------- Comment From heinz-werner_se...@de.ibm.com 2020-02-03 07:03 EDT------- Retest by doing an "apt upgrade" which provided
root@t35lp36:~# apt list --installed s390-tools Listing... Done s390-tools/focal,now 2.12.0-0ubuntu1 s390x [installed] root@t35lp36:~# When trying to IPL with the HMC setting "Enable Secure Boot for Linux" selected, the system did not start. HMC messages are: Preparing system. Starting system. System version 8. Watchdog enabled. Running 'ZBootLoader' version '1.0.0' level 'D41C.D41C_0013'. ZBootLoader 2.0.0. MLOLOA6269050E Secure IPL: Execute entry does not point to the beginning of a si gned component on device HBA=0.0.1900, WWPN=500507630B01C320, LUN=40504047000000 00. IPL failed. With the setting "secure=1" in /etc/zipl.conf, the zipl command yields the following output: root@t35lp36:/# zipl -V Using config file '/etc/zipl.conf' Run /lib/s390-tools/zipl_helper.device-mapper /boot Target device information Device..........................: fd:00 *) Partition.......................: fd:01 Device name.....................: dm-0 Device driver name..............: device-mapper Type............................: disk partition Disk layout.....................: SCSI disk layout *) Geometry - start................: 2048 *) File system block size..........: 4096 Physical block size.............: 512 *) Device size in physical blocks..: 37746688 *) Data provided by script. Building bootmap in '/boot' Building menu 'menu' Adding #1: IPL section 'ubuntu' (default) initial ramdisk...: /boot/initrd.img kernel image......: /boot/vmlinuz kernel parmline...: 'root=UUID=dc6b7633-49f0-4095-8c35-678cbc212ca5 crashkernel=196M' component address: heap area.......: 0x00002000-0x00005fff stack area......: 0x0000f000-0x0000ffff internal loader.: 0x0000a000-0x0000dfff parameters......: 0x00009000-0x000091ff kernel image....: 0x00010000-0x007d8fff parmline........: 0x007da000-0x007da1ff initial ramdisk.: 0x007e0000-0x01a883ff Adding #2: IPL section 'old' initial ramdisk...: /boot/initrd.img.old kernel image......: /boot/vmlinuz.old kernel parmline...: 'root=UUID=dc6b7633-49f0-4095-8c35-678cbc212ca5 crashkernel=196M' component address: heap area.......: 0x00002000-0x00005fff stack area......: 0x0000f000-0x0000ffff internal loader.: 0x0000a000-0x0000dfff parameters......: 0x00009000-0x000091ff kernel image....: 0x00010000-0x007d7fff parmline........: 0x007d9000-0x007d91ff initial ramdisk.: 0x007e0000-0x01a865ff Preparing boot device: dm-0. Detected SCSI PCBIOS disk layout. Writing SCSI master boot record. Syncing disks... Done. root@t35lp36:/# In this output there is no line that reads "signature for ..." which leads to the assumption that the Ubuntu kernel is not (yet) signed. root@t35lp36:~# uname -a Linux t35lp36 5.4.0-12-generic #15-Ubuntu SMP Tue Jan 21 17:56:00 UTC 2020 s390x s390x s390x GNU/Linux root@t35lp36:~# I tried the former kernel 5.4.0-9-generic too but the result is just the same. So the fix cannot be tested with the "as-is" distro kernels. -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1860531 Title: IPL on z15 always performed regardless of the secure-boot related settings To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu-z-systems/+bug/1860531/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs