I have a similar problem. I have an acer aspire 5570 2067. Wireless was
working fine with ndiswrapper on the atheros chipset on gutsy, but as of
the update this evening 9/20/2007, the wireless shows one orange bar
signal strength and refuses to connect when I know my WAP is working
fine.
I noted also that restricted driver manager shows atheros Hardware
Access Layer as enabled but with a red dot signifying "not in use". This
state is maintained even after disabling and re-enabling the driver and
rebooting.
[EMAIL PROTECTED]:~$ uname -a
Linux acer 2.6.22-11-generic #1 SMP Mon Sep 17 03:45:58 GMT 2007 i686 GNU/Linux
[EMAIL PROTECTED]:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and
945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS,
943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML
Express Integrated Graphics Controller (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition
Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1
(rev 02)
00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2
(rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3
(rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI
Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge
(rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE
Controller (rev 02)
00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 02)
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8038 PCI-E Fast
Ethernet Controller (rev 14)
03:00.0 Ethernet controller: Atheros Communications, Inc. AR5006EG 802.11 b/g
Wireless PCI Express Adapter (rev 01)
0a:09.0 CardBus bridge: Texas Instruments PCIxx12 Cardbus Controller
0a:09.2 Mass storage controller: Texas Instruments 5-in-1 Multimedia Card
Reader (SD/MMC/MS/MS PRO/xD)
[EMAIL PROTECTED]:~$ dmesg
[ 0.000000] Linux version 2.6.22-11-generic ([EMAIL PROTECTED]) (gcc version
4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Mon Sep 17
03:45:58 GMT 2007 (Ubuntu 2.6.22-11.33-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e000 (usable)
[ 0.000000] BIOS-e820: 000000000009e000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000dc000 - 00000000000e0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003f690000 (usable)
[ 0.000000] BIOS-e820: 000000003f690000 - 000000003f700000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] 118MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000f6680
[ 0.000000] Entering add_active_range(0, 0, 259728) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259728
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259728
[ 0.000000] On node 0 totalpages: 259728
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 237 pages used for memmap
[ 0.000000] HighMem zone: 30115 pages, LIFO batch:7
[ 0.000000] DMI present.
[ 0.000000] ACPI: RSDP 000F6650, 0024 (r2 PTLTD )
[ 0.000000] ACPI: XSDT 3F6911F3, 0064 (r1 ACRSYS ACRPRDCT 6040000 LTP
0)
[ 0.000000] ACPI: FACP 3F69AC2A, 00F4 (r3 INTEL CALISTGA 6040000 ALAN
1)
[ 0.000000] ACPI: DSDT 3F691F78, 8C3E (r2 INTEL CALISTGA 6040000 MSFT
3000000)
[ 0.000000] ACPI: FACS 3F69BFC0, 0040
[ 0.000000] ACPI: APIC 3F69AD1E, 0068 (r1 INTEL CALISTGA 6040000 LOHR
5A)
[ 0.000000] ACPI: HPET 3F69AD86, 0038 (r1 INTEL CALISTGA 6040000 LOHR
5A)
[ 0.000000] ACPI: MCFG 3F69ADBE, 003C (r1 INTEL CALISTGA 6040000 LOHR
5A)
[ 0.000000] ACPI: APIC 3F69ADFA, 0068 (r1 PTLTD APIC 6040000 LTP
0)
[ 0.000000] ACPI: BOOT 3F69AE62, 0028 (r1 PTLTD $SBFTBL$ 6040000 LTP
1)
[ 0.000000] ACPI: SLIC 3F69AE8A, 0176 (r1 ACRSYS ACRPRDCT 6040000 acer
0)
[ 0.000000] ACPI: SSDT 3F691257, 04E6 (r1 PmRef CpuPm 3000 INTL
20050624)
[ 0.000000] ACPI: BIOS bug: multiple APIC/MADT found, using 0
[ 0.000000] ACPI: If "acpi_apic_instance=2" works better, notify [EMAIL
PROTECTED]
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 6:14 APIC version 20
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:a0000000)
[ 0.000000] Built 1 zonelists. Total pages: 257699
[ 0.000000] Kernel command line:
root=UUID=a84e13dc-55a4-49d9-a464-f732b0f1eb6e ro quiet splash
[ 0.000000] mapped APIC to ffffd000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffc000 (fec00000)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] Detected 1733.488 MHz processor.
