These are my dmesg and alsa-base.conf
dmesg:
[ 0.000000] microcode: microcode updated early to revision 0x38, date = 2019-
01-15
[ 0.000000] Linux version 5.3.0-46-generic (buildd@lgw01-amd64-003) (gcc vers
ion 9.2.1 20191008 (Ubuntu 9.2.1-9ubuntu2)) #38-Ubuntu SMP Fri Mar 27 17:37:05 U
TC 2020 (Ubuntu 5.3.0-46.38-generic 5.3.18)
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic root=UUID
=6648ead1-09e3-461e-a036-5cb58e11ab8b ro quiet splash vt.handoff=7
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] zhaoxin Shanghai
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point regi
sters'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x008: 'MPX bounds registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x010: 'MPX CSR'
[ 0.000000] x86/fpu: xstate_offset[3]: 576, xstate_sizes[3]: 64
[ 0.000000] x86/fpu: xstate_offset[4]: 640, xstate_sizes[4]: 64
[ 0.000000] x86/fpu: Enabled xstate features 0x1b, context size is 704 bytes,
using 'compacted' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000000fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000010000000-0x0000000012150fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000012151000-0x0000000067b4ffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067b50000-0x0000000067b50fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000067b51000-0x0000000067b6afff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000067b6b000-0x0000000067ba6fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000067ba7000-0x0000000068ba6fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x0000000068ba7000-0x000000007822efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007822f000-0x000000007aebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x000000007aebf000-0x000000007afbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x000000007afbf000-0x000000007affefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x000000007afff000-0x000000007affffff] usable
[ 0.000000] BIOS-e820: [mem 0x000000007b000000-0x000000007fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000d0000000-0x00000000d0ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe042000-0x00000000fe044fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fe900000-0x00000000fe902fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000017fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 3.0 present.
[ 0.000000] DMI: LENOVO 80XR/LNVNB161216, BIOS 5RCN30WW 10/23/2017
[ 0.000000] tsc: Detected 1094.400 MHz processor
[ 0.005258] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.005263] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.005284] last_pfn = 0x180000 max_arch_pfn = 0x400000000
[ 0.005292] MTRR default type: uncachable
[ 0.005294] MTRR fixed ranges enabled:
[ 0.005298] 00000-9FFFF write-back
[ 0.005300] A0000-BFFFF uncachable
[ 0.005303] C0000-FFFFF write-protect
[ 0.005305] MTRR variable ranges enabled:
[ 0.005309] 0 base 0000000000 mask 7F80000000 write-back
[ 0.005312] 1 base 007C000000 mask 7FFC000000 uncachable
[ 0.005315] 2 base 007B000000 mask 7FFF000000 uncachable
[ 0.005318] 3 base 0100000000 mask 7F80000000 write-back
[ 0.005321] 4 base 00FFC00000 mask 70FFC00000 write-combining
[ 0.005323] 5 disabled
[ 0.005325] 6 disabled
[ 0.005326] 7 disabled
[ 0.005328] 8 disabled
[ 0.005329] 9 disabled
[ 0.005441] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
[ 0.005538] last_pfn = 0x7b000 max_arch_pfn = 0x400000000
[ 0.015545] check: Scanning 1 areas for low memory corruption
[ 0.015556] Using GB pages for direct mapping
[ 0.015562] BRK [0x140e01000, 0x140e01fff] PGTABLE
[ 0.015567] BRK [0x140e02000, 0x140e02fff] PGTABLE
[ 0.015570] BRK [0x140e03000, 0x140e03fff] PGTABLE
[ 0.015694] BRK [0x140e04000, 0x140e04fff] PGTABLE
[ 0.015997] BRK [0x140e05000, 0x140e05fff] PGTABLE
[ 0.016094] BRK [0x140e06000, 0x140e06fff] PGTABLE
[ 0.016196] BRK [0x140e07000, 0x140e07fff] PGTABLE
[ 0.016476] BRK [0x140e08000, 0x140e08fff] PGTABLE
[ 0.016629] BRK [0x140e09000, 0x140e09fff] PGTABLE
[ 0.016872] BRK [0x140e0a000, 0x140e0afff] PGTABLE
[ 0.017007] RAMDISK: [mem 0x32493000-0x35240fff]
[ 0.017031] ACPI: Early table checksum verification disabled
[ 0.017040] ACPI: RSDP 0x00000000000FE020 000024 (v02 LENOVO)
[ 0.017049] ACPI: XSDT 0x000000007AFDF188 0000CC (v01 LENOVO CB-01 0000000
1 01000013)
[ 0.017063] ACPI: FACP 0x000000007AFF6000 000114 (v06 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017077] ACPI: DSDT 0x000000007AFE9000 007E78 (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017086] ACPI: FACS 0x000000007AFB0000 000040
[ 0.017093] ACPI: FACS 0x000000007AFB0000 000040
[ 0.017099] ACPI: UEFI 0x000000007AFFD000 000236 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017108] ACPI: POAT 0x000000007AFFC000 000055 (v03 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017116] ACPI: BDAT 0x000000007AFFB000 000030 (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017124] ACPI: UEFI 0x000000007AFFA000 000042 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017132] ACPI: DBG2 0x000000007AFF9000 000072 (v00 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017140] ACPI: DBGP 0x000000007AFF8000 000034 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017148] ACPI: HPET 0x000000007AFF5000 000038 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017156] ACPI: LPIT 0x000000007AFF4000 00005C (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017164] ACPI: APIC 0x000000007AFF3000 000084 (v03 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017172] ACPI: MCFG 0x000000007AFF2000 00003C (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017180] ACPI: NPKT 0x000000007AFF1000 000065 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017188] ACPI: SSDT 0x000000007AFE8000 0002AF (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017196] ACPI: SSDT 0x000000007AFE7000 0003DF (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017204] ACPI: SSDT 0x000000007AFE6000 00072B (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017212] ACPI: SSDT 0x000000007AFE5000 00032D (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017220] ACPI: SSDT 0x000000007AFE4000 00017C (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017228] ACPI: SSDT 0x000000007AFE1000 002701 (v02 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017236] ACPI: FPDT 0x000000007AFE0000 000034 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017245] ACPI: WDAT 0x000000007AFF7000 000104 (v01 LENOVO CB-01 0000000
1 ACPI 00040000)
[ 0.017252] ACPI: NHLT 0x000000007AFDE000 00002D (v00 LENOVO CB-01 0000000
1 01000013)
[ 0.017274] ACPI: Local APIC address 0xfee00000
[ 0.017585] No NUMA configuration found
[ 0.017589] Faking a node at [mem 0x0000000000000000-0x000000017fffffff]
[ 0.017617] NODE_DATA(0) allocated [mem 0x17ffd5000-0x17fffffff]
[ 0.018441] Zone ranges:
[ 0.018443] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018447] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.018450] Normal [mem 0x0000000100000000-0x000000017fffffff]
[ 0.018453] Device empty
[ 0.018455] Movable zone start for each node
[ 0.018463] Early memory node ranges
[ 0.018466] node 0: [mem 0x0000000000001000-0x000000000009dfff]
[ 0.018468] node 0: [mem 0x0000000000100000-0x000000000fffffff]
[ 0.018471] node 0: [mem 0x0000000012151000-0x0000000067b4ffff]
[ 0.018473] node 0: [mem 0x0000000067b6b000-0x0000000067ba6fff]
[ 0.018475] node 0: [mem 0x0000000068ba7000-0x000000007822efff]
[ 0.018477] node 0: [mem 0x000000007afff000-0x000000007affffff]
[ 0.018480] node 0: [mem 0x0000000100000000-0x000000017fffffff]
[ 0.019567] Zeroed struct page in unavailable ranges: 44959 pages
[ 0.019571] Initmem setup node 0 [mem 0x0000000000001000-0x000000017fffffff]
[ 0.019576] On node 0 totalpages: 1003617
[ 0.019579] DMA zone: 64 pages used for memmap
[ 0.019581] DMA zone: 21 pages reserved
[ 0.019584] DMA zone: 3997 pages, LIFO batch:0
[ 0.019763] DMA32 zone: 7428 pages used for memmap
[ 0.019765] DMA32 zone: 475332 pages, LIFO batch:63
[ 0.050800] Normal zone: 8192 pages used for memmap
[ 0.050803] Normal zone: 524288 pages, LIFO batch:63
[ 0.073093] Reserving Intel graphics memory at [mem 0x7c000000-0x7fffffff]
[ 0.073381] ACPI: PM-Timer IO Port: 0x408
[ 0.073386] ACPI: Local APIC address 0xfee00000
[ 0.073403] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
[ 0.073406] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
[ 0.073408] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
[ 0.073410] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
[ 0.073448] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-119
[ 0.073454] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.073458] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
[ 0.073461] ACPI: IRQ0 used by override.
[ 0.073464] ACPI: IRQ9 used by override.
