** Description changed: screen saver locked up computer - forced to hard shutdown computer and turn back on. - - Version log: Ubuntu 3.19.0-12.12-generic 3.19.3 - - LSPCI: - 00:00.0 Host bridge [0600]: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller [8086:29c0] (rev 02) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ >SERR- <PERR- INTx- - Latency: 0 - Capabilities: [e0] Vendor Specific Information: Len=0b <?> - - 00:01.0 PCI bridge [0604]: Intel Corporation 82G33/G31/P35/P31 Express PCI Express Root Port [8086:29c1] (rev 02) (prog-if 00 [Normal decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 - I/O behind bridge: 0000c000-0000cfff - Memory behind bridge: fb000000-fcffffff - Prefetchable memory behind bridge: 00000000b0000000-00000000cfffffff - Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort+ <SERR- <PERR- - BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [88] Subsystem: Dell Inspiron 530 [1028:020d] - Capabilities: [80] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- - Address: fee0f00c Data: 41d1 - Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0 - ExtTag- RBE+ - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop- - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- - LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s, Exit Latency L0s <256ns, L1 <4us - ClockPM- Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug- Surprise- - Slot #0, PowerLimit 0.000W; Interlock- NoCompl+ - SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq- LinkChg- - Control: AttnInd Off, PwrInd On, Power- Interlock- - SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+ Interlock- - Changed: MRL- PresDet+ LinkState- - RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna- CRSVisible- - RootCap: CRSVisible- - RootSta: PME ReqID 0000, PMEStatus- PMEPending- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed- WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - Capabilities: [140 v1] Root Complex Link - Desc: PortNumber=02 ComponentID=01 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=01 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000fed19000 - Kernel driver in use: pcieport - - 00:19.0 Ethernet controller [0200]: Intel Corporation 82562V-2 10/100 Network Connection [8086:10c0] (rev 02) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 25 - Region 0: Memory at fdfc0000 (32-bit, non-prefetchable) [size=128K] - Region 1: Memory at fdfff000 (32-bit, non-prefetchable) [size=4K] - Region 2: I/O ports at ff00 [size=32] - Capabilities: [c8] Power Management version 2 - Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=1 PME- - Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+ - Address: 00000000fee0200c Data: 41d2 - Capabilities: [e0] Vendor Specific Information: Len=06 <?> - Kernel driver in use: e1000e - - 00:1a.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 [8086:2937] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 16 - Region 4: I/O ports at fe00 [size=32] - Capabilities: [50] Vendor Specific Information: Len=06 <?> - Kernel driver in use: uhci_hcd - - 00:1a.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 [8086:2938] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin B routed to IRQ 21 - Region 4: I/O ports at fd00 [size=32] - Capabilities: [50] Vendor Specific Information: Len=06 <?> - Kernel driver in use: uhci_hcd - - 00:1a.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 [8086:2939] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin D routed to IRQ 19 - Region 4: I/O ports at fc00 [size=32] - Capabilities: [50] Vendor Specific Information: Len=06 <?> - Kernel driver in use: uhci_hcd - - 00:1a.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 [8086:293c] (rev 02) (prog-if 20 [EHCI]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin C routed to IRQ 18 - Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=1K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Kernel driver in use: ehci-pci - - 00:1b.0 Audio device [0403]: Intel Corporation 82801I (ICH9 Family) HD Audio Controller [8086:293e] (rev 02) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 26 - Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [60] MSI: Enable+ Count=1/1 Maskable- 64bit+ - Address: 00000000fee0f00c Data: 4192 - Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00 - DevCap: MaxPayload 128 bytes, PhantFunc 0 - ExtTag- RBE- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+ - MaxPayload 128 bytes, MaxReadReq 128 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+ TransPend- - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed- WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - VC1: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=1 ArbSelect=Fixed TC/VC=80 - Status: NegoPending- InProgress- - Capabilities: [130 v1] Root Complex Link - Desc: PortNumber=0f ComponentID=02 EltType=Config - Link0: Desc: TargetPort=00 TargetComponent=02 AssocRCRB- LinkType=MemMapped LinkValid+ - Addr: 00000000fed1c000 - Kernel driver in use: snd_hda_intel - - 00:1d.0 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 [8086:2934] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 23 - Region 4: I/O ports at fb00 [size=32] - Capabilities: [50] Vendor Specific Information: Len=06 <?