Public bug reported: I'm using a Thinkpad T42 with atheros wireless hardware.
Up til a recent development update, wireless worked just fine. (WPA2 Personal, connecting to Linksys WRT54G, details stored in gnome-keyring) After login, gnome desktop popped up gnome-keyring, password entered and then the orbiting balls on the menubar went green and everything was lovely. Ever since a recent upgrade earlier this week, however, no keyring prompt appears,and the nm-applet 0.6.5 on the menubar no longer shows the wireless network name. Selecting "Manual configuration" in this applet brings up a "Wireless connection" entry, correctly identified with my essid wireless network name, I entered the network password, as previously, selected WPA2 Personal as previously, selected dhcp, clicked OK, watched the activity seesaw for about 10s, then tried a "host" command at the command line. Response timed out. WRT54G.) Unticked and re-ticked the enable for wireless, and wired interfaces, in the network applet while watching /var/log/messages with tail -f . Sensible messages with wired interface, nothing at all for wireless interface. Confirmed HW ok - rebooted the laptop to Windows XP, connected as normal to the wireless network. My kernel version and modules loaded are: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [EMAIL PROTECTED]:/home/simon# uname -a Linux odyssius 2.6.22-11-generic #1 SMP Mon Sep 17 03:45:58 GMT 2007 i686 GNU/Linux [EMAIL PROTECTED]:/home/simon# lsmod Module Size Used by radeon 125472 2 drm 83348 3 radeon rfcomm 42136 0 l2cap 26240 9 rfcomm bluetooth 57060 4 rfcomm,l2cap thinkpad_acpi 44332 0 ppdev 10244 0 acpi_cpufreq 10568 1 cpufreq_userspace 5280 0 cpufreq_conservative 8072 0 cpufreq_powersave 2688 0 cpufreq_stats 7232 0 cpufreq_ondemand 9612 1 freq_table 5792 3 acpi_cpufreq,cpufreq_stats,cpufreq_ondemand bay 6912 0 video 17928 0 button 8976 0 sbs 19592 0 container 5504 0 ac 6148 0 battery 11012 0 dock 10656 1 bay ext2 67208 1 ipv6 274020 8 lp 12580 0 irtty_sir 9856 0 joydev 11328 0 sir_dev 17412 1 irtty_sir nsc_ircc 24336 0 snd_intel8x0 34972 1 snd_ac97_codec 100644 1 snd_intel8x0 pcmcia 41388 0 wlan_scan_sta 15104 1 ath_rate_sample 14208 1 irda 202300 3 irtty_sir,sir_dev,nsc_ircc ac97_bus 3200 1 snd_ac97_codec snd_pcm_oss 44672 0 snd_mixer_oss 17664 1 snd_pcm_oss ath_pci 98336 0 snd_pcm 80388 3 snd_intel8x0,snd_ac97_codec,snd_pcm_oss snd_seq_dummy 4740 0 snd_seq_oss 33152 0 crc_ccitt 3072 1 irda wlan 206660 4 wlan_scan_sta,ath_rate_sample,ath_pci parport_pc 37412 1 parport 37448 3 ppdev,lp,parport_pc serio_raw 8068 0 ath_hal 192720 3 ath_rate_sample,ath_pci yenta_socket 27532 2 rsrc_nonstatic 14080 1 yenta_socket pcmcia_core 40980 3 pcmcia,yenta_socket,rsrc_nonstatic pcspkr 4224 0 snd_seq_midi 9600 0 snd_rawmidi 25728 1 snd_seq_midi psmouse 39952 0 af_packet 24840 8 snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi snd_seq 53232 6 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event snd_timer 24324 2 snd_pcm,snd_seq snd_seq_device 9228 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq iTCO_wdt 11940 0 iTCO_vendor_support 4868 1 iTCO_wdt snd 54660 12 snd_intel8x0,snd_ac97_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device soundcore 8800 1 snd snd_page_alloc 10888 2 snd_intel8x0,snd_pcm intel_agp 25620 1 agpgart 35016 2 drm,intel_agp shpchp 34580 0 pci_hotplug 32704 1 shpchp evdev 11136 5 ext3 133768 2 jbd 60456 1 ext3 mbcache 9732 2 ext2,ext3 sg 36764 0 sr_mod 17828 0 cdrom 37536 1 sr_mod sd_mod 30336 6 ata_generic 8452 0 e1000 126272 0 ata_piix 15876 5 libata 124528 2 ata_generic,ata_piix scsi_mod 147084 4 sg,sr_mod,sd_mod,libata ehci_hcd 36108 0 uhci_hcd 26640 0 usbcore 138248 3 ehci_hcd,uhci_hcd thermal 14344 0 processor 31944 2 acpi_cpufreq,thermal fan 5764 0 fuse 47124 3 