Public bug reported:
Hi guys,
some days ago, I have run the command apt-get dist-upgrade and my system
(Virtual machine Hyper-V) install the latest kernel 4.4.0-72-generic.
Yesterday, I restart the system and detect, that the kernel unable to
boot :( Another boot, I selected the kernel 4.4.0.66-generic and the
system works perfectly.
Today, I found the resaon for that. While booting 4.4.0-72 I see the
follow error:
Dev sdd: unable to read RDB block 0
This partition is a gpt device and it works perfectly with kernel
4.4.0-66-generic. The device is ok and the smart values are good.
I know that´s not enough informations but I don´t know how I find the
informations about the last crash boot process.
cat /proc/version_signature
Ubuntu 4.4.0-66.87-generic 4.4.44
sudo lspci -vnvn
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host
bridge (AGP disabled) [8086:7192] (rev 03)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA
[8086:7110] (rev 01)
Subsystem: Microsoft Corporation 82371AB/EB/MB PIIX4 ISA [1414:0000]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
Region 4: I/O ports at ffa0 [size=16]
Kernel driver in use: ata_piix
Kernel modules: pata_acpi
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 02)
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Interrupt: pin A routed to IRQ 9
Kernel modules: i2c_piix4
00:08.0 VGA compatible controller [0300]: Microsoft Corporation Hyper-V virtual
VGA [1414:5353] (prog-if 00 [VGA controller])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping-
SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
Expansion ROM at <unassigned> [disabled]
Kernel driver in use: hyperv_fb
Kernel modules: hyperv_fb
** Affects: linux (Ubuntu)
Importance: Undecided
Status: New
** Attachment added: "some screenshots while boot process"
https://bugs.launchpad.net/bugs/1683275/+attachment/4863423/+files/Archiv.zip
** Description changed:
Hi guys,
some days ago, I have run the command apt-get dist-upgrade and my system
(Virtual machine Hyper-V) install the latest kernel 4.4.0-72-generic.
Yesterday, I restart the system and detect, that the kernel unable to
boot :( Another boot, I selected the kernel 4.4.0.66-generic and the
system works perfectly.
Today, I found the resaon for that. While booting 4.4.0-72 I see the
follow error:
Dev sdd: unable to read RDB block 0
-
- This partition is an gpt device and it works perfectly with kernel
4.4.0-66-generic. The device is ok and the smart values are good.
+ This partition is a gpt device and it works perfectly with kernel
+ 4.4.0-66-generic. The device is ok and the smart values are good.
I know that´s not enough informations but I don´t know how I find the
informations about the last crash boot process.
-
- cat /proc/version_signature
+ cat /proc/version_signature
Ubuntu 4.4.0-66.87-generic 4.4.44
-
sudo lspci -vnvn
00:00.0 Host bridge [0600]: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX
Host bridge (AGP disabled) [8086:7192] (rev 03)
- Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
+ Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
+ Latency: 0
00:07.0 ISA bridge [0601]: Intel Corporation 82371AB/EB/MB PIIX4 ISA
[8086:7110] (rev 01)
- Subsystem: Microsoft Corporation 82371AB/EB/MB PIIX4 ISA [1414:0000]
- Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
+ Subsystem: Microsoft Corporation 82371AB/EB/MB PIIX4 ISA [1414:0000]
+ Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
+ Latency: 0
00:07.1 IDE interface [0101]: Intel Corporation 82371AB/EB/MB PIIX4 IDE
[8086:7111] (rev 01) (prog-if 80 [Master])
- Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable)
[size=8]
- Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
- Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable)
[size=8]
- Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
- Region 4: I/O ports at ffa0 [size=16]
- Kernel driver in use: ata_piix
- Kernel modules: pata_acpi
+ Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Region 0: [virtual] Memory at 000001f0 (32-bit, non-prefetchable) [size=8]
+ Region 1: [virtual] Memory at 000003f0 (type 3, non-prefetchable)
+ Region 2: [virtual] Memory at 00000170 (32-bit, non-prefetchable) [size=8]
+ Region 3: [virtual] Memory at 00000370 (type 3, non-prefetchable)
+ Region 4: I/O ports at ffa0 [size=16]
+ Kernel driver in use: ata_piix
+ Kernel modules: pata_acpi
00:07.3 Bridge [0680]: Intel Corporation 82371AB/EB/MB PIIX4 ACPI [8086:7113]
(rev 02)
- Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort-
<TAbort- <MAbort- >SERR- <PERR- INTx-
- Interrupt: pin A routed to IRQ 9
- Kernel modules: i2c_piix4
+ Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
+ Interrupt: pin A routed to IRQ 9
+ Kernel modules: i2c_piix4
00:08.0 VGA compatible controller [0300]: Microsoft Corporation Hyper-V
virtual VGA [1414:5353] (prog-if 00 [VGA controller])
- Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
- Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
- Latency: 0
- Interrupt: pin A routed to IRQ 11
- Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
- Expansion ROM at <unassigned> [disabled]
- Kernel driver in use: hyperv_fb
- Kernel modules: hyperv_fb
+ Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
+ Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort-
<MAbort- >SERR- <PERR- INTx-
+ Latency: 0
+ Interrupt: pin A routed to IRQ 11
+ Region 0: Memory at f8000000 (32-bit, non-prefetchable) [size=64M]
+ Expansion ROM at <unassigned> [disabled]
+ Kernel driver in use: hyperv_fb
+ Kernel modules: hyperv_fb
--
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1683275
Title:
Ubuntu 16.04.2 LTS doesn´t boot after upgrading to linux
4.4.0-72-generic
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1683275/+subscriptions
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
