LinuxLover ha scritto:
> a) what kernel version are you running?  You can find this out by typing "cat 
> /proc/version' in a console
>   
Here the reply to "cat /proc/version":

Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 4.1.2 
(Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007

> b) this is the same as bug   ?
> https://bugs.launchpad.net/ubuntu/+source/linux-source-2.6.20/+bug/111412
>
>   
It seems to be a similar problem though dmesg is quite different
(I'm not and expert at all).

Please find attached "dmesg.txt".

Thanks a lot,
Francesco

> If it is the similar issue, please close this bug.  thanks
>
>
> ** Changed in: Ubuntu
>        Status: New => Incomplete
>
>   


[    0.000000] Linux version 2.6.20-16-generic ([EMAIL PROTECTED]) (gcc version 
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 
2.6.20-16.29-generic)
[    0.000000] BIOS-provided physical RAM map:
[    0.000000] sanitize start
[    0.000000] sanitize end
[    0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009f800 
end: 000000000009f800 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000000009f800 size: 0000000000000800 
end: 00000000000a0000 type: 2
[    0.000000] copy_e820_map() start: 00000000000dc000 size: 0000000000024000 
end: 0000000000100000 type: 2
[    0.000000] copy_e820_map() start: 0000000000100000 size: 000000003f570000 
end: 000000003f670000 type: 1
[    0.000000] copy_e820_map() type is E820_RAM
[    0.000000] copy_e820_map() start: 000000003f670000 size: 0000000000090000 
end: 000000003f700000 type: 4
[    0.000000] copy_e820_map() start: 000000003f700000 size: 0000000000900000 
end: 0000000040000000 type: 2
[    0.000000] copy_e820_map() start: 00000000e0000000 size: 0000000010000000 
end: 00000000f0000000 type: 2
[    0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000010000 
end: 00000000fec10000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed00000 size: 0000000000000400 
end: 00000000fed00400 type: 2
[    0.000000] copy_e820_map() start: 00000000fed14000 size: 0000000000006000 
end: 00000000fed1a000 type: 2
[    0.000000] copy_e820_map() start: 00000000fed1c000 size: 0000000000074000 
end: 00000000fed90000 type: 2
[    0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000001000 
end: 00000000fee01000 type: 2
[    0.000000] copy_e820_map() start: 00000000ff000000 size: 0000000001000000 
end: 0000000100000000 type: 2
[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
[    0.000000]  BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
[    0.000000]  BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
[    0.000000]  BIOS-e820: 0000000000100000 - 000000003f670000 (usable)
[    0.000000]  BIOS-e820: 000000003f670000 - 000000003f700000 (ACPI NVS)
[    0.000000]  BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[    0.000000]  BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
[    0.000000]  BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
[    0.000000]  BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[    0.000000]  BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[    0.000000] 118MB HIGHMEM available.
[    0.000000] 896MB LOWMEM available.
[    0.000000] found SMP MP-table at 000f65c0
[    0.000000] Entering add_active_range(0, 0, 259696) 0 entries of 256 used
[    0.000000] Zone PFN ranges:
[    0.000000]   DMA             0 ->     4096
[    0.000000]   Normal       4096 ->   229376
[    0.000000]   HighMem    229376 ->   259696
[    0.000000] early_node_map[1] active PFN ranges
[    0.000000]     0:        0 ->   259696
[    0.000000] On node 0 totalpages: 259696
[    0.000000]   DMA zone: 32 pages used for memmap
[    0.000000]   DMA zone: 0 pages reserved
[    0.000000]   DMA zone: 4064 pages, LIFO batch:0
[    0.000000]   Normal zone: 1760 pages used for memmap
[    0.000000]   Normal zone: 223520 pages, LIFO batch:31
[    0.000000]   HighMem zone: 236 pages used for memmap
[    0.000000]   HighMem zone: 30084 pages, LIFO batch:7
[    0.000000] DMI present.
[    0.000000] ACPI: RSDP (v000 TOSINV                                ) @ 
0x000f6510
[    0.000000] ACPI: RSDT (v001 TOSINV Capell00 0x06040000  LTP 0x00000000) @ 
0x3f67e201
[    0.000000] ACPI: FADT (v001 TOSINV CALISTGA 0x06040000 LOHR 0x0000005a) @ 
0x3f685dee
[    0.000000] ACPI: MADT (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 
0x3f685e62
[    0.000000] ACPI: HPET (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 
0x3f685eca
[    0.000000] ACPI: MCFG (v001 INTEL  CALISTGA 0x06040000 LOHR 0x0000005a) @ 
0x3f685f02
[    0.000000] ACPI: BOOT (v001 PTLTD  $SBFTBL$ 0x06040000  LTP 0x00000001) @ 
0x3f685fd8
[    0.000000] ACPI: MADT (v001 TOSINV   APIC   0x06040000  LTP 0x00000000) @ 
0x3f685f70
[    0.000000] ACPI: SSDT (v001 SataRe  SataPri 0x00001000 INTL 0x20050624) @ 
0x3f67f263
[    0.000000] ACPI: SSDT (v001 SataRe  SataSec 0x00001000 INTL 0x20050624) @ 
0x3f67ebd1
[    0.000000] ACPI: SSDT (v001  PmRef    CpuPm 0x00003000 INTL 0x20050624) @ 
0x3f67e249
[    0.000000] ACPI: DSDT (v001 TOSINV CALISTGA 0x06040000 INTL 0x20050624) @ 
0x00000000
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: 2 duplicate APIC table ignored.
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] Processor #0 6:15 APIC version 20
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] Processor #1 6:15 APIC version 20
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ2 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs
[    0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] Allocating PCI resources starting at 50000000 (gap: 
40000000:a0000000)
[    0.000000] Detected 1662.694 MHz processor.
[   14.891463] Built 1 zonelists.  Total pages: 257668
[   14.891467] Kernel command line: 
root=UUID=d5d749a5-e744-4015-90d3-bbeca410dc54 ro quiet splash
[   14.891609] mapped APIC to ffffd000 (fee00000)
[   14.891611] mapped IOAPIC to ffffc000 (fec00000)
[   14.891614] Enabling fast FPU save and restore... done.
[   14.891618] Enabling unmasked SIMD FPU exception support... done.
[   14.891625] Initializing CPU#0
[   14.891697] PID hash table entries: 4096 (order: 12, 16384 bytes)
[   14.893344] Console: colour VGA+ 80x25
[   14.893619] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[   14.893915] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[   14.918829] Memory: 1018592k/1038784k available (1992k kernel code, 19400k 
reserved, 900k data, 328k init, 121280k highmem)
[   14.918837] virtual kernel memory layout:
[   14.918838]     fixmap  : 0xfff4e000 - 0xfffff000   ( 708 kB)
[   14.918839]     pkmap   : 0xff800000 - 0xffc00000   (4096 kB)
[   14.918841]     vmalloc : 0xf8800000 - 0xff7fe000   ( 111 MB)
[   14.918842]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB)
[   14.918843]       .init : 0xc03d9000 - 0xc042b000   ( 328 kB)
[   14.918844]       .data : 0xc02f2374 - 0xc03d36d4   ( 900 kB)
[   14.918845]       .text : 0xc0100000 - 0xc02f2374   (1992 kB)
[   14.918848] Checking if this processor honours the WP bit even in supervisor 
mode... Ok.
[   14.919014] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[   14.919019] hpet0: 3 64-bit timers, 14318180 Hz
[   14.920024] Using HPET for base-timer
[   14.998896] Calibrating delay using timer specific routine.. 3328.96 
BogoMIPS (lpj=6657931)
[   14.998932] Security Framework v1.0.0 initialized
[   14.998938] SELinux:  Disabled at boot.
[   14.998951] Mount-cache hash table entries: 512
[   14.999070] CPU: After generic identify, caps: bfebfbff 20000000 00000000 
00000000 0000e39d 00000000 00000001
[   14.999078] monitor/mwait feature present.
[   14.999080] using mwait in idle threads.
[   14.999084] CPU: L1 I cache: 32K, L1 D cache: 32K
[   14.999086] CPU: L2 cache: 2048K
[   14.999088] CPU: Physical Processor ID: 0
[   14.999090] CPU: Processor Core ID: 0
[   14.999092] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 
0000e39d 00000000 00000001
[   14.999101] Compat vDSO mapped to ffffe000.