[ 0.073468] Using ACPI (MADT) for SMP configuration information
[ 0.073472] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.073484] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
[ 0.073553] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.073558] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
[ 0.073560] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.073562] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[ 0.073564] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[ 0.073569] PM: Registered nosave memory: [mem 0x10000000-0x12150fff]
[ 0.073574] PM: Registered nosave memory: [mem 0x67b50000-0x67b50fff]
[ 0.073576] PM: Registered nosave memory: [mem 0x67b51000-0x67b6afff]
[ 0.073581] PM: Registered nosave memory: [mem 0x67ba7000-0x68ba6fff]
[ 0.073586] PM: Registered nosave memory: [mem 0x7822f000-0x7aebefff]
[ 0.073588] PM: Registered nosave memory: [mem 0x7aebf000-0x7afbefff]
[ 0.073589] PM: Registered nosave memory: [mem 0x7afbf000-0x7affefff]
[ 0.073595] PM: Registered nosave memory: [mem 0x7b000000-0x7fffffff]
[ 0.073596] PM: Registered nosave memory: [mem 0x80000000-0xcfffffff]
[ 0.073598] PM: Registered nosave memory: [mem 0xd0000000-0xd0ffffff]
[ 0.073600] PM: Registered nosave memory: [mem 0xd1000000-0xdfffffff]
[ 0.073602] PM: Registered nosave memory: [mem 0xe0000000-0xe3ffffff]
[ 0.073604] PM: Registered nosave memory: [mem 0xe4000000-0xfe041fff]
[ 0.073606] PM: Registered nosave memory: [mem 0xfe042000-0xfe044fff]
[ 0.073607] PM: Registered nosave memory: [mem 0xfe045000-0xfe8fffff]
[ 0.073609] PM: Registered nosave memory: [mem 0xfe900000-0xfe902fff]
[ 0.073611] PM: Registered nosave memory: [mem 0xfe903000-0xfebfffff]
[ 0.073613] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.073615] PM: Registered nosave memory: [mem 0xfec01000-0xfed00fff]
[ 0.073617] PM: Registered nosave memory: [mem 0xfed01000-0xfed01fff]
[ 0.073618] PM: Registered nosave memory: [mem 0xfed02000-0xfedfffff]
[ 0.073620] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.073622] PM: Registered nosave memory: [mem 0xfee01000-0xff7fffff]
[ 0.073624] PM: Registered nosave memory: [mem 0xff800000-0xffffffff]
[ 0.073629] [mem 0x80000000-0xcfffffff] available for PCI devices
[ 0.073631] Booting paravirtualized kernel on bare hardware
[ 0.073639] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffff
ffff, max_idle_ns: 7645519600211568 ns
[ 0.073658] setup_percpu: NR_CPUS:8192 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node
_ids:1
[ 0.074505] percpu: Embedded 54 pages/cpu s184320 r8192 d28672 u524288
[ 0.074531] pcpu-alloc: s184320 r8192 d28672 u524288 alloc=1*2097152
[ 0.074533] pcpu-alloc: [0] 0 1 2 3
[ 0.074632] Built 1 zonelists, mobility grouping on. Total pages: 987912
[ 0.074635] Policy zone: Normal
[ 0.074639] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-5.3.0-46-generic ro
ot=UUID=6648ead1-09e3-461e-a036-5cb58e11ab8b ro quiet splash vt.handoff=7
[ 0.075950] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes
, linear)
[ 0.076536] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes,
linear)
[ 0.076639] mem auto-init: stack:off, heap alloc:on, heap free:off
[ 0.095529] Calgary: detecting Calgary via BIOS EBDA area
[ 0.095533] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.126585] Memory: 3795900K/4014468K available (14339K kernel code, 2387K rw
data, 4724K rodata, 2676K init, 5044K bss, 218568K reserved, 0K cma-reserved)
[ 0.127147] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.127186] ftrace: allocating 43582 entries in 171 pages
[ 0.167009] rcu: Hierarchical RCU implementation.
[ 0.167014] rcu: RCU restricting CPUs from NR_CPUS=8192 to nr_cpu_ids=4.
[ 0.167016] Tasks RCU enabled.
[ 0.167019] rcu: RCU calculated value of scheduler-enlistment delay is 25 jif
fies.
[ 0.167021] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
[ 0.177464] NR_IRQS: 524544, nr_irqs: 1024, preallocated irqs: 16
[ 0.178089] random: crng done (trusting CPU's manufacturer)
[ 0.178168] vt handoff: transparent VT on vt#7
[ 0.178192] Console: colour dummy device 80x25
[ 0.178202] printk: console [tty0] enabled
[ 0.178258] ACPI: Core revision 20190703
[ 0.178754] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_i
dle_ns: 99544814920 ns
[ 0.178857] APIC: Switch to symmetric I/O mode setup
[ 0.180173] x2apic: IRQ remapping doesn't support X2APIC mode
[ 0.185052] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.202820] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0xfc
66f4fc7c, max_idle_ns: 440795224246 ns
[ 0.202832] Calibrating delay loop (skipped), value calculated using timer fr
equency.. 2188.80 BogoMIPS (lpj=4377600)
[ 0.202838] pid_max: default: 32768 minimum: 301
[ 0.202978] LSM: Security Framework initializing
[ 0.203015] Yama: becoming mindful.
[ 0.203103] AppArmor: AppArmor initialized
[ 0.203228] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes, line
ar)
[ 0.203249] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes,
linear)
[ 0.203735] *** VALIDATE proc ***
[ 0.203894] *** VALIDATE cgroup1 ***
[ 0.203898] *** VALIDATE cgroup2 ***
[ 0.204087] mce: CPU0: Thermal monitoring enabled (TM1)
[ 0.204181] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
[ 0.204183] Last level dTLB entries: 4KB 0, 2MB 0, 4MB 0, 1GB 0
[ 0.204194] Spectre V1 : Mitigation: usercopy/swapgs barriers and __user poin
ter sanitization
[ 0.204198] Spectre V2 : Mitigation: Full generic retpoline
[ 0.204200] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on c
ontext switch
[ 0.204201] Spectre V2 : Enabling Restricted Speculation for firmware calls
[ 0.204205] Spectre V2 : mitigation: Enabling conditional Indirect Branch Pre
diction Barrier
[ 0.204716] Freeing SMP alternatives memory: 36K
[ 0.209949] TSC deadline timer enabled
[ 0.209960] smpboot: CPU0: Intel(R) Celeron(R) CPU N3350 @ 1.10GHz (family: 0
x6, model: 0x5c, stepping: 0x9)
[ 0.210429] Performance Events: PEBS fmt3+, Goldmont events, 32-deep LBR, ful
l-width counters, Intel PMU driver.
[ 0.210444] ... version: 4
[ 0.210445] ... bit width: 48
[ 0.210447] ... generic registers: 4
[ 0.210449] ... value mask: 0000ffffffffffff
[ 0.210450] ... max period: 00007fffffffffff
[ 0.210452] ... fixed-purpose events: 3
[ 0.210453] ... event mask: 000000070000000f
[ 0.210567] rcu: Hierarchical SRCU implementation.
[ 0.210825] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.210825] smp: Bringing up secondary CPUs ...
[ 0.210825] x86: Booting SMP configuration:
[ 0.210825] .... node #0, CPUs: #1
[ 0.215191] smp: Brought up 1 node, 2 CPUs
[ 0.215191] smpboot: Max logical packages: 2
[ 0.215191] smpboot: Total of 2 processors activated (4377.60 BogoMIPS)
[ 0.215601] devtmpfs: initialized
[ 0.215601] x86/mm: Memory block size: 128MB
[ 0.216458] PM: Registering ACPI NVS region [mem 0x67b50000-0x67b50fff] (4096
bytes)
[ 0.216458] PM: Registering ACPI NVS region [mem 0x67ba7000-0x68ba6fff] (1677
7216 bytes)
[ 0.218975] PM: Registering ACPI NVS region [mem 0x7aebf000-0x7afbefff] (1048
576 bytes)
[ 0.219217] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, ma
x_idle_ns: 7645041785100000 ns
[ 0.219217] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.219217] pinctrl core: initialized pinctrl subsystem
[ 0.219436] PM: RTC time: 15:36:52, date: 2020-04-21
[ 0.219880] NET: Registered protocol family 16
[ 0.220150] audit: initializing netlink subsys (disabled)
[ 0.220231] audit: type=2000 audit(1587483412.040:1): state=initialized audit
_enabled=0 res=1
[ 0.220231] EISA bus registered
[ 0.220231] cpuidle: using governor ladder
[ 0.220231] cpuidle: using governor menu
[ 0.220231] ACPI: bus type PCI registered
[ 0.220231] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.220231] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3
ffffff] (base 0xe0000000)
[ 0.220231] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
[ 0.220231] PCI: Using configuration type 1 for base access
[ 0.220231] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.220231] mtrr: probably your BIOS does not setup all CPUs.
[ 0.220231] mtrr: corrected configuration.
