hi brian,
...here are the files you need from failed start of gutsy beta.
hope i can help


Am Donnerstag, den 27.09.2007, 19:00 +0000 schrieb Brian Murray:

> Thank you for taking the time to report this bug and helping to make
> Ubuntu better.  Could you please add your '/etc/X11/xorg.conf' file,
> your '/var/log/Xorg.0.log' file and the full output of 'lspci -vvnn' as
> attachments to your bug report?  Thanks in advance.
> 
> ** Changed in: xorg (Ubuntu)
>        Status: New => Incomplete
> 


00:00.0 Host bridge [0600]: Intel Corporation 82855PM Processor to I/O 
Controller [8086:3340] (rev 21)
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort+ >SERR- <PERR-
        Latency: 0
        Region 0: Memory at e0000000 (32-bit, prefetchable) [size=256M]
        Capabilities: <access denied>

00:01.0 PCI bridge [0604]: Intel Corporation 82855PM Processor to AGP 
Controller [8086:3341] (rev 21) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR-
        Latency: 96
        Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
        I/O behind bridge: 00003000-00003fff
        Memory behind bridge: d0100000-d01fffff
        Prefetchable memory behind bridge: d8000000-dfffffff
        Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort+ <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-

00:1d.0 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #1 [8086:24c2] (rev 03) (prog-if 00 
[UHCI])
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 4: I/O ports at 1800 [size=32]

00:1d.1 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #2 [8086:24c4] (rev 03) (prog-if 00 
[UHCI])
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 5
        Region 4: I/O ports at 1820 [size=32]

00:1d.2 USB Controller [0c03]: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) USB UHCI Controller #3 [8086:24c7] (rev 03) (prog-if 00 
[UHCI])
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin C routed to IRQ 11
        Region 4: I/O ports at 1840 [size=32]

00:1d.7 USB Controller [0c03]: Intel Corporation 82801DB/DBM (ICH4/ICH4-M) USB2 
EHCI Controller [8086:24cd] (rev 03) (prog-if 20 [EHCI])
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin D routed to IRQ 5
        Region 0: Memory at d0000000 (32-bit, non-prefetchable) [size=1K]
        Capabilities: <access denied>

00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge 
[8086:2448] (rev 83) (prog-if 00 [Normal decode])
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- 
<MAbort- >SERR- <PERR+
        Latency: 0
        Bus: primary=00, secondary=02, subordinate=07, sec-latency=64
        I/O behind bridge: 00004000-00004fff
        Memory behind bridge: d0200000-d02fffff
        Prefetchable memory behind bridge: 50000000-57ffffff
        Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- <SERR- <PERR-
        BridgeCtl: Parity- SERR- NoISA+ VGA- MAbort- >Reset- FastB2B-

00:1f.0 ISA bridge [0601]: Intel Corporation 82801DBM (ICH4-M) LPC Interface 
Bridge [8086:24cc] (rev 03)
        Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0

00:1f.1 IDE interface [0101]: Intel Corporation 82801DBM (ICH4-M) IDE 
Controller [8086:24ca] (rev 03) (prog-if 8a [Master SecP PriP])
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin A routed to IRQ 11
        Region 0: I/O ports at 01f0 [size=8]
        Region 1: I/O ports at 03f4 [size=1]
        Region 2: I/O ports at 0170 [size=8]
        Region 3: I/O ports at 0374 [size=1]
        Region 4: I/O ports at 1860 [size=16]
        Region 5: Memory at 58000000 (32-bit, non-prefetchable) [size=1K]

00:1f.3 SMBus [0c05]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) 
SMBus Controller [8086:24c3] (rev 03)
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 0
        Region 4: I/O ports at 1100 [size=32]

00:1f.5 Multimedia audio controller [0401]: Intel Corporation 82801DB/DBL/DBM 
(ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller [8086:24c5] (rev 03)
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 0
        Interrupt: pin B routed to IRQ 5
        Region 0: I/O ports at 1c00 [size=256]
        Region 1: I/O ports at 1880 [size=64]
        Region 2: Memory at d0000c00 (32-bit, non-prefetchable) [size=512]
        Region 3: Memory at d0000800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

00:1f.6 Modem [0703]: Intel Corporation 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) 
AC'97 Modem Controller [8086:24c6] (rev 03) (prog-if 00 [Generic])
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin B routed to IRQ 5
        Region 0: I/O ports at 2400 [size=256]
        Region 1: I/O ports at 2000 [size=128]
        Capabilities: <access denied>

01:00.0 VGA compatible controller [0300]: ATI Technologies Inc RV350 [Mobility 
Radeon 9600 M10] [1002:4e50] (prog-if 00 [VGA])
        Subsystem: Samsung Electronics Co Ltd P35 notebook [144d:c00c]
        Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B+
        Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Interrupt: pin A routed to IRQ 11
        Region 0: Memory at d8000000 (32-bit, prefetchable) [size=128M]
        Region 1: I/O ports at 3000 [size=256]
        Region 2: Memory at d0100000 (32-bit, non-prefetchable) [size=64K]
        [virtual] Expansion ROM at d0120000 [disabled] [size=128K]
        Capabilities: <access denied>