[ 12.623400] Console: colour VGA+ 80x25
[ 12.623678] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 12.624060] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 12.655312] Memory: 1018556k/1038912k available (2017k kernel code, 19684k
reserved, 918k data, 364k init, 121408k highmem)
[ 12.655322] virtual kernel memory layout:
[ 12.655323] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB)
[ 12.655324] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 12.655326] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 12.655327] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 12.655328] .init : 0xc03e3000 - 0xc043e000 ( 364 kB)
[ 12.655329] .data : 0xc02f8436 - 0xc03ddea4 ( 918 kB)
[ 12.655331] .text : 0xc0100000 - 0xc02f8436 (2017 kB)
[ 12.655334] Checking if this processor honours the WP bit even in supervisor
mode... Ok.
[ 12.655371] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=2,
Nodes=1
[ 12.655513] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 12.655518] hpet0: 3 64-bit timers, 14318180 Hz
[ 12.736436] Calibrating delay using timer specific routine.. 3470.67
BogoMIPS (lpj=6941356)
[ 12.736459] Security Framework v1.0.0 initialized
[ 12.736467] SELinux: Disabled at boot.
[ 12.736482] Mount-cache hash table entries: 512
[ 12.736608] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000
[ 12.736616] monitor/mwait feature present.
[ 12.736618] using mwait in idle threads.
[ 12.736623] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 12.736625] CPU: L2 cache: 1024K
[ 12.736628] CPU: Physical Processor ID: 0
[ 12.736630] CPU: Processor Core ID: 0
[ 12.736632] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940
0000c189 00000000 00000000
[ 12.736641] Compat vDSO mapped to ffffe000.
[ 12.736654] Checking 'hlt' instruction... OK.
[ 12.752536] SMP alternatives: switching to UP code
[ 12.753009] Early unpacking initramfs... done
[ 13.079108] ACPI: Core revision 20070126
[ 13.079189] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not
found.
[ 13.083269] CPU0: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz
stepping 0c
[ 13.083288] SMP alternatives: switching to SMP code
[ 13.083426] Booting processor 1/1 eip 3000
[ 13.093549] Initializing CPU#1
[ 13.171876] Calibrating delay using timer specific routine.. 3466.85
BogoMIPS (lpj=6933708)
[ 13.171883] CPU: After generic identify, caps: bfe9fbff 00100000 00000000
00000000 0000c189 00000000 00000000
[ 13.171888] monitor/mwait feature present.
[ 13.171891] CPU: L1 I cache: 32K, L1 D cache: 32K
[ 13.171893] CPU: L2 cache: 1024K
[ 13.171896] CPU: Physical Processor ID: 0
[ 13.171897] CPU: Processor Core ID: 1
[ 13.171899] CPU: After all inits, caps: bfe9fbff 00100000 00000000 00002940
0000c189 00000000 00000000
[ 13.172306] CPU1: Intel Genuine Intel(R) CPU T2080 @ 1.73GHz
stepping 0c
[ 13.172331] Total of 2 processors activated (6937.53 BogoMIPS).