apparmor 40600 0 commoncap 8320 1 apparmor [EMAIL PROTECTED]:/home/simon# <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< My dmesg output is: >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> [EMAIL PROTECTED]:/home/simon# dmesg [ 0.000000] Linux version 2.6.22-11-generic ([EMAIL PROTECTED]) (gcc version 4.1.3 20070831 (prerelease) (Ubuntu 4.1.2-16ubuntu1)) #1 SMP Mon Sep 17 03:45:58 GMT 2007 (Ubuntu 2.6.22-11.33-generic) [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000d2000 - 00000000000d4000 (reserved) [ 0.000000] BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000001ff60000 (usable) [ 0.000000] BIOS-e820: 000000001ff60000 - 000000001ff77000 (ACPI data) [ 0.000000] BIOS-e820: 000000001ff77000 - 000000001ff79000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000001ff80000 - 0000000020000000 (reserved) [ 0.000000] BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved) [ 0.000000] 0MB HIGHMEM available. [ 0.000000] 511MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 130912) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 130912 [ 0.000000] HighMem 130912 -> 130912 [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 130912 [ 0.000000] On node 0 totalpages: 130912 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 990 pages used for memmap [ 0.000000] Normal zone: 125826 pages, LIFO batch:31 [ 0.000000] HighMem zone: 0 pages used for memmap [ 0.000000] DMI present. [ 0.000000] ACPI: RSDP 000F6D70, 0024 (r2 IBM ) [ 0.000000] ACPI: XSDT 1FF6A6BD, 004C (r1 IBM TP-1R 3210 LTP 0) [ 0.000000] ACPI: FACP 1FF6A800, 00F4 (r3 IBM TP-1R 3210 IBM 1) [ 0.000000] ACPI Warning (tbfadt-0442): Optional field "Gpe1Block" has zero address or length: 000000000000102C/0 [20070126] [ 0.000000] ACPI: DSDT 1FF6A9E7, C4E5 (r1 IBM TP-1R 3210 MSFT 100000E) [ 0.000000] ACPI: FACS 1FF78000, 0040 [ 0.000000] ACPI: SSDT 1FF6A9B4, 0033 (r1 IBM TP-1R 3210 MSFT 100000E) [ 0.000000] ACPI: ECDT 1FF76ECC, 0052 (r1 IBM TP-1R 3210 IBM 1) [ 0.000000] ACPI: TCPA 1FF76F1E, 0032 (r1 IBM TP-1R 3210 PTL 1) [ 0.000000] ACPI: BOOT 1FF76FD8, 0028 (r1 IBM TP-1R 3210 LTP 1) [ 0.000000] ACPI: PM-Timer IO Port: 0x1008 [ 0.000000] Allocating PCI resources starting at 30000000 (gap: 20000000:df800000) [ 0.000000] Built 1 zonelists. Total pages: 129890 [ 0.000000] Kernel command line: root=UUID=23bdd422-46b8-424e-8e71-948ffe6215a9 ro quiet splash [ 0.000000] Local APIC disabled by BIOS -- you can enable it with "lapic" [ 0.000000] mapped APIC to ffffd000 (0140c000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 2048 (order: 11, 8192 bytes) [ 0.000000] Detected 1698.566 MHz processor. [ 13.245751] Console: colour VGA+ 80x25 [ 13.246027] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes) [ 13.246310] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes) [ 13.261489] Memory: 507660k/523648k available (2017k kernel code, 15440k reserved, 918k data, 364k init, 0k highmem) [ 13.261500] virtual kernel memory layout: [ 13.261501] fixmap : 0xfff4d000 - 0xfffff000 ( 712 kB) [ 13.261502] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 13.261503] vmalloc : 0xe0800000 - 0xff7fe000 ( 495 MB) [ 13.261505] lowmem : 0xc0000000 - 0xdff60000 ( 511 MB) [ 13.261506] .init : 0xc03e3000 - 0xc043e000 ( 364 kB) [ 13.261507] .data : 0xc02f8436 - 0xc03ddea4 ( 918 kB) [ 13.261509] .text : 0xc0100000 - 0xc02f8436 (2017 kB) [ 13.261512] Checking if this processor honours the WP bit even in supervisor mode... Ok. [ 13.261552] SLUB: Genslabs=22, HWalign=64, Order=0-1, MinObjects=4, CPUs=1, Nodes=1 [ 13.341462] Calibrating delay using timer specific routine.. 