2007/10/14, Till Kamppeter <[EMAIL PROTECTED]>: > Looks like a problem caused by the AppArmor protection of CUPS. Can you > attach your /var/log/syslog and also the output of the "dmesg" command? > To deactivate the protection you can run "sudo aa-complain cupsd". Are > you able to print then? To reactivate the protection, run "sudo aa- > enforce cupsd".
Till, seems that you were right. Today I updated Gutsy with the latest patches, without changing anything in the AppArmor settings. Tried to print, but it failed again, same error. I attach syslog and dmesg outputs as generated after unsuccesful print attempts. Then I followed Till's suggestion and set AppArmor to compain mode: print jobs completed successfully afterwards. I then reactivated the protection with aa-enforce, tried to print again expecting the print job to fail, but they worked instead! Hope you now have enough info to understand what happened and possibly fix the issue. -- Pietro Piutti --------------------------------------------------------------------- CCNA - MCP - MCSA Network Technician, Systems Engineering Group United Nations International Computing Centre United Nations Logistics Base, Brindisi, Italy --------------------------------------------------------------------- http://www.linkedin.com/in/pietropiutti [ 0.000000] Linux version 2.6.22-14-generic ([EMAIL PROTECTED]) (gcc version 4.1.3 20070929 (prerelease) (Ubuntu 4.1.2-16ubuntu2)) #1 SMP Wed Oct 10 06:00:47 GMT 2007 (Ubuntu 2.6.22-14.43-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable) [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) [ 0.000000] 127MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] found SMP MP-table at 000f5b70 [ 0.000000] Entering add_active_range(0, 0, 262128) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 262128 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 262128 [ 0.000000] On node 0 totalpages: 262128 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 255 pages used for memmap [ 0.000000] HighMem zone: 32497 pages, LIFO batch:7 [ 0.000000] DMI 2.2 present. [ 0.000000] ACPI: RSDP signature @ 0xC00F7700 checksum 0 [ 0.000000] ACPI: RSDP 000F7700, 0014 (r0 IntelR) [ 0.000000] ACPI: RSDT 3FFF3000, 002C (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: FACP 3FFF3040, 0074 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: DSDT 3FFF30C0, 41AF (r1 INTELR AWRDACPI 1000 MSFT 100000E) [ 0.000000] ACPI: FACS 3FFF0000, 0040 [ 0.000000] ACPI: APIC 3FFF7280, 0068 (r1 IntelR AWRDACPI 42302E31 AWRD 0) [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] Processor #0 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] Processor #1 15:4 APIC version 20 [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000) [ 0.000000] Built 1 zonelists. Total pages: 260081 [ 0.000000] Kernel command line: root=UUID=eeed906e-0b88-46cd-b3be-62997b42428b ro quiet splash [ 0.000000] mapped APIC to ffffd000 (fee00000) [ 0.000000] mapped IOAPIC to ffffc000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Detected 3013.161 MHz processor. [ 25.193568] Console: colour VGA+ 80x25 [ 25.194019] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 25.194428] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 25.217001] Memory: 1027752k/1048512k available (2015k kernel code, 20028k reserved, 916k data, 364k init, 131008k highmem) [ 25.217012] virtual kernel memory layout: [ 25.217013] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 25.217014] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 25.217016] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 25.217017] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 25.217018] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 25.217019] .data : 0xc02f7d26 - 0xc03dce84 ( 916 kB) [ 25.217020] .text : 0xc0100000 - 0xc02f7d26 (2015 kB) [ 25.217023] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 25.217071] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2, Nodes=1 [ 25.296893] Calibrating delay using timer specific routine.. 6030.19 BogoMIPS (lpj=12060398) [ 25.296924] Security Framework v1.0.0 initialized [ 25.296931] SELinux: Disabled at boot. [ 25.296943] Mount-cache hash table entries: 512 [ 25.297092] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 [ 25.297101] monitor/mwait feature present. [ 25.297103] using mwait in idle threads. [ 25.297110] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 25.297113] CPU: L2 cache: 1024K [ 25.297116] CPU: Physical Processor ID: 0 [ 25.297118] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 [ 25.297129] Compat vDSO mapped to ffffe000. [ 25.297146] Checking 'hlt' instruction... OK. [ 25.312980] SMP alternatives: switching to UP code [ 25.313519] Early unpacking initramfs... done [ 25.595033] ACPI: Core revision 20070126 [ 25.595086] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 25.610520] CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 [ 25.610538] SMP alternatives: switching to SMP code [ 25.610680] Booting processor 1/1 eip 3000 [ 25.620796] Initializing CPU#1 [ 25.699862] Calibrating delay using timer specific routine.. 