olerem: I applied the patch to au6601.c from
http://ppa.launchpad.net/iacobs/au6601/ubuntu/pool/main/a/au6601/au6601_0.3.orig.tar.gz
and compiled the module.

When inserting the module, I get these messages:

Feb 23 16:51:39 kunigunde kernel: au6601-pci 0000:02:00.0: AU6601 controller 
found [1aea:6601] (rev 0)                                                       
                                                                                
                                  
Feb 23 16:51:39 kunigunde kernel: au6601-pci 0000:02:00.0: enabling device 
(0004 -> 0006)                                                                  
                                                                                
                                    
Feb 23 16:51:44 kunigunde kernel: au6601-pci 0000:02:00.0: Got data interrupt 
0x00100000 even though no data operation was in progress.                       
                                                                                
                                 
Feb 23 16:51:44 kunigunde kernel: au6601-pci 0000:02:00.0: 0xFFFF7FFF got 
unhandled IRQ with 1008000
Feb 23 16:51:49 kunigunde kernel: au6601-pci 0000:02:00.0: Got data interrupt 
0x00100000 even though no data operation was in progress.
Feb 23 16:51:49 kunigunde kernel: au6601-pci 0000:02:00.0: 0xFFFF7FFF got 
unhandled IRQ with 1008000

The last two repeat continuously.

When inserting a card, I get this:

Feb 23 16:52:54 kunigunde kernel: mmc0: host does not support reading read-only 
switch, assuming write-enable
Feb 23 16:52:54 kunigunde kernel: mmc0: new high speed SDHC card at address 0007
Feb 23 16:52:54 kunigunde kernel: mmcblk0: mmc0:0007 SD32G 29.0 GiB 
Feb 23 16:52:59 kunigunde kernel: au6601-pci 0000:02:00.0: 0xFFFF7FFF got 
unhandled IRQ with 3008000
Feb 23 16:52:59 kunigunde kernel: mmcblk0: error -110 transferring data, sector 
0, nr 8, cmd response 0x900, card status 0xb00
Feb 23 16:52:59 kunigunde kernel: mmc0: tried to reset card
Feb 23 16:53:04 kunigunde kernel: au6601-pci 0000:02:00.0: 0xFFFF7FFF got 
unhandled IRQ with 6008000
Feb 23 16:53:04 kunigunde kernel: mmcblk0: error -110 transferring data, sector 
0, nr 8, cmd response 0x900, card status 0xb00
Feb 23 16:53:04 kunigunde kernel: mmcblk0: retrying using single block read
Feb 23 16:53:09 kunigunde kernel: au6601-pci 0000:02:00.0: 0xFFFF7FFF got 
unhandled IRQ with 6008000
Feb 23 16:53:09 kunigunde kernel: mmcblk0: error -110 transferring data, sector 
0, nr 8, cmd response 0x900, card status 0x0
Feb 23 16:53:09 kunigunde kernel: blk_update_request: I/O error, dev mmcblk0, 
sector 0
Feb 23 16:53:14 kunigunde kernel: au6601-pci 0000:02:00.0: 0xFFFF7FFF got 
unhandled IRQ with 6008000

The last three lines then continue repeatedly.

-- 
You received this bug notification because you are a member of Ubuntu
Bugs, which is subscribed to Ubuntu.
https://bugs.launchpad.net/bugs/1270676

Title:
  SD Card Reader broken on UX302LG

To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1270676/+subscriptions

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to