3399.52 BogoMIPS (lpj=6799042) [ 13.341490] Security Framework v1.0.0 initialized [ 13.341498] SELinux: Disabled at boot. [ 13.341512] Mount-cache hash table entries: 512 [ 13.341641] CPU: After generic identify, caps: afe9f9bf 00000000 00000000 00000000 00000180 00000000 00000000 [ 13.341653] CPU: L1 I cache: 32K, L1 D cache: 32K [ 13.341655] CPU: L2 cache: 2048K [ 13.341658] CPU: After all inits, caps: afe9f9bf 00000000 00000000 00002040 00000180 00000000 00000000 [ 13.341668] Compat vDSO mapped to ffffe000. [ 13.341679] Checking 'hlt' instruction... OK. [ 13.357544] SMP alternatives: switching to UP code [ 13.357739] Freeing SMP alternatives: 11k freed [ 13.357996] Early unpacking initramfs... done [ 13.700065] ACPI: Core revision 20070126 [ 13.700176] ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. [ 13.704331] ACPI: setting ELCR to 0200 (from 0800) [ 13.714499] CPU0: Intel(R) Pentium(R) M processor 1.70GHz stepping 06 [ 13.714504] SMP motherboard not detected. [ 13.714507] Local APIC not detected. Using dummy APIC emulation. [ 13.714545] Brought up 1 CPUs [ 13.714656] Booting paravirtualized kernel on bare hardware [ 13.714710] Time: 23:46:42 Date: 08/20/107 [ 13.714732] NET: Registered protocol family 16 [ 13.714809] EISA bus registered [ 13.714820] ACPI: bus type pci registered [ 13.714966] PCI: PCI BIOS revision 2.10 entry at 0xfd8d6, last bus=8 [ 13.714969] PCI: Using configuration type 1 [ 13.714970] Setting up standard PCI resources [ 13.718549] ACPI: EC: Found ECDT [ 13.726462] ACPI: Interpreter enabled [ 13.726465] ACPI: (supports S0 S3 S4 S5) [ 13.726481] ACPI: Using PIC for interrupt routing [ 13.733012] ACPI: EC: GPE=0x1c, ports=0x66, 0x62 [ 13.733053] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 13.733059] PCI: Probing PCI hardware (bus 00) [ 13.733414] PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO [ 13.733418] PCI quirk: region 1180-11bf claimed by ICH4 GPIO [ 13.733876] PCI: Transparent bridge - 0000:00:1e.0 [ 13.733987] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 13.734040] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT] [ 13.734063] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCI1._PRT] [ 13.737517] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11) [ 13.737704] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11) [ 13.737888] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 *11) [ 13.738071] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11) [ 13.738240] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 13.738409] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 13.738577] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled. [ 13.738761] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11) [ 13.739025] ACPI: Power Resource [PUBS] (on) [ 13.739037] Linux Plug and Play Support v0.97 (c) Adam Belay [ 13.739044] pnp: PnP ACPI init [ 13.739051] ACPI: bus type pnp registered [ 13.742374] pnp: PnP ACPI: found 12 devices [ 13.742376] ACPI: ACPI bus type pnp unregistered [ 13.742380] PnPBIOS: Disabled by ACPI PNP [ 13.742418] PCI: Using ACPI for IRQ routing [ 13.742421] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report [ 13.753312] NET: Registered protocol family 8 [ 13.753314] NET: Registered protocol family 20 [ 13.753359] pnp: 00:00: iomem range 0x0-0x9ffff could not be reserved [ 13.753362] pnp: 00:00: iomem range 0xc0000-0xc3fff could not be reserved [ 13.753365] pnp: 00:00: iomem range 0xc4000-0xc7fff could not be reserved [ 13.753368] pnp: 00:00: iomem range 0xc8000-0xcbfff could not be reserved [ 13.756889] Time: tsc clocksource has been installed. [ 13.783591] PCI: Bridge: 0000:00:01.0 [ 13.783594] IO window: 3000-3fff [ 13.783597] MEM window: c0100000-c01fffff [ 13.783601] PREFETCH window: e0000000-e7ffffff [ 13.783608] PCI: Bus 3, cardbus bridge: 0000:02:00.0 [ 13.783610] IO window: 00004000-000040ff [ 13.783614] IO window: 00004400-000044ff [ 13.783618] PREFETCH window: e8000000-ebffffff [ 13.783622] MEM window: c4000000-c7ffffff [ 13.783626] PCI: Bus 7, cardbus bridge: 0000:02:00.1 [ 13.783628] IO window: 00004800-000048ff [ 13.783632] IO window: 00004c00-00004cff [ 13.783636] PREFETCH window: ec000000-efffffff [ 13.783640] MEM window: c8000000-cbffffff [ 13.783644] PCI: Bridge: 0000:00:1e.0 [ 13.783647] IO window: 4000-8fff [ 13.783652] MEM window: c0200000-cfffffff [ 13.783656] PREFETCH window: e8000000-efffffff [ 13.783670] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 13.784007] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 [ 13.784010] PCI: setting IRQ 11 as level-triggered [ 13.784014] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 13.784340] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11 [ 13.784342] ACPI: PCI Interrupt 0000:02:00.1[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 13.784357] NET: Registered protocol family 2 [ 13.820829] IP route cache hash table entries: 4096 (order: 2, 16384 bytes) [ 13.820863] TCP established hash table entries: 16384 (order: 5, 196608 bytes) [ 13.821023] TCP bind hash table entries: 16384 (order: 5, 131072 bytes) [ 13.821131] TCP: Hash tables configured (established 16384 bind 16384) [ 13.821134] TCP reno registered [ 13.832893] checking if image is initramfs... it is [ 14.284188] Switched to high resolution mode on CPU 0 [ 14.506900] Freeing initrd memory: 7065k freed [ 14.507072] Simple Boot Flag at 0x35 set to 0x1 [ 14.507296] audit: initializing netlink socket (disabled) [ 14.507314] audit(1190332001.992:1): initialized [ 14.509177] VFS: Disk quotas dquot_6.5.1 [ 14.509223] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 14.509318] io scheduler noop registered [ 14.509320] io scheduler anticipatory registered [ 14.509322] io scheduler deadline registered [ 14.509340] io scheduler cfq registered (default) [ 14.509412] Boot video device is 0000:01:00.0 [ 14.509604] isapnp: Scanning for PnP cards... [ 14.862081] isapnp: No Plug & Play device found [ 14.886715] Real Time Clock Driver v1.12ac [ 14.886836] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled [ 14.887908] pnp: Device 00:09 activated. [ 14.888056] 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a NS16550A [ 14.888265] ACPI: PCI Interrupt 0000:00:1f.6[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 14.888275] ACPI: PCI interrupt for device 0000:00:1f.6 disabled [ 14.888796] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize [ 14.888999] input: Macintosh mouse button emulation as /class/input/input0 [ 14.889079] PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12 [ 14.900631] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 14.900635] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 14.900781] mice: PS/2 mouse device common for all mice [ 14.900874] EISA: Probing bus 0 at eisa.0 [ 14.900881] Cannot allocate resource for EISA slot 1 [ 14.900884] Cannot allocate resource for EISA slot 2 [ 14.900886] Cannot allocate resource for EISA slot 3 [ 14.900889] Cannot allocate resource for EISA slot 4 [ 14.900891] Cannot allocate resource for EISA slot 5 [ 14.900893] Cannot allocate resource for EISA slot 6 [ 14.900895] Cannot allocate resource for EISA slot 7 [ 14.900898] Cannot allocate resource for EISA slot 8 [ 14.900900] EISA: Detected 0 cards. [ 14.901000] TCP cubic registered [ 14.901016] NET: Registered protocol family 1 [ 14.901041] Using IPI No-Shortcut mode [ 14.901203] Magic number: 7:199:808 [ 14.901302] hash matches device ptys2 [ 14.901604] Freeing unused kernel memory: 364k freed [ 14.935218] input: AT Translated Set 2 keyboard as /class/input/input1 [ 16.070777] AppArmor: AppArmor initialized<5>audit(1190332003.492:2): info="AppArmor initialized" pid=1191 [ 16.075880] fuse init (API version 7.8) [ 16.079456] Failure registering capabilities with primary security module. [ 16.091823] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 16.091828] ACPI: Processor [CPU] (supports 8 throttling states) [ 16.093329] ACPI: Thermal Zone [THM0] (54 C) [ 16.427561] usbcore: registered new interface driver usbfs [ 16.427592] usbcore: registered new interface driver hub [ 16.427611] usbcore: registered new device driver usb [ 16.428376] USB Universal Host Controller Interface driver v3.0 [ 16.428452] ACPI: PCI Interrupt 0000:00:1d.