** Description changed: [Impact] Flow control parameters of fibre port can not be set after enable flow control autoneg, as flow control autoneg is unsupported for fibre port [Test Case] + Turning on/off tx pause and ethtool shall report status accordingly. [Fix] fb89629f2ecf net: hns3: fix flow control configure issue for fibre port [Regression Risk] Patch restricted to hns3 driver. - "[Bug Description] Flow control parameters of fibre port can not be set after enable flow control autoneg, as flow control autoneg is unsupported for fibre port. [Steps to Reproduce] 1.link up fibre port and enable flow control autoneg 2.check status of tx pause and rx pause 3.turn off tx pause 4.checkout status of tx pause [Actual Results] tx pause is on [Expected Results] tx pause is off [Reproducibility] Inevitably [Additional information] Hardware: D06 Firmware: NA Kernel: NA [Resolution] This patch return -EOPNOTSUPP when user tries to enable flow control autoneg." net: hns3: fix flow control configure issue for fibre port
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1853948 Title: [hns-1126]net: hns3: fix flow control configure issue for fibre port To manage notifications about this bug go to: https://bugs.launchpad.net/kunpeng920/+bug/1853948/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
