Running Hardy Alpha 5 with latest updates.
I am still seeing this bug or so I think...
Here is my setup : A laptop in its dock with an external monitor plugged on the
DVI port of the dock. The "native" resolution of my monitor is [EMAIL PROTECTED]
But in fact, I only get [EMAIL PROTECTED] (I can change it using the Gnome
RANDR applet for example).
Here is the output of xresprobe :
$ sudo xresprobe intel
id:
res: 1280x800
freq:
disptype: lcd/lvds
xresprobe doesn't seem to see the DVI monitor.
Here is the output of ddcprobe (seems fine) :
$ sudo ddcprobe
vbe: VESA 3.0 detected.
oem: Intel(r)GM965/PM965/GL960 Graphics Chip Accelerated VGA BIOS
vendor: Intel Corporation
product: Intel(r)GM965/PM965/GL960 Graphics Controller Hardware Version 0.0
memory: 7616kb
mode: 1280x1024x256
mode: 1280x1024x64k
mode: 1280x1024x16m
mode: 1024x768x256
mode: 1024x768x64k
mode: 1024x768x16m
mode: 640x480x16m
mode: 800x600x64k
mode: 800x600x16m
mode: 640x480x256
mode: 800x600x256
mode: 640x480x64k
edid:
edid: 1 3
id: 3514
eisa: AUO3514
serial: 00000000
manufacture: 1 2007
input: analog signal.
screensize: 26 16
gamma: 2.200000
dpms: RGB, no active off, no suspend, no standby
dtiming: [EMAIL PROTECTED]
monitorid: AUO
monitorid: B121EW03 V5
Here is my xorg.conf :
$ cat /etc/X11/xorg.conf
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "InputDevice"
Identifier "Generic Keyboard"
Driver "kbd"
Option "XkbRules" "xorg"
Option "XkbModel" "pc105"
Option "XkbLayout" "fr"
Option "XkbVariant" "oss"
EndSection
Section "InputDevice"
Identifier "Configured Mouse"
Driver "mouse"
EndSection
Section "Device"
Identifier "Configured Video Device"
EndSection
Section "Monitor"
Identifier "Configured Monitor"
EndSection
Section "Screen"
Identifier "Default Screen"
Monitor "Configured Monitor"
Device "Configured Video Device"
EndSection
Here is the ouput of xrandr -q :
$ xrandr -q
Screen 0: minimum 320 x 200, current 1280 x 864, maximum 1280 x 1280
VGA disconnected (normal left inverted right x axis y axis)
LVDS connected 1280x800+0+0 (normal left inverted right x axis y axis) 261mm x
163mm
1280x800 60.0*+ 60.0
1280x768 60.0
1024x768 60.0
800x600 60.3
640x480 59.9
TMDS-1 connected 1152x864+0+0 (normal left inverted right x axis y axis) 376mm
x 301mm
1280x1024 60.0 + 75.0 59.9
1152x864 74.8*
1024x768 75.1 71.9 70.1 60.0
832x624 74.6
800x600 72.2 75.0 60.3 56.2
640x480 75.0 72.8 66.7 60.0
720x400 70.1
TV connected (normal left inverted right x axis y axis)
1024x768 30.0
800x600 30.0
848x480 30.0
640x480 30.0
I have also attached my Xorg.0.log
PS : If the external monitor is plugged on the VGA port, it works like
expected.
** Attachment added: "Xorg.0.log"
http://launchpadlibrarian.net/12233817/Xorg.0.log
--
xresprobe drops highest available resolution on certain lcd's
https://bugs.launchpad.net/bugs/27667
You received this bug notification because you are a member of Ubuntu
Bugs, which is a direct subscriber.
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
