Here is dmesg running 2.6.25-1 kernel
[ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Linux version 2.6.25-1-generic ([EMAIL PROTECTED]) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Fri May 2 18:59:47 UTC 2008 (Ubuntu 2.6.25-1.2ubuntu2-generic) [ 0.000000] Command line: root=UUID=eb2e7b5c-9619-4df8-a6d7-6569965d434f ro quiet splash [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf5ffc00 (usable) [ 0.000000] BIOS-e820: 00000000bf5ffc00 - 00000000bf601c00 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf603c00 - 00000000bf653c00 (reserved) [ 0.000000] BIOS-e820: 00000000bf653c00 - 00000000bf655c00 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf655c00 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fed00400 (reserved) [ 0.000000] BIOS-e820: 00000000fed20000 - 00000000feda0000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 000000013c000000 (usable) [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 783871) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used [ 0.000000] max_pfn_mapped = 1294336 [ 0.000000] x86: PAT support disabled. [ 0.000000] init_memory_mapping [ 0.000000] DMI 2.3 present. [ 0.000000] ACPI: RSDP 000FEBF0, 0024 (r2 DELL ) [ 0.000000] ACPI: XSDT 000FCE99, 006C (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: FACP 000FCFC1, 00F4 (r3 DELL B8K 14 ASL 61) [ 0.000000] ACPI: DSDT FFF6A119, 473C (r1 DELL dt_ex 1000 INTL 20050624) [ 0.000000] ACPI: FACS BF5FFC00, 0040 [ 0.000000] ACPI: SSDT FFF6E974, 00AA (r1 DELL st_ex 1000 INTL 20050624) [ 0.000000] ACPI: APIC 000FD0B5, 0092 (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: BOOT 000FD147, 0028 (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: ASF! 000FD16F, 0092 (r32 DELL B8K 14 ASL 61) [ 0.000000] ACPI: MCFG 000FD201, 003E (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: HPET 000FD23F, 0038 (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: TCPA 000FD49B, 0032 (r1 DELL B8K 14 ASL 61) [ 0.000000] ACPI: SLIC 000FD277, 00C0 (r1 DELL B8K 14 ASL 61) [ 0.000000] No NUMA configuration found [ 0.000000] Faking a node at 0000000000000000-000000013c000000 [ 0.000000] Entering add_active_range(0, 0, 159) 0 entries of 3200 used [ 0.000000] Entering add_active_range(0, 256, 783871) 1 entries of 3200 used [ 0.000000] Entering add_active_range(0, 1048576, 1294336) 2 entries of 3200 used [ 0.000000] Bootmem setup node 0 0000000000000000-000000013c000000 [ 0.000000] NODE_DATA [000000000000e000 - 0000000000014fff] [ 0.000000] bootmap [0000000000015000 - 000000000003c7ff] pages 28 [ 0.000000] early res: 0 [0-fff] BIOS data page [ 0.000000] early res: 1 [6000-7fff] TRAMPOLINE [ 0.000000] early res: 2 [200000-6ec8c7] TEXT DATA BSS [ 0.000000] early res: 3 [378ae000-37fefbb7] RAMDISK [ 0.000000] early res: 4 [9fc00-fffff] BIOS reserved [ 0.000000] early res: 5 [8000-dfff] PGTABLE [ 0.000000] [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ 0.000000] [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ 0.000000] [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ 0.000000] [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ 0.000000] [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ 0.000000] [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ 0.000000] [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ 0.000000] [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ 0.000000] [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ 0.000000] [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ 0.000000] [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ 0.000000] [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ 0.000000] [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ 0.000000] [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ 0.000000] [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ 0.000000] [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ 0.000000] [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ 0.000000] [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ 0.000000] [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ 0.000000] [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ 0.000000] [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ 0.000000] [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 [ 0.000000] [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 [ 0.000000] [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0 [ 0.000000] [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007200000 on node 0 [ 0.000000] [ffffe20004200000-ffffe200043fffff] PMD ->ffff810007600000 on node 0 [ 0.000000] [ffffe20004400000-ffffe200045fffff] PMD ->ffff810007a00000 on node 0 [ 0.000000] [ffffe20004600000-ffffe200047fffff] PMD ->ffff810007e00000 on node 0 [ 0.000000] [ffffe20004800000-ffffe200049fffff] PMD ->ffff810008200000 on node 0 [ 0.000000] [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810008600000 on node 0 [ 0.000000] [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810008a00000 on node 0 [ 0.000000] [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810008e00000 on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] DMA32 4096 -> 1048576 [ 0.000000] Normal 1048576 -> 1294336 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0 -> 159 [ 0.000000] 0: 256 -> 783871 [ 0.000000] 0: 1048576 -> 1294336 [ 0.000000] On node 0 totalpages: 1029534 [ 0.000000] DMA zone: 64 pages used for memmap [ 0.000000] DMA zone: 1367 pages reserved [ 0.000000] DMA zone: 2568 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 16320 pages used for memmap [ 0.000000] DMA32 zone: 763455 pages, LIFO batch:31 [ 0.000000] Normal zone: 3840 pages used for memmap [ 0.000000] Normal zone: 241920 pages, LIFO batch:31 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x07] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x01] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x02] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] disabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high level lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Setting APIC routing to flat [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000f0000 [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 [ 0.000000] PM: Registered nosave memory: 00000000bf5ff000 - 00000000bf600000 [ 0.000000] PM: Registered nosave memory: 00000000bf600000 - 00000000bf601000 [ 0.000000] PM: Registered nosave memory: 00000000bf601000 - 00000000bf604000 [ 0.000000] PM: Registered nosave memory: 00000000bf604000 - 00000000bf653000 [ 0.000000] PM: Registered nosave memory: 00000000bf653000 - 00000000bf654000 [ 0.000000] PM: Registered nosave memory: 00000000bf654000 - 00000000bf655000 [ 0.000000] PM: Registered nosave memory: 00000000bf655000 - 00000000bf656000 [ 0.000000] PM: Registered nosave memory: 00000000bf656000 - 00000000c0000000 [ 0.000000] PM: Registered nosave memory: 00000000c0000000 - 00000000e0000000 [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed20000 [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000feda0000 [ 0.000000] PM: Registered nosave memory: 00000000feda0000 - 00000000fee00000 [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fef00000 [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 00000000ffb00000 [ 0.000000] PM: Registered nosave memory: 00000000ffb00000 - 0000000100000000 [ 0.000000] Allocating PCI resources starting at c2000000 (gap: c0000000:20000000) [ 0.000000] SMP: Allowing 8 CPUs, 6 hotplug CPUs [ 0.000000] PERCPU: Allocating 38104 bytes of per cpu data [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1007943 [ 0.000000] Policy zone: Normal [ 0.000000] Kernel command line: root=UUID=eb2e7b5c-9619-4df8-a6d7-6569965d434f ro quiet splash [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 32768 bytes) [ 0.000000] TSC calibrated against PM_TIMER [ 0.000017] time.c: Detected 2658.061 MHz processor. [ 0.001185] Console: colour VGA+ 80x25 [ 0.001187] console [tty0] enabled [ 0.001209] Checking aperture... [ 0.001215] Calgary: detecting Calgary via BIOS EBDA area [ 0.001217] Calgary: Unable to locate Rio Grande table in EBDA - bailing! [ 0.001218] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 0.004000] Placing software IO TLB between 0x9021000 - 0xd021000 [ 0.004000] Memory: 3973456k/5177344k available (2516k kernel code, 144680k reserved, 1409k data, 376k init) [ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.004000] SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1 [ 0.004000] hpet clockevent registered [ 0.080006] Calibrating delay using timer specific routine.. 5319.87 BogoMIPS (lpj=10639742) [ 0.080032] Security Framework initialized [ 0.080040] SELinux: Disabled at boot. [ 0.080042] Capability LSM initialized [ 0.080367] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 0.082263] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes) [ 0.083146] Mount-cache hash table entries: 256 [ 0.083285] Initializing cgroup subsys ns [ 0.083290] Initializing cgroup subsys cpuacct [ 0.083292] Initializing cgroup subsys memory [ 0.083306] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.083307] CPU: L2 cache: 4096K [ 0.083310] CPU 0/0 -> Node 0 [ 0.083311] CPU: Physical Processor ID: 0 [ 0.083312] CPU: Processor Core ID: 0 [ 0.083319] CPU0: Thermal monitoring enabled (TM2) [ 0.083320] using mwait in idle threads. [ 0.084037] ACPI: Core revision 20070126 [ 0.327243] CPU0: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz stepping 06 [ 0.327246] Using local APIC timer interrupts. [ 0.328021] APIC timer calibration result 16612906 [ 0.328022] Detected 16.612 MHz APIC timer. [ 0.328124] Booting processor 1/1 ip 6000 [ 0.004000] Initializing CPU#1 [ 0.004000] Calibrating delay using timer specific routine.. 5316.15 BogoMIPS (lpj=10632311) [ 0.004000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.004000] CPU: L2 cache: 4096K [ 0.004000] CPU 1/1 -> Node 0 [ 0.004000] CPU: Physical Processor ID: 0 [ 0.004000] CPU: Processor Core ID: 1 [ 0.004000] CPU1: Thermal monitoring enabled (TM2) [ 0.004000] x86: PAT support disabled. [ 0.416937] CPU1: Intel(R) Core(TM)2 CPU 6700 @ 2.66GHz stepping 06 [ 0.416957] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.420050] Brought up 2 CPUs [ 0.420052] Total of 2 processors activated (10636.02 BogoMIPS). [ 0.420110] CPU0 attaching sched-domain: [ 0.420112] domain 0: span 03 [ 0.420113] groups: 01 02 [ 0.420116] domain 1: span 03 [ 0.420117] groups: 03 [ 0.420119] CPU1 attaching sched-domain: [ 0.420120] domain 0: span 03 [ 0.420121] groups: 02 01 [ 0.420123] domain 1: span 03 [ 0.420124] groups: 03 [ 0.420350] net_namespace: 1192 bytes [ 0.420354] Booting paravirtualized kernel on bare hardware [ 0.420476] NET: Registered protocol family 16 [ 0.420633] ACPI: bus type pci registered [ 0.420692] PCI: Using configuration type 1 [ 0.433161] ACPI: EC: Look up EC in DSDT [ 0.482550] ACPI: BIOS _OSI(Linux) query ignored [ 0.482551] ACPI: DMI System Vendor: Dell Inc. [ 0.482553] ACPI: DMI Product Name: OptiPlex 745 [ 0.482554] ACPI: DMI Product Version: [ 0.482555] ACPI: DMI Board Name: 0MM599 [ 0.482556] ACPI: DMI BIOS Vendor: Dell Inc. [ 0.482557] ACPI: DMI BIOS Date: 05/21/2007 [ 0.482558] ACPI: Please send DMI info above to [EMAIL PROTECTED] [ 0.482559] ACPI: If "acpi_osi=Linux" works better, please notify [EMAIL PROTECTED] [ 0.501735] ACPI: Interpreter enabled [ 0.501737] ACPI: (supports S0 S1 S3 S4 S5) [ 0.501748] ACPI: Using IOAPIC for interrupt routing [ 0.596064] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.596637] pci 0000:00:1f.0: quirk: region 0800-087f claimed by ICH6 ACPI/GPIO/TCO [ 0.596640] pci 0000:00:1f.0: quirk: region 0880-08bf claimed by ICH6 GPIO [ 0.596954] PCI: Transparent bridge - 0000:00:1e.0 [ 0.596976] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.597707] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI4._PRT] [ 0.598340] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI2._PRT] [ 0.598806] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 0.599268] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI5._PRT] [ 1.713011] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 15) [ 1.713767] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 15) [ 1.714531] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 7 9 10 11 12 15) [ 1.715282] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 1.716034] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 1.716842] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 15) *0, disabled. [ 1.717600] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *9 10 11 12 15) [ 1.718363] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 *5 6 7 9 10 11 12 15) [ 1.718742] ACPI Warning (tbutils-0217): Incorrect checksum in table [TCPA] - 00, should be 89 [20070126] [ 1.718749] Linux Plug and Play Support v0.97 (c) Adam Belay [ 1.718772] pnp: PnP ACPI init [ 1.718777] ACPI: bus type pnp registered [ 1.777804] pnpacpi: exceeded the max number of IO resources: 40 [ 1.778090] pnp: PnP ACPI: found 11 devices [ 1.778091] ACPI: ACPI