[ 13.172529] ENABLING IO-APIC IRQs
[ 13.172736] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 13.319787] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 13.339783] Brought up 2 CPUs
[ 13.424516] migration_cost=53
[ 13.424659] Booting paravirtualized kernel on bare hardware
[ 13.424736] Time: 19:42:38 Date: 08/20/107
[ 13.424759] NET: Registered protocol family 16
[ 13.424849] EISA bus registered
[ 13.424854] ACPI: bus type pci registered
[ 13.449927] PCI: PCI BIOS revision 2.10 entry at 0xfd6c2, last bus=12
[ 13.449930] PCI: Using configuration type 1
[ 13.449931] Setting up standard PCI resources
[ 13.451952] ACPI: EC: Look up EC in DSDT
[ 13.452653] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 13.470938] ACPI: System BIOS is requesting _OSI(Linux)
[ 13.470941] ACPI: Please test with "acpi_osi=!Linux"
[ 13.470942] Please send dmidecode to [EMAIL PROTECTED]
[ 13.471404] ACPI: Interpreter enabled
[ 13.471407] ACPI: (supports S0 S3 S4 S5)
[ 13.471423] ACPI: Using IOAPIC for interrupt routing
[ 13.477078] ACPI: EC: GPE=0x17, ports=0x66, 0x62
[ 13.477130] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 13.477140] PCI: Probing PCI hardware (bus 00)
[ 13.477897] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 13.477902] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[ 13.478743] PCI: Transparent bridge - 0000:00:1e.0
[ 13.478885] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 13.479195] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 13.479326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 13.479454] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 13.479602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 13.484171] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15)
*11
[ 13.484276] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 13.484377] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 13.484478] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15)
*10
[ 13.484579] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 13.484680] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 13.484780] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 13.484881] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 13.484999] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 13.485010] pnp: PnP ACPI init
[ 13.485018] ACPI: bus type pnp registered
[ 13.487744] pnp: PnP ACPI: found 9 devices
[ 13.487746] ACPI: ACPI bus type pnp unregistered
[ 13.487749] PnPBIOS: Disabled by ACPI PNP
[ 13.487800] PCI: Using ACPI for IRQ routing
[ 13.487802] PCI: If a device doesn't work, try "pci=routeirq". If it helps,
post a report
[ 13.487806] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.0
[ 13.487858] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.0
[ 13.487905] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.0
[ 13.487953] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.1
[ 13.488001] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.1
[ 13.488048] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.1
[ 13.488097] PCI: Cannot allocate resource region 7 of bridge 0000:00:1c.2
[ 13.488144] PCI: Cannot allocate resource region 8 of bridge 0000:00:1c.2
[ 13.488191] PCI: Cannot allocate resource region 9 of bridge 0000:00:1c.2
[ 13.517507] NET: Registered protocol family 8
[ 13.517509] NET: Registered protocol family 20
[ 13.517585] pnp: 00:01: iomem range 0xe0000000-0xefffffff could not be
reserved
[ 13.517589] pnp: 00:01: iomem range 0xfed14000-0xfed17fff could not be
reserved
[ 13.517592] pnp: 00:01: iomem range 0xfed18000-0xfed18fff could not be
reserved
[ 13.517596] pnp: 00:01: iomem range 0xfed19000-0xfed19fff could not be
reserved
[ 13.517602] pnp: 00:03: iomem range 0xfed00000-0xfed003ff could not be
reserved
[ 13.519441] Time: tsc clocksource has been installed.
[ 13.519457] Switched to high resolution mode on CPU 0
[ 13.519546] Switched to high resolution mode on CPU 1
[ 13.547940] PCI: Bridge: 0000:00:1c.0
[ 13.547943] IO window: 2000-2fff
[ 13.547950] MEM window: 54000000-540fffff
[ 13.547955] PREFETCH window: disabled.
[ 13.547970] PCI: Bridge: 0000:00:1c.1
[ 13.547971] IO window: disabled.
[ 13.547977] MEM window: 54100000-541fffff
[ 13.547982] PREFETCH window: disabled.
[ 13.547988] PCI: Bridge: 0000:00:1c.2
[ 13.547989] IO window: disabled.
[ 13.547995] MEM window: disabled.
[ 13.547999] PREFETCH window: disabled.
[ 13.548007] PCI: Bus 11, cardbus bridge: 0000:0a:09.0
[ 13.548009] IO window: 00003000-000030ff
[ 13.548015] IO window: 00003400-000034ff
[ 13.548020] PREFETCH window: 50000000-53ffffff
[ 13.548025] MEM window: 58000000-5bffffff
[ 13.548031] PCI: Bridge: 0000:00:1e.0
[ 13.548034] IO window: 3000-3fff
[ 13.548040] MEM window: d0200000-d02fffff
[ 13.548045] PREFETCH window: 50000000-53ffffff
[ 13.548074] PCI: Enabling device 0000:00:1c.0 (0000 -> 0003)
[ 13.548082] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 13.548090] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 13.548114] PCI: Enabling device 0000:00:1c.1 (0000 -> 0002)
[ 13.548119] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 17 (level, low) ->
IRQ 17
[ 13.548126] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 13.548151] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 13.548159] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 13.548170] PCI: Enabling device 0000:00:1e.0 (0004 -> 0007)
[ 13.548177] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 13.548194] PCI: Enabling device 0000:0a:09.0 (0000 -> 0003)
[ 13.548199] ACPI: PCI Interrupt 0000:0a:09.0[A] -> GSI 20 (level, low) ->
IRQ 19
[ 13.548217] NET: Registered protocol family 2
[ 13.595334] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 13.595405] TCP established hash table entries: 131072 (order: 8, 1572864
bytes)
[ 13.596485] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 13.596868] TCP: Hash tables configured (established 131072 bind 65536)
[ 13.596872] TCP reno registered
[ 13.611449] checking if image is initramfs... it is
[ 14.257984] Freeing initrd memory: 6843k freed
[ 14.258104] Simple Boot Flag at 0x36 set to 0x1
[ 14.258639] audit: initializing netlink socket (disabled)
[ 14.258654] audit(1190317359.240:1): initialized
[ 14.258760] highmem bounce pool size: 64 pages
[ 14.260710] VFS: Disk quotas dquot_6.5.1
[ 14.260765] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 14.260865] io scheduler noop registered
[ 14.260868] io scheduler anticipatory registered
[ 14.260870] io scheduler deadline registered
[ 14.260887] io scheduler cfq registered (default)
[ 14.260902] Boot video device is 0000:00:02.0
[ 14.261084] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 14.261143] assign_interrupt_mode Found MSI capability
[ 14.261193] Allocate Port Service[0000:00:1c.0:pcie00]
[ 14.261232] Allocate Port Service[0000:00:1c.0:pcie02]
[ 14.261333] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 14.261391] assign_interrupt_mode Found MSI capability
[ 14.261438] Allocate Port Service[0000:00:1c.1:pcie00]
[ 14.261473] Allocate Port Service[0000:00:1c.1:pcie02]
[ 14.261576] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 14.261635] assign_interrupt_mode Found MSI capability
[ 14.261681] Allocate Port Service[0000:00:1c.2:pcie00]
[ 14.261713] Allocate Port Service[0000:00:1c.2:pcie02]
[ 14.261912] isapnp: Scanning for PnP cards...
[ 14.615407] isapnp: No Plug & Play device found
[ 14.640775] Real Time Clock Driver v1.12ac
[ 14.641001] hpet_resources: 0xfed00000 is busy
[ 14.641037] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing
enabled
[ 14.642300] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024
blocksize
[ 14.642529] input: Macintosh mouse button emulation as /class/input/input0
[ 14.642605] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64
irq 1,12
[ 14.655991] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 14.663571] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 14.663577] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 14.663580] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 14.663585] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 14.663588] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 14.663769] mice: PS/2 mouse device common for all mice
[ 14.664388] EISA: Probing bus 0 at eisa.0
[ 14.664397] Cannot allocate resource for EISA slot 1
[ 14.664400] Cannot allocate resource for EISA slot 2
[ 14.664402] Cannot allocate resource for EISA slot 3
[ 14.664424] EISA: Detected 0 cards.
