Launchpad has imported 16 comments from the remote bug at https://bugzilla.redhat.com/show_bug.cgi?id=451188.
If you reply to an imported comment from within Launchpad, your comment will be sent to the remote bug automatically. Read more about Launchpad's inter-bugtracker facilities at https://help.launchpad.net/InterBugTracking. ------------------------------------------------------------------------ On 2008-06-13T09:57:21+00:00 shr wrote: Description of problem: Fedora 9 use the "new" Real Time Clock Driver (Device Drivers ---> Real Time Clock), but it don't work on HP DL380 G4/G5. I don't know Version-Release number of selected component (if applicable): All the kernel released for Fedora 9 (kernel-2.6.25-14.fc9.x86_64 ~ kernel-2.6.25.4-30.fc9.x86_64) How reproducible: Install Fedora9 on HP DL380 G4/G5 Steps to Reproduce: 1. Just install Fedora9 on HP DL380 G4/G5 2. 3. Actual results: /dev/rtc0 won't be created. Expected results: /dev/rtc0 will be created and a symbolic link /dev/rtc will link to /dev/rtc0 Additional info: It will work with "old" Real Time Clock driver, (Device Drivers ---> Character devices ---> Enhanced Real Time Clock Support (and Generic /dev/rtc emulation) ). If "new" Real Time Clock Driver won't work on HP DL380 G4/G5 even in the future, could you please compile the "old" Real Time Clock driver as module? Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/0 ------------------------------------------------------------------------ On 2008-06-14T08:32:32+00:00 Chuck wrote: Are there any error messages in the log about the driver not loading/working? Does the output of 'lsmod' show it is loaded? Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/1 ------------------------------------------------------------------------ On 2008-06-16T06:28:02+00:00 shr wrote: I don't know how to get the right information, could you please tell me what information I can provide and how can I get it(what command should I execute) to help solve this problem? It is ok If you need all the output of dmesg and lsmod. (about 578 + 48 lines) Following is the information I can get. Fedora 9 On HP DL380G4 (use new rtc driver and don't work) # ls -al /dev/rtc* ls: cannot access /dev/rtc*: No such file or directory # dmesg | grep -i rtc <nothing> #lsmod | grep -i rtc <nothing> # clock --systohc --debug hwclock from util-linux-ng 2.13.1 hwclock: Open of /dev/rtc failed, errno=2: No such file or directory. No usable clock interface found. Cannot access the Hardware Clock via any known method. Fedora 9 On IBM BladeCenter HS21 (use new rtc driver and working) # ls -al /dev/rtc* lrwxrwxrwx 1 root root 4 2008-06-16 22:07 /dev/rtc -> rtc0 crw-r--r-- 1 root root 254, 0 2008-06-16 22:07 /dev/rtc0 # dmesg | grep -i rtc ACPI: RTC can wake from S4 rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one year #lsmod | grep -i rtc <nothing> Fedora 8 On HP DL380G4 (Use old char -> rtc and working) # ls -alt /dev/rtc* crw-r--r-- 1 root root 10, 135 2008-06-10 20:32 /dev/rtc # dmesg | grep -i rtc <nothing> #lsmod | grep -i rtc <nothing> Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/2 ------------------------------------------------------------------------ On 2008-08-14T04:17:36+00:00 shr wrote: The same for HP DL 360G5, does HP use strange rtc chip on it's Server? Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/3 ------------------------------------------------------------------------ On 2008-09-04T19:23:18+00:00 Chuck wrote: Please post the entire boot messages file (/var/log/dmesg) after booting the broken kernel. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/4 ------------------------------------------------------------------------ On 2008-09-05T09:18:37+00:00 manuel wrote: Although I'm not sure, I think the problem is that the HP servers are not exporting the RTC via PNP. >From ./drivers/rtc/rtc-cmos.c: static const struct pnp_device_id rtc_ids[] = { { .id = "PNP0b00", }, { .id = "PNP0b01", }, { .id = "PNP0b02", }, { }, }; # cat /sys/devices/pnp0/*/id PNP0a03 PNP0c02 IPI0001 PNP0103 PNP0200 PNP0800 PNP0303 PNP0f13 PNP0f0e PNP0a06 PNP0501 PNP0500 dmesg storage1:~ # dmesg Initializing cgroup subsys cpuset Linux version 2.6.25.14-108.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Mon Aug 4 13:46:35 EDT 2008 Command line: ro root=/dev/VolGroup00/LogVol00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000cfe56000 (usable) BIOS-e820: 00000000cfe56000 - 00000000cfe5e000 (ACPI data) BIOS-e820: 00000000cfe5e000 - 00000000cfe5f000 (usable) BIOS-e820: 00000000cfe5f000 - 00000000d0000000 (reserved) BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000022ffff000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 851542) 1 entries of 3200 used Entering add_active_range(0, 851550, 851551) 2 entries of 3200 used Entering add_active_range(0, 1048576, 2293759) 3 entries of 3200 used end_pfn_map = 2293759 DMI 2.4 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT CFE567C0, 0074 (r1 HP ProLiant 2 Ò 162E) ACPI: FACP CFE56840, 00F4 (r3 HP ProLiant 2 Ò 162E) ACPI: DSDT CFE56940, 1FB8 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS CFE56100, 0040 ACPI: SPCR CFE56140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG CFE561C0, 003C (r1 HP ProLiant 1 0) ACPI: HPET CFE56200, 0038 (r1 HP ProLiant 2 Ò 162E) ACPI: SPMI CFE56240, 0040 (r5 HP ProLiant 1 Ò 162E) ACPI: ERST CFE56280, 01D0 (r1 HP ProLiant 1 Ò 162E) ACPI: APIC CFE56480, 009E (r1 HP ProLiant 2 0) ACPI: FFFF CFE56540, 0176 (r1 HP ProLiant 1 Ò 162E) ACPI: BERT CFE566C0, 0030 (r1 HP ProLiant 1 Ò 162E) ACPI: HEST CFE56700, 00BC (r1 HP ProLiant 1 Ò 162E) No NUMA configuration found Faking a node at 0000000000000000-000000022ffff000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 851542) 1 entries of 3200 used Entering add_active_range(0, 851550, 851551) 2 entries of 3200 used Entering add_active_range(0, 1048576, 2293759) 3 entries of 3200 used Bootmem setup node 0 0000000000000000-000000022ffff000 NODE_DATA [0000000000012000 - 0000000000019fff] bootmap [000000000001a000 - 000000000005ffff] pages 46 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-75223b] TEXT DATA BSS early res: 3 [37c91000-37fefcad] RAMDISK early res: 4 [9f400-a03ff] EBDA early res: 5 [8000-11fff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 [ffffe20003800000-ffffe200039fffff] PMD ->ffff810006e00000 on node 0 [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007200000 on node 0 [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007600000 on node 0 [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810007a00000 on node 0 [ffffe20004000000-ffffe200041fffff] PMD ->ffff810007e00000 on node 0 [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008200000 on node 0 [ffffe20004400000-ffffe200045fffff] PMD ->ffff810008600000 on node 0 [ffffe20004600000-ffffe200047fffff] PMD ->ffff810008a00000 on node 0 [ffffe20004800000-ffffe200049fffff] PMD ->ffff810008e00000 on node 0 [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810009200000 on node 0 [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810009600000 on node 0 [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff810009a00000 on node 0 [ffffe20005000000-ffffe200051fffff] PMD ->ffff810009e00000 on node 0 [ffffe20005200000-ffffe200053fffff] PMD ->ffff81000a200000 on node 0 [ffffe20005400000-ffffe200055fffff] PMD ->ffff81000a600000 on node 0 [ffffe20005600000-ffffe200057fffff] PMD ->ffff81000aa00000 on node 0 [ffffe20005800000-ffffe200059fffff] PMD ->ffff81000ae00000 on node 0 [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff81000b200000 on node 0 [ffffe20005c00000-ffffe20005dfffff] PMD ->ffff81000b600000 on node 0 [ffffe20005e00000-ffffe20005ffffff] PMD ->ffff81000ba00000 on node 0 [ffffe20006000000-ffffe200061fffff] PMD ->ffff81000be00000 on node 0 [ffffe20006200000-ffffe200063fffff] PMD ->ffff81000c200000 on node 0 [ffffe20006400000-ffffe200065fffff] PMD ->ffff81000c600000 on node 0 [ffffe20006600000-ffffe200067fffff] PMD ->ffff81000ca00000 on node 0 [ffffe20006800000-ffffe200069fffff] PMD ->ffff81000ce00000 on node 0 [ffffe20006a00000-ffffe20006bfffff] PMD ->ffff81000d200000 on node 0 [ffffe20006c00000-ffffe20006dfffff] PMD ->ffff81000d600000 on node 0 [ffffe20006e00000-ffffe20006ffffff] PMD ->ffff81000da00000 on node 0 [ffffe20007000000-ffffe200071fffff] PMD ->ffff81000de00000 on node 0 [ffffe20007200000-ffffe200073fffff] PMD ->ffff81000e200000 on node 0 [ffffe20007400000-ffffe200075fffff] PMD ->ffff81000e600000 on node 0 [ffffe20007600000-ffffe200077fffff] PMD ->ffff81000ea00000 on node 0 [ffffe20007800000-ffffe200079fffff] PMD ->ffff81000ee00000 on node 0 [ffffe20007a00000-ffffe20007bfffff] PMD ->ffff81000f200000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2293759 Movable zone start PFN for each node early_node_map[4] active PFN ranges 0: 0 -> 159 0: 256 -> 851542 0: 851550 -> 851551 0: 1048576 -> 2293759 On node 0 totalpages: 2096629 DMA zone: 56 pages used for memmap DMA zone: 1378 pages reserved DMA zone: 2565 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 833167 pages, LIFO batch:31 Normal zone: 17023 pages used for memmap Normal zone: 1228160 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat ACPI: HPET id: 0x8086a201 base: 0xfed00000 Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000cfe56000 - 00000000cfe5e000 PM: Registered nosave memory: 00000000cfe5f000 - 00000000d0000000 PM: Registered nosave memory: 00000000d0000000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000 PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at d1000000 (gap: d0000000:10000000) SMP: Allowing 8 CPUs, 4 hotplug CPUs PERCPU: Allocating 42688 bytes of per cpu data Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2063892 Policy zone: Normal Kernel command line: ro root=/dev/VolGroup00/LogVol00 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 3000.093 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0xf433000 - 0x13433000 Memory: 8193932k/9175036k available (2629k kernel code, 192584k reserved, 1382k data, 352k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1 hpet clockevent registered Calibrating delay using timer specific routine.. 6003.63 BogoMIPS (lpj=3001815) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM2) using mwait in idle threads. ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 20833956 Detected 20.833 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 6000.03 BogoMIPS (lpj=3000016) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 1/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6000.02 BogoMIPS (lpj=3000013) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 1 CPU2: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 6000.04 BogoMIPS (lpj=3000021) CPU: L1 I cache: 32K, L1 D cache: 32K CPU: L2 cache: 4096K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 1 CPU3: Thermal monitoring enabled (TM2) Intel(R) Xeon(R) CPU 5160 @ 3.00GHz stepping 06 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=6224 bytes CPU0 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000001 00000000,00000004 domain 1: span 00000000,0000000f groups: 00000000,00000005 00000000,0000000a domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU1 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000002 00000000,00000008 domain 1: span 00000000,0000000f groups: 00000000,0000000a 00000000,00000005 domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU2 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000004 00000000,00000001 domain 1: span 00000000,0000000f groups: 00000000,00000005 00000000,0000000a domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU3 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000008 00000000,00000002 domain 1: span 00000000,0000000f groups: 00000000,0000000a 00000000,00000005 domain 2: span 00000000,0000000f groups: 00000000,0000000f net_namespace: 1016 bytes Time: 17:00:26 Date: 08/14/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.IPE4.IPE1._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT02.P2P2._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT03._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT04._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT06.NB01._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PT07.NB02._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 *7 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 *7 10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 10 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x71f has been reserved system 00:01: ioport range 0x800-0x83f has been reserved system 00:01: ioport range 0x900-0x97f has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0xca0-0xca1 has been reserved system 00:01: ioport range 0xca4-0xca5 has been reserved system 00:01: ioport range 0x2f8-0x2ff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved system 00:01: iomem range 0xfe000000-0xfebfffff has been reserved PCI: Bridge: 0000:0a:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0a:01.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:0a:02.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:09:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:09:00.3 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: disabled. MEM window: 0xfdf00000-0xfdffffff PREFETCH window: disabled. PCI: Bridge: 0000:00:03.0 IO window: 4000-4fff MEM window: 0xfdd00000-0xfdefffff PREFETCH window: 0x00000000d1000000-0x00000000d10fffff PCI: Bridge: 0000:00:04.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x00000000d1100000-0x00000000d11fffff PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: 0xf8000000-0xf9ffffff PREFETCH window: 0x00000000d1100000-0x00000000d11fffff PCI: Bridge: 0000:04:00.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x00000000d1200000-0x00000000d12fffff PCI: Bridge: 0000:00:07.0 IO window: disabled. MEM window: 0xfa000000-0xfbffffff PREFETCH window: 0x00000000d1200000-0x00000000d12fffff PCI: Bridge: 0000:00:1e.0 IO window: 2000-3fff MEM window: 0xf7e00000-0xf7ffffff PREFETCH window: 0x00000000d8000000-0x00000000dfffffff PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:09:00.0 to 64 ACPI: PCI Interrupt 0000:0a:00.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:0a:00.0 to 64 ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:0a:01.0 to 64 ACPI: PCI Interrupt 0000:0a:02.0[A] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:0a:02.0 to 64 PCI: Setting latency timer of device 0000:09:00.3 to 64 PCI: Setting latency timer of device 0000:00:03.0 to 64 PCI: Setting latency timer of device 0000:00:04.0 to 64 PCI: Setting latency timer of device 0000:00:05.0 to 64 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:00:07.0 to 64 PCI: Setting latency timer of device 0000:04:00.0 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs...<7>Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 0 it is Freeing initrd memory: 3451k freed audit: initializing netlink socket (disabled) type=2000 audit(1218733225.621:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) pci 0000:01:03.0: Boot video device PCI: Setting latency timer of device 0000:00:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:03.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:03.0:pcie00] Allocate Port Service[0000:00:03.0:pcie01] PCI: Setting latency timer of device 0000:00:04.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:04.0:pcie00] Allocate Port Service[0000:00:04.0:pcie01] PCI: Setting latency timer of device 0000:00:05.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:05.0:pcie00] Allocate Port Service[0000:00:05.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] PCI: Setting latency timer of device 0000:00:07.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:00:07.0:pcie00] Allocate Port Service[0000:00:07.0:pcie01] PCI: Setting latency timer of device 0000:09:00.0 to 64 Allocate Port Service[0000:09:00.0:pcie11] PCI: Setting latency timer of device 0000:0a:00.