[ 0.226087] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[ 0.226087] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.235115] ACPI: Added _OSI(Module Device)
[ 0.235118] ACPI: Added _OSI(Processor Device)
[ 0.235120] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.235122] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.235125] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.235127] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.235130] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.260867] ACPI: 7 ACPI AML tables successfully acquired and loaded
[ 0.268563] ACPI: Dynamic OEM Table Load:
[ 0.268582] ACPI: SSDT 0xFFFF8F637A8B9000 000102 (v02 PmRef Cpu0Cst 0000300
1 INTL 20121220)
[ 0.271755] ACPI: Dynamic OEM Table Load:
[ 0.271771] ACPI: SSDT 0xFFFF8F637A8B9200 00015F (v02 PmRef ApIst 0000300
0 INTL 20121220)
[ 0.274130] ACPI: Dynamic OEM Table Load:
[ 0.274145] ACPI: SSDT 0xFFFF8F637B325E40 00008D (v02 PmRef ApCst 0000300
0 INTL 20121220)
[ 0.277091] ACPI: EC: EC started
[ 0.277094] ACPI: EC: interrupt blocked
[ 0.280558] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.280563] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=
0x62
[ 0.280567] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transacti
ons
[ 0.280568] ACPI: Interpreter enabled
[ 0.280641] ACPI: (supports S0 S3 S4 S5)
[ 0.280644] ACPI: Using IOAPIC for interrupt routing
[ 0.280749] PCI: Using host bridge windows from ACPI; if necessary, use "pci=
nocrs" and report a bug
[ 0.281724] ACPI: Enabled 9 GPEs in block 00 to 7F
[ 0.309935] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.309952] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM S
egments MSI HPX-Type3]
[ 0.313160] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug SHPCHotplug P
ME AER PCIeCapability LTR]
[ 0.313203] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 0
0-3f] only partially covers this bridge
[ 0.315754] PCI host bridge to bus 0000:00
[ 0.315760] pci_bus 0000:00: root bus resource [io 0x0070-0x0077]
[ 0.315770] pci_bus 0000:00: root bus resource [io 0x0000-0x006f window]
[ 0.315773] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7 window]
[ 0.315777] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.315781] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff win
dow]
[ 0.315784] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff win
dow]
[ 0.315787] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff win
dow]
[ 0.315791] pci_bus 0000:00: root bus resource [mem 0x7c000001-0x7fffffff win
dow]
[ 0.315794] pci_bus 0000:00: root bus resource [mem 0x7b800001-0x7bffffff win
dow]
[ 0.315798] pci_bus 0000:00: root bus resource [mem 0x80000000-0xcfffffff win
dow]
[ 0.315801] pci_bus 0000:00: root bus resource [mem 0xe0000000-0xefffffff win
dow]
[ 0.315806] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.315836] pci 0000:00:00.0: [8086:5af0] type 00 class 0x060000
[ 0.316741] pci 0000:00:02.0: [8086:5a85] type 00 class 0x030000
[ 0.316770] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x90ffffff 64bit]
[ 0.316784] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff 64bit pref
]
[ 0.316795] pci 0000:00:02.0: reg 0x20: [io 0x3000-0x303f]
[ 0.317742] pci 0000:00:0e.0: [8086:5a98] type 00 class 0x040380
[ 0.317786] pci 0000:00:0e.0: reg 0x10: [mem 0x91410000-0x91413fff 64bit]
[ 0.317831] pci 0000:00:0e.0: reg 0x20: [mem 0x91100000-0x911fffff 64bit]
[ 0.317937] pci 0000:00:0e.0: PME# supported from D0 D3hot D3cold
[ 0.318858] pci 0000:00:0f.0: [8086:5a9a] type 00 class 0x078000
[ 0.318912] pci 0000:00:0f.0: reg 0x10: [mem 0x91416000-0x91416fff 64bit]
[ 0.319073] pci 0000:00:0f.0: PME# supported from D3hot
[ 0.319840] pci 0000:00:0f.1: [8086:5a9c] type 00 class 0x078000
[ 0.319894] pci 0000:00:0f.1: reg 0x10: [mem 0x91417000-0x91417fff 64bit]
[ 0.320052] pci 0000:00:0f.1: PME# supported from D3hot
[ 0.320819] pci 0000:00:0f.2: [8086:5a9e] type 00 class 0x078000
[ 0.320873] pci 0000:00:0f.2: reg 0x10: [mem 0x91418000-0x91418fff 64bit]
[ 0.321033] pci 0000:00:0f.2: PME# supported from D3hot
[ 0.321814] pci 0000:00:12.0: [8086:5ae3] type 00 class 0x010601
[ 0.321845] pci 0000:00:12.0: reg 0x10: [mem 0x91414000-0x91415fff]
[ 0.321857] pci 0000:00:12.0: reg 0x14: [mem 0x9141d000-0x9141d0ff]
[ 0.321870] pci 0000:00:12.0: reg 0x18: [io 0x3080-0x3087]
[ 0.321882] pci 0000:00:12.0: reg 0x1c: [io 0x3088-0x308b]
[ 0.321894] pci 0000:00:12.0: reg 0x20: [io 0x3060-0x307f]
[ 0.321905] pci 0000:00:12.0: reg 0x24: [mem 0x9141b000-0x9141b7ff]
[ 0.321974] pci 0000:00:12.0: PME# supported from D3hot
[ 0.322758] pci 0000:00:13.0: [8086:5ad8] type 01 class 0x060400
[ 0.322929] pci 0000:00:13.0: PME# supported from D0 D3hot D3cold
[ 0.323752] pci 0000:00:14.0: [8086:5ad6] type 01 class 0x060400
[ 0.323879] pci 0000:00:14.0: PME# supported from D0 D3hot D3cold
[ 0.324659] pci 0000:00:14.1: [8086:5ad7] type 01 class 0x060400
[ 0.324785] pci 0000:00:14.1: PME# supported from D0 D3hot D3cold
[ 0.325590] pci 0000:00:15.0: [8086:5aa8] type 00 class 0x0c0330
[ 0.325629] pci 0000:00:15.0: reg 0x10: [mem 0x91400000-0x9140ffff 64bit]
[ 0.325726] pci 0000:00:15.0: PME# supported from D3hot D3cold
[ 0.326532] pci 0000:00:17.0: [8086:5ab4] type 00 class 0x118000
[ 0.326576] pci 0000:00:17.0: reg 0x10: [mem 0x91419000-0x91419fff 64bit]
[ 0.326593] pci 0000:00:17.0: reg 0x18: [mem 0x9141a000-0x9141afff 64bit]
[ 0.327496] pci 0000:00:1f.0: [8086:5ae8] type 00 class 0x060100
[ 0.328411] pci 0000:00:1f.1: [8086:5ad4] type 00 class 0x0c0500
[ 0.328486] pci 0000:00:1f.1: reg 0x10: [mem 0x9141c000-0x9141c0ff 64bit]
[ 0.328569] pci 0000:00:1f.1: reg 0x20: [io 0x3040-0x305f]
[ 0.329539] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.329726] pci 0000:02:00.0: [10ec:8136] type 00 class 0x020000
[ 0.329796] pci 0000:02:00.0: reg 0x10: [io 0x2000-0x20ff]
[ 0.329852] pci 0000:02:00.0: reg 0x18: [mem 0x91300000-0x91300fff 64bit]
[ 0.329888] pci 0000:02:00.0: reg 0x20: [mem 0x91000000-0x91003fff 64bit pref
]
[ 0.329936] pci 0000:02:00.0: Upstream bridge's Max Payload Size set to 128 (
was 256, max 256)
[ 0.329950] pci 0000:02:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 0.330181] pci 0000:02:00.0: supports D1 D2
[ 0.330184] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.330512] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.330519] pci 0000:00:14.0: bridge window [io 0x2000-0x2fff]
[ 0.330525] pci 0000:00:14.0: bridge window [mem 0x91300000-0x913fffff]
[ 0.330534] pci 0000:00:14.0: bridge window [mem 0x91000000-0x910fffff 64bi
t pref]
[ 0.330677] pci 0000:03:00.0: [10ec:8821] type 00 class 0x028000
[ 0.330742] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
[ 0.330803] pci 0000:03:00.0: reg 0x18: [mem 0x91200000-0x91203fff 64bit]
[ 0.330888] pci 0000:03:00.0: Upstream bridge's Max Payload Size set to 128 (
was 256, max 256)
[ 0.330898] pci 0000:03:00.0: Max Payload Size set to 128 (was 128, max 128)
[ 0.331049] pci 0000:03:00.0: supports D1 D2
[ 0.331053] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.331355] pci 0000:00:14.1: PCI bridge to [bus 03]
[ 0.331362] pci 0000:00:14.1: bridge window [io 0x1000-0x1fff]
[ 0.331368] pci 0000:00:14.1: bridge window [mem 0x91200000-0x912fffff]
[ 0.333834] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.334110] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.334382] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.334655] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.334933] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.335208] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.335480] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.335750] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 *15), d
isabled.
[ 0.337535] ACPI: EC: interrupt unblocked
[ 0.337599] ACPI: EC: event unblocked
[ 0.337632] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x2b, EC_CMD/EC_SC=0x66, EC_DATA=
0x62
[ 0.337636] ACPI: \_SB_.PCI0.LPCB.EC0_: Boot DSDT EC used to handle transacti
ons and events
[ 0.337942] SCSI subsystem initialized
[ 0.338857] libata version 3.00 loaded.
[ 0.338949] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[ 0.338954] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=i
o+mem,locks=none
[ 0.338966] pci 0000:00:02.0: vgaarb: bridge control possible
[ 0.338967] vgaarb: loaded
[ 0.339027] ACPI: bus type USB registered
[ 0.339064] usbcore: registered new interface driver usbfs
[ 0.339064] usbcore: registered new interface driver hub
[ 0.339064] usbcore: registered new device driver usb
[ 0.339064] pps_core: LinuxPPS API ver. 1 registered
[ 0.339064] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giome
tti <giome...@linux.it>
[ 0.339064] PTP clock support registered
[ 0.339092] EDAC MC: Ver: 3.0.0
[ 0.339092] PCI: Using ACPI for IRQ routing
[ 0.346429] PCI: pci_cache_line_size set to 64 bytes
[ 0.346554] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[ 0.346558] e820: reserve RAM buffer [mem 0x67b50000-0x67ffffff]
[ 0.346560] e820: reserve RAM buffer [mem 0x67ba7000-0x67ffffff]
[ 0.346562] e820: reserve RAM buffer [mem 0x7822f000-0x7bffffff]
[ 0.346565] e820: reserve RAM buffer [mem 0x7b000000-0x7bffffff]
[ 0.346846] NetLabel: Initializing
[ 0.346848] NetLabel: domain hash size = 128
[ 0.346850] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.346886] NetLabel: unlabeled traffic allowed by default
[ 0.348961] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.348974] hpet0: 8 comparators, 64-bit 19.200000 MHz counter
[ 0.350896] clocksource: Switched to clocksource tsc-early
[ 0.390448] VFS: Disk quotas dquot_6.6.0
[ 0.390493] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.390570] *** VALIDATE hugetlbfs ***
[ 0.390850] AppArmor: AppArmor Filesystem Enabled
[ 0.390925] pnp: PnP ACPI init
[ 0.392905] pnp 00:00: disabling [io 0x164e-0x164f] because it overlaps 0000
:00:14.1 BAR 13 [io 0x1000-0x1fff]
[ 0.392999] system 00:00: [io 0x0680-0x069f] has been reserved
[ 0.393005] system 00:00: [io 0x0400-0x047f] could not be reserved