> - Kernel driver in use: uhci_hcd - - 00:1d.1 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 [8086:2935] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin B routed to IRQ 19 - Region 4: I/O ports at fa00 [size=32] - Capabilities: [50] Vendor Specific Information: Len=06 <?> - Kernel driver in use: uhci_hcd - - 00:1d.2 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 [8086:2936] (rev 02) (prog-if 00 [UHCI]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin C routed to IRQ 18 - Region 4: I/O ports at f900 [size=32] - Capabilities: [50] Vendor Specific Information: Len=06 <?> - Kernel driver in use: uhci_hcd - - 00:1d.7 USB controller [0c03]: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 [8086:293a] (rev 02) (prog-if 20 [EHCI]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 23 - Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=1K] - Capabilities: [50] Power Management version 2 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Kernel driver in use: ehci-pci - - 00:1e.0 PCI bridge [0604]: Intel Corporation 82801 PCI Bridge [8086:244e] (rev 92) (prog-if 01 [Subtractive decode]) - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Bus: primary=00, secondary=02, subordinate=02, sec-latency=32 - I/O behind bridge: 0000d000-0000dfff - Memory behind bridge: fde00000-fdefffff - Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff - Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ <SERR- <PERR- - BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B- - PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn- - Capabilities: [50] Subsystem: Dell Inspiron 530 [1028:020d] - - 00:1f.0 ISA bridge [0601]: Intel Corporation 82801IR (ICH9R) LPC Interface Controller [8086:2916] (rev 02) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Capabilities: [e0] Vendor Specific Information: Len=0c <?> - Kernel driver in use: lpc_ich - - 00:1f.2 IDE interface [0101]: Intel Corporation 82801IR/IO/IH (ICH9R/DO/DH) 4 port SATA Controller [IDE mode] [8086:2920] (rev 02) (prog-if 8f [Master SecP SecO PriP PriO]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 19 - Region 0: I/O ports at f800 [size=8] - Region 1: I/O ports at f700 [size=4] - Region 2: I/O ports at f600 [size=8] - Region 3: I/O ports at f500 [size=4] - Region 4: I/O ports at f400 [size=16] - Region 5: I/O ports at f300 [size=16] - Capabilities: [70] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [b0] Vendor Specific Information: Len=06 <?> - Kernel driver in use: ata_piix - - 00:1f.3 SMBus [0c05]: Intel Corporation 82801I (ICH9 Family) SMBus Controller [8086:2930] (rev 02) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Interrupt: pin B routed to IRQ 11 - Region 0: Memory at fdffc000 (64-bit, non-prefetchable) [size=256] - Region 4: I/O ports at 0500 [size=32] - - 00:1f.5 IDE interface [0101]: Intel Corporation 82801I (ICH9 Family) 2 port SATA Controller [IDE mode] [8086:2926] (rev 02) (prog-if 85 [Master SecO PriO]) - Subsystem: Dell Inspiron 530 [1028:020d] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0 - Interrupt: pin A routed to IRQ 19 - Region 0: I/O ports at f100 [size=8] - Region 1: I/O ports at f000 [size=4] - Region 2: I/O ports at ef00 [size=8] - Region 3: I/O ports at ee00 [size=4] - Region 4: I/O ports at ed00 [size=16] - Region 5: I/O ports at ec00 [size=16] - Capabilities: [70] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [b0] Vendor Specific Information: Len=06 <?> - Kernel driver in use: ata_piix - - 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation GK107 [GeForce GTX 650] [10de:0fc6] (rev a1) (prog-if 00 [VGA controller]) - Subsystem: eVga.com. Corp. Device [3842:2651] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin A routed to IRQ 27 - Region 0: Memory at fb000000 (32-bit, non-prefetchable) [size=16M] - Region 1: Memory at b0000000 (64-bit, prefetchable) [size=256M] - Region 3: Memory at ce000000 (64-bit, prefetchable) [size=32M] - Region 5: I/O ports at cf00 [size=128] - [virtual] Expansion ROM at fc000000 [disabled] [size=512K] - Capabilities: [60] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [68] MSI: Enable+ Count=1/1 Maskable- 64bit+ - Address: 00000000fee0f00c Data: 41b2 - Capabilities: [78] Express (v2) Endpoint, MSI 00 - DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us - ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ - MaxPayload 128 bytes, MaxReadReq 512 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- - LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us - ClockPM+ Surprise- LLActRep- BwNot- - LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported - DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled - LnkCtl2: Target Link Speed: 8GT/s, EnterCompliance- SpeedDis- - Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- - Compliance De-emphasis: -6dB - LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- - EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- - Capabilities: [b4] Vendor Specific Information: Len=14 <?