bus type pnp unregistered [ 1.778300] PCI: Using ACPI for IRQ routing [ 1.778302] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 1.796126] NET: Registered protocol family 8 [ 1.796128] NET: Registered protocol family 20 [ 1.796174] PCI-GART: No AMD northbridge found. [ 1.796179] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 1.796183] hpet0: 3 64-bit timers, 14318180 Hz [ 1.800126] Switched to high resolution mode on CPU 0 [ 1.380098] Switched to high resolution mode on CPU 1 [ 1.812138] system 00:01: ioport range 0x800-0x85f has been reserved [ 1.812141] system 00:01: ioport range 0xc00-0xc7f has been reserved [ 1.812144] system 00:01: ioport range 0x860-0x8ff could not be reserved [ 1.812155] system 00:08: iomem range 0x0-0x9ffff could not be reserved [ 1.812158] system 00:08: iomem range 0x100000-0xffffff could not be reserved [ 1.812161] system 00:08: iomem range 0x1000000-0xbf5ffbff could not be reserved [ 1.812164] system 00:08: iomem range 0xf0000-0xfffff could not be reserved [ 1.812167] system 00:08: iomem range 0xc0000-0xcffff has been reserved [ 1.812171] system 00:08: iomem range 0xfec00000-0xfecfffff could not be reserved [ 1.812174] system 00:08: iomem range 0xfee00000-0xfeefffff could not be reserved [ 1.812177] system 00:08: iomem range 0xffb00000-0xffbfffff could not be reserved [ 1.812180] system 00:08: iomem range 0xffc00000-0xffffffff could not be reserved [ 1.812186] system 00:09: ioport range 0x100-0x1fe has been reserved [ 1.812189] system 00:09: ioport range 0x200-0x277 has been reserved [ 1.812192] system 00:09: ioport range 0x280-0x2e7 has been reserved [ 1.812195] system 00:09: ioport range 0x2f0-0x2f7 has been reserved [ 1.812197] system 00:09: ioport range 0x300-0x377 has been reserved [ 1.812200] system 00:09: ioport range 0x380-0x3bb has been reserved [ 1.812203] system 00:09: ioport range 0x3c0-0x3e7 could not be reserved [ 1.812206] system 00:09: ioport range 0x3f6-0x3f7 has been reserved [ 1.812209] system 00:09: ioport range 0x400-0x4cf has been reserved [ 1.812212] system 00:09: ioport range 0x4d2-0x57f has been reserved [ 1.812214] system 00:09: ioport range 0x580-0x677 has been reserved [ 1.812217] system 00:09: ioport range 0x680-0x777 has been reserved [ 1.812220] system 00:09: ioport range 0x780-0x7bb has been reserved [ 1.812223] system 00:09: ioport range 0x7c0-0x7ff has been reserved [ 1.812226] system 00:09: ioport range 0x8e0-0x8ff has been reserved [ 1.812228] system 00:09: ioport range 0x900-0x9fe has been reserved [ 1.812231] system 00:09: ioport range 0xa00-0xafe has been reserved [ 1.812234] system 00:09: ioport range 0xb00-0xbfe has been reserved [ 1.812237] system 00:09: ioport range 0xc80-0xcaf has been reserved [ 1.812240] system 00:09: ioport range 0xcc0-0xcf7 has been reserved [ 1.812242] system 00:09: ioport range 0xd00-0xdfe has been reserved [ 1.812245] system 00:09: ioport range 0xe00-0xefe has been reserved [ 1.812248] system 00:09: ioport range 0xf00-0xffe has been reserved [ 1.812251] system 00:09: ioport range 0x2000-0x20fe has been reserved [ 1.812254] system 00:09: ioport range 0x2100-0x21fe has been reserved [ 1.812257] system 00:09: ioport range 0x2200-0x22fe has been reserved [ 1.812260] system 00:09: ioport range 0x2300-0x23fe has been reserved [ 1.812262] system 00:09: ioport range 0x2400-0x24fe has been reserved [ 1.812265] system 00:09: ioport range 0x2500-0x25fe has been reserved [ 1.812268] system 00:09: ioport range 0x2600-0x26fe has been reserved [ 1.812271] system 00:09: ioport range 0x2700-0x27fe has been reserved [ 1.812274] system 00:09: ioport range 0x2800-0x28fe has been reserved [ 1.812277] system 00:09: ioport range 0x2900-0x29fe has been reserved [ 1.812280] system 00:09: ioport range 0x2a00-0x2afe has been reserved [ 1.812283] system 00:09: ioport range 0x2b00-0x2bfe has been reserved [ 1.812286] system 00:09: ioport range 0x2c00-0x2cfe has been reserved [ 1.812289] system 00:09: ioport range 0x2d00-0x2dfe has been reserved [ 1.812292] system 00:09: ioport range 0x2e00-0x2efe has been reserved [ 1.812294] system 00:09: ioport range 0x2f00-0x2ffe has been reserved [ 1.812297] system 00:09: ioport range 0x5000-0x50fe has been reserved [ 1.812301] system 00:09: iomem range 0xe0000000-0xefffffff could not be reserved [ 1.812304] system 00:09: iomem range 0xfeda0000-0xfedacfff