02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. 
RTL-8139/8139C/8139C+ [10ec:8139] (rev 10)
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (8000ns min, 16000ns max)
        Interrupt: pin A routed to IRQ 5
        Region 0: I/O ports at 4000 [size=256]
        Region 1: Memory at d0201800 (32-bit, non-prefetchable) [size=256]
        Capabilities: <access denied>

02:01.0 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at d0202000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=03, subordinate=03, sec-latency=176
        Memory window 0: 50000000-53fff000 (prefetchable)
        Memory window 1: 5c000000-5ffff000
        I/O window 0: 00004400-000044ff
        I/O window 1: 00004800-000048ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

02:01.1 CardBus bridge [0607]: Ricoh Co Ltd RL5c476 II [1180:0476] (rev ac)
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR- FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 168
        Interrupt: pin B routed to IRQ 11
        Region 0: Memory at d0203000 (32-bit, non-prefetchable) [size=4K]
        Bus: primary=02, secondary=04, subordinate=07, sec-latency=176
        Memory window 0: 54000000-57fff000 (prefetchable)
        Memory window 1: 60000000-63fff000
        I/O window 0: 00004c00-00004cff
        I/O window 1: 00001400-000014ff
        BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
        16-bit legacy interface ports at 0001

02:01.2 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C552 IEEE 1394 Controller 
[1180:0552] (rev 04) (prog-if 10 [OHCI])
        Subsystem: Samsung Electronics Co Ltd P30/P35 notebook [144d:c00c]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (500ns min, 1000ns max)
        Interrupt: pin C routed to IRQ 11
        Region 0: Memory at d0201000 (32-bit, non-prefetchable) [size=2K]
        Capabilities: <access denied>

02:02.0 Network controller [0280]: Intel Corporation PRO/Wireless 2200BG 
Network Connection [8086:4220] (rev 05)
        Subsystem: Intel Corporation Samsung P35 integrated WLAN [8086:2731]
        Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- 
Stepping- SERR+ FastB2B-
        Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- 
<TAbort- <MAbort- >SERR- <PERR-
        Latency: 64 (750ns min, 6000ns max), Cache Line Size: 32 bytes
        Interrupt: pin A routed to IRQ 5
        Region 0: Memory at d0200000 (32-bit, non-prefetchable) [size=4K]
        Capabilities: <access denied>


# xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
EndSection

Section "InputDevice"
        Identifier      "Generic Keyboard"
        Driver          "kbd"
        Option          "CoreKeyboard"
        Option          "XkbRules"      "xorg"
        Option          "XkbModel"      "pc105"
        Option          "XkbLayout"     "us"
EndSection

Section "InputDevice"
        Identifier      "Configured Mouse"
        Driver          "mouse"
        Option          "CorePointer"
        Option          "Device"                "/dev/input/mice"
        Option          "Protocol"              "ImPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Emulate3Buttons"       "true"
EndSection

Section "InputDevice"
        Identifier      "Synaptics Touchpad"
        Driver          "synaptics"
        Option          "SendCoreEvents"        "true"
        Option          "Device"                "/dev/psaux"
        Option          "Protocol"              "auto-dev"
        Option          "HorizScrollDelta"      "0"
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "stylus"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"          "stylus"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "eraser"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"          "eraser"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "InputDevice"
        Driver          "wacom"
        Identifier      "cursor"
        Option          "Device"        "/dev/input/wacom"
        Option          "Type"          "cursor"
        Option          "ForceDevice"   "ISDV4"         # Tablet PC ONLY
EndSection

Section "Device"
        Identifier      "ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]"
        Driver          "ati"
        BusID           "PCI:1:0:0"
EndSection

Section "Monitor"
        Identifier      "Generic Monitor"
        Option          "DPMS"
EndSection

Section "Screen"
        Identifier      "Default Screen"
        Device          "ATI Technologies Inc RV350 [Mobility Radeon 9600 M10]"
        Monitor         "Generic Monitor"
        DefaultDepth    24
        SubSection "Display"
                Modes           "1400x1050"
        EndSubSection
EndSection

Section "ServerLayout"
        Identifier      "Default Layout"
        Screen          "Default Screen"
        InputDevice     "Generic Keyboard"
        InputDevice     "Configured Mouse"

# Uncomment if you have a wacom tablet
#       InputDevice     "stylus"        "SendCoreEvents"
#       InputDevice     "cursor"        "SendCoreEvents"
#       InputDevice     "eraser"        "SendCoreEvents"
        InputDevice     "Synaptics Touchpad"
EndSection

-- 
gutsy beta: xserver failed on laptop with ati radeon 9700
https://bugs.launchpad.net/bugs/145646
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to