** Description changed: Update: The issue still exists and is _not_ releated to BIOS or UEFI firmware, - as I have tried to get the device working on 3 different hosts. I have - found that using aplay to play a test file will play choppy audio - accross all channels (the LEDs at the front of the device flicker very - fast, where they should only be active for the channels playing audio). - I tried all options from 1 (-c 1) to 10 (-c 10, the device has 10 output - channels), but the result is always the same: + as I have tried to get the device working on 3 different hosts. - $ aplay -D plughw:CARD=FCA610,DEV=0 -c 10 test.wav + Testing the device with aplay works fine for a stereo file: + + aplay -D plughw:CARD=FCA610,DEV=0 test.wav Playing WAVE 'test.wav' : Signed 16 bit Little Endian, Rate 44100 Hz, Stereo - aplay: pcm_write:1939: write error: No such device + ^CAborted by signal Interrupt... + aplay: pcm_write:1939: write error: Interrupted system call - The device fails after a few seconds and has to be replugged or power - cycled. + PulseAudio is still not able to use/configure the device (see comment + #20 for error message) and alsamixer still shows only the "Clock + Selector" control. Release tested: trusty Kernels tested: the latest mainline as of today (3.14.0-999-generic_3.14.0-999.201404130205) and the latest trusty kernel as of today (3.13.0-24-generic) --- I am trying to get the new Behringer FCA610 USB/Firewire audio interface to work via USB connection (issue might also affect the bigger FCA1616 model). I haven't tried Firewire since my computers don't have have Firewire inputs anymore. The device is detected as "Device: FCA610 Chip: USB Mixer" in alsamixer but only shows a control named "Clock Selector" with the following options: SPDIF Input, USB-Bus (SOF), Device Internal Clock. Attached files are from my workstation running 12.10, but I have also tried 13.04 and saucy. What I expected to happen: At least some inputs and (stereo) outputs should show up in alsamixer. Ideally 4 stereo outputs (including pulseaudio profiles for stereo up to 7.1), 2 mic/instrument inputs as well as toslink in and out were expected to be working. What happened: Only a control named "Clock Selector" is visible in alsamixer (View: F5: All), nothing in pavucontrol or sound settings. --- cat /proc/asound/FCA610/usbmixer USB Mixer: usb_id=0x13970003, ctrlif=0, ctlerr=0 Card: BEHRINGER FCA610 at usb-0000:00:14.0-2, high speed Unit: 211 Control: name="Clock Selector", index=0 Info: id=211, control=1, cmask=0x0, channels=1, type="U8" Volume: min=1, max=3, dBmin=0, dBmax=0 cat /proc/asound/FCA610/stream0 BEHRINGER FCA610 at usb-0000:00:14.0-2, high speed : USB Audio Playback: Status: Stop Interface 2 Altset 1 Format: S32_LE Channels: 10 Endpoint: 2 OUT (ASYNC) Rates: 44100, 48000, 88200, 96000 Data packet interval: 125 us Capture: Status: Stop Interface 1 Altset 1 Format: S32_LE Channels: 6 Endpoint: 1 IN (ASYNC) Rates: 44100, 48000, 88200, 96000 Data packet interval: 125 us ProblemType: Bug DistroRelease: Ubuntu 12.10 Package: pulseaudio 1:2.1-0ubuntu4.1 ProcVersionSignature: Ubuntu 3.5.0-34.55-generic 3.5.7.13 Uname: Linux 3.5.0-34-generic x86_64 ApportVersion: 2.6.1-0ubuntu11 Architecture: amd64 Date: Sun Jul 7 03:42:14 2013 InstallationDate: Installed on 2012-10-20 (259 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) MarkForUpload: True ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=<set> LANG=de_DE.UTF-8 SHELL=/bin/bash SourcePackage: pulseaudio Symptom: audio Symptom_Card: USB-Audio - FCA610 Title: [USB-Audio - FCA610, playback] Pulseaudio fails to detect card UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 05/09/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2003 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P8Z77-M dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2003:bd05/09/2013:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnP8Z77-M:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer modified.conffile..etc.pulse.daemon.conf: [modified] modified.conffile..etc.pulse.default.pa: [modified] mtime.conffile..etc.pulse.daemon.conf: 2012-11-14T23:08:28 mtime.conffile..etc.pulse.default.pa: 2012-11-14T23:06:17 --- ApportVersion: 2.6.1-0ubuntu11 Architecture: amd64 CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. DistroRelease: Ubuntu 12.10 HibernationDevice: RESUME=UUID=0893f9f1-1bd7-4f18-8116-76400bb910a4 InstallationDate: Installed on 2012-10-20 (259 days ago) InstallationMedia: Ubuntu 12.10 "Quantal Quetzal" - Release amd64 (20121017.5) IwConfig: vboxnet0 no wireless extensions. eth0 no wireless extensions. lo no wireless extensions. MachineType: System manufacturer System Product Name MarkForUpload: True Package: linux (not installed) ProcEnviron: TERM=xterm PATH=(custom, no user) XDG_RUNTIME_DIR=<set> LANG=de_DE.UTF-8 SHELL=/bin/bash ProcFB: 0 inteldrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.5.0-34-generic root=UUID=cb53da38-db99-4d80-8f10-8349ff24bc3a ro quiet splash vt.handoff=7 ProcVersionSignature: Ubuntu 3.5.0-34.55-generic 3.5.7.13 RelatedPackageVersions: linux-restricted-modules-3.5.0-34-generic N/A linux-backports-modules-3.5.0-34-generic N/A linux-firmware 1.95.1 RfKill: 75: hci0: Bluetooth Soft blocked: no Hard blocked: no Tags: quantal running-unity Uname: Linux 3.5.0-34-generic x86_64 UpgradeStatus: No upgrade log present (probably fresh install) UserGroups: adm cdrom dip lpadmin plugdev sambashare sudo vboxusers dmi.bios.date: 05/09/2013 dmi.bios.vendor: American Megatrends Inc. dmi.bios.version: 2003 dmi.board.asset.tag: To be filled by O.E.M. dmi.board.name: P8Z77-M dmi.board.vendor: ASUSTeK COMPUTER INC. dmi.board.version: Rev 1.xx dmi.chassis.asset.tag: Asset-1234567890 dmi.chassis.type: 3 dmi.chassis.vendor: Chassis Manufacture dmi.chassis.version: Chassis Version dmi.modalias: dmi:bvnAmericanMegatrendsInc.:bvr2003:bd05/09/2013:svnSystemmanufacturer:pnSystemProductName:pvrSystemVersion:rvnASUSTeKCOMPUTERINC.:rnP8Z77-M:rvrRev1.xx:cvnChassisManufacture:ct3:cvrChassisVersion: dmi.product.name: System Product Name dmi.product.version: System Version dmi.sys.vendor: System manufacturer
-- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1198577 Title: USB-Audio - FCA610, playback Pulseaudio/ALSA fails to detect card To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1198577/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