[ 0.393009] system 00:00: [io 0x0500-0x05fe] has been reserved
[ 0.393013] system 00:00: [io 0x0600-0x061f] has been reserved
[ 0.393029] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.393155] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.393786] system 00:02: [mem 0xe0000000-0xefffffff] could not be reserved
[ 0.393791] system 00:02: [mem 0xfea00000-0xfeafffff] has been reserved
[ 0.393796] system 00:02: [mem 0xfed01000-0xfed01fff] has been reserved
[ 0.393800] system 00:02: [mem 0xfed03000-0xfed03fff] has been reserved
[ 0.393804] system 00:02: [mem 0xfed06000-0xfed06fff] has been reserved
[ 0.393808] system 00:02: [mem 0xfed08000-0xfed09fff] has been reserved
[ 0.393812] system 00:02: [mem 0xfed80000-0xfedbffff] has been reserved
[ 0.393816] system 00:02: [mem 0xfed1c000-0xfed1cfff] has been reserved
[ 0.393821] system 00:02: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.393834] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.394737] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.395069] pnp: PnP ACPI: found 4 devices
[ 0.399976] thermal_sys: Registered thermal governor 'fair_share'
[ 0.399979] thermal_sys: Registered thermal governor 'bang_bang'
[ 0.399982] thermal_sys: Registered thermal governor 'step_wise'
[ 0.399983] thermal_sys: Registered thermal governor 'user_space'
[ 0.399985] thermal_sys: Registered thermal governor 'power_allocator'
[ 0.404493] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_id
le_ns: 2085701024 ns
[ 0.404620] pci 0000:00:13.0: PCI bridge to [bus 01]
[ 0.404645] pci 0000:00:14.0: PCI bridge to [bus 02]
[ 0.404652] pci 0000:00:14.0: bridge window [io 0x2000-0x2fff]
[ 0.404659] pci 0000:00:14.0: bridge window [mem 0x91300000-0x913fffff]
[ 0.404665] pci 0000:00:14.0: bridge window [mem 0x91000000-0x910fffff 64bi
t pref]
[ 0.404673] pci 0000:00:14.1: PCI bridge to [bus 03]
[ 0.404678] pci 0000:00:14.1: bridge window [io 0x1000-0x1fff]
[ 0.404685] pci 0000:00:14.1: bridge window [mem 0x91200000-0x912fffff]
[ 0.404698] pci_bus 0000:00: resource 4 [io 0x0070-0x0077]
[ 0.404702] pci_bus 0000:00: resource 5 [io 0x0000-0x006f window]
[ 0.404705] pci_bus 0000:00: resource 6 [io 0x0078-0x0cf7 window]
[ 0.404709] pci_bus 0000:00: resource 7 [io 0x0d00-0xffff window]
[ 0.404712] pci_bus 0000:00: resource 8 [mem 0x000a0000-0x000bffff window]
[ 0.404716] pci_bus 0000:00: resource 9 [mem 0x000c0000-0x000dffff window]
[ 0.404719] pci_bus 0000:00: resource 10 [mem 0x000e0000-0x000fffff window]
[ 0.404723] pci_bus 0000:00: resource 11 [mem 0x7c000001-0x7fffffff window]
[ 0.404726] pci_bus 0000:00: resource 12 [mem 0x7b800001-0x7bffffff window]
[ 0.404730] pci_bus 0000:00: resource 13 [mem 0x80000000-0xcfffffff window]
[ 0.404733] pci_bus 0000:00: resource 14 [mem 0xe0000000-0xefffffff window]
[ 0.404738] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.404741] pci_bus 0000:02: resource 1 [mem 0x91300000-0x913fffff]
[ 0.404744] pci_bus 0000:02: resource 2 [mem 0x91000000-0x910fffff 64bit pref
]
[ 0.404748] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
[ 0.404751] pci_bus 0000:03: resource 1 [mem 0x91200000-0x912fffff]
[ 0.405114] NET: Registered protocol family 2
[ 0.405520] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 3276
8 bytes, linear)
[ 0.405621] TCP established hash table entries: 32768 (order: 6, 262144 bytes
, linear)
[ 0.405977] TCP bind hash table entries: 32768 (order: 7, 524288 bytes, linea
r)
[ 0.406327] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.406456] UDP hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.406542] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes, linear)
[ 0.406904] NET: Registered protocol family 1
[ 0.406919] NET: Registered protocol family 44
[ 0.406950] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c00
00-0x000dffff]
[ 1.569461] pci 0000:00:15.0: xHCI BIOS handoff failed (BIOS bug ?) 00012201
[ 1.569845] pci 0000:00:15.0: quirk_usb_early_handoff+0x0/0x662 took 1135568
usecs
[ 1.569896] PCI: CLS 64 bytes, default 64
[ 1.570042] Trying to unpack rootfs image as initramfs...
[ 1.962810] Freeing initrd memory: 46776K
[ 1.962872] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.962881] software IO TLB: mapped [mem 0x7422f000-0x7822f000] (64MB)
[ 1.963002] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0xfc66f4fc
7c, max_idle_ns: 440795224246 ns
[ 1.963037] clocksource: Switched to clocksource tsc
[ 1.963207] check: Scanning for low memory corruption every 60 seconds
[ 1.968692] Initialise system trusted keyrings
[ 1.968723] Key type blacklist registered
[ 1.968831] workingset: timestamp_bits=36 max_order=20 bucket_order=0
[ 1.973054] zbud: loaded
[ 1.974206] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 1.974720] fuse: init (API version 7.31)
[ 1.975095] Platform Keyring initialized
[ 1.987006] Key type asymmetric registered
[ 1.987009] Asymmetric key parser 'x509' registered
[ 1.987029] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 2
44)
[ 1.987142] io scheduler mq-deadline registered
[ 1.988057] pcieport 0000:00:13.0: PME: Signaling with IRQ 120
[ 1.988583] pcieport 0000:00:14.0: PME: Signaling with IRQ 121
[ 1.989090] pcieport 0000:00:14.1: PME: Signaling with IRQ 122
[ 1.989239] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.989406] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 1.989408] vesafb: scrolling: redraw
[ 1.989412] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.989453] vesafb: framebuffer at 0x80000000, mapped to 0x00000000d0bc9148,
using 4160k, total 4160k
[ 1.989585] fbcon: Deferring console take-over
[ 1.989588] fb0: VESA VGA frame buffer device
[ 1.989626] intel_idle: MWAIT substates: 0x11242020
[ 1.989629] intel_idle: v0.4.1 model 0x5C
[ 1.989954] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 1.991310] ACPI: AC Adapter [ADP0] (on-line)
[ 1.991526] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/
input/input0
[ 1.991542] ACPI: Lid Switch [LID0]
[ 1.991645] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:0
0/input/input1
[ 1.991662] ACPI: Power Button [PWRB]
[ 1.996877] Serial: 8250/16550 driver, 32 ports, IRQ sharing enabled
[ 2.041686] Linux agpgart interface v0.103
[ 2.047014] loop: module loaded
[ 2.047578] libphy: Fixed MDIO Bus: probed
[ 2.047590] tun: Universal TUN/TAP device driver, 1.6
[ 2.047663] PPP generic driver version 2.4.2
[ 2.047765] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 2.047772] ehci-pci: EHCI PCI platform driver
[ 2.047799] ehci-platform: EHCI generic platform driver
[ 2.047824] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 2.047829] ohci-pci: OHCI PCI platform driver
[ 2.047848] ohci-platform: OHCI generic platform driver
[ 2.047864] uhci_hcd: USB Universal Host Controller Interface driver
[ 2.048379] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.048393] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus numbe
r 1
[ 2.049518] xhci_hcd 0000:00:15.0: hcc params 0x200077c1 hci version 0x100 qu
irks 0x0000000081109810
[ 2.049527] xhci_hcd 0000:00:15.0: cache line size of 64 is not supported
[ 2.049907] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bc
dDevice= 5.03
[ 2.049912] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.049916] usb usb1: Product: xHCI Host Controller
[ 2.049919] usb usb1: Manufacturer: Linux 5.3.0-46-generic xhci-hcd
[ 2.049923] usb usb1: SerialNumber: 0000:00:15.0
[ 2.050217] hub 1-0:1.0: USB hub found
[ 2.050244] hub 1-0:1.0: 8 ports detected
[ 2.052459] xhci_hcd 0000:00:15.0: xHCI Host Controller
[ 2.052469] xhci_hcd 0000:00:15.0: new USB bus registered, assigned bus numbe
r 2
[ 2.052478] xhci_hcd 0000:00:15.0: Host supports USB 3.0 SuperSpeed
[ 2.052584] usb usb2: New USB device found, idVendor=1d6b, idProduct=0003, bc
dDevice= 5.03
[ 2.052588] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=
1
[ 2.052591] usb usb2: Product: xHCI Host Controller
[ 2.052595] usb usb2: Manufacturer: Linux 5.3.0-46-generic xhci-hcd
[ 2.052598] usb usb2: SerialNumber: 0000:00:15.0
[ 2.052858] hub 2-0:1.0: USB hub found
[ 2.052883] hub 2-0:1.0: 7 ports detected
[ 2.054896] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 2.054899] i8042: PNP: PS/2 appears to have AUX port disabled, if this is in
correct please boot with i8042.nopnp
[ 2.060732] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.060969] mousedev: PS/2 mouse device common for all mice
[ 2.061602] rtc_cmos 00:03: RTC can wake from S4
[ 2.062156] rtc_cmos 00:03: registered as rtc0
[ 2.062197] rtc_cmos 00:03: alarms up to one month, y3k, 242 bytes nvram, hpe
t irqs
[ 2.062211] i2c /dev entries driver
[ 2.062349] device-mapper: uevent: version 1.0.3
[ 2.062511] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-d
e...@redhat.com
[ 2.062568] platform eisa.0: Probing EISA bus 0
[ 2.062573] platform eisa.0: EISA: Cannot allocate resource for mainboard
[ 2.062577] platform eisa.0: Cannot allocate resource for EISA slot 1
[ 2.062580] platform eisa.0: Cannot allocate resource for EISA slot 2
[ 2.062583] platform eisa.0: Cannot allocate resource for EISA slot 3
[ 2.062586] platform eisa.0: Cannot allocate resource for EISA slot 4
[ 2.062589] platform eisa.0: Cannot allocate resource for EISA slot 5
[ 2.062592] platform eisa.0: Cannot allocate resource for EISA slot 6
[ 2.062595] platform eisa.0: Cannot allocate resource for EISA slot 7
[ 2.062598] platform eisa.0: Cannot allocate resource for EISA slot 8
[ 2.062601] platform eisa.0: EISA: Detected 0 cards
[ 2.062615] intel_pstate: Intel P-state driver initializing
[ 2.063260] ledtrig-cpu: registered to indicate activity on CPUs
[ 2.064541] NET: Registered protocol family 10
[ 2.076805] input: AT Translated Set 2 keyboard as /devices/platform/i8042/se
rio0/input/input2
[ 2.082204] Segment Routing with IPv6
[ 2.082246] NET: Registered protocol family 17
[ 2.082563] Key type dns_resolver registered
[ 2.082994] RAS: Correctable Errors collector initialized.
[ 2.083130] microcode: sig=0x506c9, pf=0x1, revision=0x38
[ 2.083203] microcode: Microcode Update Driver: v2.2.
[ 2.083506] *** VALIDATE rdt ***
[ 2.083525] resctrl: L2 allocation detected
[ 2.083562] sched_clock: Marking stable (2082477637, 967115)->(2089040120, -5
595368)
[ 2.083902] registered taskstats version 1
[ 2.083916] Loading compiled-in X.509 certificates
[ 2.090584] Loaded X.509 cert 'Build time autogenerated kernel key: 58cc9974d
2170f3c76d2e16eeb21349faa3b1809'
[ 2.090644] zswap: loaded using pool lzo/zbud
[ 2.107634] Key type big_key registered
[ 2.117690] Key type encrypted registered
[ 2.117702] AppArmor: AppArmor sha1 policy hashing enabled
[ 2.117718] ima: No TPM chip found, activating TPM-bypass!
[ 2.117735] ima: Allocated hash algorithm: sha1
[ 2.117746] No architecture policies found
[ 2.117768] evm: Initialising EVM extended attributes:
[ 2.117769] evm: security.selinux
[ 2.117770] evm: security.SMACK64
[ 2.117770] evm: security.SMACK64EXEC
[ 2.117771] evm: security.SMACK64TRANSMUTE
[ 2.117772] evm: security.SMACK64MMAP
[ 2.117772] evm: security.apparmor
[ 2.117773] evm: security.ima
[ 2.117774] evm: security.capability
[ 2.117775] evm: HMAC attrs: 0x1
[ 2.118478] PM: Magic number: 0:737:639
[ 2.118718] rtc_cmos 00:03: setting system clock to 2020-04-21T15:36:54 UTC (
1587483414)
[ 2.141885] battery: ACPI: Battery Slot [BAT0] (battery present)
[ 2.144999] Freeing unused decrypted memory: 2040K
[ 2.146062] Freeing unused kernel image memory: 2676K
[ 2.151035] Write protecting the kernel read-only data: 22528k
[ 2.152231] Freeing unused kernel image memory: 2008K
[ 2.152930] Freeing unused kernel image memory: 1420K
[ 2.170293] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 2.170301] Run /init as init process
[ 2.336306] hidraw: raw HID events driver (C) Jiri Kosina
[ 2.339023] ahci 0000:00:12.0: version 3.0
[ 2.349434] ahci 0000:00:12.0: AHCI 0001.0301 32 slots 2 ports 6 Gbps 0x3 imp
l SATA mode
[ 2.349439] ahci 0000:00:12.0: flags: 64bit ncq sntf clo only pmp pio slum pa
rt deso sadm sds apst
[ 2.352664] scsi host0: ahci
[ 2.353382] scsi host1: ahci
[ 2.353513] ata1: SATA max UDMA/133 abar m2048@0x9141b000 port 0x9141b100 irq
124
[ 2.353516] ata2: SATA max UDMA/133 abar m2048@0x9141b000 port 0x9141b180 irq
124
[ 2.363578] i801_smbus 0000:00:1f.1: SPD Write Disable is set
[ 2.363624] i801_smbus 0000:00:1f.1: SMBus using PCI interrupt
[ 2.373729] libphy: r8169: probed
[ 2.373951] r8169 0000:02:00.0 eth0: RTL8106e, 8c:16:45:43:9f:2e, XID 449, IR
Q 125
[ 2.380690] i2c_hid i2c-ELAN0609:00: i2c-ELAN0609:00 supply vdd not found, us
ing dummy regulator
[ 2.380713] i2c_hid i2c-ELAN0609:00: i2c-ELAN0609:00 supply vddl not found, u
sing dummy regulator
[ 2.386999] usb 2-2: new SuperSpeed Gen 1 USB device number 2 using xhci_hcd
[ 2.416701] r8169 0000:02:00.0 enp2s0: renamed from eth0
[ 2.641137] usb 2-2: New USB device found, idVendor=2109, idProduct=0812, bcd
Device= b.e1
[ 2.641141] usb 2-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.641144] usb 2-2: Product: USB3.0 Hub
[ 2.641146] usb 2-2: Manufacturer: VIA Labs, Inc.
[ 2.644934] hub 2-2:1.0: USB hub found
[ 2.645101] hub 2-2:1.0: 4 ports detected
[ 2.667118] ata2: SATA link down (SStatus 4 SControl 300)
[ 2.767146] usb 1-2: new high-speed USB device number 2 using xhci_hcd
[ 2.791203] usb 1-2: New USB device found, idVendor=2109, idProduct=2812, bcd
Device= b.e0
[ 2.791207] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.791209] usb 1-2: Product: USB2.0 Hub
[ 2.791211] usb 1-2: Manufacturer: VIA Labs, Inc.
[ 2.792987] hub 1-2:1.0: USB hub found
[ 2.793254] hub 1-2:1.0: 4 ports detected
[ 2.827153] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.827321] ata1.00: supports DRM functions and may not be fully accessible
[ 2.827354] ata1.00: ATA-10: CT500MX500SSD1, M3CR023, max UDMA/133
[ 2.827356] ata1.00: 976773168 sectors, multi 1: LBA48 NCQ (depth 32), AA
[ 2.828707] ata1.00: supports DRM functions and may not be fully accessible
[ 2.829796] ata1.00: configured for UDMA/133
[ 2.830057] scsi 0:0:0:0: Direct-Access ATA CT500MX500SSD1 023 PQ
: 0 ANSI: 5
[ 2.830414] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/466
GiB)
[ 2.830416] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 2.830438] sd 0:0:0:0: [sda] Write Protect is off
[ 2.830441] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.830469] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, does
n't support DPO or FUA
[ 2.830860] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 2.831447] sda: sda1
[ 2.832330] sd 0:0:0:0: [sda] supports TCG Opal
[ 2.832334] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.927025] usb 1-4: new full-speed USB device number 3 using xhci_hcd
[ 3.078442] usb 1-4: New USB device found, idVendor=1cf1, idProduct=0030, bcd
Device= 1.00
[ 3.078446] usb 1-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 3.078448] usb 1-4: Product: ConBee II
[ 3.078450] usb 1-4: Manufacturer: dresden elektronik ingenieurtechnik GmbH
[ 3.078451] usb 1-4: SerialNumber: DE1997722
[ 3.155204] usb 2-2.3: new SuperSpeed Gen 1 USB device number 3 using xhci_hc
d
[ 3.175905] usb 2-2.3: New USB device found, idVendor=0bda, idProduct=8153, b
cdDevice=30.00
[ 3.175909] usb 2-2.3: New USB device strings: Mfr=1, Product=2, SerialNumber
=6
[ 3.175911] usb 2-2.3: Product: USB 10/100/1000 LAN
[ 3.175912] usb 2-2.3: Manufacturer: Realtek
[ 3.175914] usb 2-2.3: SerialNumber: 000002000000
[ 3.307157] usb 1-2.1: new low-speed USB device number 4 using xhci_hcd
[ 3.466457] usb 1-2.1: New USB device found, idVendor=045e, idProduct=00a4, b
cdDevice= 0.01
[ 3.466464] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 3.466469] usb 1-2.1: Product: Microsoft(R) Compact Optical Mouse
[ 3.466472] usb 1-2.1: Manufacturer: Microsoft
[ 3.587146] usb 1-7: new high-speed USB device number 5 using xhci_hcd
[ 3.630827] usb 1-7: New USB device found, idVendor=5986, idProduct=1127, bcd
Device=53.07
[ 3.630861] usb 1-7: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 3.630864] usb 1-7: Product: EasyCamera
[ 3.630866] usb 1-7: Manufacturer: Generic
[ 3.630868] usb 1-7: SerialNumber: 200901010001
[ 3.739154] usb 1-2.2: new low-speed USB device number 6 using xhci_hcd
[ 3.898180] usb 1-2.2: New USB device found, idVendor=046d, idProduct=c31c, b
cdDevice=64.02
[ 3.898187] usb 1-2.2: New USB device strings: Mfr=1, Product=2, SerialNumber
=0
[ 3.898192] usb 1-2.2: Product: USB Keyboard
[ 3.898195] usb 1-2.2: Manufacturer: Logitech
[ 4.019177] usb 1-8: new full-speed USB device number 7 using xhci_hcd
[ 4.169801] usb 1-8: New USB device found, idVendor=0bda, idProduct=0821, bcd
Device= 2.00
[ 4.169804] usb 1-8: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 4.169806] usb 1-8: Product: Bluetooth Radio
[ 4.169808] usb 1-8: Manufacturer: Realtek
[ 4.169809] usb 1-8: SerialNumber: 00e04c000001
[ 4.197554] usbcore: registered new interface driver usbhid
[ 4.197557] usbhid: USB HID core driver
[ 4.201802] input: Microsoft Microsoft(R) Compact Optical Mouse as /devices/p
ci0000:00/0000:00:15.0/usb1/1-2/1-2.1/1-2.1:1.0/0003:045E:00A4.0001/input/input3
[ 4.202122] hid-generic 0003:045E:00A4.0001: input,hidraw0: USB HID v1.10 Mou
se [Microsoft Microsoft(R) Compact Optical Mouse] on usb-0000:00:15.0-2.1/input0
[ 4.202486] input: Logitech USB Keyboard as /devices/pci0000:00/0000:00:15.0/
usb1/1-2/1-2.2/1-2.2:1.0/0003:046D:C31C.0002/input/input4
[ 4.259559] hid-generic 0003:046D:C31C.0002: input,hidraw1: USB HID v1.10 Key
board [Logitech USB Keyboard] on usb-0000:00:15.0-2.2/input0
[ 4.260015] input: Logitech USB Keyboard Consumer Control as /devices/pci0000
:00/0000:00:15.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C31C.0003/input/input5
[ 4.319587] input: Logitech USB Keyboard System Control as /devices/pci0000:0
0/0000:00:15.0/usb1/1-2/1-2.2/1-2.2:1.1/0003:046D:C31C.0003/input/input6
[ 4.320009] hid-generic 0003:046D:C31C.0003: input,hiddev0,hidraw2: USB HID v
1.10 Device [Logitech USB Keyboard] on usb-0000:00:15.0-2.2/input1
[ 4.396182] fbcon: Taking over console
[ 4.396314] Console: switching to colour frame buffer device 170x48
[ 4.407486] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts:
(null)
[ 4.616066] systemd[1]: Inserted module 'autofs4'
[ 4.635935] systemd[1]: systemd 242 running in system mode. (+PAM +AUDIT +SEL
INUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +
XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default-hierarchy=hybr
id)
[ 4.655197] systemd[1]: Detected architecture x86-64.
