Public bug reported:
when booting UC20 on a Pi4 the screen backlight is completely off and no
signal is produced.
inspecting the boot a little closer it seems the necessary modules for
bringing up the vc4 framebuffer are not included in the initramfs on
ubuntu core. once they get loaded (after boot) the backlight and signal
turn on. The initrd should include the modules and load them during
boot.
this is also required to bring any kind of bootsplash back to UC20 which
is a reason all our digital signage customers currently hold back on
going forward to UC20.
the modules required are:
ogra@ubuntu:~$ lsmod|grep vc4
vc4 290816 3
drm_kms_helper 225280 3 vc4
snd_soc_core 262144 1 vc4
snd_pcm 143360 5 vc4,snd_bcm2835,snd_soc_core,snd_pcm_dmaengine
drm 565248 7 gpu_sched,drm_kms_helper,v3d,vc4
the loading during boot in the journal is shown below:
ogra@ubuntu:~$ sudo journalctl -b | grep vc4
Apr 01 17:23:45 ubuntu kernel: vc4-drm gpu: bound fe600000.firmwarekms (ops
vc4_fkms_ops [vc4])
Apr 01 17:23:45 ubuntu kernel: fb0: switching to vc4drmfb from simple
Apr 01 17:23:45 ubuntu kernel: [drm] Initialized vc4 0.0.0 20140616 for gpu on
minor 1
Apr 01 17:23:45 ubuntu kernel: vc4-drm gpu: fb0: vc4drmfb frame buffer device
** Affects: linux-raspi (Ubuntu)
Importance: Undecided
Status: Confirmed
** Affects: linux-raspi (Ubuntu Focal)
Importance: Undecided
Status: New
** Affects: linux-raspi (Ubuntu Groovy)
Importance: Undecided
Status: New
** Affects: linux-raspi (Ubuntu Hirsute)
Importance: Undecided
Status: Confirmed
** Description changed:
when booting UC20 on a Pi4 the screen backlight is completely off and no
signal is produced.
inspecting the boot a little closer it seems the necessary modules for
bringing up the vc4 framebuffer are not included in the initramfs on
ubuntu core. once they get loaded (after boot) the backlight and signal
turn on. The initrd should include the modules and load them during
boot.
- this is also required to bring any kind of bootsplash back to UC20 with
+ this is also required to bring any kind of bootsplash back to UC20 which
is a reason all our digital signage customers currently hold back on
going forward to UC20.
the modules required are:
ogra@ubuntu:~$ lsmod|grep vc4
vc4 290816 3
drm_kms_helper 225280 3 vc4
snd_soc_core 262144 1 vc4
snd_pcm 143360 5 vc4,snd_bcm2835,snd_soc_core,snd_pcm_dmaengine
drm 565248 7 gpu_sched,drm_kms_helper,v3d,vc4
the loading during boot in the journal is shown below:
ogra@ubuntu:~$ sudo journalctl -b | grep vc4
Apr 01 17:23:45 ubuntu kernel: vc4-drm gpu: bound fe600000.firmwarekms (ops
vc4_fkms_ops [vc4])
Apr 01 17:23:45 ubuntu kernel: fb0: switching to vc4drmfb from simple
Apr 01 17:23:45 ubuntu kernel: [drm] Initialized vc4 0.0.0 20140616 for gpu
on minor 1
Apr 01 17:23:45 ubuntu kernel: vc4-drm gpu: fb0: vc4drmfb frame buffer device
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1914608
Title:
no console during boot on UC20
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux-raspi/+bug/1914608/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