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 16.428464] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 16.428468] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 16.428701] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 16.428725] uhci_hcd 0000:00:1d.0: irq 11, io base 0x00001800 [ 16.428830] usb usb1: configuration #1 chosen from 1 choice [ 16.428853] hub 1-0:1.0: USB hub found [ 16.428858] hub 1-0:1.0: 2 ports detected [ 16.535673] SCSI subsystem initialized [ 16.540708] libata version 2.21 loaded. [ 16.561266] ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 11 [ 16.561271] ACPI: PCI Interrupt 0000:00:1d.1[B] -> Link [LNKD] -> GSI 11 (level, low) -> IRQ 11 [ 16.561283] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 16.561286] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 16.561311] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 16.561334] uhci_hcd 0000:00:1d.1: irq 11, io base 0x00001820 [ 16.561434] usb usb2: configuration #1 chosen from 1 choice [ 16.561463] hub 2-0:1.0: USB hub found [ 16.561469] hub 2-0:1.0: 2 ports detected [ 16.629260] Intel(R) PRO/1000 Network Driver - version 7.3.20-k2-NAPI [ 16.629264] Copyright (c) 1999-2006 Intel Corporation. [ 16.665115] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 [ 16.665120] ACPI: PCI Interrupt 0000:00:1d.2[C] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 16.665132] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 16.665136] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 16.665164] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 16.665187] uhci_hcd 0000:00:1d.2: irq 11, io base 0x00001840 [ 16.665280] usb usb3: configuration #1 chosen from 1 choice [ 16.665305] hub 3-0:1.0: USB hub found [ 16.665311] hub 3-0:1.0: 2 ports detected [ 3.456000] Marking TSC unstable due to: possible TSC halt in C2. [ 3.464000] Time: acpi_pm clocksource has been installed. [ 3.508000] ACPI: PCI Interrupt Link [LNKH] enabled at IRQ 11 [ 3.508000] ACPI: PCI Interrupt 0000:00:1d.7[D] -> Link [LNKH] -> GSI 11 (level, low) -> IRQ 11 [ 3.508000] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 3.508000] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 3.508000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 4 [ 3.508000] ehci_hcd 0000:00:1d.7: debug port 1 [ 3.508000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 3.508000] ehci_hcd 0000:00:1d.7: irq 11, io mem 0xc0000000 [ 3.512000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 3.512000] usb usb4: configuration #1 chosen from 1 choice [ 3.512000] hub 4-0:1.0: USB hub found [ 3.512000] hub 4-0:1.0: 6 ports detected [ 3.616000] ata_piix 0000:00:1f.1: version 2.11 [ 3.616000] PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) [ 3.616000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 3.616000] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 3.616000] scsi0 : ata_piix [ 3.616000] scsi1 : ata_piix [ 3.616000] ata1: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x00011860 irq 14 [ 3.616000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x00011868 irq 15 [ 3.780000] ata1.00: ATA-6: HTS424040M9AT00, MA2IA70A, max UDMA/100 [ 3.780000] ata1.00: 78140160 sectors, multi 16: LBA [ 3.796000] ata1.00: configured for UDMA/100 [ 4.116000] ata2.00: ATAPI: HL-DT-STDVD-ROM GDR8083N, 0K04, max UDMA/33 [ 4.288000] ata2.00: configured for UDMA/33 [ 4.288000] scsi 0:0:0:0: Direct-Access ATA HTS424040M9AT00 MA2I PQ: 0 ANSI: 5 [ 4.292000] scsi 1:0:0:0: CD-ROM HL-DT-ST DVD-ROM GDR8083N 0K04 PQ: 0 ANSI: 5 [ 4.296000] ACPI: PCI Interrupt 0000:02:01.