Hi Andrew

uname -a
Linux edeval-laptop 2.6.22-14-generic #1 SMP Tue Feb 12 02:46:46 UTC 2008 
x86_64 GNU/Linux

sudo lspci -vvnn

   Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

00:02.1 Display controller [0380]: Intel Corporation Mobile GM965/GL960 
Integrated Graphics Controller [8086:2a03] (rev 03)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Region 0: Memory at 98500000 (64-bit, non-prefetchable) [disabled] 
[size=1M]
        Capabilities: [d0] Power Management version 3
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot-,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
                Bridge: PM- B3+

00:1a.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Contoller #4 [8086:2834] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 16
        Region 4: I/O ports at 50c0 [size=32]

00:1a.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #5 [8086:2835] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 21
        Region 4: I/O ports at 50a0 [size=32]

00:1a.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #2 [8086:283a] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 0: Memory at 98404c00 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1b.0 Audio device [0403]: Intel Corporation 82801H (ICH8 Family) HD Audio 
Controller [8086:284b] (rev 03)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 22
        Region 0: Memory at 98400000 (64-bit, non-prefetchable) [size=16K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [70] Express Unknown type IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <64ns, L1 <1us
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed unknown, Width x0, ASPM unknown, Port 0
                Link: Latency L0s <64ns, L1 <1us
                Link: ASPM Disabled CommClk- ExtSynch-
                Link: Speed unknown, Width x0

00:1c.0 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 1 [8086:283f] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: 97400000-983fffff
        Prefetchable memory behind bridge: 0000000090000000-0000000090ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 1
                Link: Latency L0s <1us, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x0
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 0, PowerLimit 6.500000
                Slot: Enabled AtnBtn+ PwrFlt- MRL- PresDet+ CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Acer Incorporated [ALI] Unknown device 
[1025:011e]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.1 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 2 [8086:2841] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: 96400000-973fffff
        Prefetchable memory behind bridge: 0000000091000000-0000000091ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 2
                Link: Latency L0s <1us, L1 <4us
                Link: ASPM Disabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x0
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 1, PowerLimit 6.500000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Acer Incorporated [ALI] Unknown device 
[1025:011e]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.2 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 3 [8086:2843] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=05, subordinate=05, sec-latency=0
        I/O behind bridge: 00002000-00002fff
        Memory behind bridge: 95300000-963fffff
        Prefetchable memory behind bridge: 0000000092000000-0000000092ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 3
                Link: Latency L0s <1us, L1 <4us
                Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 2, PowerLimit 6.500000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Acer Incorporated [ALI] Unknown device 
[1025:011e]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1c.3 PCI bridge [0604]: Intel Corporation 82801H (ICH8 Family) PCI Express 
Port 4 [8086:2845] (rev 03) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=06, subordinate=06, sec-latency=0
        I/O behind bridge: 00001000-00001fff
        Memory behind bridge: 94200000-952fffff
        Prefetchable memory behind bridge: 0000000093000000-0000000093ffffff
        Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [40] Express Root Port (Slot+) IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s unlimited, L1 unlimited
                Device: Errors: Correctable+ Non-Fatal+ Fatal+ Unsupported+
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 4
                Link: Latency L0s <1us, L1 <4us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x1
                Slot: AtnBtn- PwrCtrl- MRL- AtnInd- PwrInd- HotPlug+ Surpise+
                Slot: Number 3, PowerLimit 6.500000
                Slot: Enabled AtnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
                Slot: AttnInd Unknown, PwrInd Unknown, Power-
                Root: Correctable- Non-Fatal- Fatal- PME-
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0 
Enable-
                Address: 00000000  Data: 0000
        Capabilities: [90] Subsystem: Acer Incorporated [ALI] Unknown device 
[1025:011e]
        Capabilities: [a0] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:1d.0 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #1 [8086:2830] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 4: I/O ports at 5080 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #2 [8086:2831] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 4: I/O ports at 5060 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB UHCI 
Controller #3 [8086:2832] (rev 03) (prog-if 00 [UHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 18
        Region 4: I/O ports at 5040 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801H (ICH8 Family) USB2 EHCI 
Controller #1 [8086:2836] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 23
        Region 0: Memory at 98404800 (32-bit, non-prefetchable) [size=1K]
        Capabilities: [50] Power Management version 2
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [58] Debug port