has been reserved [ 1.812704] PCI: Bridge: 0000:00:01.0 [ 1.812705] IO window: disabled. [ 1.812707] MEM window: 0xdfc00000-0xdfcfffff [ 1.812709] PREFETCH window: disabled. [ 1.812712] PCI: Bridge: 0000:00:1c.0 [ 1.812713] IO window: disabled. [ 1.812716] MEM window: 0xdfb00000-0xdfbfffff [ 1.812719] PREFETCH window: disabled. [ 1.812723] PCI: Bridge: 0000:00:1c.4 [ 1.812723] IO window: disabled. [ 1.812727] MEM window: 0xdfa00000-0xdfafffff [ 1.812729] PREFETCH window: disabled. [ 1.812733] PCI: Bridge: 0000:00:1e.0 [ 1.812734] IO window: disabled. [ 1.812737] MEM window: disabled. [ 1.812739] PREFETCH window: disabled. [ 1.812751] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.812754] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.812766] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.812770] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.812782] ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 [ 1.812785] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 1.812793] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 1.812801] NET: Registered protocol family 2 [ 1.848301] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes) [ 1.849283] TCP established hash table entries: 524288 (order: 11, 8388608 bytes) [ 1.852270] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.852748] TCP: Hash tables configured (established 524288 bind 65536) [ 1.852750] TCP reno registered [ 1.864394] checking if image is initramfs... it is [ 2.368388] Freeing initrd memory: 7430k freed [ 2.371231] Simple Boot Flag at 0x7a set to 0x80 [ 1.951600] audit: initializing netlink socket (disabled) [ 1.951616] type=2000 audit(1210284091.368:1): initialized [ 1.953448] VFS: Disk quotas dquot_6.5.1 [ 1.953504] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.953591] io scheduler noop registered [ 1.953593] io scheduler anticipatory registered [ 1.953594] io scheduler deadline registered [ 1.953676] io scheduler cfq registered (default) [ 1.953686] pci 0000:00:02.0: Boot video device [ 1.953846] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 1.953867] assign_interrupt_mode Found MSI capability [ 1.953889] Allocate Port Service[0000:00:01.0:pcie00] [ 1.953947] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 1.953970] assign_interrupt_mode Found MSI capability [ 1.953994] Allocate Port Service[0000:00:1c.0:pcie00] [ 1.954023] Allocate Port Service[0000:00:1c.0:pcie02] [ 1.954087] PCI: Setting latency timer of device 0000:00:1c.4 to 64 [ 1.954110] assign_interrupt_mode Found MSI capability [ 1.954134] Allocate Port Service[0000:00:1c.4:pcie00] [ 1.954161] Allocate Port Service[0000:00:1c.4:pcie02] [ 1.971025] Real Time Clock Driver v1.12ac [ 1.971336] hpet_resources: 0xfed00000 is busy [ 1.971369] Linux agpgart interface v0.103 [ 1.971371] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 1.971483] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.971910] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 1.972624] brd: module loaded [ 1.972673] input: Macintosh mouse button emulation as /class/input/input0 [ 1.972787] PNP: No PS/2 controller found. Probing ports directly. [ 2.395605] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.395610] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.416296] mice: PS/2 mouse device common for all mice [ 2.416346] cpuidle: using governor ladder [ 2.416348] cpuidle: using governor menu [ 2.416697] NET: Registered protocol family 1 [ 2.416815] registered taskstats version 1 [ 2.416909] /build/buildd/linux-2.6.25/drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 2.416911] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.416912] EDD information not available. [ 2.416918] Freeing unused kernel memory: 376k freed [ 3.074454] fuse init (API version 7.9) [ 2.661164] ACPI: ACPI0007:00 is registered as cooling_device0 [ 2.661208] ACPI: ACPI0007:01 is registered as cooling_device1 [ 2.991507] usbcore: registered new interface driver usbfs [ 2.991522] usbcore: registered new interface driver hub [ 2.997210] usbcore: registered new device driver usb [ 3.014443] USB Universal Host Controller Interface driver v3.0 [ 3.014478] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.014487] PCI: Setting latency timer of device 0000:00:1a.0 to 64 [ 3.014490] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 