[ 14.664520] TCP cubic registered
[ 14.664536] NET: Registered protocol family 1
[ 14.664559] Using IPI No-Shortcut mode
[ 14.664717] Magic number: 7:222:749
[ 14.664722] hash matches device ttyS0
[ 14.665059] Freeing unused kernel memory: 364k freed
[ 14.706694] input: AT Translated Set 2 keyboard as /class/input/input1
[ 15.879848] Capability LSM initialized
[ 15.888506] ACPI: SSDT 3F691C78, 0238 (r1 PmRef Cpu0Ist 3000 INTL
20050624)
[ 15.888735] ACPI: SSDT 3F69173D, 04B6 (r1 PmRef Cpu0Cst 3001 INTL
20050624)
[ 15.889237] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 15.889242] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 15.889474] ACPI: SSDT 3F691EB0, 00C8 (r1 PmRef Cpu1Ist 3000 INTL
20050624)
[ 15.889681] ACPI: SSDT 3F691BF3, 0085 (r1 PmRef Cpu1Cst 3000 INTL
20050624)
[ 15.890208] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[ 15.890213] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.116000] Marking TSC unstable due to: possible TSC halt in C2.
[ 3.116000] ACPI: Thermal Zone [THRM] (50 C)
[ 3.120000] Time: hpet clocksource has been installed.
[ 3.540000] usbcore: registered new interface driver usbfs
[ 3.540000] usbcore: registered new interface driver hub
[ 3.544000] usbcore: registered new device driver usb
[ 3.576000] USB Universal Host Controller Interface driver v3.0
[ 3.576000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) ->
IRQ 20
[ 3.576000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 3.576000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 3.576000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 3.576000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x00001820
[ 3.576000] usb usb1: configuration #1 chosen from 1 choice
[ 3.576000] hub 1-0:1.0: USB hub found
[ 3.576000] hub 1-0:1.0: 2 ports detected
[ 3.596000] SCSI subsystem initialized
[ 3.600000] libata version 2.21 loaded.
[ 3.680000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) ->
IRQ 21
[ 3.680000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 3.680000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 3.680000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 3.680000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x00001840
[ 3.680000] usb usb2: configuration #1 chosen from 1 choice
[ 3.680000] hub 2-0:1.0: USB hub found
[ 3.680000] hub 2-0:1.0: 2 ports detected
[ 3.784000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) ->
IRQ 18
[ 3.784000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 3.784000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 3.784000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 3.784000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 3.784000] usb usb3: configuration #1 chosen from 1 choice
[ 3.784000] hub 3-0:1.0: USB hub found
[ 3.784000] hub 3-0:1.0: 2 ports detected
[ 3.888000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) ->
IRQ 16
[ 3.888000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 3.888000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 3.888000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 3.888000] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 3.888000] usb usb4: configuration #1 chosen from 1 choice
[ 3.888000] hub 4-0:1.0: USB hub found
[ 3.888000] hub 4-0:1.0: 2 ports detected
[ 3.992000] ata_piix 0000:00:1f.2: version 2.11
[ 3.992000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[ 4.000000] Clocksource tsc unstable (delta = -242104371 ns)
[ 4.148000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) ->
IRQ 21
[ 4.148000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 4.148000] scsi0 : ata_piix
[ 4.148000] scsi1 : ata_piix
[ 4.148000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x000118b0 irq 14
[ 4.148000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma
0x000118b8 irq 15
[ 4.352000] ata1.00: ATA-7: WDC WD1600BEVS-22RST0, 04.01G04, max UDMA/133
[ 4.352000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 4.368000] ata1.00: configured for UDMA/133
[ 4.688000] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-T10N, PP02, max UDMA/33
[ 4.860000] ata2.00: configured for UDMA/33
[ 4.860000] scsi 0:0:0:0: Direct-Access ATA WDC WD1600BEVS-2 04.0
PQ: 0 ANSI: 5
[ 4.864000] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-T10N PP02
PQ: 0 ANSI: 5
[ 4.864000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) ->
IRQ 20
[ 4.864000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 4.864000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 4.864000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 4.864000] ehci_hcd 0000:00:1d.7: debug port 1
[ 4.864000] PCI: cache line size of 32 is not supported by device
0000:00:1d.7
[ 4.864000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xd0644000
[ 4.868000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec
2004
[ 4.868000] usb usb5: configuration #1 chosen from 1 choice
[ 4.868000] hub 5-0:1.0: USB hub found
[ 4.868000] hub 5-0:1.0: 8 ports detected
[ 4.876000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.876000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.876000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.876000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.876000] sd 0:0:0:0: [sda] 312581808 512-byte hardware sectors (160042 MB)
[ 4.876000] sd 0:0:0:0: [sda] Write Protect is off
[ 4.876000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 4.876000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 4.876000] sda: sda1 sda2 sda3 sda4 < sda5 >
[ 4.956000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 4.964000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 4.964000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 4.976000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda
tray
[ 4.976000] Uniform CD-ROM driver Revision: 3.20
[ 4.976000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 5.276000] Attempting manual resume
[ 5.276000] swsusp: Resume From Partition 8:5
[ 5.276000] PM: Checking swsusp image.
[ 5.276000] PM: Resume from disk failed.
[ 5.320000] kjournald starting. Commit interval 5 seconds
[ 5.320000] EXT3-fs: mounted filesystem with ordered data mode.
[ 15.552000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.552000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.824000] Linux agpgart interface v0.102 (c) Dave Jones
[ 15.904000] Yenta: CardBus bridge found at 0000:0a:09.0 [1025:0110]
[ 15.904000] Yenta: Using CSCINT to route CSC interrupts to PCI
[ 15.904000] Yenta: Routing CardBus interrupts to PCI
[ 15.904000] Yenta TI: socket 0000:0a:09.0, mfunc 0x01321b22, devctl 0x66
[ 15.920000] iTCO_vendor_support: vendor-support=0
[ 15.932000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007)
[ 15.932000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[ 15.932000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 16.136000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 19
[ 16.136000] Socket status: 30000006
[ 16.136000] Yenta: Raising subordinate bus# of parent bus (#0a) from #0b to
#0e
[ 16.136000] pcmcia: parent PCI bridge I/O window: 0x3000 - 0x3fff
[ 16.136000] cs: IO port probe 0x3000-0x3fff: clean.
[ 16.136000] pcmcia: parent PCI bridge Memory window: 0xd0200000 - 0xd02fffff
[ 16.136000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[ 16.136000] agpgart: Detected an Intel 945GM Chipset.
[ 16.136000] agpgart: Detected 7932K stolen memory.
[ 16.160000] agpgart: AGP aperture is 256M @ 0xc0000000
[ 16.160000] ACPI: PCI Interrupt 0000:0a:09.2[A] -> GSI 20 (level, low) ->
IRQ 19
[ 16.180000] intel_rng: FWH not detected
[ 16.200000] PCI: Enabling device 0000:02:00.0 (0000 -> 0003)
[ 16.200000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 16.200000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 16.200000] sky2 0000:02:00.0: v1.14 addr 0x54000000 irq 16 Yukon-FE (0xb7)
rev 1
[ 16.200000] sky2 eth0: addr 00:1b:24:16:52:04
[ 16.480000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) ->
IRQ 22
[ 16.480000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 16.536000] cs: IO port probe 0x100-0x3af: clean.
[ 16.540000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7
[ 16.540000] cs: IO port probe 0x820-0x8ff: clean.
[ 16.540000] cs: IO port probe 0xc00-0xcf7: clean.
[ 16.540000] cs: IO port probe 0xa00-0xaff: clean.