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:0a:00.0:pcie21] PCI: Setting latency timer of device 0000:0a:01.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:0a:01.0:pcie21] PCI: Setting latency timer of device 0000:0a:02.0 to 64 assign_interrupt_mode Found MSI capability Allocate Port Service[0000:0a:02.0:pcie21] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:03.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:04.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:05.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:07.0:pcie01 - no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:06 is registered as cooling_device2 ACPI: ACPI0007:07 is registered as cooling_device3 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THM0] (8 C) hpet_resources: 0xfed00000 is busy Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Magic number: 4:827:36 Freeing unused kernel memory: 352k freed Write protecting the kernel read-only data: 1112k ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 32 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 16, io mem 0xf7df0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 17, io base 0x00001020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 19, io base 0x00001060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 ACPI: PCI Interrupt 0000:01:04.4[B] -> GSI 22 (level, low) -> IRQ 22 uhci_hcd 0000:01:04.4: UHCI Host Controller uhci_hcd 0000:01:04.4: new USB bus registered, assigned bus number 6 uhci_hcd 0000:01:04.4: port count misdetected? forcing to 2 ports uhci_hcd 0000:01:04.4: irq 22, io base 0x00003800 usb usb6: configuration #1 chosen from 1 choice hub 6-0:1.0: USB hub found hub 6-0:1.0: 2 ports detected usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb6: Product: UHCI Host Controller usb usb6: Manufacturer: Linux 2.6.25.14-108.fc9.x86_64 uhci_hcd usb usb6: SerialNumber: 0000:01:04.4 SCSI subsystem initialized HP CISS Driver (v 3.6.20) ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 16 (level, low) -> IRQ 16 cciss: MSI-X init failed -22 cciss0: <0x3230> at PCI 0000:06:00.0 IRQ 16 using DAC blocks= 716544402 block_size= 512 heads=255, sectors=32, cylinders=87812 blocks= 716544402 block_size= 512 heads=255, sectors=32, cylinders=87812 cciss/c0d0: p1 p2 p3 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com usb 6-1: new full speed USB device using uhci_hcd and address 2 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1218733227.411:2): selinux=0 auid=4294967295 ses=4294967295 usb 6-1: configuration #1 chosen from 1 choice input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.0/input/input1 input,hidraw0: USB HID v1.01 Keyboard [HP Virtual Keyboard] on usb-0000:01:04.4-1 input: HP Virtual Keyboard as /devices/pci0000:00/0000:00:1e.0/0000:01:04.4/usb6/6-1/6-1:1.1/input/input2 input,hidraw1: USB HID v1.01 Mouse [HP Virtual Keyboard] on usb-0000:01:04.4-1 usb 6-1: New USB device found, idVendor=03f0, idProduct=1027 usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-1: Product: Virtual Keyboard usb 6-1: Manufacturer: HP usb 6-2: new full speed USB device using uhci_hcd and address 3 usb 6-2: configuration #1 chosen from 1 choice hub 6-2:1.0: USB hub found hub 6-2:1.0: 7 ports detected usb 6-2: New USB device found, idVendor=03f0, idProduct=1327 usb 6-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 usb 6-2: Product: Virtual Hub usb 6-2: Manufacturer: HP input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3 ACPI: Power Button (FF) [PWRF] EDAC MC: Ver: 2.1.0 Aug 4 2008 EDAC MC0: Giving out device to 'i5000_edac.c' 'I5000': DEV 0000:00:10.0 EDAC PCI0: Giving out device to module 'i5000_edac' controller 'EDAC PCI controller': DEV '0000:00:10.0' (POLLED) input: PC Speaker as /devices/platform/pcspkr/input/input4 libata version 3.00 loaded. ACPI: PCI Interrupt 0000:01:04.0[A] -> GSI 21 (level, low) -> IRQ 21 hpwdt: New timer passed in is 30 seconds. hp Watchdog Timer Driver: 1.00, timer margin: 30 seconds( nowayout=0). Broadcom NetXtreme II Gigabit Ethernet Driver bnx2 v1.7.4 (February 18, 2008) ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 18 (level, low) -> IRQ 18 ata_piix 0000:00:1f.1: version 2.12 ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 17 (level, low) -> IRQ 17 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 intel_rng: FWH not detected ipmi message handler version 39.1 iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected IPMI System Interface driver. ipmi_si: Trying SMBIOS-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0 ipmi: Found new BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0 ipmi_si: duplicate interface ata1.00: ATAPI: HL-DT-STDVD-ROM GDR-D10N, 3.00, max UDMA/33 eth0: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem f8000000, IRQ 18, node addr 00:17:a4:a9:ce:e4 ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 19 (level, low) -> IRQ 19 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR-D10N 3.00 PQ: 0 ANSI: 5 eth1: Broadcom NetXtreme II BCM5708 1000Base-T (B1) PCI-X 64-bit 133MHz found at mem fa000000, IRQ 19, node addr 00:17:a4:a9:ce:e6 ACPI: PCI Interrupt 0000:01:04.6[A] -> GSI 21 (level, low) -> IRQ 21 ipmi_si: Trying PCI-specified kcs state machine at mem address 0xf7ef0000, slave address 0x0, irq 21 Using irq 21 ipmi: interfacing existing BMC (man_id: 0x00000b, prod_id: 0x0000, dev_id: 0x11) IPMI kcs interface initialized Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 loop: module loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2064376k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2064376k NET: Registered protocol family 10 lo: Disabled Privacy Extensions Ethernet Channel Bonding Driver: v3.2.5 (March 21, 2008) [...] Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/5 ------------------------------------------------------------------------ On 2008-09-16T13:16:18+00:00 shr wrote: Bad news again... In 2.6.25 kernel, I can compile the old rtc driver by myself. In 2.6.26.5 kernel, I can't find the rtc config in Device Drivers -> Character devices anymore... Following is the dmesg on HPDL380 G4 Initializing cgroup subsys cpuset Linux version 2.6.26.3-29.fc9.x86_64 (mockbuild@) (gcc version 4.3.0 20080428 (Red Hat 4.3.0-8) (GCC) ) #1 SMP Wed Sep 3 03:16:37 EDT 2008 Command line: ro root=/dev/VolGroup00/LogVol00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable) BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data) BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000021bfff000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 25600 used Entering add_active_range(0, 256, 917491) 1 entries of 25600 used Entering add_active_range(0, 1048576, 2211839) 2 entries of 25600 used max_pfn_mapped = 2211839 x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 init_memory_mapping DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT DFFF3300, 004C (r1 HP P51 2 � 162E) ACPI: FACP DFFF3380, 00F4 (r3 HP P51 2 � 162E) ACPI: DSDT DFFF3480, 2DAB (r1 HP DSDT 1 INTL 20030228) ACPI: FACS DFFF3100, 0040 ACPI: SPCR DFFF3140, 0050 (r1 HP SPCRRBSU 1 � 162E) ACPI: MCFG DFFF31C0, 003C (r1 HP ProLiant 1 0) ACPI: APIC DFFF3200, 00C2 (r1 HP 00000083 2 0) ACPI: SSDT DFFF8000, 04C9 (r1 HP SSDTP 1 INTL 20030228) No NUMA configuration found Faking a node at 0000000000000000-000000021bfff000 Entering add_active_range(0, 0, 159) 0 entries of 25600 used Entering add_active_range(0, 256, 917491) 1 entries of 25600 used Entering add_active_range(0, 1048576, 2211839) 2 entries of 25600 used Bootmem setup node 0 0000000000000000-000000021bfff000 NODE_DATA [0000000000012000 - 0000000000026fff] bootmap [0000000000027000 - 000000000006a7ff] pages 44 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] TRAMPOLINE early res: 2 [200000-84a54b] TEXT DATA BSS early res: 3 [37c90000-37fef058] RAMDISK early res: 4 [9f400-fffff] BIOS reserved