3.014609] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 [ 3.014634] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000ff20 [ 3.014727] usb usb1: configuration #1 chosen from 1 choice [ 3.014744] hub 1-0:1.0: USB hub found [ 3.014749] hub 1-0:1.0: 2 ports detected [ 3.038871] No dock devices found. [ 3.469179] SCSI subsystem initialized [ 3.476401] libata version 3.00 loaded. [ 3.116391] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 3.116401] PCI: Setting latency timer of device 0000:00:1a.1 to 64 [ 3.116403] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 3.116421] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 [ 3.116445] uhci_hcd 0000:00:1a.1: irq 17, io base 0x0000ff00 [ 3.116525] usb usb2: configuration #1 chosen from 1 choice [ 3.116542] hub 2-0:1.0: USB hub found [ 3.116546] hub 2-0:1.0: 2 ports detected [ 3.140376] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 3.140382] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 3.140384] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 3.140401] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3 [ 3.140422] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000ff80 [ 3.140489] usb usb3: configuration #1 chosen from 1 choice [ 3.140503] hub 3-0:1.0: USB hub found [ 3.140507] hub 3-0:1.0: 2 ports detected [ 3.164270] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 22 (level, low) -> IRQ 22 [ 3.164280] PCI: Setting latency timer of device 0000:00:1a.7 to 64 [ 3.164283] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 3.164297] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4 [ 3.168211] ehci_hcd 0000:00:1a.7: debug port 1 [ 3.168215] PCI: cache line size of 32 is not supported by device 0000:00:1a.7 [ 3.168221] ehci_hcd 0000:00:1a.7: irq 22, io mem 0xdfdfbc00 [ 3.632244] usb 1-1: new low speed USB device using uhci_hcd and address 2 [ 3.188216] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.192219] usb usb4: configuration #1 chosen from 1 choice [ 3.192242] hub 4-0:1.0: USB hub found [ 3.192249] hub 4-0:1.0: 4 ports detected [ 3.228230] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 [ 3.228239] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 3.228242] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 3.228276] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 5 [ 3.228293] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000ff60 [ 3.228360] usb usb5: configuration #1 chosen from 1 choice [ 3.228375] hub 5-0:1.0: USB hub found [ 3.228379] hub 5-0:1.0: 2 ports detected [ 3.264278] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 3.264284] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 3.264286] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 3.264302] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 6 [ 3.264322] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000ff40 [ 3.264389] usb usb6: configuration #1 chosen from 1 choice [ 3.264403] hub 6-0:1.0: USB hub found [ 3.264407] hub 6-0:1.0: 2 ports detected [ 3.308352] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 3.308360] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.308362] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.308378] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7 [ 3.312268] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.312272] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.312275] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xff980800 [ 3.796254] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 3.352226] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.356235] usb usb7: configuration #1 chosen from 1 choice [ 3.356259] hub 7-0:1.0: USB hub found [ 3.356266] hub 7-0:1.0: 6 ports detected [ 3.836247] tg3.c:v3.90 (April 12, 2008) [ 3.836247] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 3.836247] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 3.860691] eth0: Tigon3 [partno(BCM95754) rev b002 PHY(5787)] (PCI Express) 10/100/1000Base-T Ethernet 00:1a:a0:a6:d5:30 [ 3.860694] eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] [ 3.860696] eth0: dma_rwctrl[76180000] dma_mask[64-bit] [ 3.866509] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20 [ 3.866534] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.866543] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 