My ralink rt2400 PCI card also works with wrong bandwidth (~52 kb/s instead of 132kb/s).
** Summary changed: - [hardy alpha4]rt2500 works, but slowly + [Hardy alpha 4] Wrong bandwidth with rt2400/rt2500 ** Description changed: - Binary package hint: linux-ubuntu-modules-2.6.24-5-generic + Binary package hint: linux-ubuntu-modules-2.6.24-8-generic I'm using hardy alpha 4 (on Linux nand-laptop 2.6.24-5-generic #1 SMP Thu Jan 24 19:45:21 UTC 2008 i686 GNU/Linux ) and I was testing a PCMCIA rt2500 card : 03:00.0 Network controller [0280]: RaLink RT2500 802.11g Cardbus/mini-PCI [1814:0201] (rev 01) with WEP encryption, near the AP : wlan0 IEEE 802.11g ESSID:"DartyBox_005c" Mode:Managed Frequency:2.462 GHz Access Point: 00:09:5B:EB:32:20 Bit Rate=1 Mb/s Tx-Power=27 dBm Retry min limit:7 RTS thr:off Fragment thr=2346 B Link Quality=43/100 Signal level=-54 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:0 Invalid misc:0 Missed beacon:0 The connection is working, but slowly (40 kb/s). It's due to the bit rate being set to 1Mb/s. If I manually set the rate to 54Mb/s, then I got the 900 kb/s I expect from my AP. I have also tested with one other RT based I have, a RT73 one, and the bit rate goes automatically to 54Mb/s... ** Changed in: linux-ubuntu-modules-2.6.24 (Ubuntu) Assignee: (unassigned) => Ubuntu Desktop Bugs (desktop-bugs) ** Changed in: linux-ubuntu-modules-2.6.24 (Ubuntu) Assignee: Ubuntu Desktop Bugs (desktop-bugs) => Ubuntu Kernel Team (ubuntu-kernel-team) -- [Hardy alpha 4] Wrong bandwidth with rt2400/rt2500 https://bugs.launchpad.net/bugs/190515 You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs