This bug was fixed in the package altos - 1.9.21-1 Sponsored for Nishit Majithia (0xnishit)
--------------- altos (1.9.21-1) unstable; urgency=medium [ Bdale Garbee ] * update Releasing with learnings from 1.9.20 release * fix confusing typo in 1.9.20 release notes * tweaking up the TeleBT turnon scripts for v4.0d * update ChangeLog for 1.9.21 release [ Keith Packard ] * altoslib: Handle pressure values which are too low (including negative) * altos: Adapt to picolibc 1.8.10 changes * Version 1.9.20.1 * altos: Check full name in rn4678 driver * doc: Add 1.9.21 release notes * Version 1.9.21 -- Bdale Garbee <[email protected]> Mon, 28 Apr 2025 20:41:01 -0600 altos (1.9.20-1) unstable; urgency=medium [ Keith Packard ] * Add a note about specs.inc to Releasing * doc: Add EasyMega v3 to doc/specs.inc * altoslib: Ignore content-length when fetching map tiles * map-server: Make sample map tile fetch script use valid zoom * altoslib: Add TeleGPS v4 bits * mpusb-3.0: Add cast to putchar call. Make compiler happy. * altosdroid: Reduce lint in java code * altosdroid: Remove spurious /> in an xml file * doc: Clean up some asciidoctor complaints * src: Add more includes to ao.h * Add built versions of altosdroid * altos: Add telegps v4.0 test firmware * telegps-v4.0-seeed: Use simpler failure indicators * altos: Add ao_radio_post (power-on self-test) for cc1200 * telegps-v4.0-seeed: Test CC1200 using ao_radio_post * altos: Add TeleMega v7.0 firmware and flash loader * altos/micropeak: Ignore another GCC warning * altos: Add telemega test for seeed * altos/telemega-v7.0-seeed: Report success with just the green LED * altos: Use smaller crt0 for stm boot loader * altos: Allow telebt test code to redefine how BT panics are handled * Add telebt v4.0 seeed test code * altos: Add Makefiles for telebt v4.0 seeed test code * altos: ignore the first few battery values in telebt-v4.0-seeed * altosuilib: Adapt to jfreechart 1.5.5 update * doc: Add micropeak outline doc * telemega-v7.0: Set ublox version to 10 * telemega-v7.0-seeed: Set ublox version * altos: Add 30V pyro log/telem options for telemega v7.0 * Add TeleMega v7.0 firmware and specs * Add 30v pyro voltage range support * doc: Add doc updates for version 1.9.20 * Version 1.9.20 [ Bdale Garbee ] * add support for TeleGPS v4.0 * add production flash/cal/test script for TeleLCO v3.0 * include TeleLCO v3.0 firmware in Releasing file * altos: move Java minimum supported version from 7 to 8 * altosui: handle another jfreechart 1.5.5 api change * add TeleMega v7 to firmware copied in Releasing * add production support for TeleMega v7.0 * add production test support for TeleGPS v4.0 * update ChangeLog for 1.9.20 release -- Bdale Garbee <[email protected]> Mon, 24 Mar 2025 13:11:32 -0600 altos (1.9.19-4) unstable; urgency=medium * cherry-pick patch from master branch that updates libjfreechart usage to reflect changes in version 1.5.5, closes: #1099215 -- Bdale Garbee <[email protected]> Mon, 03 Mar 2025 11:17:25 -0700 altos (1.9.19-3) unstable; urgency=medium * cherry-pick patch from master branch that moves to smaller crt0 to resolve newer compiler overflowing bootloader flash, closes: #1095326 -- Bdale Garbee <[email protected]> Fri, 21 Feb 2025 03:01:09 -0700 altos (1.9.19-2) unstable; urgency=medium * cherry-pick patch from master branch that fixes FTBFS due to needing another include, closes: #1082677 -- Bdale Garbee <[email protected]> Thu, 26 Sep 2024 11:08:46 -0600 altos (1.9.19-1) unstable; urgency=medium [ Bdale Garbee ] * capture things learned during 1.9.18 release * remove garbage line from easymotor turnon script * first cut at turnon scripts for EasyTimer v2 * doc: add Terry Lee's TRA and NAR numbers to TeleLaunch doc * doc: clarify how EasyMotor gets put into idle mode * docs: correct EasyMotor v3.0 battery in specs table * doc: EasyTimer v2.0 also has mag sensor * doc: reflect move of mailing list from lists.gag.com to groups.io * include EasyMega v3 firmware in that captured in LLC repo during release * make EasyMini v2.1 our "current" thing to flash/cal/test * production bench scripts for EasyMega v3 * capture link for EasyMini production scripts * update ChangeLog for 1.9.19 release [ Keith Packard ] * altos/easymini-v2.0: Remove combined .dfu file * altos/test: Get the flight software test code working again * altosui: Add config and pyro tabs to graph widget * altos/easymega-v3.0: Add combined dfu and ihx targets * src/telelco-v3.0: Increase LED test time to 1 second * altos/telelco-v3.0: Delete debug code * altos/telelco-v3.0: Add "Scanning..." to startup screen * altos/telelco-v3.0: Display good vs bad packets received * altos/telelco-v3.0: Swap version and serial on info page * altos/telelco-v3.0: Merge info into one screen * telelco-v3.0: Support ambient light sensor * altosui: Don't add pyro table to graph UI when npyro == MISSING * altoslib: Check for negative tick wrap when importing flight records * ao-bringup: Re-add cal-freq * src: Open up the ADXL375 self test range * ao-accel-cal: Validate ADXL375 sensitivity * doc: Version 1.9.19 release notes * Add easymega v3.0 firmware to fat images * Version 1.9.19 -- Bdale Garbee <[email protected]> Mon, 05 Aug 2024 10:40:21 -0600 altos (1.9.18-1) unstable; urgency=medium [ Bdale Garbee ] * doc: fix a typo in the staging example * update Releasing with learnings from 1.9.17 release * set java-version=8 in rules to enable openjdk 21 support, closes: #1052587 * add a paragraph about how to hook up a pressure sensor to an EasyMotor * kernel: conditionalize config "report in feet" on presence of baro sensor * fix product name * update ChangeLog for 1.9.18 release [ Keith Packard ] * doc: Use -optimize with asciidoctorpdf * micropeak: Include firmware in install bits * fixup seven segment debug code * altos: Use BMI088 as z-axis accel as needed * altos: Initial easytimer-v2 bits * altos: Build easytimer-v2 bits * altos/easytimer-v2: Add logging bits * altos/easytimer-v2: Update comments in flash loader ao_pins.h * altos/samd21: Enable stdio for USB by default * altos: Updating pyro format tried to copy entries with no value * altos/easytimer-v2: Initialize logging too * Fix configure tests for multi-arch libaltos * altos/lpc: Adjust ADC clock from 450kHz to 4.5MHz * ao-tools: Add flash utility for stm32f1x chips * altos: Start work on stm32f1 support * altos/stm32f1: More stm32f103 work * altos/stm32f103-nucleo: Use more bits * altos/stm32f1: Start work on self-flash code * stm32f1: Get boot loader working * altos/stm32f103-nucleo: Add boot loader * altos: Add ST7565 LCD driver * src/draw: Provide some useful constants * altos/draw: Build demos with -O3 to catch more bugs * altos/draw: Skip line adjustment for vertical/horizontal * altos/draw: Have each font declare ao_glyph_temp as .comm * altos/driver: Document setting for AO_ST7565_BIAS * altos/stm32f1: Add DMA and SPI drivers * altos/stm32f103-nucleo: Drive a screen too * altos/stm32f103-nucleo: Draw more of the LCO demo screen * altos: Clean up st7565 LCD driver * altos: Fix up stm32f103-nucleo 'lco' demo mode * altos/stm32f1: Add more IP block drivers * drivers: Add real i2c support to mmc5983 * altos/easymega-v3.0: Switch to STM32F103 * altos/telelco-v3: Create initial flash loader setup * altos/telelco-v3: Move USB pullup from PA9 to PA10 * altos/stm32f1: Add ao_fast_timer.c * altos: Build in 'draw' directory first * altos: Add initial TeleLCO-v3 bits * altos/stm32f1: Add eeprom emulation using flash * altos/telelco-v3.0: Use eeprom emulation for config storage * altos/telelco-v3.0: Add some real drawing stuff * altos: Move ao_adc_single.h API header to kernel/ * altos/stm32f1: Add ao_adc_single support * altos/telelco-v3.0: Add ao_adc_single usage to get battery voltage * altos/telelco-v3.0: Fix up search UI * altos/telelco*: Make LCO voltage display work on 2.0 and 3.0 * altos/stm32f1: Support beeper on tim3 * altos/stm32f1: Set PLLXTPRE value * altos/stm32f1: Add STM_RCC_CFGR_PLLXTPRE_MASK value * altos/telelco-v3.0: Add USB pull up * altos/stm32f1: Turn on ADC during initialization sequence * altos/stm32f1: Poke the ADC harder to get it to sample * altos/stm32f1: Allow PA6 to be left alone in the SPI code * altos/telelco-v3.0: Don't connect PA6 to SPI * altos/telelco-v3.0: Battery voltage is on PA2 * altos/stm32f1: Support timers 2,3,4 for fast timer * altos/telelco-v3.0: Use timer 2 for fast timer * src/stm32f1: Disable extra JTAG pins in ao_clock_init * switch to mode 3 for LCD * stm32f1: make spi speed per-bus * altos: Add SPI bus parameter to ao_spi_speed * altos: Add wiring docs to st-7565 header * altos: Fix pretend pad range for TeleLCO * telelco-v3.0: Minor setup fixes * altos: Build TeleLCO v3.0 bits by default * altos/telelco-v3.0: Add contrast setting * altos: Bump ST7565 speed to 20MHz * altos/telelco-v3.0: Configure SPI GPIO pins to 50MHz * altos/stm32f1: For some reason the DBG registers aren't always available * altos: Add support for backlight control in ao_lco_bits * altos/telelco-v3.0: Control LCD backlight with PWM * telelco-v3.0: Add info page * altos/telelco-v3: Add logo to 'info' page * altos/draw: Add ao_text_width * altos/telelco: Update backlight/contrast display upon change * altos/st7565: Diff image during update * altos/telelco-v3.0: Show backlight/contrast value as percent * altos/stm32f1: Set beeper pin to 0 while off * altos/telelco: Add per-box RSSI display screen * altos/telelco: Add RSSI display to older devices * altos/st7565: Set default contrast to 13 * altos/telelco-v3: Minor UI tweaks * altos/easytimer-v2: Fix up ao_pins.h * altoslib: Add EasyTimer-v2 support * altos/easytimer-v2: Set default log size to 192kB * altos/easytimer-v2: Fix product name * altosui: Make accel cal dialog say 'beeper' instead of 'antenna' * stm32f1: Clean up some ADC definitions * src/easymini-2.0: Add combined .dfu file for Seeed testing * altoslib: Add EasyMega v3.0 support * altos/stm32f103: Fix continuous ADC code * altos: Build EasyMega v3.0 by defaul * altos/easymega-v3.0: Update i2c pin usage * altos/stm32f1: Grab both TX/RX DMA mutexes while doing I2C * altos/easytimer-v2: Generate combined .ihx file for seeed testing * altos: ao_fec_prepare using wrong value for input len * altos/test: Adjust CRC error rate after FEC fix * altos/test: Add FEC test for simple 'hello' message * altosui: Set the beeper to 0 to disable * altosui: Support gps receiver setting * Add EasyTimer v2 firmware * doc: Add 1.9.18 release notes * Version 1.9.18 * Fix up fat build target * altos/draw: Add 'install' target * doc: Add 1.9.18 release notes * Version 1.9.18 -- Bdale Garbee <[email protected]> Sun, 28 Apr 2024 19:45:15 -0600 ** Changed in: altos (Ubuntu) Status: New => Fix Released -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/2120293 Title: Sync altos from Debian unstable for questing To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/altos/+bug/2120293/+subscriptions -- ubuntu-bugs mailing list [email protected] https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
