I can confirm the regression: my card is 02:00.0 Network controller: Broadcom Corporation BCM4306 802.11b/g Wireless LAN Controller (rev 02) and I'm running the kernel 2.6.22-11-386 on Gutsy
I can confirm poor performance, I can reach only ~40KB traffic from a cople meters away from the AP. I cannot confirm the crash in restricted-manager, Infact i can download succesfully the firmware from the internet with restricted-manager (source http://xeve.de/down/wl_apsta.o) and the lights of my pcmcia card do light on, but restricted manager still ask for a firmware after a reboot, and I have to start over the process of enable firmware --> download the firmware from internet. I have filled a bug (Bug #139086) about this. Also I confirm a bug in restricted manager that prevents me from load a firmware using a local file either typing the path-to-file manually in the input box and trying to push the browse button. when launching restricted manager from a terminal and downloading the file from internet I receive this output from the terminal: filename : wl_apsta.o version : 3.130.20.0 MD5 : e08665c5c5b66beb9c3b2dd54aa80cb3 microcodes : 2 4 5 11 pcms : 4 5 microcode : 2 revision : 0x0127 patchlevel : 0x000e date : 2005-04-18 time : 02:36:27 microcode : 4 revision : 0x0127 patchlevel : 0x000e date : 2005-04-18 time : 02:36:27 microcode : 5 revision : 0x0127 patchlevel : 0x000e date : 2005-04-18 time : 02:36:27 microcode : 11 revision : 0x0127 patchlevel : 0x000e date : 2005-04-18 time : 02:36:27 Cannot open input file http://xeve.de/down/wl_apsta.o ===== this is DMESG output: [ 780.096000] ieee80211_crypt: registered algorithm 'NULL' [ 780.104000] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 780.104000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> [ 780.148000] bcm43xx driver [ 780.148000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) [ 780.148000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 780.148000] PCI: Setting latency timer of device 0000:02:00.0 to 64 [ 780.184000] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 780.184000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 [ 780.836000] ADDRCONF(NETDEV_UP): eth1: link is not ready [ 850.356000] ACPI: PCI interrupt for device 0000:02:00.0 disabled [ 850.356000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 [ 850.892000] ADDRCONF(NETDEV_UP): eth1: link is not ready ============= this is /var/log/messages Sep 13 14:06:21 ugo kernel: [ 780.104000] ieee80211: 802.11 data/management/control stack, git-1.1.13 Sep 13 14:06:21 ugo kernel: [ 780.104000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> Sep 13 14:06:21 ugo kernel: [ 780.148000] bcm43xx driver Sep 13 14:06:21 ugo kernel: [ 780.148000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) Sep 13 14:06:21 ugo kernel: [ 780.148000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Sep 13 14:06:21 ugo kernel: [ 780.184000] ACPI: PCI interrupt for device 0000:02:00.0 disabled Sep 13 14:06:21 ugo kernel: [ 780.184000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Sep 13 14:06:22 ugo kernel: [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 Sep 13 14:06:22 ugo last message repeated 7 times Sep 13 14:06:22 ugo kernel: [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 Sep 13 14:06:22 ugo last message repeated 3 times Sep 13 14:06:22 ugo kernel: [ 780.836000] ADDRCONF(NETDEV_UP): eth1: link is not ready Sep 13 14:07:32 ugo kernel: [ 850.356000] ACPI: PCI interrupt for device 0000:02:00.0 disabled Sep 13 14:07:32 ugo kernel: [ 850.356000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Sep 13 14:07:32 ugo kernel: [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 Sep 13 14:07:32 ugo last message repeated 7 times Sep 13 14:07:32 ugo kernel: [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 Sep 13 14:07:32 