[ 4.658659] systemd[1]: Set hostname to <homeserver>.
[ 4.659519] systemd[1]: Failed to bump fs.file-max, ignoring: Invalid argumen
t
[ 4.789981] systemd[1]: /lib/systemd/system/dbus.socket:4: ListenStream= refe
rences a path below legacy directory /var/run/, updating /var/run/dbus/system_bu
s_socket → /run/dbus/system_bus_socket; please update the unit file accordingly.
[ 4.803026] systemd[1]: /lib/systemd/system/xrdp-sesman.service:9: PIDFile= r
eferences a path below legacy directory /var/run/, updating /var/run/xrdp/xrdp-s
esman.pid → /run/xrdp/xrdp-sesman.pid; please update the unit file accordingly.
[ 4.803535] systemd[1]: /lib/systemd/system/xrdp.service:8: PIDFile= referenc
es a path below legacy directory /var/run/, updating /var/run/xrdp/xrdp.pid → /r
un/xrdp/xrdp.pid; please update the unit file accordingly.
[ 4.846381] systemd[1]: /lib/systemd/system/docker.socket:5: ListenStream= re
ferences a path below legacy directory /var/run/, updating /var/run/docker.sock
→ /run/docker.sock; please update the unit file accordingly.
[ 4.876109] systemd[1]: Listening on Journal Socket (/dev/log).
[ 4.876310] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 4.903512] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.990607] lp: driver loaded but no devices found
[ 5.015761] ppdev: user-space parallel port driver
[ 5.260391] Adding 2097148k swap on /swapfile. Priority:-2 extents:6 across:
2260988k SSFS
[ 5.608770] audit: type=1400 audit(1587483417.987:2): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="libreoffice-xpdfimport" pid=384 c
omm="apparmor_parser"
[ 5.615574] audit: type=1400 audit(1587483417.995:3): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/sbin/tcpdump" pid=386 comm="
apparmor_parser"
[ 5.615952] audit: type=1400 audit(1587483417.995:4): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine" pid=
385 comm="apparmor_parser"
[ 5.615957] audit: type=1400 audit(1587483417.995:5): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/lib/snapd/snap-confine//moun
t-namespace-capture-helper" pid=385 comm="apparmor_parser"
[ 5.622244] audit: type=1400 audit(1587483417.999:6): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="/usr/sbin/ippusbxd" pid=388 comm=
"apparmor_parser"
[ 5.666967] audit: type=1400 audit(1587483418.047:7): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="libreoffice-soffice" pid=387 comm
="apparmor_parser"
[ 5.666971] audit: type=1400 audit(1587483418.047:8): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="libreoffice-soffice//gpg" pid=387
comm="apparmor_parser"
[ 5.678375] audit: type=1400 audit(1587483418.055:9): apparmor="STATUS" opera
tion="profile_load" profile="unconfined" name="lsb_release" pid=390 comm="apparm
or_parser"
[ 5.699691] audit: type=1400 audit(1587483418.079:10): apparmor="STATUS" oper
ation="profile_load" profile="unconfined" name="libreoffice-senddoc" pid=391 com
m="apparmor_parser"
[ 5.700392] audit: type=1400 audit(1587483418.079:11): apparmor="STATUS" oper
ation="profile_load" profile="unconfined" name="/usr/bin/evince" pid=389 comm="a
pparmor_parser"
[ 5.824883] systemd-journald[298]: Received request to flush runtime journal
from PID 1
[ 6.535266] elan_i2c i2c-ELAN0609:00: i2c-ELAN0609:00 supply vcc not found, u
sing dummy regulator
[ 6.627553] input: Ideapad extra buttons as /devices/pci0000:00/0000:00:1f.0/
PNP0C09:00/VPC2004:00/input/input7
[ 6.656383] elan_i2c i2c-ELAN0609:00: Elan Touchpad: Module ID: 0x005b, Firmw
are: 0x0001, Sample: 0x0002, IAP: 0x000d
[ 6.660047] input: Elan Touchpad as /devices/pci0000:00/0000:00:17.0/i2c_desi
gnware.0/i2c-1/i2c-ELAN0609:00/input/input8
[ 7.214379] cfg80211: Loading compiled-in X.509 certificates for regulatory d
atabase
[ 7.553077] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 7.565138] idma64 idma64.0: Found Intel integrated DMA 64-bit
[ 7.799056] aufs 4.x-rcN-20190805
[ 8.159025] Bluetooth: Core ver 2.22
[ 8.159056] NET: Registered protocol family 31
[ 8.159057] Bluetooth: HCI device and connection manager initialized
[ 8.159063] Bluetooth: HCI socket layer initialized
[ 8.159066] Bluetooth: L2CAP socket layer initialized
[ 8.159071] Bluetooth: SCO socket layer initialized
[ 8.207013] usbcore: registered new interface driver r8152
[ 8.224755] cdc_acm 1-4:1.0: ttyACM0: USB ACM device
[ 8.248841] usbcore: registered new interface driver cdc_ether
[ 8.287115] usb 2-2.3: reset SuperSpeed Gen 1 USB device number 3 using xhci_
hcd
[ 8.307700] usbcore: registered new interface driver cdc_acm
[ 8.307703] cdc_acm: USB Abstract Control Model driver for USB modems and ISD
N adapters
[ 8.315118] usbcore: registered new interface driver btusb
[ 8.316284] mc: Linux media interface: v0.10
[ 8.320492] Bluetooth: hci0: RTL: rtl: examining hci_ver=06 hci_rev=000a lmp_
ver=06 lmp_subver=8821
[ 8.321511] Bluetooth: hci0: RTL: rom_version status=0 version=1
[ 8.321516] Bluetooth: hci0: RTL: rtl: loading rtl_bt/rtl8821a_fw.bin
[ 8.323445] Bluetooth: hci0: RTL: rtl: loading
rtl_bt/rtl8821a_config.bin
[ 8.323498] bluetooth hci0: Direct firmware load for rtl_bt/rtl8821a_config.b
in failed with error -2
[ 8.323510] Bluetooth: hci0: RTL: cfg_sz -2, total sz 17428
[ 8.348742] r8152 2-2.3:1.0 eth0: v1.09.11
[ 8.586635] videodev: Linux video capture interface: v2.00
[ 8.661208] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms o
vfl timer
[ 8.661211] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 8.661212] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 8.661213] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 8.661214] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 8.870799] cryptd: max_cpu_qlen set to 1000
[ 8.925364] SSE version of gcm_enc/dec engaged.
[ 8.930362] Generic PHY r8169-200:00: attached PHY driver [Generic PHY] (mii_
bus:phy_addr=r8169-200:00, irq=IGNORE)
[ 9.046285] checking generic (80000000 410000) vs hw (80000000 10000000)
[ 9.046289] fb0: switching to inteldrmfb from VESA VGA
[ 9.048031] Console: switching to colour dummy device 80x25
[ 9.050919] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 9.051269] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 9.051270] [drm] Driver supports precise vblank timestamp query.
[ 9.051425] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem
,decodes=io+mem:owns=io+mem
[ 9.056961] [drm] Finished loading DMC firmware i915/bxt_dmc_ver1_07.bin (v1.
7)
[ 9.078926] uvcvideo: Found UVC 1.00 device EasyCamera (5986:1127)
[ 9.115020] uvcvideo 1-7:1.0: Entity type for entity Extension 4 was not init
ialized!
[ 9.115024] uvcvideo 1-7:1.0: Entity type for entity Processing 2 was not ini
tialized!
[ 9.115025] uvcvideo 1-7:1.0: Entity type for entity Camera 1 was not initial
ized!
[ 9.115138] input: EasyCamera: EasyCamera as /devices/pci0000:00/0000:00:15.0
/usb1/1-7/1-7:1.0/input/input9
[ 9.115569] usbcore: registered new interface driver uvcvideo
[ 9.115571] USB Video Class driver (1.1.1)
[ 9.122880] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_29.bin
[ 9.122887] rtl8821ae: Using firmware rtlwifi/rtl8821aefw_wowlan.bin
[ 9.167375] [drm] Initialized i915 1.6.0 20190619 for 0000:00:02.0 on minor 0
[ 9.169263] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.169294] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 9.169620] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/L
NXVIDEO:00/input/input10
[ 9.212628] r8169 0000:02:00.0 enp2s0: Link is Down
[ 9.231206] ieee80211 phy0: Selected rate control algorithm 'rtl_rc'
[ 9.231548] rtlwifi: rtlwifi: wireless switch is on
[ 9.250277] fbcon: i915drmfb (fb0) is primary device
[ 9.250407] Console: switching to colour frame buffer device 170x48
[ 9.250439] i915 0000:00:02.0: fb0: i915drmfb frame buffer device
[ 9.661940] kvm: disabled by bios
[ 9.716664] kvm: disabled by bios
[ 9.765392] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[ 9.765435] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[ 9.765477] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0
[ 9.765517] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[ 9.765559] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[ 9.765599] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[ 9.765641] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[ 9.765721] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
[ 9.765763] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[ 9.765803] EDAC pnd2: d_cr_drp0=0c000c005 ret=0
[ 9.765843] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.765884] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.765925] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.765926] EDAC pnd2: ECC disabled on channel 0
[ 9.765927] EDAC pnd2: Failed to register device with error -22.