[   14.999104] Remapping vsyscall page to ffffe000
[   14.999115] Checking 'hlt' instruction... OK.
[   15.014962] SMP alternatives: switching to UP code
[   15.015276] Early unpacking initramfs... done
[   15.331801] ACPI: Core revision 20060707
[   15.332075] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, 
using machine DSDT.
[   15.389636] CPU0: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   15.389653] SMP alternatives: switching to SMP code
[   15.389731] Booting processor 1/1 eip 3000
[   15.400139] Initializing CPU#1
[   15.478164] Calibrating delay using timer specific routine.. 3325.09 
BogoMIPS (lpj=6650194)
[   15.478170] CPU: After generic identify, caps: bfebfbff 20000000 00000000 
00000000 0000e39d 00000000 00000001
[   15.478175] monitor/mwait feature present.
[   15.478178] CPU: L1 I cache: 32K, L1 D cache: 32K
[   15.478180] CPU: L2 cache: 2048K
[   15.478182] CPU: Physical Processor ID: 0
[   15.478183] CPU: Processor Core ID: 1
[   15.478185] CPU: After all inits, caps: bfebfbff 20000000 00000000 00003940 
0000e39d 00000000 00000001
[   15.478678] CPU1: Intel(R) Core(TM)2 CPU         T5500  @ 1.66GHz stepping 06
[   15.478701] Total of 2 processors activated (6654.06 BogoMIPS).
[   15.478906] ENABLING IO-APIC IRQs
[   15.479109] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[   15.625937] checking TSC synchronization across 2 CPUs: passed.
[    0.003996] Brought up 2 CPUs
[    0.164509] migration_cost=72
[    0.164776] Booting paravirtualized kernel on bare hardware
[    0.164877] Time:  9:42:39  Date: 07/25/107
[    0.164907] NET: Registered protocol family 16
[    0.164988] EISA bus registered
[    0.164993] ACPI: bus type pci registered
[    0.165109] PCI: PCI BIOS revision 2.10 entry at 0xfd875, last bus=7
[    0.165111] PCI: Using configuration type 1
[    0.165113] Setting up standard PCI resources
[    0.172138] ACPI: Interpreter enabled
[    0.172140] ACPI: Using IOAPIC for interrupt routing
[    0.172853] ACPI: PCI Root Bridge [PCI0] (0000:00)
[    0.172858] PCI: Probing PCI hardware (bus 00)
[    0.173772] Boot video device is 0000:00:02.0
[    0.174464] PCI quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[    0.174469] PCI quirk: region 1180-11bf claimed by ICH6 GPIO
[    0.175539] PCI: Firmware left 0000:07:08.0 e100 interrupts enabled, 
disabling
[    0.175633] PCI: Transparent bridge - 0000:00:1e.0
[    0.175708] PCI: Bus #08 (-#0b) is hidden behind transparent bridge #07 
(-#07) (try 'pci=assign-busses')
[    0.175711] Please report the result to linux-kernel to fix this permanently
[    0.175799] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[    0.336396] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[    0.336655] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[    0.336914] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[    0.338071] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[    0.367871] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) 
*11
[    0.368122] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.368371] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.368623] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) 
*10
[    0.368871] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.369121] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) 
*0, disabled.
[    0.369370] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[    0.369619] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[    0.467614] ACPI: Power Resource [FN00] (off)
[    0.467756] Linux Plug and Play Support v0.97 (c) Adam Belay
[    0.467768] pnp: PnP ACPI init
[    0.563322] pnp: PnP ACPI: found 10 devices
[    0.563327] PnPBIOS: Disabled by ACPI PNP
[    0.563369] PCI: Using ACPI for IRQ routing
[    0.563372] PCI: If a device doesn't work, try "pci=routeirq".  If it helps, 
post a report
[    0.595119] NET: Registered protocol family 8
[    0.595121] NET: Registered protocol family 20
[    0.595594] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[    0.595599] PCI: Bridge: 0000:00:1c.0
[    0.595601]   IO window: disabled.
[    0.595607]   MEM window: disabled.
[    0.595611]   PREFETCH window: disabled.