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev f3) (prog-if 01 [Subtractive decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Bus: primary=00, secondary=07, subordinate=07, sec-latency=32
        Memory behind bridge: 94100000-941fffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
        Capabilities: [50] Subsystem: Acer Incorporated [ALI] Unknown device 
[1025:011e]

00:1f.0 ISA bridge [0601]: Intel Corporation 82801HEM (ICH8M) LPC Interface 
Controller [8086:2815] (rev 03)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Capabilities: [e0] Vendor Specific Information

00:1f.1 IDE interface [0101]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) 
IDE Controller [8086:2850] (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 50e0 [size=16]

00:1f.2 SATA controller [0106]: Intel Corporation 82801HBM/HEM (ICH8M/ICH8M-E) 
SATA AHCI Controller [8086:2829] (rev 03) (prog-if 01 [AHCI 1.0])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 19
        Region 0: I/O ports at 50f8 [size=8]
        Region 1: I/O ports at 511c [size=4]
        Region 2: I/O ports at 50f0 [size=8]
        Region 3: I/O ports at 5118 [size=4]
        Region 4: I/O ports at 5020 [size=32]
        Region 5: Memory at 98404000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/2 
Enable-
                Address: 00000000  Data: 0000
        Capabilities: [70] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold-)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [a8] #12 [0010]

00:1f.3 SMBus [0c05]: Intel Corporation 82801H (ICH8 Family) SMBus Controller 
[8086:283e] (rev 03)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at 98405000 (32-bit, non-prefetchable) [size=256]
        Region 4: I/O ports at 5000 [size=32]

05:00.0 Ethernet controller [0200]: Broadcom Corporation NetLink BCM5787M 
Gigabit Ethernet PCI Express [14e4:1693] (rev 02)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 18
        Region 0: Memory at 95300000 (64-bit, non-prefetchable) [size=64K]
        Capabilities: [48] Power Management version 3
                Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA 
PME(D0-,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=1 PME-
        Capabilities: [50] Vital Product Data
        Capabilities: [58] Vendor Specific Information
        Capabilities: [e8] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
                Address: 226ea4440002845c  Data: 25c5
        Capabilities: [d0] Express Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag+
                Device: Latency L0s <4us, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
                Device: MaxPayload 128 bytes, MaxReadReq 4096 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <4us, L1 <64us
                Link: ASPM L0s L1 Enabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x1

06:00.0 Network controller [0280]: Intel Corporation PRO/Wireless 3945ABG 
Network Connection [8086:4222] (rev 02)
        Subsystem: Intel Corporation Unknown device [8086:1001]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 19
        Region 0: Memory at 94200000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: [c8] Power Management version 2
                Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA 
PME(D0+,D1-,D2-,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=0 PME-
        Capabilities: [d0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 
Enable-
                Address: 0000000000000000  Data: 0000
        Capabilities: [e0] Express Legacy Endpoint IRQ 0
                Device: Supported: MaxPayload 128 bytes, PhantFunc 0, ExtTag-
                Device: Latency L0s <512ns, L1 unlimited
                Device: AtnBtn- AtnInd- PwrInd-
                Device: Errors: Correctable- Non-Fatal- Fatal- Unsupported-
                Device: RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
                Device: MaxPayload 128 bytes, MaxReadReq 128 bytes
                Link: Supported Speed 2.5Gb/s, Width x1, ASPM L0s L1, Port 0
                Link: Latency L0s <128ns, L1 <64us
                Link: ASPM L1 Enabled RCB 64 bytes CommClk- ExtSynch-
                Link: Speed 2.5Gb/s, Width x1