early res: 5 [8000-11fff] PGTABLE [ffffe20000000000-ffffe20002dfffff] PMD -> [ffff810001200000-ffff810003ffffff] on node 0 [ffffe20002e00000-ffffe200077fffff] PMD -> [ffff81000c000000-ffff8100103fffff] on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 2211839 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 917491 0: 1048576 -> 2211839 On node 0 totalpages: 2080657 DMA zone: 56 pages used for memmap DMA zone: 1721 pages reserved DMA zone: 2222 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 899115 pages, LIFO batch:31 Normal zone: 15904 pages used for memmap Normal zone: 1147359 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 0, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 0, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 10, version 0, address 0xfec80400, GSI 48-71 ACPI: IOAPIC (id[0x0b] address[0xfec84000] gsi_base[72]) IOAPIC[3]: apic_id 11, version 0, address 0xfec84000, GSI 72-95 ACPI: IOAPIC (id[0x0c] address[0xfec84400] gsi_base[96]) IOAPIC[4]: apic_id 12, version 0, address 0xfec84400, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000dfff3000 - 00000000dfffb000 PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) SMP: Allowing 8 CPUs, 4 hotplug CPUs PERCPU: Allocating 45104 bytes of per cpu data NR_CPUS: 64, nr_cpu_ids: 8 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2048696 Policy zone: Normal Kernel command line: ro root=/dev/VolGroup00/LogVol00 Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 3600.126 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0x4000000 - 0x8000000 Memory: 8129160k/8847356k available (2699k kernel code, 193468k reserved, 1485k data, 980k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 Calibrating delay using timer specific routine.. 7204.34 BogoMIPS (lpj=3602172) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct Initializing cgroup subsys devices CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) using mwait in idle threads. ACPI: Core revision 20080321 CPU0: Intel(R) Xeon(TM) CPU 3.60GHz stepping 0a Using local APIC timer interrupts. APIC timer calibration result 12500453 Detected 12.500 MHz APIC timer. Booting processor 1/6 ip 6000 Initializing CPU#1 Calibrating delay using timer specific routine.. 7200.15 BogoMIPS (lpj=3600079) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 1/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106 CPU1: Intel(R) Xeon(TM) CPU 3.60GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/1 ip 6000 Initializing CPU#2 Calibrating delay using timer specific routine.. 7200.13 BogoMIPS (lpj=3600066) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106 CPU2: Intel(R) Xeon(TM) CPU 3.60GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/7 ip 6000 Initializing CPU#3 Calibrating delay using timer specific routine.. 7200.20 BogoMIPS (lpj=3600101) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 2048K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU3: Thermal monitoring enabled (TM1) x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106 CPU3: Intel(R) Xeon(TM) CPU 3.60GHz stepping 0a checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs Total of 4 processors activated (28804.83 BogoMIPS). sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=232 bytes sizeof(task_struct)=5792 bytes CPU0 attaching sched-domain: domain 0: span 0,2 groups: 0 2 domain 1: span 0-3 groups: 0,2 1,3 domain 2: span 0-3 groups: 0-3 CPU1 attaching sched-domain: domain 0: span 1,3 groups: 1 3 domain 1: span 0-3 groups: 1,3 0,2 domain 2: span 0-3 groups: 0-3 CPU2 attaching sched-domain: domain 0: span 0,2 groups: 2 0 domain 1: span 0-3 groups: 0,2 1,3 domain 2: span 0-3 groups: 0-3 CPU3 attaching sched-domain: domain 0: span 1,3 groups: 3 1 domain 1: span 0-3 groups: 1,3 0,2 domain 2: span 0-3 groups: 0-3 net_namespace: 1224 bytes Booting paravirtualized kernel on bare hardware Time: 20:14:40 Date: 09/16/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support. PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 for base access PCI: HP ProLiant DL380 detected, enabling pci=bfsort. mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0900-097f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0800-083f claimed by ICH4 GPIO pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:02:00.2: PXH quirk detected; SHPC device MSI disabled pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXD._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x71f has been reserved system 00:01: ioport range 0x800-0x83f has been reserved system 00:01: ioport range 0x900-0x97f has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0x2f8-0x2ff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: 0xfdd00000-0xfddfffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.2 IO window: 4000-4fff MEM window: 0xfde00000-0xfdefffff PREFETCH window: 0x00000000f0000000-0x00000000f00fffff PCI: Bridge: 0000:00:02.0 IO window: 4000-4fff MEM window: 0xfdd00000-0xfdefffff PREFETCH window: 0x00000000f0000000-0x00000000f00fffff PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.2 IO window: 5000-5fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x00000000f0100000-0x00000000f01fffff PCI: Bridge: 0000:00:06.0 IO window: 5000-5fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x00000000f0100000-0x00000000f01fffff PCI: Bridge: 0000:00:1e.0 IO window: 1000-2fff MEM window: 0xfbf00000-0xfcffffff PREFETCH window: 0x00000000f0200000-0x00000000f02fffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.2 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:05:00.0 to 64 PCI: Setting latency timer of device 0000:05:00.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered NET: Registered protocol family 1 checking if image is initramfs... it is Freeing initrd memory: 3452k freed audit: initializing netlink socket (disabled) type=2000 audit(1221596079.698:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) msgmni has been set to 15884 SELinux: Registering netfilter hooks Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 ACPI: Power Button (FF) [PWRF] ACPI: SSDT DFFF9000, 02DA (r1 HP SSDT0 1 INTL 20030228) ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: SSDT DFFF9300, 02DA (r1 HP SSDT1 1 INTL 20030228) ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: SSDT DFFFA200, 02DA (r1 HP SSDT6 1 INTL 20030228) ACPI: ACPI0007:06 is registered as cooling_device2 ACPI: SSDT DFFFA500, 02DA (r1 HP SSDT7 1 INTL 20030228) ACPI: ACPI0007:07 is registered as cooling_device3 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THM0] (8 C) Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 0 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /devices/virtual/input/input1 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid usbhid: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 17 registered taskstats version 1 Magic number: 8:510:245 Freeing unused kernel memory: 980k freed Write protecting the kernel read-only data: 3848k ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbef0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00003000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00003020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00003040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00003060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.26.3-29.fc9.x86_64 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 SCSI subsystem initialized HP CISS Driver (v 3.6.20) ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 51 (level, low) -> IRQ 51 input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input3 cciss0: <0x46> at PCI 0000:04:03.0 IRQ 51 using DAC blocks= 1433700592 block_size= 512 heads=255, sectors=32, cylinders=175699 blocks= 1433700592 block_size= 512 heads=255, sectors=32, cylinders=175699 cciss/c0d0: p1 p2 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1221596081.589:2): selinux=0 auid=4294967295 ses=4294967295 iTCO_vendor_support: vendor-support=0 EDAC MC: Ver: 2.1.0 Sep 3 2008 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden input: PC Speaker as /devices/platform/pcspkr/input/input4 libata version 3.00 loaded. intel_rng: FWH not detected ata_piix 0000:00:1f.1: version 2.12 ata_piix 0000:00:1f.1: enabling device (0005 -> 0007) ACPI: Unable to derive IRQ for device 0000:00:1f.1 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI Copyright (c) 1999-2006 Intel Corporation. ata1.00: ATAPI: DV-28E-N, C.6B, max UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM TEAC DV-28E-N C.6B PQ: 0 ANSI: 5 hpwdt 0000:01:04.0: This server does not have an iLO2 ASIC. tg3.c:v3.92.1 (June 9, 2008) ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 25 (level, low) -> IRQ 25 eth0: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:77:36:9f eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[0] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 26 (level, low) -> IRQ 26 eth1: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:18:71:77:36:9e eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:0a:01.0[A] -> GSI 97 (level, low) -> IRQ 97 e1000: 0000:0a:01.0: e1000_probe: (PCI-X:133MHz:64-bit) 00:11:0a:63:6a:62 e1000: eth2: e1000_probe: Intel(R) PRO/1000 Network Connection ACPI: PCI Interrupt 0000:0a:01.1[B] -> GSI 98 (level, low) -> IRQ 98 e1000: 0000:0a:01.1: e1000_probe: (PCI-X:133MHz:64-bit) 00:11:0a:63:6a:63 e1000: eth3: e1000_probe: Intel(R) PRO/1000 Network Connection Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 sr 0:0:0:0: Attached scsi generic sg0 type 5 device-mapper: multipath: version 1.0.5 loaded loop: module loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/6 ------------------------------------------------------------------------ On 2008-09-18T01:26:45+00:00 shr wrote: The same problem exists on HP blade server, maybe on MOST of HP servers... HP PC like dc7800/dc7600 and NB like Compaq 6910p don't have this problem. The following is working OLD rtc driver dmesg on HP DL380G4 with Fedora 8 installed, is it helpful? Initializing cgroup subsys cpuset Linux version 2.6.25.6-27.fc8 (mockbuild@x86-2) (gcc version 4.1.2 20070925 (Red Hat 4.1.2-33)) #1 SMP Fri Jun 13 16:17:54 EDT 2008 Command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009f400 (usable) BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable) BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data) BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000019bfff000 (usable) Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917491) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1687551) 2 entries of 3200 used end_pfn_map = 1687551 DMI 2.3 present. ACPI: RSDP 000F4F00, 0024 (r2 HP ) ACPI: XSDT DFFF3300, 0044 (r1 HP P51 2 Ò 162E) ACPI: FACP DFFF3380, 00F4 (r3 HP P51 2 Ò 162E) ACPI: DSDT DFFF3480, 2D62 (r1 HP DSDT 1 INTL 20030228) ACPI: FACS DFFF3100, 0040 ACPI: SPCR DFFF3140, 0050 (r1 HP SPCRRBSU 1 Ò 162E) ACPI: MCFG DFFF31C0, 003C (r1 HP ProLiant 1 0) ACPI: APIC DFFF3200, 00C2 (r1 HP 00000083 2 0) No NUMA configuration found Faking a node at 0000000000000000-000000019bfff000 Entering add_active_range(0, 0, 159) 0 entries of 3200 used Entering add_active_range(0, 256, 917491) 1 entries of 3200 used Entering add_active_range(0, 1048576, 1687551) 2 entries of 3200 used Bootmem setup node 0 0000000000000000-000000019bfff000 NODE_DATA [0000000000010000 - 0000000000017fff] bootmap [0000000000018000 - 000000000004b7ff] pages 34 early res: 0 [0-fff] BIOS data page early res: 1 [6000-7fff] SMP_TRAMPOLINE early res: 2 [200000-757aeb] TEXT DATA BSS early res: 3 [37c17000-37fefc61] RAMDISK early res: 4 [9f400-a03ff] EBDA early res: 5 [8000-ffff] PGTABLE [ffffe20000000000-ffffe200001fffff] PMD ->ffff810001200000 on node 0 [ffffe20000200000-ffffe200003fffff] PMD ->ffff810001600000 on node 0 [ffffe20000400000-ffffe200005fffff] PMD ->ffff810001a00000 on node 0 [ffffe20000600000-ffffe200007fffff] PMD ->ffff810001e00000 on node 0 [ffffe20000800000-ffffe200009fffff] PMD ->ffff810002200000 on node 0 [ffffe20000a00000-ffffe20000bfffff] PMD ->ffff810002600000 on node 0 [ffffe20000c00000-ffffe20000dfffff] PMD ->ffff810002a00000 on node 0 [ffffe20000e00000-ffffe20000ffffff] PMD ->ffff810002e00000 on node 0 [ffffe20001000000-ffffe200011fffff] PMD ->ffff810003200000 on node 0 [ffffe20001200000-ffffe200013fffff] PMD ->ffff810003600000 on node 0 [ffffe20001400000-ffffe200015fffff] PMD ->ffff810003a00000 on node 0 [ffffe20001600000-ffffe200017fffff] PMD ->ffff810003e00000 on node 0 [ffffe20001800000-ffffe200019fffff] PMD ->ffff810004200000 on node 0 [ffffe20001a00000-ffffe20001bfffff] PMD ->ffff810004600000 on node 0 [ffffe20001c00000-ffffe20001dfffff] PMD ->ffff810004a00000 on node 0 [ffffe20001e00000-ffffe20001ffffff] PMD ->ffff810004e00000 on node 0 [ffffe20002000000-ffffe200021fffff] PMD ->ffff810005200000 on node 0 [ffffe20002200000-ffffe200023fffff] PMD ->ffff810005600000 on node 0 [ffffe20002400000-ffffe200025fffff] PMD ->ffff810005a00000 on node 0 [ffffe20002600000-ffffe200027fffff] PMD ->ffff810005e00000 on node 0 [ffffe20002800000-ffffe200029fffff] PMD ->ffff810006200000 on node 0 [ffffe20002a00000-ffffe20002bfffff] PMD ->ffff810006600000 on node 0 [ffffe20002c00000-ffffe20002dfffff] PMD ->ffff810006a00000 on node 0 [ffffe20002e00000-ffffe20002ffffff] PMD ->ffff810006e00000 on node 0 [ffffe20003000000-ffffe200031fffff] PMD ->ffff810007200000 on node 0 [ffffe20003800000-ffffe200039fffff] PMD ->ffff810007600000 on node 0 [ffffe20003a00000-ffffe20003bfffff] PMD ->ffff810007a00000 on node 0 [ffffe20003c00000-ffffe20003dfffff] PMD ->ffff810007e00000 on node 0 [ffffe20003e00000-ffffe20003ffffff] PMD ->ffff810008200000 on node 0 [ffffe20004000000-ffffe200041fffff] PMD ->ffff810008600000 on node 0 [ffffe20004200000-ffffe200043fffff] PMD ->ffff810008a00000 on node 0 [ffffe20004400000-ffffe200045fffff] PMD ->ffff810008e00000 on node 0 [ffffe20004600000-ffffe200047fffff] PMD ->ffff810009200000 on node 0 [ffffe20004800000-ffffe200049fffff] PMD ->ffff810009600000 on node 0 [ffffe20004a00000-ffffe20004bfffff] PMD ->ffff810009a00000 on node 0 [ffffe20004c00000-ffffe20004dfffff] PMD ->ffff810009e00000 on node 0 [ffffe20004e00000-ffffe20004ffffff] PMD ->ffff81000a200000 on node 0 [ffffe20005000000-ffffe200051fffff] PMD ->ffff81000a600000 on node 0 [ffffe20005200000-ffffe200053fffff] PMD ->ffff81000aa00000 on node 0 [ffffe20005400000-ffffe200055fffff] PMD ->ffff81000ae00000 on node 0 [ffffe20005600000-ffffe200057fffff] PMD ->ffff81000b200000 on node 0 [ffffe20005800000-ffffe200059fffff] PMD ->ffff81000b600000 on node 0 [ffffe20005a00000-ffffe20005bfffff] PMD ->ffff81000ba00000 on node 0 Zone PFN ranges: DMA 0 -> 4096 DMA32 4096 -> 1048576 Normal 1048576 -> 1687551 Movable zone start PFN for each node early_node_map[3] active PFN ranges 0: 0 -> 159 0: 256 -> 917491 0: 1048576 -> 1687551 On node 0 totalpages: 1556369 DMA zone: 56 pages used for memmap DMA zone: 1381 pages reserved DMA zone: 2562 pages, LIFO batch:0 DMA32 zone: 14280 pages used for memmap DMA32 zone: 899115 pages, LIFO batch:31 Normal zone: 8735 pages used for memmap Normal zone: 630240 pages, LIFO batch:31 Movable zone: 0 pages used for memmap ACPI: PM-Timer IO Port: 0x908 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 (Bootup-CPU) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled) Processor #6 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled) Processor #7 ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80400] gsi_base[48]) IOAPIC[2]: apic_id 10, address 0xfec80400, GSI 48-71 ACPI: IOAPIC (id[0x0b] address[0xfec84000] gsi_base[72]) IOAPIC[3]: apic_id 11, address 0xfec84000, GSI 72-95 ACPI: IOAPIC (id[0x0c] address[0xfec84400] gsi_base[96]) IOAPIC[4]: apic_id 12, address 0xfec84400, GSI 96-119 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000 PM: Registered nosave memory: 00000000000f0000 - 0000000000100000 PM: Registered nosave memory: 00000000dfff3000 - 