[ 9.800919] EDAC pnd2: b_cr_tolud_pci=080000001 ret=0
[ 9.800962] EDAC pnd2: b_cr_touud_lo_pci=080000000 ret=0
[ 9.801003] EDAC pnd2: b_cr_touud_hi_pci=000000001 ret=0
[ 9.801045] EDAC pnd2: b_cr_asym_mem_region0_mchbar=000000000 ret=0
[ 9.801085] EDAC pnd2: b_cr_asym_mem_region1_mchbar=000000000 ret=0
[ 9.801127] EDAC pnd2: b_cr_mot_out_base_mchbar=000000000 ret=0
[ 9.801167] EDAC pnd2: b_cr_mot_out_mask_mchbar=000000000 ret=0
[ 9.801248] EDAC pnd2: b_cr_slice_channel_hash=8000000480000001 ret=0
[ 9.801289] EDAC pnd2: b_cr_asym_2way_mem_region_mchbar=000000000 ret=0
[ 9.801330] EDAC pnd2: d_cr_drp0=0c000c005 ret=0
[ 9.801371] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.801411] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.801452] EDAC pnd2: d_cr_drp0=000000000 ret=2
[ 9.801453] EDAC pnd2: ECC disabled on channel 0
[ 9.801454] EDAC pnd2: Failed to register device with error -22.
[ 9.843335] intel_telemetry_core Init
[ 9.909520] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 9.960343] Invalid pltconfig, ensure IPC1 device is enabled in BIOS
[ 10.518541] snd_hda_intel 0000:00:0e.0: bound 0000:00:02.0 (ops i915_audio_co
mponent_bind_ops [i915])
[ 10.642752] snd_hda_codec_generic hdaudioC0D0: autoconfig for Generic: line_o
uts=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 10.642756] snd_hda_codec_generic hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0
/0x0/0x0)
[ 10.642758] snd_hda_codec_generic hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0
/0x0)
[ 10.642759] snd_hda_codec_generic hdaudioC0D0: mono: mono_out=0x0
[ 10.642761] snd_hda_codec_generic hdaudioC0D0: inputs:
[ 10.642763] snd_hda_codec_generic hdaudioC0D0: Mic=0x19
[ 10.642765] snd_hda_codec_generic hdaudioC0D0: Internal Mic=0x12
[ 10.671654] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:0e.0/soun
d/card0/input11
[ 10.671749] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:0e.
0/sound/card0/input12
[ 10.671824] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00
:0e.0/sound/card0/input13
[ 10.671896] input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00
:0e.0/sound/card0/input14
[ 10.671966] input: HDA Intel PCH HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00
:0e.0/sound/card0/input15
[ 10.672038] input: HDA Intel PCH HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00
:0e.0/sound/card0/input16
[ 10.672111] input: HDA Intel PCH HDMI/DP,pcm=10 as /devices/pci0000:00/0000:0
0:0e.0/sound/card0/input17
[ 10.707641] r8169 0000:02:00.0 enp2s0: Link is Up - 100Mbps/Full - flow contr
ol rx/tx
[ 10.707659] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[ 11.121415] r8152 2-2.3:1.0 enx00e1000018de: renamed from eth0
[ 11.167054] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 11.167057] Bluetooth: BNEP filters: protocol multicast
[ 11.167067] Bluetooth: BNEP socket layer initialized
[ 11.314936] rtl8821ae 0000:03:00.0 wlp3s0: renamed from wlan0
[ 11.516542] intel_rapl_common: Found RAPL domain package
[ 11.516548] intel_rapl_common: Found RAPL domain core
[ 11.516549] intel_rapl_common: Found RAPL domain uncore
[ 11.516551] intel_rapl_common: Found RAPL domain dram
[ 17.978320] kauditd_printk_skb: 34 callbacks suppressed
[ 17.978322] audit: type=1400 audit(1587483430.355:46): apparmor="STATUS" oper
ation="profile_load" profile="unconfined" name="docker-default" pid=1108 comm="a
pparmor_parser"
[ 18.420470] rfkill: input handler disabled
[ 19.082003] bridge: filtering via arp/ip/ip6tables is no longer available by
default. Update your scripts to load br_netfilter if you need this.
[ 19.101002] Bridge firewalling registered
[ 19.135237] bpfilter: Loaded bpfilter_umh pid 1231
[ 19.276708] Initializing XFRM netlink socket
[ 20.026461] br-b8fbf8096307: port 1(vetheabdebf) entered blocking state
[ 20.026465] br-b8fbf8096307: port 1(vetheabdebf) entered disabled state
[ 20.034114] device vetheabdebf entered promiscuous mode
[ 20.034403] br-b8fbf8096307: port 1(vetheabdebf) entered blocking state
[ 20.034405] br-b8fbf8096307: port 1(vetheabdebf) entered forwarding state
[ 20.034436] IPv6: ADDRCONF(NETDEV_CHANGE): br-b8fbf8096307: link becomes read
y
[ 20.034545] br-b8fbf8096307: port 1(vetheabdebf) entered disabled state
[ 20.995785] eth0: renamed from vethca032c0
[ 21.009067] IPv6: ADDRCONF(NETDEV_CHANGE): vetheabdebf: link becomes ready
[ 21.009131] br-b8fbf8096307: port 1(vetheabdebf) entered blocking state
[ 21.009133] br-b8fbf8096307: port 1(vetheabdebf) entered forwarding state
[ 22.609505] docker0: port 1(veth9879f34) entered blocking state
[ 22.609509] docker0: port 1(veth9879f34) entered disabled state
[ 22.611060] device veth9879f34 entered promiscuous mode
[ 22.645092] hassio: port 1(vethadd7d37) entered blocking state
[ 22.645096] hassio: port 1(vethadd7d37) entered disabled state
[ 22.645170] device vethadd7d37 entered promiscuous mode
[ 22.645556] hassio: port 1(vethadd7d37) entered blocking state
[ 22.645559] hassio: port 1(vethadd7d37) entered forwarding state
[ 22.645628] hassio: port 1(vethadd7d37) entered disabled state
[ 23.063894] eth0: renamed from veth706d661
[ 23.079470] IPv6: ADDRCONF(NETDEV_CHANGE): veth9879f34: link becomes ready
[ 23.079580] docker0: port 1(veth9879f34) entered blocking state
[ 23.079582] docker0: port 1(veth9879f34) entered forwarding state
[ 23.079628] IPv6: ADDRCONF(NETDEV_CHANGE): docker0: link becomes ready
[ 23.232534] eth1: renamed from veth8454163
[ 23.251760] IPv6: ADDRCONF(NETDEV_CHANGE): vethadd7d37: link becomes ready
[ 23.251850] hassio: port 1(vethadd7d37) entered blocking state
[ 23.251854] hassio: port 1(vethadd7d37) entered forwarding state
[ 23.251925] IPv6: ADDRCONF(NETDEV_CHANGE): hassio: link becomes ready
[ 23.616149] udevd[180]: starting version 3.2.9
[ 23.627291] udevd[181]: starting eudev-3.2.9
[ 26.462413] audit: type=1400 audit(1587483438.839:47): apparmor="STATUS" oper
ation="profile_replace" info="same as current profile, skipping" profile="unconf
ined" name="hassio-supervisor" pid=2009 comm="apparmor_parser"
[ 26.462422] audit: type=1400 audit(1587483438.839:48): apparmor="STATUS" oper
ation="profile_replace" info="same as current profile, skipping" profile="unconf
ined" name="hassio-supervisor///usr/bin/gdbus" pid=2009 comm="apparmor_parser"
[ 26.462426] audit: type=1400 audit(1587483438.839:49): apparmor="STATUS" oper
ation="profile_replace" info="same as current profile, skipping" profile="unconf
ined" name="hassio-supervisor///usr/bin/git" pid=2009 comm="apparmor_parser"
[ 26.462430] audit: type=1400 audit(1587483438.839:50): apparmor="STATUS" oper
ation="profile_replace" info="same as current profile, skipping" profile="unconf
ined" name="hassio-supervisor///usr/bin/socat" pid=2009 comm="apparmor_parser"
[ 27.005824] hassio: port 2(veth9aae247) entered blocking state
[ 27.005828] hassio: port 2(veth9aae247) entered disabled state
[ 27.010460] device veth9aae247 entered promiscuous mode
[ 27.138257] hassio: port 3(veth8537958) entered blocking state
[ 27.138261] hassio: port 3(veth8537958) entered disabled state
[ 27.150151] device veth8537958 entered promiscuous mode
[ 27.160039] hassio: port 3(veth8537958) entered blocking state
[ 27.160044] hassio: port 3(veth8537958) entered forwarding state
[ 27.295709] hassio: port 4(veth9b00a48) entered blocking state
[ 27.295713] hassio: port 4(veth9b00a48) entered disabled state
[ 27.296231] device veth9b00a48 entered promiscuous mode
[ 27.296387] hassio: port 4(veth9b00a48) entered blocking state
[ 27.296389] hassio: port 4(veth9b00a48) entered forwarding state
[ 27.954957] hassio: port 3(veth8537958) entered disabled state
[ 27.955069] hassio: port 4(veth9b00a48) entered disabled state
[ 28.491556] eth0: renamed from vetha41e4f6
[ 28.524455] IPv6: ADDRCONF(NETDEV_CHANGE): veth8537958: link becomes ready
[ 28.524528] hassio: port 3(veth8537958) entered blocking state
[ 28.524531] hassio: port 3(veth8537958) entered forwarding state
[ 28.596025] eth0: renamed from vethc1af65c
[ 28.607568] IPv6: ADDRCONF(NETDEV_CHANGE): veth9aae247: link becomes ready
[ 28.607649] hassio: port 2(veth9aae247) entered blocking state
[ 28.607654] hassio: port 2(veth9aae247) entered forwarding state
[ 28.686056] eth0: renamed from veth7b6afc9
[ 28.703874] IPv6: ADDRCONF(NETDEV_CHANGE): veth9b00a48: link becomes ready
[ 28.703963] hassio: port 4(veth9b00a48) entered blocking state
[ 28.703965] hassio: port 4(veth9b00a48) entered forwarding state
[ 29.458347] udevd[322]: starting version 3.2.9
[ 29.471385] udevd[323]: starting eudev-3.2.9
[ 30.973286] hassio: port 5(veth9fb6ea5) entered blocking state
[ 30.973291] hassio: port 5(veth9fb6ea5) entered disabled state
[ 30.977414] device veth9fb6ea5 entered promiscuous mode
[ 31.165375] hassio: port 6(veth87623dd) entered blocking state
[ 31.165380] hassio: port 6(veth87623dd) entered disabled state