6025.98 BogoMIPS (lpj=12051977) [ 25.699873] CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 0000441d 00000000 00000000 [ 25.699879] monitor/mwait feature present. [ 25.699886] CPU: Trace cache: 12K uops, L1 D cache: 16K [ 25.699889] CPU: L2 cache: 1024K [ 25.699892] CPU: Physical Processor ID: 0 [ 25.699894] CPU: After all inits, caps: bfebfbff 00000000 00000000 0000b180 0000441d 00000000 00000000 [ 25.700270] CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 01 [ 25.700312] Total of 2 processors activated (12056.18 BogoMIPS). [ 25.700441] ENABLING IO-APIC IRQs [ 25.700621] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 25.847602] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 25.867567] Brought up 2 CPUs [ 25.982072] migration_cost=206 [ 25.982253] Booting paravirtualized kernel on bare hardware [ 25.982323] Time: 15:22:01 Date: 09/15/107 [ 25.982349] NET: Registered protocol family 16 [ 25.982446] EISA bus registered [ 25.982452] ACPI: bus type pci registered [ 26.009395] PCI: PCI BIOS revision 2.10 entry at 0xfba40, last bus=2 [ 26.009398] PCI: Using configuration type 1 [ 26.009400] Setting up standard PCI resources [ 26.011466] ACPI: EC: Look up EC in DSDT [ 26.015169] ACPI: Interpreter enabled [ 26.015172] ACPI: (supports S0 S1 S4 S5) [ 26.015196] ACPI: Using IOAPIC for interrupt routing [ 26.020331] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 26.020339] PCI: Probing PCI hardware (bus 00) [ 26.020800] PCI quirk: region 0400-047f claimed by ICH4 ACPI/GPIO/TCO [ 26.020804] PCI quirk: region 0480-04bf claimed by ICH4 GPIO [ 26.021178] PCI: Transparent bridge - 0000:00:1e.0 [ 26.021206] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 26.021333] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] [ 26.027289] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 *10 11 12 14 15) [ 26.027397] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 9 10 11 12 14 15) [ 26.027502] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12 14 15) [ 26.027608] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 *9 10 11 12 14 15) [ 26.027713] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 26.027819] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 26.027925] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled. [ 26.028031] ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 7 9 10 11 12 14 15) [ 26.028142] Linux Plug and Play Support v0.97 (c) Adam Belay [ 26.028157] pnp: PnP ACPI init [ 26.028166] ACPI: bus type pnp registered [ 26.030957] pnp: PnP ACPI: found 14 devices [ 26.030959] ACPI: ACPI bus type pnp unregistered [ 26.030964] PnPBIOS: Disabled by ACPI PNP [ 26.031025] PCI: Using ACPI for IRQ routing [ 26.031028] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 26.043739] NET: Registered protocol family 8 [ 26.043741] NET: Registered protocol family 20 [ 26.043813] pnp: 00:0b: ioport range 0x400-0x4bf could not be reserved [ 26.043820] pnp: 00:0d: iomem range 0xcec00-0xcffff has been reserved [ 26.043824] pnp: 00:0d: iomem range 0xf0000-0xf7fff could not be reserved [ 26.043826] pnp: 00:0d: iomem range 0xf8000-0xfbfff could not be reserved [ 26.043829] pnp: 00:0d: iomem range 0xfc000-0xfffff could not be reserved [ 26.047009] Time: tsc clocksource has been installed. [ 26.074125] PCI: Bridge: 0000:00:01.0 [ 26.074128] IO window: disabled. [ 26.074133] MEM window: f8000000-faffffff [ 26.074137] PREFETCH window: e0000000-efffffff [ 26.074142] PCI: Bridge: 0000:00:1e.0 [ 26.074145] IO window: a000-afff [ 26.074150] MEM window: fb000000-fb0fffff [ 26.074154] PREFETCH window: disabled. [ 26.074171] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 26.074182] NET: Registered protocol family 2 [ 26.110979] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 26.111087] TCP established hash table entries: 131072 (order: 8, 1572864 bytes) [ 26.112049] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 26.112438] TCP: Hash tables configured (established 131072 bind 65536) [ 26.112441] TCP reno registered [ 26.123098] checking if image is initramfs... it is [ 26.573675] Switched