3.866557] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 20 [ 3.866569] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 3.866575] ACPI: PCI interrupt for device 0000:00:1f.5 disabled [ 3.868252] ata_piix 0000:00:1f.2: version 2.12 [ 3.868258] ACPI: PCI Interrupt 0000:00:1f.2[C] -> GSI 20 (level, low) -> IRQ 20 [ 3.868261] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 3.936269] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 3.936355] scsi0 : ata_piix [ 3.936544] scsi1 : ata_piix [ 3.941195] ata1: SATA max UDMA/133 cmd 0xfe00 ctl 0xfe10 bmdma 0xfec0 irq 20 [ 3.941199] ata2: SATA max UDMA/133 cmd 0xfe20 ctl 0xfe30 bmdma 0xfec8 irq 20 [ 4.056271] usb 7-2: new high speed USB device using ehci_hcd and address 2 [ 3.604280] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 4.100481] ata1.00: ATA-7: ST3160815AS, 3.ADA, max UDMA/133 [ 4.100485] ata1.00: 312500000 sectors, multi 8: LBA48 NCQ (depth 0/32) [ 4.132266] usb 7-2: configuration #1 chosen from 1 choice [ 4.159474] ata1.00: configured for UDMA/133 [ 4.224280] usb 1-1: new low speed USB device using uhci_hcd and address 3 [ 4.260274] usb 1-1: configuration #1 chosen from 1 choice [ 3.832287] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 3.832385] ata2.01: NODEV after polling detection [ 3.836423] ata2.00: ATAPI: HL-DT-STDVD+-RW GSA-H31N, B109, max UDMA/100 [ 3.852429] ata2.00: configured for UDMA/100 [ 4.340279] scsi 0:0:0:0: Direct-Access ATA ST3160815AS 3.AD PQ: 0 ANSI: 5 [ 4.340279] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD+-RW GSA-H31N B109 PQ: 0 ANSI: 5 [ 4.340279] ACPI: PCI Interrupt 0000:00:1f.5[C] -> GSI 20 (level, low) -> IRQ 20 [ 4.340279] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 4.388297] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 4.388340] scsi2 : ata_piix [ 4.388399] scsi3 : ata_piix [ 4.388429] ata3: SATA max UDMA/133 cmd 0xfe40 ctl 0xfe50 bmdma 0xfed0 irq 20 [ 4.388433] ata4: SATA max UDMA/133 cmd 0xfe60 ctl 0xfe70 bmdma 0xfed8 irq 20 [ 4.404292] usb 1-2: new low speed USB device using uhci_hcd and address 4 [ 4.456286] usb 1-2: configuration #1 chosen from 1 choice [ 3.947175] usbcore: registered new interface driver libusual [ 4.460616] usbcore: registered new interface driver hiddev [ 3.949557] Initializing USB Mass Storage driver... [ 3.949608] scsi4 : SCSI emulation for USB Mass Storage devices [ 4.461926] usb-storage: device found at 2 [ 4.461927] usb-storage: waiting for device to settle before scanning [ 4.492269] input: Dell Dell USB Keyboard as /class/input/input1 [ 4.504316] input,hidraw0: USB HID v1.10 Keyboard [Dell Dell USB Keyboard] on usb-0000:00:1a.0-1 [ 4.517164] input: Logitech Optical USB Mouse as /class/input/input2 [ 4.532334] input,hidraw1: USB HID v1.10 Mouse [Logitech Optical USB Mouse] on usb-0000:00:1a.0-2 [ 4.532380] usbcore: registered new interface driver usbhid [ 4.020109] usbcore: registered new interface driver usb-storage [ 4.532385] /build/buildd/linux-2.6.25/drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver [ 4.020118] USB Mass Storage support registered. [ 4.052288] ata3: SATA link down (SStatus 0 SControl 300) [ 4.132283] ata4: SATA link down (SStatus 0 SControl 300) [ 4.621065] Driver 'sd' needs updating - please use bus_type methods [ 4.621126] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB) [ 4.621136] sd 0:0:0:0: [sda] Write Protect is off [ 4.621137] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.621152] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.621188] sd 0:0:0:0: [sda] 312500000 512-byte hardware sectors (160000 MB) [ 4.621196] sd 0:0:0:0: [sda] Write Protect is off [ 4.621198] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.621212] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.621214] sda:<4>Driver 'sr' needs updating - please use bus_type methods [ 4.637591] sda1 sda2 < sda5 > [ 4.664299] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.664299] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.664299] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 4.186722] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 4.186724] Uniform CD-ROM driver Revision: 3.20 [ 4.186758] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.838527] PM: Starting manual resume from disk [ 4.838529] PM: Resume from partition 8:5 [ 4.838530] PM: Checking hibernation