07:00.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller 
[1180:0832] (rev 05) (prog-if 10 [OHCI])
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max)
        Interrupt: pin A routed to IRQ 20
        Region 0: Memory at 94100000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: [dc] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME+

07:00.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 
SD/SDIO/MMC/MS/MSPro Host Adapter [1180:0822] (rev 22)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64
        Interrupt: pin B routed to IRQ 22
        Region 0: Memory at 94100b00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

07:00.2 System peripheral [0880]: Ricoh Co Ltd R5C843 MMC Host Controller 
[1180:0843] (rev 12)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at 94100a00 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

07:00.3 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host 
Adapter [1180:0592] (rev 12)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at 94100900 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-

07:00.4 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller 
[1180:0852] (rev 12)
        Subsystem: Acer Incorporated [ALI] Unknown device [1025:011e]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at 94100800 (32-bit, non-prefetchable) [size=256]
        Capabilities: [80] Power Management version 2
                Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA 
PME(D0+,D1+,D2+,D3hot+,D3cold+)
                Status: D0 PME-Enable- DSel=0 DScale=2 PME-


sudo dmidecode


---------- InĂ­cio da mensagem original -----------

      De: [EMAIL PROTECTED] 2.4 present.
37 structures occupying 1489 bytes.
Table at 0x000E2AE0.

Handle 0x0000, DMI type 0, 24 bytes
BIOS Information
        Vendor: Acer
        Version: V1.17
        Release Date: 09/14/2007
        ROM Size: 1024 kB
        Characteristics:
                PCI is supported
                BIOS is upgradeable
                BIOS shadowing is allowed
                Boot from CD is supported
                Selectable boot is supported
                BIOS ROM is socketed
                EDD is supported
                Japanese floppy for NEC 9800 1.2 MB is supported (int 13h)
                Japanese floppy for Toshiba 1.2 MB is supported (int 13h)
                5.25"/360 KB floppy services are supported (int 13h)
                5.25"/1.2 MB floppy services are supported (int 13h)
                3.5"/720 KB floppy services are supported (int 13h)
                3.5"/2.88 MB floppy services are supported (int 13h)
                8042 keyboard services are supported (int 9h)
                CGA/mono video services are supported (int 10h)
                ACPI is supported
                USB legacy is supported
                Targeted content distribution is supported

Handle 0x0001, DMI type 1, 27 bytes
System Information
        Manufacturer: Acer      
        Product Name: Aspire 5720     
        Version: V1.17
        Serial Number: LXAVG0C003738040711601
        UUID: 69A800FC-20B6-BB79-A0DE-001B3827774E
        Wake-up Type: Power Switch
        SKU Number: None
        Family: None

Handle 0x0002, DMI type 2, 16 bytes
Base Board Information
        Manufacturer: Acer
        Product Name: Nettiling
        Version: V1.17
        Serial Number: Base Board Serial Number
        Asset Tag: Base Board Asset Tag
        Features:
                Board is a hosting board
                Board is replaceable
        Location In Chassis: Base Board Chassis Location
        Chassis Handle: 0x0003
        Type: Motherboard
        Contained Object Handles: 0

Handle 0x0003, DMI type 3, 22 bytes
Chassis Information
        Manufacturer: Acer
        Type: Other
        Lock: Not Present
        Version: V1.17
        Serial Number: Chassis Serial Number
        Asset Tag:                  
        Boot-up State: Safe
        Power Supply State: Safe
        Thermal State: Safe
        Security Status: None
        OEM Information: 0x00000000
        Height: Unspecified
        Number Of Power Cords: 1
        Contained Elements: 0

Handle 0x0004, DMI type 9, 13 bytes
System Slot Information
        Designation: J6C1
        Type: x16 PCI Express
        Current Usage: Available
        Length: Other
        ID: 0
        Characteristics:
                PME signal is supported
                Hot-plug devices are supported

Handle 0x0005, DMI type 9, 13 bytes
System Slot Information
        Designation: J8C1
        Type: x1 PCI Express
        Current Usage: Available
        Length: Other
        ID: 0
        Characteristics:
                PME signal is supported
                Hot-plug devices are supported

Handle 0x0006, DMI type 9, 13 bytes
System Slot Information
        Designation: J7C1
        Type: x1 PCI Express
        Current Usage: Available
        Length: Other
        ID: 1
        Characteristics:
                PME signal is supported
                Hot-plug devices are supported

Handle 0x0007, DMI type 9, 13 bytes
System Slot Information
        Designation: J8D1
        Type: x1 PCI Express
        Current Usage: Available
        Length: Other
        ID: 2
        Characteristics:
                PME signal is supported
                Hot-plug devices are supported

Handle 0x0008, DMI type 9, 13 bytes
System Slot Information
        Designation: J8B1
        Type: 32-bit PCI
        Current Usage: Available
        Length: Long
        ID: 3
        Characteristics:
                5.0 V is provided
                3.3 V is provided
                Cardbus is supported
                Modem ring resume is supported
                PME signal is supported
                SMBus signal is supported

Handle 0x0009, DMI type 9, 13 bytes
System Slot Information
        Designation: J9B1
        Type: 32-bit PCI
        Current Usage: Available
        Length: Long
        ID: 4
        Characteristics:
                5.0 V is provided
                3.3 V is provided
                Cardbus is supported
                Modem ring resume is supported
                PME signal is supported
                SMBus signal is supported

Handle 0x000A, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: PS/2
        Internal Connector Type: None
        External Reference Designator: Keyboard
        External Connector Type: PS/2
        Port Type: Keyboard Port

Handle 0x000B, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: PS/2
        Internal Connector Type: None
        External Reference Designator: Mouse
        External Connector Type: PS/2
        Port Type: Mouse Port

Handle 0x000C, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: USB
        Internal Connector Type: None
        External Reference Designator: USB 1
        External Connector Type: Access Bus (USB)
        Port Type: USB

Handle 0x000D, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: USB
        Internal Connector Type: None
        External Reference Designator: USB 2
        External Connector Type: Access Bus (USB)
        Port Type: USB

Handle 0x000E, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: USB
        Internal Connector Type: None
        External Reference Designator: USB 3
        External Connector Type: Access Bus (USB)
        Port Type: USB

Handle 0x000F, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: LAN
        Internal Connector Type: None
        External Reference Designator: Network
        External Connector Type: RJ-45
        Port Type: Network Port

Handle 0x0010, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J2H2
        Internal Connector Type: On Board IDE
        External Reference Designator: OnBoard Primary IDE
        External Connector Type: None
        Port Type: Other

Handle 0x0011, DMI type 8, 9 bytes
Port Connector Information
        Internal Reference Designator: J2H1
        Internal Connector Type: On Board IDE
        External Reference Designator: OnBoard Secondary IDE
        External Connector Type: None
        Port Type: Other

Handle 0x0012, DMI type 10, 6 bytes
On Board Device Information
        Type: Video
        Status: Enabled
        Description: Intel Video Graphics Controller

Handle 0x0013, DMI type 10, 6 bytes
On Board Device Information
        Type: Ethernet
        Status: Enabled
        Description: Broadcom Lan Controller

Handle 0x0014, DMI type 11, 6 bytes
OEM Strings
        String 1: EFI Software for Nettiling and Poyang

Handle 0x0015, DMI type 12, 5 bytes
System Configuration Options
        Option 1: J1D4:1-2,5-6,9-10Default;2-3CMOS clr,6-7Pswd clr,10-11Recovery

Handle 0x0016, DMI type 21, 7 bytes
Built-in Pointing Device
        Type: Touch Pad
        Interface: PS/2
        Buttons: 4