[ 31.165715] device veth87623dd entered promiscuous mode
[ 31.165942] hassio: port 6(veth87623dd) entered blocking state
[ 31.165944] hassio: port 6(veth87623dd) entered forwarding state
[ 31.287904] hassio: port 7(veth94dd1ee) entered blocking state
[ 31.287910] hassio: port 7(veth94dd1ee) entered disabled state
[ 31.290153] device veth94dd1ee entered promiscuous mode
[ 31.291528] hassio: port 7(veth94dd1ee) entered blocking state
[ 31.291533] hassio: port 7(veth94dd1ee) entered forwarding state
[ 31.986961] hassio: port 6(veth87623dd) entered disabled state
[ 31.987080] hassio: port 7(veth94dd1ee) entered disabled state
[ 32.195425] eth0: renamed from veth810e23c
[ 32.215701] IPv6: ADDRCONF(NETDEV_CHANGE): veth9fb6ea5: link becomes ready
[ 32.215792] hassio: port 5(veth9fb6ea5) entered blocking state
[ 32.215795] hassio: port 5(veth9fb6ea5) entered forwarding state
[ 32.347954] eth0: renamed from veth4847345
[ 32.367486] IPv6: ADDRCONF(NETDEV_CHANGE): veth94dd1ee: link becomes ready
[ 32.367556] hassio: port 7(veth94dd1ee) entered blocking state
[ 32.367560] hassio: port 7(veth94dd1ee) entered forwarding state
[ 32.515726] eth0: renamed from veth585c35d
[ 32.543726] IPv6: ADDRCONF(NETDEV_CHANGE): veth87623dd: link becomes ready
[ 32.543802] hassio: port 6(veth87623dd) entered blocking state
[ 32.543807] hassio: port 6(veth87623dd) entered forwarding state
[ 38.652079] hassio: port 8(veth8d2816d) entered blocking state
[ 38.652083] hassio: port 8(veth8d2816d) entered disabled state
[ 38.652174] device veth8d2816d entered promiscuous mode
[ 38.925531] hassio: port 9(veth14eb76d) entered blocking state
[ 38.925535] hassio: port 9(veth14eb76d) entered disabled state
[ 38.928108] device veth14eb76d entered promiscuous mode
[ 38.929815] hassio: port 9(veth14eb76d) entered blocking state
[ 38.929819] hassio: port 9(veth14eb76d) entered forwarding state
[ 39.027471] hassio: port 10(veth3e500bc) entered blocking state
[ 39.027475] hassio: port 10(veth3e500bc) entered disabled state
[ 39.027612] device veth3e500bc entered promiscuous mode
[ 39.027742] hassio: port 10(veth3e500bc) entered blocking state
[ 39.027744] hassio: port 10(veth3e500bc) entered forwarding state
[ 39.178502] hassio: port 11(veth958363d) entered blocking state
[ 39.178507] hassio: port 11(veth958363d) entered disabled state
[ 39.187619] device veth958363d entered promiscuous mode
[ 39.213435] hassio: port 11(veth958363d) entered blocking state
[ 39.213440] hassio: port 11(veth958363d) entered forwarding state
[ 39.399779] hassio: port 12(veth2c25631) entered blocking state
[ 39.399784] hassio: port 12(veth2c25631) entered disabled state
[ 39.431235] device veth2c25631 entered promiscuous mode
[ 39.511959] hassio: port 12(veth2c25631) entered blocking state
[ 39.511963] hassio: port 12(veth2c25631) entered forwarding state
[ 39.666938] hassio: port 9(veth14eb76d) entered disabled state
[ 39.667057] hassio: port 10(veth3e500bc) entered disabled state
[ 39.667124] hassio: port 11(veth958363d) entered disabled state
[ 39.667174] hassio: port 12(veth2c25631) entered disabled state
[ 42.209416] eth0: renamed from veth3ba2e26
[ 42.232559] IPv6: ADDRCONF(NETDEV_CHANGE): veth8d2816d: link becomes ready
[ 42.232635] hassio: port 8(veth8d2816d) entered blocking state
[ 42.232639] hassio: port 8(veth8d2816d) entered forwarding state
[ 42.420040] eth0: renamed from vetha383fde
[ 42.450204] eth0: renamed from veth8d34a02
[ 42.468389] IPv6: ADDRCONF(NETDEV_CHANGE): veth14eb76d: link becomes ready
[ 42.468475] hassio: port 9(veth14eb76d) entered blocking state
[ 42.468478] hassio: port 9(veth14eb76d) entered forwarding state
[ 42.487024] IPv6: ADDRCONF(NETDEV_CHANGE): veth2c25631: link becomes ready
[ 42.487107] hassio: port 12(veth2c25631) entered blocking state
[ 42.487110] hassio: port 12(veth2c25631) entered forwarding state
[ 42.591725] eth0: renamed from veth85a4be3
[ 42.604134] IPv6: ADDRCONF(NETDEV_CHANGE): veth958363d: link becomes ready
[ 42.604220] hassio: port 11(veth958363d) entered blocking state
[ 42.604225] hassio: port 11(veth958363d) entered forwarding state
[ 42.688849] eth0: renamed from vethf9c2332
[ 42.706213] IPv6: ADDRCONF(NETDEV_CHANGE): veth3e500bc: link becomes ready
[ 42.706295] hassio: port 10(veth3e500bc) entered blocking state
[ 42.706302] hassio: port 10(veth3e500bc) entered forwarding state
[ 49.107833] udevd[181]: starting version 3.2.9
[ 49.115245] udevd[182]: starting eudev-3.2.9
[ 139.486347] hassio: port 13(veth2e93740) entered blocking state
[ 139.486351] hassio: port 13(veth2e93740) entered disabled state
[ 139.492534] device veth2e93740 entered promiscuous mode
[ 139.495587] IPv6: ADDRCONF(NETDEV_CHANGE): veth2e93740: link becomes ready
[ 139.495662] hassio: port 13(veth2e93740) entered blocking state
[ 139.495664] hassio: port 13(veth2e93740) entered forwarding state
[ 139.495700] IPv6: ADDRCONF(NETDEV_CHANGE): veth57b4f09: link becomes ready
[ 139.786913] hassio: port 14(veth7d3aa09) entered blocking state
[ 139.786918] hassio: port 14(veth7d3aa09) entered disabled state
[ 139.788530] device veth7d3aa09 entered promiscuous mode
[ 139.807216] hassio: port 14(veth7d3aa09) entered blocking state
[ 139.807221] hassio: port 14(veth7d3aa09) entered forwarding state
[ 139.850030] IPv6: ADDRCONF(NETDEV_CHANGE): veth7d3aa09: link becomes ready
[ 141.950413] hassio: port 14(veth7d3aa09) entered disabled state
[ 141.960305] eth0: renamed from veth96b5639
[ 141.985174] hassio: port 14(veth7d3aa09) entered blocking state
[ 141.985179] hassio: port 14(veth7d3aa09) entered forwarding state
[ 142.252796] hassio: port 13(veth2e93740) entered disabled state
[ 142.270144] eth0: renamed from veth57b4f09
[ 142.282448] hassio: port 13(veth2e93740) entered blocking state
[ 142.282456] hassio: port 13(veth2e93740) entered forwarding state
[ 152.095427] rfkill: input handler enabled
[ 153.627928] Bluetooth: RFCOMM TTY layer initialized
[ 153.627938] Bluetooth: RFCOMM socket layer initialized
[ 153.627945] Bluetooth: RFCOMM ver 1.11
[ 165.098373] rfkill: input handler disabled
[ 553.454618] rfkill: input handler enabled
[ 560.469931] rfkill: input handler disabled
[ 860.055088] perf: interrupt took too long (2523 > 2500), lowering kernel.perf
_event_max_sample_rate to 79250
alsa-base.conf:
# autoloader aliases
install sound-slot-0 /sbin/modprobe snd-card-0
install sound-slot-1 /sbin/modprobe snd-card-1
install sound-slot-2 /sbin/modprobe snd-card-2
install sound-slot-3 /sbin/modprobe snd-card-3
install sound-slot-4 /sbin/modprobe snd-card-4
install sound-slot-5 /sbin/modprobe snd-card-5
install sound-slot-6 /sbin/modprobe snd-card-6
install sound-slot-7 /sbin/modprobe snd-card-7
# Cause optional modules to be loaded above generic modules
install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist snd-ioctl32 ; /sbin/modprobe --quiet
--use-blacklist snd-seq ; }
#
# Workaround at bug #499695 (reverted in Ubuntu see LP #319505)
install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist snd-pcm-oss ; : ; }
install snd-mixer /sbin/modprobe --ignore-install snd-mixer $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist snd-mixer-oss ; : ; }
install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist snd-seq-midi ; /sbin/modprobe --quiet
--use-blacklist snd-seq-oss ; : ; }
#
install snd-rawmidi /sbin/modprobe --ignore-install snd-rawmidi $CMDLINE_OPTS
&& { /sbin/modprobe --quiet --use-blacklist snd-seq-midi ; : ; }
# Cause optional modules to be loaded above sound card driver modules
install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1 $CMDLINE_OPTS
&& { /sbin/modprobe --quiet --use-blacklist snd-emu10k1-synth ; }
install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx $CMDLINE_OPTS
&& { /sbin/modprobe --quiet --use-blacklist snd-seq ; }
# Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS && {
/sbin/modprobe --quiet --use-blacklist saa7134-alsa ; : ; }
# Prevent abnormal drivers from grabbing index 0
options bt87x index=-2
options cx88_alsa index=-2
options saa7134-alsa index=-2
options snd-atiixp-modem index=-2
options snd-intel8x0m index=-2
options snd-via82xx-modem index=-2
options snd-usb-audio index=-2
options snd-usb-caiaq index=-2
options snd-usb-ua101 index=-2
options snd-usb-us122l index=-2
options snd-usb-usx2y index=-2
# Ubuntu #62691, enable MPU for snd-cmipci
options snd-cmipci mpu_port=0x330 fm_port=0x388
# Keep snd-pcsp from being loaded as first soundcard
options snd-pcsp index=-2
# Keep snd-usb-audio from beeing loaded as first soundcard
options snd-usb-audio index=-2
options snd-hda-intel dmic_detect=0
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1864061
Title:
PCI/internal sound card not detected
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1864061/+subscriptions
--
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