image. [ 4.838679] PM: Resume from disk failed. [ 4.382777] kjournald starting. Commit interval 5 seconds [ 4.871071] EXT3-fs: mounted filesystem with ordered data mode. [ 7.509963] usb-storage: device scan complete [ 5.333956] scsi 4:0:0:0: Direct-Access TEAC USB HS-CF Card 4.00 PQ: 0 ANSI: 0 [ 5.337535] scsi 4:0:0:1: Direct-Access TEAC USB HS-xD/SM 4.00 PQ: 0 ANSI: 0 [ 5.341325] scsi 4:0:0:2: Direct-Access TEAC USB HS-MS Card 4.00 PQ: 0 ANSI: 0 [ 5.344809] scsi 4:0:0:3: Direct-Access TEAC USB HS-SD Card 4.00 PQ: 0 ANSI: 0 [ 5.349095] sd 4:0:0:0: [sdb] Attached SCSI removable disk [ 5.349131] sd 4:0:0:0: Attached scsi generic sg2 type 0 [ 5.353692] sd 4:0:0:1: [sdc] Attached SCSI removable disk [ 5.353723] sd 4:0:0:1: Attached scsi generic sg3 type 0 [ 5.358569] sd 4:0:0:2: [sdd] Attached SCSI removable disk [ 5.358601] sd 4:0:0:2: Attached scsi generic sg4 type 0 [ 5.372345] sd 4:0:0:3: [sde] Attached SCSI removable disk [ 5.372345] sd 4:0:0:3: Attached scsi generic sg5 type 0 [ 9.239590] ip_tables: (C) 2000-2006 Netfilter Core Team [ 9.264046] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 9.853649] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2) [ 10.280925] agpgart: Detected an Intel 965Q Chipset. [ 10.281676] agpgart: Detected 7676K stolen memory. [ 10.293925] agpgart: AGP aperture is 256M @ 0xc0000000 [ 10.314890] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 10.342104] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 10.350074] input: Power Button (FF) as /class/input/input3 [ 10.400770] ACPI: Power Button (FF) [PWRF] [ 10.400866] input: Power Button (CM) as /class/input/input4 [ 10.464707] ACPI: Power Button (CM) [VBTN] [ 7.871755] iTCO_vendor_support: vendor-support=0 [ 10.883022] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) [ 10.883091] iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware [ 10.883097] iTCO_wdt: No card detected [ 11.042528] input: PC Speaker as /class/input/input5 [ 11.177457] parport_pc 00:06: reported by Plug and Play ACPI [ 11.177511] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO [PCSPP,TRISTATE,COMPAT,ECP] [ 11.373428] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 11.373443] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 11.928231] NET: Registered protocol family 10 [ 11.928583] lo: Disabled Privacy Extensions [ 11.928933] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 12.062125] lp0: using parport0 (interrupt-driven). [ 12.122259] Adding 6385796k swap on /dev/sda5. Priority:-1 extents:1 across:6385796k [ 12.292779] tg3: eth0: Link is up at 1000 Mbps, full duplex. [ 12.292779] tg3: eth0: Flow control is on for TX and on for RX. [ 12.292779] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 9.298335] EXT3 FS on sda1, internal journal [ 13.262990] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: found ejectable bay [ 13.262994] ACPI: \_SB_.PCI0.IDE1.PRI1.MAS1: Adding notify handler [ 13.263014] ACPI: Error installing bay notify handler [ 13.263016] ACPI: Bay [\_SB_.PCI0.IDE1.PRI1.MAS1] Added [ 14.116154] warning: `ntpd' uses 32-bit capabilities (legacy support in use) [ 14.396911] ppdev: user-space parallel port driver [ 15.458481] Bluetooth: Core ver 2.11 [ 15.459234] NET: Registered protocol family 31 [ 15.459237] Bluetooth: HCI device and connection manager initialized [ 15.459239] Bluetooth: HCI socket layer initialized [ 15.502070] Bluetooth: L2CAP ver 2.9 [ 15.502073] Bluetooth: L2CAP socket layer initialized [ 12.393321] Bluetooth: RFCOMM socket layer initialized [ 12.393614] Bluetooth: RFCOMM TTY layer initialized [ 12.393616] Bluetooth: RFCOMM ver 1.8 [ 16.613053] eth0: no IPv6 routers present [ 18.438745] mtrr: type mismatch for c0760000,10000 old: write-back new: write-combining [ 18.438913] mtrr: type mismatch for c0740000,20000 old: write-back new: write-combining [ 18.439019] mtrr: type mismatch for c0700000,40000 old: write-back new: write-combining [ 18.439124] mtrr: type mismatch for c0600000,100000 old: write-back new: write-combining [ 18.439229] mtrr: type mismatch for c0400000,200000 old: write-back new: write-combining [ 18.439334] mtrr: type mismatch for c0000000,400000 old: write-back new: write-combining -- x-server crashes on startup with intel GMA3000 https://bugs.launchpad.net/bugs/223870 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