Handle 0x0017, DMI type 22, 26 bytes
Portable Battery
        Location: Internal Battery
        Manufacturer: Sony
        Serial Number: Not Supported
        Name: Li-ion(6cell)
        Chemistry: Lithium Ion
        Design Capacity: 51840 mWh
        Design Voltage: 10800 mV
        SBDS Version: Not Specified
        Maximum Error: Unknown
        SBDS Manufacture Date: 1980-00-00
        OEM-specific Information: 0xFFFFFFFF

Handle 0x0018, DMI type 16, 15 bytes
Physical Memory Array
        Location: System Board Or Motherboard
        Use: System Memory
        Error Correction Type: None
        Maximum Capacity: 4 GB
        Error Information Handle: Not Provided
        Number Of Devices: 2

Handle 0x0019, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0018
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 1024 MB
        Form Factor: DIMM
        Set: None
        Locator: DIMM0
        Bank Locator: BANK 0
        Type: DDR2
        Type Detail: Synchronous
        Speed: 667 MHz (1.5 ns)
        Manufacturer: 0xCE00000000000000
        Serial Number: 0xF623D285
        Asset Tag: Unknown
        Part Number: 0x4D342037305432393533455A332D43453620

Handle 0x001A, DMI type 6, 12 bytes
Memory Module Information
        Socket Designation: DIMM0
        Bank Connections: 0 0
        Current Speed: 1 ns
        Type: DIMM
        Installed Size: 1024 MB (Single-bank Connection)
        Enabled Size: 1024 MB (Single-bank Connection)
        Error Status: OK

Handle 0x001B, DMI type 20, 19 bytes
Memory Device Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x0003FFFFFFF
        Range Size: 1 GB
        Physical Device Handle: 0x0019
        Memory Array Mapped Address Handle: 0x001F
        Partition Row Position: 1
        Interleave Position: 1
        Interleaved Data Depth: 1

Handle 0x001C, DMI type 17, 27 bytes
Memory Device
        Array Handle: 0x0018
        Error Information Handle: Not Provided
        Total Width: 64 bits
        Data Width: 64 bits
        Size: 1024 MB
        Form Factor: DIMM
        Set: None
        Locator: DIMM2
        Bank Locator: BANK 2
        Type: DDR2
        Type Detail: Synchronous
        Speed: 667 MHz (1.5 ns)
        Manufacturer: 0xCE00000000000000
        Serial Number: 0xF623D286
        Asset Tag: Unknown
        Part Number: 0x4D342037305432393533455A332D43453620

Handle 0x001D, DMI type 6, 12 bytes
Memory Module Information
        Socket Designation: DIMM2
        Bank Connections: 0 0
        Current Speed: 1 ns
        Type: DIMM
        Installed Size: 1024 MB (Single-bank Connection)
        Enabled Size: 1024 MB (Single-bank Connection)
        Error Status: OK

Handle 0x001E, DMI type 20, 19 bytes
Memory Device Mapped Address
        Starting Address: 0x00040000000
        Ending Address: 0x0007FFFFFFF
        Range Size: 1 GB
        Physical Device Handle: 0x001C
        Memory Array Mapped Address Handle: 0x001F
        Partition Row Position: 2
        Interleave Position: 2
        Interleaved Data Depth: 1

Handle 0x001F, DMI type 19, 15 bytes
Memory Array Mapped Address
        Starting Address: 0x00000000000
        Ending Address: 0x0007FFFFFFF
        Range Size: 2 GB
        Physical Array Handle: 0x0018
        Partition Width: 0