00000000dfffb000 PM: Registered nosave memory: 00000000dfffb000 - 00000000e0000000 PM: Registered nosave memory: 00000000e0000000 - 00000000fec00000 PM: Registered nosave memory: 00000000fec00000 - 00000000fed00000 PM: Registered nosave memory: 00000000fed00000 - 00000000fee00000 PM: Registered nosave memory: 00000000fee00000 - 00000000fee10000 PM: Registered nosave memory: 00000000fee10000 - 00000000ffc00000 PM: Registered nosave memory: 00000000ffc00000 - 0000000100000000 Allocating PCI resources starting at e2000000 (gap: e0000000:1ec00000) SMP: Allowing 8 CPUs, 4 hotplug CPUs PERCPU: Allocating 43072 bytes of per cpu data Built 1 zonelists in Node order, mobility grouping on. Total pages: 1531917 Policy zone: Normal Kernel command line: ro root=/dev/VolGroup00/LogVol00 rhgb quiet Initializing CPU#0 PID hash table entries: 4096 (order: 12, 32768 bytes) Extended CMOS year: 2000 TSC calibrated against PM_TIMER time.c: Detected 3200.109 MHz processor. Console: colour VGA+ 80x25 console [tty0] enabled Checking aperture... Calgary: detecting Calgary via BIOS EBDA area Calgary: Unable to locate Rio Grande table in EBDA - bailing! PCI-DMA: Using software bounce buffering for IO (SWIOTLB) Placing software IO TLB between 0xbc33000 - 0xfc33000 Memory: 6061120k/6750204k available (2633k kernel code, 164356k reserved, 1412k data, 344k init) CPA: page pool initialized 1 of 1 pages preallocated SLUB: Genslabs=13, HWalign=64, Order=0-1, MinObjects=4, CPUs=8, Nodes=1 Calibrating delay using timer specific routine.. 6403.59 BogoMIPS (lpj=3201798) Security Framework initialized SELinux: Initializing. SELinux: Starting in permissive mode selinux_register_security: Registering secondary module capability Capability LSM initialized as secondary Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Mount-cache hash table entries: 256 Initializing cgroup subsys ns Initializing cgroup subsys cpuacct CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 0/0 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU0: Thermal monitoring enabled (TM1) ACPI: Core revision 20070126 Using local APIC timer interrupts. APIC timer calibration result 12500412 Detected 12.500 MHz APIC timer. Booting processor 1/4 APIC 0x6 Initializing CPU#1 Calibrating delay using timer specific routine.. 6400.16 BogoMIPS (lpj=3200082) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 1/6 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#1]: passed. Booting processor 2/4 APIC 0x1 Initializing CPU#2 Calibrating delay using timer specific routine.. 6400.12 BogoMIPS (lpj=3200061) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 2/1 -> Node 0 CPU: Physical Processor ID: 0 CPU: Processor Core ID: 0 CPU2: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#2]: passed. Booting processor 3/4 APIC 0x7 Initializing CPU#3 Calibrating delay using timer specific routine.. 6400.18 BogoMIPS (lpj=3200092) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU 3/7 -> Node 0 CPU: Physical Processor ID: 3 CPU: Processor Core ID: 0 CPU3: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.20GHz stepping 04 checking TSC synchronization [CPU#0 -> CPU#3]: passed. Brought up 4 CPUs sizeof(vma)=176 bytes sizeof(page)=56 bytes sizeof(inode)=560 bytes sizeof(dentry)=208 bytes sizeof(ext3inode)=760 bytes sizeof(buffer_head)=104 bytes sizeof(skbuff)=224 bytes sizeof(task_struct)=6224 bytes CPU0 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000001 00000000,00000004 domain 1: span 00000000,0000000f groups: 00000000,00000005 00000000,0000000a domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU1 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000002 00000000,00000008 domain 1: span 00000000,0000000f groups: 00000000,0000000a 00000000,00000005 domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU2 attaching sched-domain: domain 0: span 00000000,00000005 groups: 00000000,00000004 00000000,00000001 domain 1: span 00000000,0000000f groups: 00000000,00000005 00000000,0000000a domain 2: span 00000000,0000000f groups: 00000000,0000000f CPU3 attaching sched-domain: domain 0: span 00000000,0000000a groups: 00000000,00000008 00000000,00000002 domain 1: span 00000000,0000000f groups: 00000000,0000000a 00000000,00000005 domain 2: span 00000000,0000000f groups: 00000000,0000000f net_namespace: 1016 bytes Time: 2:50:25 Date: 06/27/08 NET: Registered protocol family 16 No dock devices found. ACPI: bus type pci registered PCI: Found Intel Corporation E7520 Memory Controller Hub with MMCONFIG support. PCI: Using MMCONFIG at e0000000 - efffffff PCI: Using configuration type 1 mtrr: your CPUs had inconsistent fixed MTRR settings mtrr: probably your BIOS does not setup all CPUs. mtrr: corrected configuration. ACPI: EC: Look up EC in DSDT ACPI: Interpreter enabled ACPI: (supports S0 S4 S5) ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) pci 0000:00:1f.0: Force enabled HPET at 0xfed00000 pci 0000:00:1f.0: quirk: region 0900-097f claimed by ICH4 ACPI/GPIO/TCO pci 0000:00:1f.0: quirk: region 0800-083f claimed by ICH4 GPIO pci 0000:02:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:02:00.2: PXH quirk detected; SHPC device MSI disabled pci 0000:05:00.0: PXH quirk detected; SHPC device MSI disabled pci 0000:05:00.2: PXH quirk detected; SHPC device MSI disabled PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IP2P._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXA._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTA0.PCXB._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXC._PRT] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PTC0.PCXD._PRT] ACPI: PCI Interrupt Link [LNKA] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs *5 7 10 11) ACPI: PCI Interrupt Link [LNKH] (IRQs *5 7 10 11) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init ACPI: bus type pnp registered pnp: PnP ACPI: found 9 devices ACPI: ACPI bus type pnp unregistered usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 4 of device 0000:00:1d.0 PCI: Cannot allocate resource region 4 of device 0000:00:1d.1 PCI: Cannot allocate resource region 4 of device 0000:00:1d.2 PCI: Cannot allocate resource region 4 of device 0000:00:1d.3 NetLabel: Initializing NetLabel: domain hash size = 128 NetLabel: protocols = UNLABELED CIPSOv4 NetLabel: unlabeled traffic allowed by default PCI-GART: No AMD northbridge found. hpet clockevent registered hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 hpet0: 3 64-bit timers, 14318180 Hz system 00:01: ioport range 0x408-0x40f has been reserved system 00:01: ioport range 0x4d0-0x4d1 has been reserved system 00:01: ioport range 0x700-0x71f has been reserved system 00:01: ioport range 0x800-0x83f has been reserved system 00:01: ioport range 0x900-0x97f has been reserved system 00:01: ioport range 0xc80-0xc83 has been reserved system 00:01: ioport range 0xcd4-0xcd7 has been reserved system 00:01: ioport range 0xf50-0xf58 has been reserved system 00:01: ioport range 0x2f8-0x2ff has been reserved system 00:01: iomem range 0xe0000000-0xefffffff could not be reserved PCI: Bridge: 0000:02:00.0 IO window: disabled. MEM window: 0xfde00000-0xfdefffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.2 IO window: 4000-4fff MEM window: 0xfdf00000-0xfdffffff PREFETCH window: 0x00000000f0000000-0x00000000f00fffff PCI: Bridge: 0000:00:02.0 IO window: 4000-4fff MEM window: 0xfde00000-0xfdffffff PREFETCH window: 0x00000000f0000000-0x00000000f00fffff PCI: Bridge: 0000:05:00.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:05:00.2 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:06.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-3fff MEM window: 0xfbf00000-0xfcffffff PREFETCH window: 0x00000000f0100000-0x00000000f01fffff ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:02.0 to 64 PCI: Setting latency timer of device 0000:02:00.0 to 64 PCI: Setting latency timer of device 0000:02:00.2 to 64 ACPI: PCI Interrupt 0000:00:06.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:06.0 to 64 PCI: Setting latency timer of device 0000:05:00.0 to 64 PCI: Setting latency timer of device 0000:05:00.2 to 64 PCI: Setting latency timer of device 0000:00:1e.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 524288 (order: 11, 8388608 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 524288 bind 65536) TCP reno registered checking if image is initramfs... it is Freeing initrd memory: 3939k freed audit: initializing netlink socket (disabled) type=2000 audit(1214535024.741:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) SELinux: Registering netfilter hooks ksign: Installing public key data Loading keyring - Added public key 77E2A7645533EBBA - User ID: Red Hat, Inc. (Kernel Module GPG key) Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) PCI: Setting latency timer of device 0000:00:02.0 to 64 Allocate Port Service[0000:00:02.0:pcie00] Allocate Port Service[0000:00:02.0:pcie01] PCI: Setting latency timer of device 0000:00:06.0 to 64 Allocate Port Service[0000:00:06.0:pcie00] Allocate Port Service[0000:00:06.0:pcie01] AER service couldn't init device 0000:00:02.0:pcie01 - no _OSC support AER service couldn't init device 0000:00:06.0:pcie01 - no _OSC support pci_hotplug: PCI Hot Plug PCI Core version: 0.5 ACPI: ACPI0007:00 is registered as cooling_device0 ACPI: ACPI0007:01 is registered as cooling_device1 ACPI: ACPI0007:06 is registered as cooling_device2 ACPI: ACPI0007:07 is registered as cooling_device3 ACPI: LNXTHERM:01 is registered as thermal_zone0 ACPI: Thermal Zone [THM0] (8 C) Real Time Clock Driver v1.12ac Non-volatile memory driver v1.2 Linux agpgart interface v0.103 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled Switched to high resolution mode on CPU 2 Switched to high resolution mode on CPU 3 Switched to high resolution mode on CPU 1 Switched to high resolution mode on CPU 0 serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A brd: module loaded input: Macintosh mouse button emulation as /class/input/input0 PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 KBD port at 0x60,0x64 irq 1 serio: i8042 AUX port at 0x60,0x64 irq 12 mice: PS/2 mouse device common for all mice input: AT Translated Set 2 keyboard as /class/input/input1 cpuidle: using governor ladder cpuidle: using governor menu usbcore: registered new interface driver hiddev usbcore: registered new interface driver usbhid drivers/hid/usbhid/hid-core.c: v2.6:USB HID core driver TCP cubic registered Initializing XFRM netlink socket NET: Registered protocol family 1 NET: Registered protocol family 17 registered taskstats version 1 Magic number: 12:26:815 Freeing unused kernel memory: 344k freed Write protecting the kernel read-only data: 1128k ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 23 PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: EHCI Host Controller ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 ehci_hcd 0000:00:1d.7: debug port 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfbef0000 ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 8 ports detected usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: EHCI Host Controller usb usb1: Manufacturer: Linux 2.6.25.6-27.fc8 ehci_hcd usb usb1: SerialNumber: 0000:00:1d.7 ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: UHCI Host Controller uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:1d.0: irq 16, io base 0x00005000 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: UHCI Host Controller usb usb2: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd usb usb2: SerialNumber: 0000:00:1d.0 ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: UHCI Host Controller uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:1d.1: irq 19, io base 0x00005020 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: UHCI Host Controller usb usb3: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd usb usb3: SerialNumber: 0000:00:1d.1 ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: UHCI Host Controller uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 uhci_hcd 0000:00:1d.2: irq 18, io base 0x00005040 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: UHCI Host Controller usb usb4: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd usb usb4: SerialNumber: 0000:00:1d.2 ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 PCI: Setting latency timer of device 0000:00:1d.3 to 64 uhci_hcd 0000:00:1d.3: UHCI Host Controller uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 uhci_hcd 0000:00:1d.3: irq 16, io base 0x00005060 usb usb5: configuration #1 chosen from 1 choice hub 5-0:1.0: USB hub found hub 5-0:1.0: 2 ports detected usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 usb usb5: Product: UHCI Host Controller usb usb5: Manufacturer: Linux 2.6.25.6-27.fc8 uhci_hcd usb usb5: SerialNumber: 0000:00:1d.3 device-mapper: uevent: version 1.0.3 device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-de...@redhat.com SCSI subsystem initialized Driver 'sd' needs updating - please use bus_type methods HP CISS Driver (v 3.6.14) ACPI: PCI Interrupt 0000:04:03.0[A] -> GSI 51 (level, low) -> IRQ 51 input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 cciss0: <0x46> at PCI 0000:04:03.0 IRQ 51 using DAC blocks= 711261810 block_size= 512 heads=255, sectors=63, cylinders=44274 blocks= 711261810 block_size= 512 heads=255, sectors=63, cylinders=44274 cciss/c0d0: p1 p2 libata version 3.00 loaded. ata_piix 0000:00:1f.1: version 2.12 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ACPI: Unable to derive IRQ for device 0000:00:1f.1 PCI: Setting latency timer of device 0000:00:1f.1 to 64 scsi0 : ata_piix scsi1 : ata_piix ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x500 irq 14 ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x508 irq 15 ata1.00: ATAPI: TSSTcorpCD-ROM TS-L162C, N204, max UDMA/33 ata1.00: configured for UDMA/33 scsi 0:0:0:0: CD-ROM TSSTcorp CD-ROM TS-L162C N204 PQ: 0 ANSI: 5 kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. SELinux: Disabled at runtime. SELinux: Unregistering netfilter hooks type=1404 audit(1214535030.264:2): selinux=0 auid=4294967295 ses=4294967295 Driver 'sr' needs updating - please use bus_type methods sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.20 sr 0:0:0:0: Attached scsi CD-ROM sr0 EDAC MC: Ver: 2.1.0 Jun 13 2008 intel_rng: FWH not detected shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 sr 0:0:0:0: Attached scsi generic sg0 type 5 Contact your BIOS vendor to see if the E752x error registers can be safely un-hidden input: Power Button (FF) as /class/input/input3 ACPI: Power Button (FF) [PWRF] iTCO_vendor_support: vendor-support=0 iTCO_wdt: Intel TCO WatchDog Timer Driver v1.02 (26-Jul-2007) iTCO_wdt: failed to reset NO_REBOOT flag, reboot disabled by hardware iTCO_wdt: No card detected tg3.c:v3.91 (April 18, 2008) ACPI: PCI Interrupt 0000:03:01.0[A] -> GSI 25 (level, low) -> IRQ 25 eth0: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0f:20:f9:06:09 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] WireSpeed[1] TSOcap[0] eth0: dma_rwctrl[769f4000] dma_mask[64-bit] ACPI: PCI Interrupt 0000:03:01.1[B] -> GSI 26 (level, low) -> IRQ 26 eth1: Tigon3 [partno(N/A) rev 2100 PHY(5704)] (PCIX:133MHz:64-bit) 10/100/1000Base-T Ethernet 00:0f:20:f9:06:08 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] WireSpeed[1] TSOcap[1] eth1: dma_rwctrl[769f4000] dma_mask[64-bit] hpwdt 0000:01:04.0: This server does not have an iLO2 ASIC. input: PC Speaker as /class/input/input4 Floppy drive(s): fd0 is 1.44M FDC 0 is a National Semiconductor PC87306 loop: module loaded EXT3 FS on dm-0, internal journal kjournald starting. Commit interval 5 seconds EXT3 FS on cciss/c0d0p1, internal journal EXT3-fs: mounted filesystem with ordered data mode. Adding 2031608k swap on /dev/mapper/VolGroup00-LogVol01. Priority:-1 extents:1 across:2031608k IA-32 Microcode Update Driver: v1.14a <tig...