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 4.304000] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 4.304000] sd 0:0:0:0: [sda] Write Protect is off [ 4.304000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.304000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.304000] sd 0:0:0:0: [sda] 78140160 512-byte hardware sectors (40008 MB) [ 4.304000] sd 0:0:0:0: [sda] Write Protect is off [ 4.304000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 4.304000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 4.304000] sda: sda1 sda2 sda3 sda4 <<6>e1000: 0000:02:01.0: e1000_probe: (PCI:33MHz:32-bit) 00:11:25:84:20:05 [ 4.548000] sda5<6>e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection [ 4.588000] sda6 sda7 > [ 4.588000] sd 0:0:0:0: [sda] Attached SCSI disk [ 4.608000] sr0: scsi3-mmc drive: 10x/24x cd/rw xa/form2 cdda tray [ 4.608000] Uniform CD-ROM driver Revision: 3.20 [ 4.608000] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 4.612000] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 4.612000] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 5.200000] Attempting manual resume [ 5.200000] swsusp: Resume From Partition 8:7 [ 5.200000] PM: Checking swsusp image. [ 5.200000] PM: Resume from disk failed. [ 5.236000] kjournald starting. Commit interval 5 seconds [ 5.236000] EXT3-fs: mounted filesystem with ordered data mode. [ 20.524000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 21.724000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 21.784000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 [ 21.840000] Linux agpgart interface v0.102 (c) Dave Jones [ 21.844000] agpgart: Detected an Intel 855PM Chipset. [ 21.860000] agpgart: AGP aperture is 256M @ 0xd0000000 [ 21.884000] intel_rng: FWH not detected [ 22.008000] iTCO_vendor_support: vendor-support=0 [ 22.008000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (21-Jan-2007) [ 22.008000] iTCO_wdt: Found a ICH4-M TCO device (Version=1, TCOBASE=0x1060) [ 22.008000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0) [ 22.196000] NET: Registered protocol family 17 [ 22.664000] input: PC Speaker as /class/input/input2 [ 22.764000] Yenta: CardBus bridge found at 0000:02:00.0 [1014:0552] [ 22.764000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 22.764000] Yenta: Routing CardBus interrupts to PCI [ 22.764000] Yenta TI: socket 0000:02:00.0, mfunc 0x01d21b22, devctl 0x64 [ 22.764000] ath_hal: module license 'Proprietary' taints kernel. [ 22.764000] ath_hal: 0.9.18.0 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) [ 22.996000] Yenta: ISA IRQ mask 0x04f8, PCI irq 11 [ 22.996000] Socket status: 30000086 [ 22.996000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 22.996000] cs: IO port probe 0x4000-0x8fff: clean. [ 22.996000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 22.996000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 22.996000] Yenta: CardBus bridge found at 0000:02:00.1 [1014:0552] [ 22.996000] Yenta: Using INTVAL to route CSC interrupts to PCI [ 22.996000] Yenta: Routing CardBus interrupts to PCI [ 22.996000] Yenta TI: socket 0000:02:00.1, mfunc 0x01d21b22, devctl 0x64 [ 23.028000] wlan: 0.8.4.2 (0.9.3.2) [ 23.228000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x2c6ab1, caps: 0x884793/0x0 [ 23.228000] serio: Synaptics pass-through port at isa0060/serio1/input0 [ 23.244000] Yenta: ISA IRQ mask 0x04f8, PCI irq 11 [ 23.244000] Socket status: 30000086 [ 