Not sure, but i have a similar problem here, while mounting my camera. I recently upgraded to 7.10, but that kernel did not work. Now i use an older kernel, the 2.6.20-16-386 Kernel. Output of dmesg:
[ 141.868000] usb 2-1: new full speed USB device using uhci_hcd and address 2 [ 142.040000] usb 2-1: configuration #1 chosen from 1 choice [ 142.204000] usbcore: registered new interface driver libusual [ 142.348000] Initializing USB Mass Storage driver... [ 142.352000] scsi0 : SCSI emulation for USB Mass Storage devices [ 142.352000] usb-storage: device found at 2 [ 142.352000] usb-storage: waiting for device to settle before scanning [ 142.356000] usbcore: registered new interface driver usb-storage [ 142.356000] USB Mass Storage support registered. [ 147.352000] usb-storage: device scan complete [ 147.356000] scsi 0:0:0:0: Direct-Access KM DiMAGE Z6 1.00 PQ: 0 ANSI: 0 CCS [ 147.424000] SCSI device sda: 4022045 512-byte hdwr sectors (2059 MB) [ 147.428000] sda: Write Protect is off [ 147.428000] sda: Mode Sense: 02 00 00 00 [ 147.428000] sda: assuming drive cache: write through [ 147.436000] SCSI device sda: 4022045 512-byte hdwr sectors (2059 MB) [ 147.440000] sda: Write Protect is off [ 147.440000] sda: Mode Sense: 02 00 00 00 [ 147.440000] sda: assuming drive cache: write through [ 147.440000] sda: sda1 [ 148.132000] sda: p1 exceeds device capacity [ 148.136000] sd 0:0:0:0: Attached scsi removable disk sda [ 148.216000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 149.916000] attempt to access beyond end of device [ 149.916000] sda: rw=0, want=4022116, limit=4022045 [ 149.916000] Buffer I/O error on device sda1, logical block 4021888 [ 149.916000] attempt to access beyond end of device [ 149.916000] sda: rw=0, want=4022117, limit=4022045 [ 149.916000] Buffer I/O error on device sda1, logical block 4021889 [ 149.916000] attempt to access beyond end of device [ 149.916000] sda: rw=0, want=4022118, limit=4022045 [ 149.916000] Buffer I/O error on device sda1, logical block 4021890 [ 149.916000] attempt to access beyond end of device [ 149.916000] sda: rw=0, want=4022119, limit=4022045 [ 149.916000] Buffer I/O error on device sda1, logical block 4021891 [ 149.916000] attempt to access beyond end of device [ 149.916000] sda: rw=0, want=4022120, limit=4022045 [ 149.916000] Buffer I/O error on device sda1, logical block 4021892 [ 149.920000] attempt to access beyond end of device [ 149.920000] sda: rw=0, want=4022121, limit=4022045 [ 149.920000] Buffer I/O error on device sda1, logical block 4021893 [ 149.920000] attempt to access beyond end of device [ 149.920000] sda: rw=0, want=4022122, limit=4022045 Are there any workarounds yet? -- pata driver in libata is thwarted by HPA https://bugs.launchpad.net/bugs/82314 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