to high resolution mode on CPU 0 [ 26.573764] Switched to high resolution mode on CPU 1 [ 26.680895] Freeing initrd memory: 7120k freed [ 26.681522] audit: initializing netlink socket (disabled) [ 26.681538] audit(1192461721.204:1): initialized [ 26.681637] highmem bounce pool size: 64 pages [ 26.683947] VFS: Disk quotas dquot_6.5.1 [ 26.684011] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 26.684117] io scheduler noop registered [ 26.684120] io scheduler anticipatory registered [ 26.684122] io scheduler deadline registered [ 26.684137] io scheduler cfq registered (default) [ 26.684226] Boot video device is 0000:01:00.0 [ 26.684399] isapnp: Scanning for PnP cards... [ 27.035176] isapnp: No Plug & Play device found [ 27.061870] Real Time Clock Driver v1.12ac [ 27.061974] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 27.062059] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 27.062753] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A [ 27.063577] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 27.063788] input: Macintosh mouse button emulation as /class/input/input0 [ 27.063883] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 [ 27.066316] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 27.066324] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 27.066532] mice: PS/2 mouse device common for all mice [ 27.066662] EISA: Probing bus 0 at eisa.0 [ 27.066701] EISA: Detected 0 cards. [ 27.066791] TCP cubic registered [ 27.066804] NET: Registered protocol family 1 [ 27.066826] Using IPI No-Shortcut mode [ 27.066969] Magic number: 11:564:386 [ 27.067434] Freeing unused kernel memory: 364k freed [ 27.083059] input: AT Translated Set 2 keyboard as /class/input/input1 [ 28.284428] AppArmor: AppArmor initialized<5>audit(1192461722.704:2): type=1505 info="AppArmor initialized" pid=1201 [ 28.293172] fuse init (API version 7.8) [ 28.299450] Failure registering capabilities with primary security module. [ 28.305624] ACPI: Fan [FAN] (on) [ 28.509158] ACPI: Thermal Zone [THRM] (36 C) [ 29.017947] usbcore: registered new interface driver usbfs [ 29.017982] usbcore: registered new interface driver hub [ 29.018015] usbcore: registered new device driver usb [ 29.019248] USB Universal Host Controller Interface driver v3.0 [ 29.019342] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 29.019359] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 29.019365] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 29.019578] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 29.019611] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bc00 [ 29.019795] usb usb1: configuration #1 chosen from 1 choice [ 29.019844] hub 1-0:1.0: USB hub found [ 29.019855] hub 1-0:1.0: 2 ports detected [ 29.123376] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 [ 29.123395] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 29.123402] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 29.123444] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 29.123475] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000b000 [ 29.123626] usb usb2: configuration #1 chosen from 1 choice [ 29.123672] hub 2-0:1.0: USB hub found [ 29.123682] hub 2-0:1.0: 2 ports detected [ 29.206242] 8139too Fast Ethernet driver 0.9.28 [ 29.212175] Floppy drive(s): fd0 is 1.44M [ 29.227098] ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 18 [ 29.227121] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 29.227127] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 29.227168] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 3 [ 29.227212] ehci_hcd 0000:00:1d.7: debug port 1 [ 29.227220] PCI: cache line size of 128 is not supported by device 0000:00:1d.7 [ 29.227233] ehci_hcd 0000:00:1d.7: irq 18, io mem 0xfb100000 [ 29.231121] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 29.231273] usb usb3: configuration #1 chosen from 1 choice [ 29.231316] hub 3-0:1.0: USB hub found [ 29.231327] hub 3-0:1.0: 8 ports detected [ 29.241205] FDC 0 is a post-1991 82077 [ 29.245966] SCSI subsystem initialized [ 29.254244] libata version 2.21 loaded. [ 29.335167] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low) -> IRQ 19 [ 29.335537] eth0: RealTek RTL8139 at 0xf8838000, 00:50:8d:6c:4d:c0, IRQ 19 [ 29.335542] eth0: Identified 8139 chip type 'RTL-8100B/8139D' [ 29.336673] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 19 [ 29.336689] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 29.336694] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 29.336930] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 [ 29.336965] uhci_hcd 0000:00:1d.2: irq 19, io base 0x0000b400 [ 29.337544] usb usb4: configuration #1 chosen from 1 choice [ 29.337795] hub 4-0:1.0: USB hub found [ 29.337806] hub 4-0:1.0: 2 ports detected [ 29.339236] 8139cp: 10/100 PCI Ethernet driver v1.3 (Mar 22, 2004) [ 29.438518] ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16 [ 29.438536] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 29.438542] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 29.438577] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5 [ 29.438604] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000b800 [ 29.438754] usb usb5: configuration #1 chosen from 1 choice [ 29.438798] hub 5-0:1.0: USB hub found [ 29.438809] hub 5-0:1.0: 2 ports detected [ 29.546752] ata_piix 0000:00:1f.2: version 2.11 [ 29.546762] ata_piix 0000:00:1f.2: MAP [ IDE IDE P0 P1 ] [ 29.546788] ACPI: PCI Interrupt 0000:00:1f.2[A] -> GSI 18 (level, low) -> IRQ 19 [ 29.546846] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 29.546962] scsi0 : ata_piix [ 29.547036] scsi1 : ata_piix [ 29.547232] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001f000 irq 14 [ 29.547239] ata2: SATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001f008 irq 15 [ 29.574089] usb 3-6: new high speed USB device using ehci_hcd and address 2 [ 29.708195] usb 3-6: configuration #1 chosen from 1 choice [ 29.718228] ata1.00: ATA-5: QUANTUM FIREBALLlct20 20, APL.0900, max UDMA/100 [ 29.718235] ata1.00: 39876480 sectors, multi 8: LBA [ 29.764924] ata1.01: ATA-7: ST3320620A, 3.AAD, max UDMA/100 [ 29.764928] ata1.01: 625142448 sectors, multi 16: LBA48 [ 29.764936] ata1.00: limited to UDMA/33 due to 40-wire cable [ 29.778052] ata1.00: configured for UDMA/33 [ 29.833451] usbcore: registered new interface driver libusual [ 29.839576] ata1.01: configured for UDMA/100 [ 29.841842] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 [ 29.841849] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx [ 29.844353] Initializing USB Mass Storage driver... [ 29.844465] scsi2 : SCSI emulation for USB Mass Storage devices [ 29.844537] usb-storage: device found at 2 [ 29.844541] usb-storage: waiting for device to settle before scanning [ 29.844563] usbcore: registered new interface driver usb-storage [ 29.844568] USB Mass Storage support registered. [ 30.312347] ata2.00: ATAPI: TSSTcorp CDDVDW SH-S203N, SB01, max UDMA/100 [ 30.483911] ata2.00: configured for UDMA/100 [ 30.484056] scsi 0:0:0:0: Direct-Access ATA QUANTUM FIREBALL APL. PQ: 0 ANSI: 5 [ 30.484220] scsi 0:0:1:0: Direct-Access ATA ST3320620A 3.AA PQ: 0 ANSI: 5 [ 30.485213] scsi 1:0:0:0: CD-ROM TSSTcorp CDDVDW SH-S203N SB01 PQ: 0 ANSI: 5 [ 30.499518] sd 0:0:0:0: [sda] 39876480 512-byte hardware sectors (20417 MB) [ 30.499542] sd 0:0:0:0: [sda] Write Protect is off [ 30.499547] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.499576] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.499651] sd 0:0:0:0: [sda] 39876480 512-byte hardware sectors (20417 MB) [ 30.499681] sd 0:0:0:0: [sda] Write Protect is off [ 30.499685] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 30.499714] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.499720] sda:sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 30.504922] Uniform CD-ROM driver Revision: 3.20 [ 30.504986] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 30.507382] sda1 sda2 sda3 [ 30.509215] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 30.509246] scsi 0:0:1:0: Attached scsi generic sg1 type 0 [ 30.509274] sr 1:0:0:0: Attached scsi generic sg2 type 5 [ 30.527974] sd 0:0:0:0: [sda] Attached SCSI disk [ 30.528069] sd 0:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 30.528088] sd 0:0:1:0: [sdb] Write Protect is off [ 30.528092] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 30.528120] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.528210] sd 0:0:1:0: [sdb] 625142448 512-byte hardware sectors (320073 MB) [ 30.528228] sd 0:0:1:0: [sdb] Write Protect is off [ 30.528232] sd 0:0:1:0: [sdb] Mode Sense: 00 3a 00 00 [ 30.528321] sd 0:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 30.528326] sdb: sdb1 [ 30.551035] sd 0:0:1:0: [sdb] Attached SCSI disk [ 31.493421] Attempting manual resume [ 31.493426] swsusp: Resume From Partition 8:3 [ 31.493428] PM: Checking swsusp image. [ 31.517167] PM: Resume from disk failed. [ 31.569636] kjournald starting. Commit interval 5 seconds [ 31.569648] EXT3-fs: mounted filesystem with ordered data mode. [ 34.828882] usb-storage: device scan complete [ 34.829501] scsi 2:0:0:0: Direct-Access Generic USB Storage-CFC I20A PQ: 0 ANSI: 0 CCS [ 34.830117] scsi 2:0:0:1: Direct-Access Generic USB Storage-SDC I20A PQ: 0 ANSI: 0 CCS [ 34.830733] scsi 2:0:0:2: Direct-Access Generic USB Storage-SMC I20A PQ: 0 ANSI: 0 CCS [ 34.831363] scsi 2:0:0:3: Direct-Access Generic USB Storage-MSC I20A PQ: 0 ANSI: 0 CCS [ 34.832636] sd 2:0:0:0: [sdc] Attached SCSI removable disk [ 34.832690] sd 2:0:0:0: Attached scsi generic sg3 type 0 [ 34.833623] sd 2:0:0:1: [sdd] Attached SCSI removable disk [ 34.833657] sd 2:0:0:1: Attached scsi generic sg4 type 0 [ 34.834618] sd 2:0:0:2: [sde] Attached SCSI removable disk [ 34.834654] sd 2:0:0:2: Attached scsi generic sg5 type 0 [ 34.835616] sd 2:0:0:3: [sdf] Attached SCSI removable disk [ 34.835654] sd 2:0:0:3: Attached scsi generic sg6 type 0 [ 42.680206] eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 [ 44.487644] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 44.558277] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 44.640142] intel_rng: FWH not detected [ 44.702964] input: PC Speaker as /class/input/input2 [ 44.874403] Linux agpgart interface v0.102 (c) Dave Jones [ 44.890901] agpgart: Detected an Intel 865 Chipset. [ 44.896986] agpgart: AGP aperture is 128M @ 0xf0000000 [ 45.001300] logips2pp: Detected unknown logitech mouse model 127 [ 45.030742] NET: Registered protocol family 10 [ 45.030877] lo: Disabled Privacy Extensions [ 45.297133] iTCO_vendor_support: vendor-support=0 [ 45.298817] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 45.469823] input: ImExPS/2 Logitech Explorer Mouse as /class/input/input3 [ 45.472319] iTCO_wdt: Found a ICH5 or ICH5R TCO device (Version=1, TCOBASE=0x0460) [ 45.472404] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 45.472499] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] [ 45.558979] nvidia: module license 'NVIDIA' taints kernel. [ 45.908623] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 45.908848] NVRM: loading NVIDIA UNIX x86 Kernel Module 100.14.19 Wed Sep 12 14:12:24 PDT 2007 [ 46.183580] ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20 [ 46.183601] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 46.502990] intel8x0_measure_ac97_clock: measured 53766 usecs [ 46.502993] intel8x0: clocking to 48000 [ 47.415449] lp0: using parport0 (interrupt-driven). [ 47.483839] Adding 2216960k swap on /dev/sda3. Priority:-1 extents:1 across:2216960k [ 47.932606] EXT3 FS on sda2, internal journal [ 48.845597] kjournald starting. Commit interval 5 seconds [ 48.845791] EXT3 FS on sda1, internal journal [ 48.845796] EXT3-fs: mounted filesystem with ordered data mode. [ 48.860094] kjournald starting. Commit interval 5 seconds [ 48.865121] EXT3 FS on sdb1, internal journal [ 48.865125] EXT3-fs: mounted filesystem with ordered data mode. [ 49.971908] No dock devices found. [ 49.997470] input: Power Button (FF) as /class/input/input4 [ 49.997498] ACPI: Power Button (FF) [PWRF] [ 49.997561] input: Power Button (CM) as /class/input/input5 [ 49.997583] ACPI: Power Button (CM) [PWRB] [ 51.993010] ppdev: user-space parallel port driver [ 52.412246] audit(1192461747.706:3): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4892 profile="/usr/sbin/cupsd" [ 52.461120] apm: BIOS not found. [ 55.611824] eth0: no IPv6 routers present [ 55.832526] Failure registering capabilities with primary security module. [ 56.401023] Bluetooth: Core ver 2.11 [ 56.401252] NET: Registered protocol family 31 [ 56.401257] Bluetooth: HCI device and connection manager initialized [ 56.401261] Bluetooth: HCI socket layer initialized [ 56.457927] Bluetooth: L2CAP ver 2.8 [ 56.457934] Bluetooth: L2CAP socket layer initialized [ 56.554219] Bluetooth: RFCOMM socket layer initialized [ 56.554608] Bluetooth: RFCOMM TTY layer initialized [ 56.554615] Bluetooth: RFCOMM ver 1.8 [ 60.649082] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0. [ 60.649099] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode [ 60.649133] agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode [ 5016.550807] usb 5-1: new full speed USB device using uhci_hcd and address 2 [ 5016.670496] usb 5-1: device descriptor read/64, error -71 [ 5016.893931] usb 5-1: device descriptor read/64, error -71 [ 5017.109384] usb 5-1: new full speed USB device using uhci_hcd and address 3 [ 5017.229079] usb 5-1: device descriptor read/64, error -71 [ 5017.452510] usb 5-1: device descriptor read/64, error -71 [ 5018.090884] usb 5-1: new full speed USB device using uhci_hcd and address 5 [ 5018.280072] usb 5-1: configuration #1 chosen from 1 choice [ 5018.348814] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3242 [ 5018.349032] usbcore: registered new interface driver usblp [ 5018.349040] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver [ 8901.596036] audit(1192470619.711:4): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=9195 profile="/usr/sbin/cupsd" [ 9887.306574] audit(1192471607.768:5): type=1503 operation="sysctl" requested_mask="r" denied_mask="r" name="/proc/sys/kernel/osrelease" pid=19083 profile="/usr/sbin/cupsd" [ 9887.309212] audit(1192471607.768:6): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/proc/modules" pid=19085 profile="/usr/sbin/cupsd" [ 9887.311113] audit(1192471607.768:7): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/proc/modules" pid=19087 profile="/usr/sbin/cupsd" [ 9887.312981] audit(1192471607.768:8): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/proc/modules" pid=19089 profile="/usr/sbin/cupsd" [ 9887.314809] audit(1192471607.768:9): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/proc/modules" pid=19091 profile="/usr/sbin/cupsd" [ 9887.317252] audit(1192471607.768:10): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.conf" pid=19093 profile="/usr/sbin/cupsd" [ 9887.317286] audit(1192471607.768:11): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19093 profile="/usr/sbin/cupsd" [ 9887.317399] audit(1192471607.768:12): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19093 profile="/usr/sbin/cupsd" [ 9887.317802] audit(1192471607.768:13): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/lib/modules/2.6.22-14-generic/modules.dep" pid=19093 profile="/usr/sbin/cupsd" [ 9887.327917] audit(1192471607.768:14): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.conf" pid=19095 profile="/usr/sbin/cupsd" [ 9887.328362] audit(1192471607.768:15): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19095 profile="/usr/sbin/cupsd" [ 9887.328765] audit(1192471607.768:16): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19095 profile="/usr/sbin/cupsd" [ 9887.329183] audit(1192471607.768:17): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/lib/modules/2.6.22-14-generic/modules.dep" pid=19095 profile="/usr/sbin/cupsd" [ 9887.333630] audit(1192471607.768:18): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.conf" pid=19097 profile="/usr/sbin/cupsd" [ 9887.333662] audit(1192471607.768:19): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19097 profile="/usr/sbin/cupsd" [ 9887.333684] audit(1192471607.768:20): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19097 profile="/usr/sbin/cupsd" [ 9887.333716] audit(1192471607.768:21): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/lib/modules/2.6.22-14-generic/modules.dep" pid=19097 profile="/usr/sbin/cupsd" [ 9887.334116] audit(1192471607.768:22): type=1503 operation="capable" name="sys_rawio" pid=19083 profile="/usr/sbin/cupsd" [ 9887.497638] audit(1192471607.768:23): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=19103 profile="/usr/sbin/cupsd" [ 9887.529516] audit(1192471607.768:24): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=19106 profile="/usr/sbin/cupsd" Oct 15 17:32:26 joel syslogd 1.4.1#21ubuntu3: restart. Oct 15 17:32:26 joel anacron[5112]: Job `cron.daily' terminated Oct 15 17:32:26 joel anacron[5112]: Normal exit (1 job run) Oct 15 17:42:24 joel smbd[5268]: [2007/10/15 17:42:24, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 17:42:24 joel smbd[5268]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 17:42:24 joel smbd[5268]: [2007/10/15 17:42:24, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 17:42:24 joel smbd[5268]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 17:43:58 joel smbd[5312]: [2007/10/15 17:43:58, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 17:43:58 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 17:43:58 joel smbd[5312]: [2007/10/15 17:43:58, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 17:43:58 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 17:55:24 joel smbd[5268]: [2007/10/15 17:55:24, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 17:55:24 joel smbd[5268]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 17:55:24 joel smbd[5268]: [2007/10/15 17:55:24, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 17:55:24 joel smbd[5268]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 17:56:52 joel smbd[5312]: [2007/10/15 17:56:52, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 17:56:52 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 17:56:52 joel smbd[5312]: [2007/10/15 17:56:52, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 17:56:52 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:07:58 joel smbd[5268]: [2007/10/15 18:07:58, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:07:58 joel smbd[5268]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:07:58 joel smbd[5268]: [2007/10/15 18:07:58, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:07:58 joel smbd[5268]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:09:52 joel smbd[5312]: [2007/10/15 18:09:52, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:09:52 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:09:52 joel smbd[5312]: [2007/10/15 18:09:52, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:09:52 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:17:01 joel /USR/SBIN/CRON[8563]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Oct 15 18:20:58 joel smbd[5268]: [2007/10/15 18:20:58, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:20:58 joel smbd[5268]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:20:58 joel smbd[5268]: [2007/10/15 18:20:58, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:20:58 joel smbd[5268]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:22:55 joel smbd[5312]: [2007/10/15 18:22:55, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:22:55 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:22:55 joel smbd[5312]: [2007/10/15 18:22:55, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:22:55 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:32:20 joel smbd[4987]: [2007/10/15 18:32:20, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:32:20 joel smbd[4987]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:32:20 joel smbd[4987]: [2007/10/15 18:32:20, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:32:20 joel smbd[4987]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:35:54 joel smbd[5312]: [2007/10/15 18:35:54, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:35:54 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:35:54 joel smbd[5312]: [2007/10/15 18:35:54, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:35:54 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:44:57 joel NetworkManager: <info> Updating allowed wireless network lists. Oct 15 18:44:57 joel NetworkManager: <WARN> nm_dbus_get_networks_cb(): error received: org.freedesktop.NetworkManagerInfo.NoNetworks - org.freedesktop.NetworkManagerInfo.NoNetworks. Oct 15 18:45:24 joel kernel: [ 5016.550807] usb 5-1: new full speed USB device using uhci_hcd and address 2 Oct 15 18:45:25 joel kernel: [ 5016.670496] usb 5-1: device descriptor read/64, error -71 Oct 15 18:45:25 joel kernel: [ 5016.893931] usb 5-1: device descriptor read/64, error -71 Oct 15 18:45:25 joel kernel: [ 5017.109384] usb 5-1: new full speed USB device using uhci_hcd and address 3 Oct 15 18:45:25 joel kernel: [ 5017.229079] usb 5-1: device descriptor read/64, error -71 Oct 15 18:45:25 joel kernel: [ 5017.452510] usb 5-1: device descriptor read/64, error -71 Oct 15 18:45:26 joel kernel: [ 5018.090884] usb 5-1: new full speed USB device using uhci_hcd and address 5 Oct 15 18:45:26 joel NetworkManager: <debug> [1192466726.639131] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_3242_2736BAAW831392W0'). Oct 15 18:45:26 joel kernel: [ 5018.280072] usb 5-1: configuration #1 chosen from 1 choice Oct 15 18:45:26 joel kernel: [ 5018.348814] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 5 if 0 alt 0 proto 2 vid 0x04E8 pid 0x3242 Oct 15 18:45:26 joel kernel: [ 5018.349032] usbcore: registered new interface driver usblp Oct 15 18:45:26 joel kernel: [ 5018.349040] /build/buildd/linux-source-2.6.22-2.6.22/drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver Oct 15 18:45:26 joel NetworkManager: <debug> [1192466726.715609] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_3242_2736BAAW831392W0_if0'). Oct 15 18:45:26 joel NetworkManager: <debug> [1192466726.762475] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_3242_2736BAAW831392W0_if0_printer_noserial'). Oct 15 18:45:26 joel NetworkManager: <debug> [1192466726.763263] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/usb_device_4e8_3242_2736BAAW831392W0_usbraw'). Oct 15 18:46:05 joel smbd[8565]: [2007/10/15 18:46:05, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:46:05 joel smbd[8565]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:46:05 joel smbd[8565]: [2007/10/15 18:46:05, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:46:05 joel smbd[8565]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:48:39 joel smbd[5312]: [2007/10/15 18:48:39, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:48:39 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:48:39 