> - Capabilities: [100 v1] Virtual Channel - Caps: LPEVC=0 RefClk=100ns PATEntryBits=1 - Arb: Fixed- WRR32- WRR64- WRR128- - Ctrl: ArbSelect=Fixed - Status: InProgress- - VC0: Caps: PATOffset=00 MaxTimeSlots=1 RejSnoopTrans- - Arb: Fixed- WRR32- WRR64- WRR128- TWRR128- WRR256- - Ctrl: Enable+ ID=0 ArbSelect=Fixed TC/VC=01 - Status: NegoPending- InProgress- - Capabilities: [128 v1] Power Budgeting <?> - Capabilities: [600 v1] Vendor Specific Information: ID=0001 Rev=1 Len=024 <?> - Capabilities: [900 v1] #19 - Kernel driver in use: nouveau - - 01:00.1 Audio device [0403]: NVIDIA Corporation GK107 HDMI Audio Controller [10de:0e1b] (rev a1) - Subsystem: eVga.com. Corp. Device [3842:2651] - Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 0, Cache Line Size: 64 bytes - Interrupt: pin B routed to IRQ 17 - Region 0: Memory at fcffc000 (32-bit, non-prefetchable) [size=16K] - Capabilities: [60] Power Management version 3 - Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) - Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- - Capabilities: [68] MSI: Enable- Count=1/1 Maskable- 64bit+ - Address: 0000000000000000 Data: 0000 - Capabilities: [78] Express (v2) Endpoint, MSI 00 - DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s unlimited, L1 <64us - ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- - DevCtl: Report errors: Correctable- Non-Fatal- Fatal- Unsupported- - RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ - MaxPayload 128 bytes, MaxReadReq 512 bytes - DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- - LnkCap: Port #0, Speed 8GT/s, Width x16, ASPM L0s L1, Exit Latency L0s <512ns, L1 <4us - ClockPM+ Surprise- LLActRep- BwNot- - LnkCtl: ASPM L0s L1 Enabled; RCB 64 bytes Disabled- CommClk+ - ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- - LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- - DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR-, OBFF Not Supported - DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled - LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- - EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- - Kernel driver in use: snd_hda_intel - - 02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8169 PCI Gigabit Ethernet Controller [10ec:8169] (rev 10) - Subsystem: Realtek Semiconductor Co., Ltd. RTL8169/8110 Family PCI Gigabit Ethernet NIC [10ec:8169] - Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- - Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- - Latency: 64 (8000ns min, 16000ns max), Cache Line Size: 32 bytes - Interrupt: pin A routed to IRQ 21 - Region 0: I/O ports at de00 [size=256] - Region 1: Memory at fdeff000 (32-bit, non-prefetchable) [size=256] - [virtual] Expansion ROM at fde00000 [disabled] [size=128K] - Capabilities: [dc] Power Management version 2 - Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA PME(D0-,D1+,D2+,D3hot+,D3cold+) - Status: D0 NoSoftRst- PME-Enable- DSel=0 DScale=0 PME- - Kernel driver in use: r8169 ProblemType: KernelOops DistroRelease: Ubuntu 15.04 Package: linux-image-3.19.0-12-generic 3.19.0-12.12 ProcVersionSignature: Ubuntu 3.19.0-12.12-generic 3.19.3 Uname: Linux 3.19.0-12-generic x86_64 Annotation: Your system might become unstablenow and might need to be restarted. ApportVersion: 2.17-0ubuntu1 Architecture: amd64 AudioDevicesInUse: - USER PID ACCESS COMMAND - /dev/snd/controlC1: chris 1431 F.... pulseaudio - /dev/snd/controlC0: chris 1431 F.... pulseaudio + USER PID ACCESS COMMAND + /dev/snd/controlC1: chris 1431 F.... pulseaudio + /dev/snd/controlC0: chris 1431 F.... pulseaudio Date: Tue Apr 7 19:18:50 2015 Failure: oops HibernationDevice: RESUME=UUID=6b93044d-8184-4d0e-a59d-be6f05e7ec45 InstallationDate: Installed on 2015-03-28 (10 days ago) InstallationMedia: Ubuntu-MATE 15.04 "Vivid Vervet" - Beta amd64 (20150326) IwConfig: - eth0 no wireless extensions. - - eth1 no wireless extensions. - - lo no wireless extensions. + eth0 no wireless extensions. + + eth1 no wireless extensions. + + lo no wireless extensions. MachineType: Dell Inc. Inspiron 530 ProcFB: 0 nouveaufb ProcKernelCmdLine: BOOT_IMAGE=/@/boot/vmlinuz-3.19.0-12-generic root=UUID=96efd830-9fa8-4f21-bafa-b076290da0b2 ro rootflags=subvol=@ quiet splash vt.handoff=7 PulseList: Error: command ['pacmd', 'list'] failed with exit code 1: No PulseAudio daemon running, or not running as session daemon. RelatedPackageVersions: kerneloops-daemon 0.12+git20090217-3ubuntu8 RfKill: - + SourcePackage: linux Title: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [kworker/1:1:5087] UdevLog: Error: [Errno 2] No such file or directory: '/var/log/udev' UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 02/24/2009 dmi.bios.vendor: Dell Inc. dmi.bios.version: 1.0.18 dmi.board.name: 0FM586 dmi.board.vendor: Dell Inc. dmi.chassis.type: 3 dmi.chassis.vendor: Dell Inc. dmi.chassis.version: OEM dmi.modalias: dmi:bvnDellInc.:bvr1.0.18:bd02/24/2009:svnDellInc.:pnInspiron530:pvr:rvnDellInc.:rn0FM586:rvr:cvnDellInc.:ct3:cvrOEM: dmi.product.name: Inspiron 530 dmi.sys.vendor: Dell Inc.
** Tags added: latest-bios-1.0.18 ** Tags added: kernel-bug-exists-upstream-4.0-rc7 -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1441387 Title: NMI watchdog: BUG: soft lockup - CPU#1 stuck for 23s! [kworker/1:1:5087] To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1441387/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