@aivazian.fsnet.co.uk> NET: Registered protocol family 10 lo: Disabled Privacy Extensions ip6_tables: (C) 2000-2006 Netfilter Core Team ip_tables: (C) 2000-2006 Netfilter Core Team nf_conntrack version 0.5.0 (16384 buckets, 65536 max) ADDRCONF(NETDEV_UP): eth0: link is not ready tg3: eth0: Link is up at 1000 Mbps, full duplex. tg3: eth0: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready ADDRCONF(NETDEV_UP): eth1: link is not ready tg3: eth1: Link is up at 1000 Mbps, full duplex. tg3: eth1: Flow control is off for TX and off for RX. ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready fuse init (API version 7.9) warning: `dbus-daemon' uses 32-bit capabilities (legacy support in use) eth0: no IPv6 routers present eth1: no IPv6 routers present i2c /dev entries driver end_request: I/O error, dev fd0, sector 0 end_request: I/O error, dev fd0, sector 0 Netfilter messages via NETLINK v0.30. ctnetlink v0.93: registering with nfnetlink. end_request: I/O error, dev fd0, sector 0 hald[2226]: segfault at 7fb9c1464000 ip 4102d0 sp 7fffc9aa3e90 error 4 in hald[400000+4f000] testCharPtrPtr2[7474]: segfault at ffffff88 ip 360be795c0 sp 7fffa68857c8 error 4 in libc-2.7.so[360be00000+14d000] testCharPtrPtr2[7482]: segfault at 62 ip 360be795a0 sp 7fffeeb63aa8 error 4 in libc-2.7.so[360be00000+14d000] testCharPtrPtr2[7500]: segfault at 62 ip 360be795a0 sp 7fff811640a8 error 4 in libc-2.7.so[360be00000+14d000] testCharPtrPtr2[7517]: segfault at 62 ip 360be795a0 sp 7fffcfa689a8 error 4 in libc-2.7.so[360be00000+14d000] testCharPtrPtr2[7554]: segfault at 61 ip 360be795a0 sp 7fff2e21c168 error 4 in libc-2.7.so[360be00000+14d000] testCharPtrPtr2[7572]: segfault at 61 ip 360be795a0 sp 7fff96519468 error 4 in libc-2.7.so[360be00000+14d000] end_request: I/O error, dev fd0, sector 0 Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/7 ------------------------------------------------------------------------ On 2008-09-24T22:59:07+00:00 Chuck wrote: Patch from the upstream bug report is reported to fix the problem. Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/8 ------------------------------------------------------------------------ On 2008-09-24T23:00:29+00:00 Chuck wrote: Fix for upstream patch: Subject: acpi-cope-with-pnpacpi-tables-missing-an-rtc-entry-fix From: Andrew Morton <a...@linux-foundation.org> Cc: <sta...@kernel.org> Cc: Adam Belay <abe...@novell.com> Cc: Alessandro Zummo <a.zu...@towertech.it> Cc: Bjorn Helgaas <bjorn.helg...@hp.com> Cc: Chuck Ebbert <cebb...@redhat.com> Cc: David Brownell <dbrown...@users.sourceforge.net> Cc: Ingo Molnar <mi...@elte.hu> Cc: Len Brown <l...@kernel.org> Cc: Rik Theys <rik.th...@esat.kuleuven.be> Cc: Thomas Gleixner <t...@linutronix.de> Signed-off-by: Andrew Morton <a...@linux-foundation.org> --- include/asm-x86/mc146818rtc.h | 2 ++ 1 file changed, 2 insertions(+) diff -puN include/asm-x86/mc146818rtc.h~acpi-cope-with-pnpacpi-tables-missing-an-rtc-entry-fix include/asm-x86/mc146818rtc.h --- a/include/asm-x86/mc146818rtc.h~acpi-cope-with-pnpacpi-tables-missing-an-rtc-entry-fix +++ a/include/asm-x86/mc146818rtc.h @@ -9,6 +9,8 @@ #include <asm/processor.h> #include <linux/mc146818rtc.h> +struct device; + #ifndef RTC_PORT #define RTC_PORT(x) (0x70 + (x)) #define RTC_ALWAYS_BCD 1 /* RTC operates in binary mode */ Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/9 ------------------------------------------------------------------------ On 2008-09-29T23:31:05+00:00 Chuck wrote: Until that fix gets into a release, you can work around the problem by booting with the kernel option "pnpacpi=off". Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/10 ------------------------------------------------------------------------ On 2008-10-02T01:48:08+00:00 shr wrote: Setting the kernel option "pnpacpi=off" is working fine on my systems. I am wondering if it will cause any other problem? The newest kernel on Fedora 9 ,"kernel-2.6.26.5-45.fc9.x86_64", hasn't included the fix... Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/11 ------------------------------------------------------------------------ On 2008-10-15T16:46:14+00:00 Bjorn wrote: The two patches below (in Linus' current git tree) should fix this problem: http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=758a7f7bb86b520aadc484f23da85e547b3bf3d8 http://git.kernel.org/?p=linux/kernel/git/torvalds/linux-2.6.git;a=commitdiff;h=72f22b1eb6ca5e4676a632a04d40d46cb61d4562 shr, can you please test these and report the results? Thanks! Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/12 ------------------------------------------------------------------------ On 2008-10-16T17:57:38+00:00 Chuck wrote: Upstream patches merged: 2.6.27.1-20.fc10 2.6.26.6-77.fc9 2.6.26.6-48.fc8 Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/13 ------------------------------------------------------------------------ On 2008-10-22T09:06:53+00:00 shr wrote: Yes, it's working [root@HPDL360G5-1 ~]# uname -a Linux HPDL360G5-1.lab.icst.org.tw 2.6.27.2 #1 SMP Wed Oct 22 16:39:56 CST 2008 x86_64 x86_64 x86_64 GNU/Linu [root@HPDL360G5-1 ~]# dmesg | grep -i rtc platform rtc_cmos: registered platform RTC device (no PNP device found) rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0 rtc0: alarms up to one day, hpet irqs [root@HPDL360G5-1 ~]# ls -al /dev/rtc* lrwxrwxrwx 1 root root 4 2008-10-23 00:49 /dev/rtc -> rtc0 crw-r--r-- 1 root root 254, 0 2008-10-23 00:49 /dev/rtc0 kernel 2.6.27.2 rtc.c line 216- static struct platform_device rtc_device = { .name = "rtc_cmos", .id = -1, .resource = rtc_resources, .num_resources = ARRAY_SIZE(rtc_resources), }; static __init int add_rtc_cmos(void) { #ifdef CONFIG_PNP static const char *ids[] __initconst = { "PNP0b00", "PNP0b01", "PNP0b02", }; struct pnp_dev *dev; struct pnp_id *id; int i; pnp_for_each_dev(dev) { for (id = dev->id; id; id = id->next) { for (i = 0; i < ARRAY_SIZE(ids); i++) { if (compare_pnp_id(id, ids[i]) != 0) return 0; } } } #endif platform_device_register(&rtc_device); dev_info(&rtc_device.dev, "registered platform RTC device (no PNP device found)\n"); return 0; } device_initcall(add_rtc_cmos); rtc-cmos.c line 1021- static struct platform_driver cmos_platform_driver = { .remove = __exit_p(cmos_platform_remove), .shutdown = cmos_platform_shutdown, .driver = { .name = (char *) driver_name, .suspend = cmos_suspend, .resume = cmos_resume, } }; static int __init cmos_init(void) { int retval = 0; #ifdef CONFIG_PNP pnp_register_driver(&cmos_pnp_driver); #endif if (!cmos_rtc.dev) retval = platform_driver_probe(&cmos_platform_driver, cmos_platform_probe); if (retval == 0) return 0; #ifdef CONFIG_PNP pnp_unregister_driver(&cmos_pnp_driver); #endif return retval; } module_init(cmos_init); static void __exit cmos_exit(void) { #ifdef CONFIG_PNP pnp_unregister_driver(&cmos_pnp_driver); #endif } module_exit(cmos_exit); MODULE_AUTHOR("David Brownell"); MODULE_DESCRIPTION("Driver for PC-style 'CMOS' RTCs"); MODULE_LICENSE("GPL"); Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/14 ------------------------------------------------------------------------ On 2015-04-27T08:02:15+00:00 bingbing wrote: System CMOS/real time clock driver manufacturer is (Standard system devices) and developed by Microsoft in the database contains 78 versions of the System CMOS/real time clock matches the hardware *PNP0B00.System CMOS/real time clock compatible with 1 hardwares driver contains 9 binary files, You can Download the latest drivers for your System CMOS/real time clock. http://www.binarydb.com/driver/System-CMOS%2Freal-time-clock-340.html Reply at: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/comments/19 ** Changed in: linux (Fedora) Importance: Unknown => Low -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/293484 Title: "New" Real Time Clock driver won't work on HP DL380 G4/G5 To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/293484/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