[ 16.752000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x1280b1, caps:
0xa04713/0x204000
[ 16.808000] input: SynPS/2 Synaptics TouchPad as /class/input/input2
[ 17.412000] si3054: cannot initialize. EXT MID = 0000
[ 17.572000] fuse init (API version 7.8)
[ 17.660000] lp: driver loaded but no devices found
[ 17.696000] ndiswrapper version 1.45 loaded (smp=yes)
[ 17.764000] ndiswrapper: driver net5211 (,11/15/2006,5.1.1.9) loaded
[ 17.764000] PCI: Enabling device 0000:03:00.0 (0000 -> 0002)
[ 17.764000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) ->
IRQ 17
[ 17.764000] ndiswrapper (ZwClose:2247): closing handle 0xf7ee4128 not
implemented
[ 17.764000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 18.176000] ndiswrapper: using IRQ 17
[ 18.400000] wlan0: ethernet device 00:19:7e:3d:28:cd using serialized NDIS
driver: net5211, version: 0x50001, NDIS version: 0x501, vendor: 'NDIS Network
Adapter', 168C:001C.5.conf
[ 18.404000] wlan0: encryption modes supported: WEP; TKIP with WPA, WPA2,
WPA2PSK; AES/CCMP with WPA, WPA2, WPA2PSK
[ 18.404000] usbcore: registered new interface driver ndiswrapper
[ 18.600000] Adding 3004112k swap on /dev/sda5. Priority:-1 extents:1
across:3004112k
[ 18.912000] EXT3 FS on sda3, internal journal
[ 19.584000] ACPI: Battery Slot [BAT1] (battery present)
[ 19.664000] NET: Registered protocol family 17
[ 19.808000] ACPI: ACPI Dock Station Driver
[ 19.836000] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 19.844000] input: Power Button (FF) as /class/input/input3
[ 19.844000] ACPI: Power Button (FF) [PWRF]
[ 19.844000] input: Lid Switch as /class/input/input4
[ 19.844000] ACPI: Lid Switch [LID]
[ 19.844000] input: Power Button (CM) as /class/input/input5
[ 19.844000] ACPI: Power Button (CM) [PWRB]
[ 19.844000] input: Sleep Button (CM) as /class/input/input6
[ 19.844000] ACPI: Sleep Button (CM) [SLPB]
[ 19.956000] ACPI: AC Adapter [ACAD] (off-line)
[ 22.276000] sky2 eth0: enabling interface
[ 22.280000] sky2 eth0: ram buffer 4K
[ 23.528000] [drm] Initialized drm 1.1.0 20060810
[ 23.532000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) ->
IRQ 16
[ 23.532000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 24.004000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 24.192000] ppdev: user-space parallel port driver
[ 24.832000] apm: BIOS not found.
[ 25.584000] Bluetooth: Core ver 2.11
[ 25.584000] NET: Registered protocol family 31
[ 25.584000] Bluetooth: HCI device and connection manager initialized
[ 25.584000] Bluetooth: HCI socket layer initialized
[ 25.620000] Bluetooth: L2CAP ver 2.8
[ 25.620000] Bluetooth: L2CAP socket layer initialized
[ 25.808000] Bluetooth: RFCOMM socket layer initialized
[ 25.808000] Bluetooth: RFCOMM TTY layer initialized
[ 25.808000] Bluetooth: RFCOMM ver 1.8
[ 33.800000] NET: Registered protocol family 10
[ 33.800000] lo: Disabled Privacy Extensions
[ 33.800000] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 43.848000] eth0: no IPv6 routers present
[ 381.280000] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on
isa0060/serio0).
[ 381.280000] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
[ 381.672000] atkbd.c: Unknown key released (translated set 2, code 0xd5 on
isa0060/serio0).
[ 381.672000] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
[ 384.904000] atkbd.c: Unknown key pressed (translated set 2, code 0xd6 on
isa0060/serio0).
[ 384.904000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[ 385.404000] atkbd.c: Unknown key released (translated set 2, code 0xd6 on
isa0060/serio0).
[ 385.404000] atkbd.c: Use 'setkeycodes e056 <keycode>' to make it known.
[ 389.240000] atkbd.c: Unknown key pressed (translated set 2, code 0xd5 on
isa0060/serio0).
[ 389.240000] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
[ 390.288000] atkbd.c: Unknown key released (translated set 2, code 0xd5 on
isa0060/serio0).