23.244000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x8fff [ 23.244000] cs: IO port probe 0x4000-0x8fff: clean. [ 23.244000] pcmcia: parent PCI bridge Memory window: 0xc0200000 - 0xcfffffff [ 23.244000] pcmcia: parent PCI bridge Memory window: 0xe8000000 - 0xefffffff [ 23.276000] input: SynPS/2 Synaptics TouchPad as /class/input/input3 [ 23.280000] parport_pc 00:0a: reported by Plug and Play ACPI [ 23.280000] parport0: PC-style at 0x3bc, irq 7 [PCSPP,TRISTATE] [ 23.356000] ath_pci: 0.9.4.5 (0.9.3.2) [ 23.356000] ACPI: PCI Interrupt 0000:02:02.0[A] -> Link [LNKC] -> GSI 11 (level, low) -> IRQ 11 [ 23.920000] irda_init() [ 23.920000] NET: Registered protocol family 23 [ 23.984000] ath_rate_sample: 1.2 (0.9.3.2) [ 23.984000] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 23.984000] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 23.984000] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 23.984000] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 23.984000] wifi0: mac 5.9 phy 4.3 radio 3.6 [ 23.984000] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 23.984000] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 23.984000] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 23.984000] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 23.984000] wifi0: Use hw queue 8 for CAB traffic [ 23.984000] wifi0: Use hw queue 9 for beacons [ 24.036000] wifi0: Atheros 5212: mem=0xc0210000, irq=11 [ 24.208000] ACPI: PCI Interrupt 0000:00:1f.5[B] -> Link [LNKB] -> GSI 11 (level, low) -> IRQ 11 [ 24.208000] PCI: Setting latency timer of device 0000:00:1f.5 to 64 [ 24.220000] pnp: Device 00:0b activated. [ 24.220000] nsc_ircc_pnp_probe() : From PnP, found firbase 0x2F8 ; irq 3 ; dma 1. [ 24.220000] nsc-ircc, chip->init [ 24.220000] nsc-ircc, Found chip at base=0x02e [ 24.220000] nsc-ircc, driver loaded (Dag Brattli) [ 24.220000] IrDA: Registered device irda0 [ 24.220000] nsc-ircc, Using dongle: IBM31T1100 or Temic TFDS6000/TFDS6500 [ 24.640000] cs: IO port probe 0x100-0x3af: clean. [ 24.644000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 24.644000] cs: IO port probe 0x820-0x8ff: clean. [ 24.644000] cs: IO port probe 0xc00-0xcf7: clean. [ 24.644000] cs: IO port probe 0xa00-0xaff: clean. [ 24.644000] cs: IO port probe 0x100-0x3af: clean. [ 24.644000] cs: IO port probe 0x3e0-0x4ff: excluding 0x4d0-0x4d7 [ 24.648000] cs: IO port probe 0x820-0x8ff: clean. [ 24.648000] cs: IO port probe 0xc00-0xcf7: clean. [ 24.648000] cs: IO port probe 0xa00-0xaff: clean. [ 25.016000] Clocksource tsc unstable (delta = -253151665 ns) [ 25.136000] intel8x0_measure_ac97_clock: measured 55475 usecs [ 25.136000] intel8x0: clocking to 48000 [ 25.320000] lp0: using parport0 (interrupt-driven). [ 25.428000] Adding 730884k swap on /dev/sda7. Priority:-1 extents:1 across:730884k [ 25.924000] EXT3 FS on sda5, internal journal [ 26.228000] NET: Registered protocol family 10 [ 26.228000] lo: Disabled Privacy Extensions [ 26.900000] kjournald starting. Commit interval 5 seconds [ 26.900000] EXT3 FS on sda6, internal journal [ 26.900000] EXT3-fs: mounted filesystem with ordered data mode. [ 28.844000] ACPI: ACPI Dock Station Driver [ 28.864000] ACPI: Battery Slot [BAT0] (battery present) [ 28.904000] ACPI: AC Adapter [AC] (on-line) [ 29.004000] input: Power Button (FF) as /class/input/input4 [ 29.008000] ACPI: Power Button (FF) [PWRF] [ 29.052000] input: Lid Switch as /class/input/input5 [ 29.056000] ACPI: Lid Switch [LID] [ 29.100000] input: Sleep Button (CM) as /class/input/input6 [ 29.100000] ACPI: Sleep Button (CM) [SLPB] [ 29.196000] ACPI: Video Device [VID] (multi-head: yes rom: no post: no) [ 29.204000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: found ejectable bay [ 29.204000] ACPI: \_SB_.PCI0.IDE0.SCND.MSTR: Adding notify handler [ 29.204000] ACPI: Error installing bay notify handler [ 29.204000] ACPI: Bay [\_SB_.PCI0.IDE0.SCND.MSTR] Added [ 29.332000] IBM TrackPoint firmware: 0x0e, buttons: 3/3 [ 29.568000] input: TPPS/2 IBM TrackPoint as /class/input/input7 [ 31.316000] ppdev: user-space parallel port driver [ 33.056000] audit(1190328434.715:3): operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=4747 profile="/usr/sbin/cupsd" [ 33.244000] IBM machine detected. Enabling interrupts during APM calls. [ 33.248000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac) [ 33.248000] apm: overridden by ACPI. [ 33.416000] thinkpad_acpi: ThinkPad ACPI Extras v0.14 [ 33.416000] thinkpad_acpi: http://ibm-acpi.sf.net/ [ 33.416000] thinkpad_acpi: ThinkPad EC firmware 1RHT71WW-3.04 [ 33.424000] thinkpad_acpi: another device driver is already handling bay events [ 33.424000] thinkpad_acpi: disabling subdriver bay [ 33.580000] Failure registering capabilities with primary security module. [ 33.876000] Bluetooth: Core ver 2.11 [ 33.876000] NET: Registered protocol family 31 [ 33.876000] Bluetooth: HCI device and connection manager initialized [ 33.876000] Bluetooth: HCI socket layer initialized [ 33.920000] Bluetooth: L2CAP ver 2.8 [ 33.920000] Bluetooth: L2CAP socket layer initialized [ 34.052000] Bluetooth: RFCOMM socket layer initialized [ 34.052000] Bluetooth: RFCOMM TTY layer initialized [ 34.052000] Bluetooth: RFCOMM ver 1.8 [ 35.948000] [drm] Initialized drm 1.1.0 20060810 [ 35.960000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 35.964000] [drm] Initialized radeon 1.27.0 20060524 on minor 0 [ 36.480000] eth0: no IPv6 routers present [ 36.580000] ath0: no IPv6 routers present [ 38.392000] agpgart: Found an AGP 2.0 compliant device at 0000:00:00.0. [ 38.392000] agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode [ 38.392000] agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode [ 39.712000] [drm] Setting GART location based on new memory map [ 39.712000] [drm] writeback test succeeded in 2 usecs [ 2596.304000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2597.856000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 2597.856000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2608.548000] eth0: no IPv6 routers present [ 2638.160000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2639.856000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 2639.856000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2645.500000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2647.208000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 2647.208000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2663.756000] eth0: no IPv6 routers present [ 2696.048000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2697.660000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 2697.660000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2707.712000] eth0: no IPv6 routers present [ 2721.112000] ath0: no IPv6 routers present [ 2773.912000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2775.628000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 2775.628000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2777.748000] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 2779.348000] e1000: eth0: e1000_watchdog: NIC Link is Up 100 Mbps Full Duplex, Flow Control: RX/TX [ 2779.348000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 2793.292000] eth0: no IPv6 routers present [EMAIL PROTECTED]:/home/simon# <<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<<< Any further info you need, please advise. ** Affects: ubuntu Importance: Undecided Status: New -- gutsy: wireless non-functional after update https://bugs.launchpad.net/bugs/141394 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
