337 (alarm_msgport_replied) - 0x80df6c8: Replied to GUI thread
alarm-notify.c:393 (cal_opened_cb)
file:///home/caleb/.evolution/tasks/local/system - Calendar Status 0
alarm-queue.c:2052 (alarm_queue_add_client) - Posting a task
alarm-notify.c:349 (alarm_msg_received) - 0x80db3e0: Received at thread b4610b90
alarm-queue.c:2003 (alarm_queue_add_async) - 0x80d9150
alarm-queue.c:581 (load_alarms_for_today) - From Wed Jun 11 22:06:22 2008
to Wed Jun 11 22:06:22 2008
alarm-queue.c:518 (load_alarms)
alarm-queue.c:547 (load_alarms) - Setting Call backs
alarm-notify.c:337 (alarm_msgport_replied) - 0x80db3e0: Replied to GUI thread
alarm-notify.c:393 (cal_opened_cb)
file:///home/caleb/.evolution/memos/local/system - Calendar Status 0
alarm-queue.c:2052 (alarm_queue_add_client) - Posting a task
alarm-notify.c:349 (alarm_msg_received) - 0x80cf070: Received at thread b4610b90
alarm-queue.c:2003 (alarm_queue_add_async) - 0x80dbc40
alarm-queue.c:581 (load_alarms_for_today) - From Wed Jun 11 22:06:22 2008
to Wed Jun 11 22:06:22 2008
alarm-queue.c:518 (load_alarms)
alarm-queue.c:547 (load_alarms) - Setting Call backs
alarm-notify.c:337 (alarm_msgport_replied) - 0x80cf070: Replied to GUI thread
alarm-notify.c:393 (cal_opened_cb) contacts:/// - Calendar Status 0
alarm-queue.c:2052 (alarm_queue_add_client) - Posting a task
alarm-notify.c:349 (alarm_msg_received) - 0x80de148: PID TTY TIME CMD
(yelp:6338): Yelp-WARNING **: YelpDocument: Attempted to add an ID
mapping from x-yelp-index to x-yelp-index, but x-yelp-index is already
mapped.
(yelp:6338): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at
session startup.
(yelp:6338): atk-bridge-WARNING **: IOR not set.
(yelp:6338): atk-bridge-WARNING **: Could not locate registry
(yelp:6348): Yelp-WARNING **: YelpDocument: Attempted to add an ID
mapping from x-yelp-index to x-yelp-index, but x-yelp-index is already
mapped.
(yelp:6348): atk-bridge-WARNING **: AT_SPI_REGISTRY was not started at
session startup.
(yelp:6348): atk-bridge-WARNING **: IOR not set.
(yelp:6348): atk-bridge-WARNING **: Could not locate registry
--
The allowed limit of flexible X servers reached
https://bugs.launchpad.net/bugs/232078
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