[ 390.288000] atkbd.c: Use 'setkeycodes e055 <keycode>' to make it known.
[ 393.096000] atkbd.c: Unknown key pressed (translated set 2, code 0xd8 on
isa0060/serio0).
[ 393.096000] atkbd.c: Use 'setkeycodes e058 <keycode>' to make it known.
[ 393.496000] atkbd.c: Unknown key released (translated set 2, code 0xd8 on
isa0060/serio0).
[ 393.496000] atkbd.c: Use 'setkeycodes e058 <keycode>' to make it known.
[13412.096000] atkbd.c: Unknown key pressed (translated set 2, code 0xb3 on
isa0060/serio0).
[13412.096000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[13412.288000] atkbd.c: Unknown key released (translated set 2, code 0xb3 on
isa0060/serio0).
[13412.288000] atkbd.c: Use 'setkeycodes e033 <keycode>' to make it known.
[EMAIL PROTECTED]:~$ lsmod
Module Size Used by
ipv6 274020 10
binfmt_misc 12936 1
rfcomm 42136 0
l2cap 26240 9 rfcomm
bluetooth 57060 4 rfcomm,l2cap
ppdev 10244 0
i915 25728 2
drm 83348 3 i915
acpi_cpufreq 10568 1
cpufreq_stats 7232 0
cpufreq_powersave 2688 0
cpufreq_conservative 8072 0
cpufreq_userspace 5280 0
cpufreq_ondemand 9612 1
freq_table 5792 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand
ac 6148 0
container 5504 0
button 8976 0
video 17928 0
sbs 19592 0
dock 10656 0
af_packet 24840 6
battery 11012 0
ndiswrapper 185240 0
parport_pc 37412 0
lp 12580 0
parport 37448 3 ppdev,parport_pc,lp
fuse 47124 0
joydev 11328 0
snd_hda_intel 263712 1
snd_pcm_oss 44672 0
snd_mixer_oss 17664 1 snd_pcm_oss
snd_pcm 80388 2 snd_hda_intel,snd_pcm_oss
snd_seq_dummy 4740 0
snd_seq_oss 33152 0
snd_seq_midi 9600 0
snd_rawmidi 25728 1 snd_seq_midi
snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
pcmcia 41388 0
snd_seq 53232 6
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
snd_timer 24324 2 snd_pcm,snd_seq
sky2 45316 0
snd_seq_device 9228 5
snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
intel_agp 25620 1
snd 54660 11
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
tifm_7xx1 8832 0
tifm_core 11652 1 tifm_7xx1
soundcore 8800 1 snd
serio_raw 8068 0
psmouse 39952 0
iTCO_wdt 11940 0
iTCO_vendor_support 4868 1 iTCO_wdt
yenta_socket 27532 1
rsrc_nonstatic 14080 1 yenta_socket
pcmcia_core 40980 3 pcmcia,yenta_socket,rsrc_nonstatic
snd_page_alloc 10888 2 snd_hda_intel,snd_pcm
agpgart 35016 3 drm,intel_agp
shpchp 34580 0
pci_hotplug 32704 1 shpchp
evdev 11136 6
ext3 133768 1
jbd 60456 1 ext3
mbcache 9732 1 ext3
sg 36764 0
sr_mod 17828 0
sd_mod 30336 3
cdrom 37536 1 sr_mod
ata_generic 8452 0
ehci_hcd 36108 0
ata_piix 15876 2
libata 124528 2 ata_generic,ata_piix
scsi_mod 147084 4 sg,sr_mod,sd_mod,libata
uhci_hcd 26640 0
usbcore 138248 4 ndiswrapper,ehci_hcd,uhci_hcd
thermal 14344 0
processor 31944 2 acpi_cpufreq,thermal
fan 5764 0
capability 5896 0
commoncap 8320 1 capability
--
gutsy: wireless non-functional after update
https://bugs.launchpad.net/bugs/141394
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.
--
ubuntu-bugs mailing list
[email protected]
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