joel smbd[5312]: [2007/10/15 18:48:39, 0] printing/pcap.c:pcap_cache_reload(159) Oct 15 18:48:39 joel smbd[5312]: Unable to open printcap file /var/run/cups/printcap for read! Oct 15 18:55:59 joel smbd[8565]: [2007/10/15 18:55:59, 0] lib/util_sock.c:read_data(534) Oct 15 18:55:59 joel smbd[8565]: read_data: read failure for 4 bytes to client 192.168.25.169. Error = No route to host Oct 15 19:17:01 joel /USR/SBIN/CRON[8821]: (root) CMD ( cd / && run-parts --report /etc/cron.hourly) Oct 15 19:42:26 joel -- MARK -- Oct 15 19:50:19 joel kernel: [ 8901.596036] audit(1192470619.711:4): type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=9195 profile="/usr/sbin/cupsd" Oct 15 20:02:26 joel -- MARK -- Oct 15 20:06:48 joel kernel: [ 9887.306574] audit(1192471607.768:5): type=1503 operation="sysctl" requested_mask="r" denied_mask="r" name="/proc/sys/kernel/osrelease" pid=19083 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel rmmod: FATAL: can't open /proc/modules: Permission denied Oct 15 20:06:48 joel kernel: [ 9887.309212] audit(1192471607.768:6): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/proc/modules" pid=19085 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel rmmod: FATAL: can't open /proc/modules: Permission denied Oct 15 20:06:48 joel kernel: [ 9887.311113] audit(1192471607.768:7): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/proc/modules" pid=19087 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel rmmod: FATAL: can't open /proc/modules: Permission denied Oct 15 20:06:48 joel kernel: [ 9887.312981] audit(1192471607.768:8): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/proc/modules" pid=19089 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel rmmod: FATAL: can't open /proc/modules: Permission denied Oct 15 20:06:48 joel kernel: [ 9887.314809] audit(1192471607.768:9): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/proc/modules" pid=19091 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.317252] audit(1192471607.768:10): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.conf" pid=19093 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.317286] audit(1192471607.768:11): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19093 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.317399] audit(1192471607.768:12): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19093 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.317802] audit(1192471607.768:13): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/lib/modules/2.6.22-14-generic/modules.dep" pid=19093 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.327917] audit(1192471607.768:14): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.conf" pid=19095 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.328362] audit(1192471607.768:15): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19095 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.328765] audit(1192471607.768:16): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19095 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.329183] audit(1192471607.768:17): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/lib/modules/2.6.22-14-generic/modules.dep" pid=19095 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.333630] audit(1192471607.768:18): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.conf" pid=19097 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.333662] audit(1192471607.768:19): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19097 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.333684] audit(1192471607.768:20): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/etc/modprobe.d/" pid=19097 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.333716] audit(1192471607.768:21): type=1503 operation="inode_permission" requested_mask="r" denied_mask="r" name="/lib/modules/2.6.22-14-generic/modules.dep" pid=19097 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.334116] audit(1192471607.768:22): type=1503 operation="capable" name="sys_rawio" pid=19083 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.497638] audit(1192471607.768:23): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=19103 profile="/usr/sbin/cupsd" Oct 15 20:06:48 joel kernel: [ 9887.529516] audit(1192471607.768:24): type=1503 operation="inode_permission" requested_mask="rw" denied_mask="rw" name="/dev/tty" pid=19106 profile="/usr/sbin/cupsd" -- After update from Feisty to Gutsy RC, print jobs fail: "/usr/lib/cups/backend/mfp failed" https://bugs.launchpad.net/bugs/152537 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