Handle 0x0020, DMI type 4, 35 bytes
Processor Information
        Socket Designation: uPGA-478
        Type: Central Processor
        Family: Pentium M
        Manufacturer: Intel(R) Corporation
        ID: FA 06 00 00 FF FB EB BF
        Signature: Type 0, Family 6, Model 15, Stepping 10
        Flags:
                FPU (Floating-point unit on-chip)
                VME (Virtual mode extension)
                DE (Debugging extension)
                PSE (Page size extension)
                TSC (Time stamp counter)
                MSR (Model specific registers)
                PAE (Physical address extension)
                MCE (Machine check exception)
                CX8 (CMPXCHG8 instruction supported)
                APIC (On-chip APIC hardware supported)
                SEP (Fast system call)
                MTRR (Memory type range registers)
                PGE (Page global enable)
                MCA (Machine check architecture)
                CMOV (Conditional move instruction supported)
                PAT (Page attribute table)
                PSE-36 (36-bit page size extension)
                CLFSH (CLFLUSH instruction supported)
                DS (Debug store)
                ACPI (ACPI supported)
                MMX (MMX technology supported)
                FXSR (Fast floating-point save and restore)
                SSE (Streaming SIMD extensions)
                SSE2 (Streaming SIMD extensions 2)
                SS (Self-snoop)
                HTT (Hyper-threading technology)
                TM (Thermal monitor supported)
                PBE (Pending break enabled)
        Version: Intel(R) Core(TM)2 Duo CPU     T7300  @ 2.00GHz
        Voltage: 1.6 V
        External Clock: 200 MHz
        Max Speed: 2000 MHz
        Current Speed: 2000 MHz
        Status: Populated, Enabled
        Upgrade: Socket 478
        L1 Cache Handle: 0x0023
        L2 Cache Handle: 0x0021
        L3 Cache Handle: Not Provided
        Serial Number: NotSupport
        Asset Tag: FFFF
        Part Number: FFFF

Handle 0x0021, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L2 Cache
        Configuration: Enabled, Not Socketed, Level 2
        Operational Mode: Write Back
        Location: Internal
        Installed Size: 4096 KB
        Maximum Size: 4096 KB
        Supported SRAM Types:
                Asynchronous
        Installed SRAM Type: Asynchronous
        Speed: Unknown
        Error Correction Type: Single-bit ECC
        System Type: Data
        Associativity: Unknown

Handle 0x0022, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L1 Cache
        Configuration: Enabled, Not Socketed, Level 1
        Operational Mode: Write Back
        Location: Internal
        Installed Size: 32 KB
        Maximum Size: 32 KB
        Supported SRAM Types:
                Asynchronous
        Installed SRAM Type: Asynchronous
        Speed: Unknown
        Error Correction Type: Single-bit ECC
        System Type: Instruction
        Associativity: 8-way Set-associative

Handle 0x0023, DMI type 7, 19 bytes
Cache Information
        Socket Designation: L1 Cache
        Configuration: Enabled, Not Socketed, Level 1
        Operational Mode: Write Back
        Location: Internal
        Installed Size: 32 KB
        Maximum Size: 32 KB
        Supported SRAM Types:
                Asynchronous
        Installed SRAM Type: Asynchronous
        Speed: Unknown
        Error Correction Type: Single-bit ECC
        System Type: Data
        Associativity: 8-way Set-associative

Handle 0x0024, DMI type 127, 4 bytes
End Of Table


Tanks for your atention...
My english is very poor


    Para: [EMAIL PROTECTED]
      Cc: 
    Data: Mon, 18 Feb 2008 00:43:13 -0000
 Assunto: [Bug 192755] Re: Fan does not work on ubuntu 7.10

> Thanks for your bug report. If you could attach the following, it will
> help the developers track down you issue.
> 
> Output of 'uname -a'
> Output of 'sudo lspci -vvnn'
> Output of 'sudo dmidecode'
> 
> 
> ** Changed in: linux-source-2.6.22 (Ubuntu)
> Sourcepackagename: None => linux-source-2.6.22
> 
> -- 
> Fan does not work on ubuntu 7.10
> https://bugs.launchpad.net/bugs/192755
> You received this bug notification because you are a direct subscriber
> of the bug.
> 
> Status in Source Package "linux-source-2.6.22" in Ubuntu: New
> 
> Bug description:
> Hi
> 
> Fan does not work in laptop acer 5720-6124 runing Ubuntu 7.10, causing 
> overheat temperature and shutdown the machine.
>

-- 
Fan does not work on ubuntu 7.10
https://bugs.launchpad.net/bugs/192755
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to