ugo last message repeated 3 times Sep 13 14:07:32 ugo kernel: [ 850.892000] ADDRCONF(NETDEV_UP): eth1: link is not ready ============== this is syslog Sep 13 13:55:08 ugo NetworkManager: <info> Updating allowed wireless network lists. Sep 13 14:06:21 ugo kernel: [ 780.096000] ieee80211_crypt: registered algorithm 'NULL' Sep 13 14:06:21 ugo kernel: [ 780.104000] ieee80211: 802.11 data/management/control stack, git-1.1.13 Sep 13 14:06:21 ugo kernel: [ 780.104000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL PROTECTED]> Sep 13 14:06:21 ugo kernel: [ 780.148000] bcm43xx driver Sep 13 14:06:21 ugo kernel: [ 780.148000] PCI: Enabling device 0000:02:00.0 (0000 -> 0002) Sep 13 14:06:21 ugo kernel: [ 780.148000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Sep 13 14:06:21 ugo kernel: [ 780.148000] PCI: Setting latency timer of device 0000:02:00.0 to 64 Sep 13 14:06:21 ugo kernel: [ 780.184000] ACPI: PCI interrupt for device 0000:02:00.0 disabled Sep 13 14:06:21 ugo kernel: [ 780.184000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Sep 13 14:06:21 ugo NetworkManager: <debug> [1189685181.994929] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/net_00_90_4b_23_8b_aa'). Sep 13 14:06:22 ugo kernel: [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 Sep 13 14:06:22 ugo last message repeated 7 times Sep 13 14:06:22 ugo kernel: [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 Sep 13 14:06:22 ugo last message repeated 2 times Sep 13 14:06:22 ugo NetworkManager: <info> eth1: Device is fully-supported using driver 'bcm43xx'. Sep 13 14:06:22 ugo NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start Sep 13 14:06:22 ugo kernel: [ 780.836000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 Sep 13 14:06:22 ugo kernel: [ 780.836000] ADDRCONF(NETDEV_UP): eth1: link is not ready Sep 13 14:06:22 ugo NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. Sep 13 14:06:22 ugo NetworkManager: <info> Now managing wireless (802.11) device 'eth1'. Sep 13 14:06:22 ugo NetworkManager: <info> Deactivating device eth1. Sep 13 14:07:31 ugo NetworkManager: <debug> [1189685251.830328] nm_hal_device_removed(): Device removed (hal udi is '/org/freedesktop/Hal/devices/net_00_90_4b_23_8b_aa'). Sep 13 14:07:31 ugo NetworkManager: <info> Deactivating device eth1. Sep 13 14:07:32 ugo kernel: [ 850.356000] ACPI: PCI interrupt for device 0000:02:00.0 disabled Sep 13 14:07:32 ugo kernel: [ 850.356000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 11 (level, low) -> IRQ 11 Sep 13 14:07:32 ugo NetworkManager: <debug> [1189685252.096344] nm_hal_device_added(): New device added (hal udi is '/org/freedesktop/Hal/devices/net_00_90_4b_23_8b_aa'). Sep 13 14:07:32 ugo kernel: [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1112 Sep 13 14:07:32 ugo last message repeated 7 times Sep 13 14:07:32 ugo kernel: [ 850.888000] bcm43xx: TODO: Incomplete code in keymac_write() at /build/buildd/linux-source-2.6.22-2.6.22/drivers/net/wireless/bcm43xx/bcm43xx_main.c:1114 Sep 13 14:07:32 ugo last message repeated 3 times Sep 13 14:07:32 ugo kernel: [ 850.892000] ADDRCONF(NETDEV_UP): eth1: link is not ready Sep 13 14:07:32 ugo NetworkManager: <info> eth1: Device is fully-supported using driver 'bcm43xx'. Sep 13 14:07:32 ugo NetworkManager: <info> nm_device_init(): waiting for device's worker thread to start Sep 13 14:07:32 ugo NetworkManager: <info> nm_device_init(): device's worker thread started, continuing. Sep 13 14:07:32 ugo NetworkManager: <info> Now managing wireless (802.11) device 'eth1'. Sep 13 14:07:32 ugo NetworkManager: <info> Deactivating device eth1. ==================== Thanks for your support and thanks for Ubuntu NDV -- Broadcom bcm43xx Wireless driver regression in gutsy https://bugs.launchpad.net/bugs/124159 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