[    0.595617] PCI: Bridge: 0000:00:1c.1
[    0.595621]   IO window: 2000-2fff
[    0.595627]   MEM window: d8000000-d9ffffff
[    0.595633]   PREFETCH window: d2000000-d3ffffff
[    0.595639] PCI: Bridge: 0000:00:1c.2
[    0.595642]   IO window: 3000-3fff
[    0.595649]   MEM window: da000000-dbffffff
[    0.595653]   PREFETCH window: d4000000-d5ffffff
[    0.595666] PCI: Bus 8, cardbus bridge: 0000:07:06.0
[    0.595668]   IO window: 00004400-000044ff
[    0.595673]   IO window: 00004800-000048ff
[    0.595678]   PREFETCH window: 50000000-53ffffff
[    0.595684]   MEM window: 54000000-57ffffff
[    0.595689] PCI: Bridge: 0000:00:1e.0
[    0.595692]   IO window: 4000-4fff
[    0.595698]   MEM window: dc000000-dc0fffff
[    0.595703]   PREFETCH window: 50000000-53ffffff
[    0.595735] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> 
IRQ 16
[    0.595742] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    0.595767] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> 
IRQ 17
[    0.595773] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    0.595798] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> 
IRQ 18
[    0.595805] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    0.595819] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[    0.595837] PCI: Enabling device 0000:07:06.0 (0000 -> 0003)
[    0.595841] ACPI: PCI Interrupt 0000:07:06.0[A] -> GSI 18 (level, low) -> 
IRQ 18
[    0.595872] NET: Registered protocol family 2
[    0.643053] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.643153] TCP established hash table entries: 131072 (order: 8, 1048576 
bytes)
[    0.643631] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[    0.643875] TCP: Hash tables configured (established 131072 bind 65536)
[    0.643878] TCP reno registered
[    0.659101] checking if image is initramfs... it is
[    1.281947] Freeing initrd memory: 6743k freed
[    1.282162] Simple Boot Flag at 0x36 set to 0x1
[    1.282633] audit: initializing netlink socket (disabled)
[    1.282648] audit(1188034960.024:1): initialized
[    1.282743] highmem bounce pool size: 64 pages
[    1.282830] VFS: Disk quotas dquot_6.5.1
[    1.282849] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    1.282899] io scheduler noop registered
[    1.282902] io scheduler anticipatory registered
[    1.282904] io scheduler deadline registered
[    1.282917] io scheduler cfq registered (default)
[    1.283167] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[    1.283229] assign_interrupt_mode Found MSI capability
[    1.283232] Allocate Port Service[0000:00:1c.0:pcie00]
[    1.283267] Allocate Port Service[0000:00:1c.0:pcie02]
[    1.283403] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[    1.283464] assign_interrupt_mode Found MSI capability
[    1.283467] Allocate Port Service[0000:00:1c.1:pcie00]
[    1.283501] Allocate Port Service[0000:00:1c.1:pcie02]
[    1.283631] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[    1.283692] assign_interrupt_mode Found MSI capability
[    1.283695] Allocate Port Service[0000:00:1c.2:pcie00]
[    1.283728] Allocate Port Service[0000:00:1c.2:pcie02]
[    1.283917] isapnp: Scanning for PnP cards...
[    1.637116] isapnp: No Plug & Play device found
[    1.658577] Real Time Clock Driver v1.12ac
[    1.658640] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing 
enabled
[    1.659269] mice: PS/2 mouse device common for all mice
[    1.659838] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 
blocksize
[    1.659983] input: Macintosh mouse button emulation as /class/input/input0
[    1.660023] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[    1.660026] ide: Assuming 33MHz system bus speed for PIO modes; override 
with idebus=xx
[    1.660332] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 
irq 1,12
[    1.662645] i8042.c: Detected active multiplexing controller, rev 1.1.
[    1.664123] serio: i8042 KBD port at 0x60,0x64 irq 1
[    1.664127] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[    1.664130] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[    1.664132] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[    1.664135] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[    1.664236] EISA: Probing bus 0 at eisa.0
[    1.664243] Cannot allocate resource for EISA slot 1
[    1.664247] Cannot allocate resource for EISA slot 2
[    1.664249] Cannot allocate resource for EISA slot 3
[    1.664251] Cannot allocate resource for EISA slot 4
[    1.664269] EISA: Detected 0 cards.
[    1.694323] TCP cubic registered
[    1.694331] NET: Registered protocol family 1
[    1.694353] Starting balanced_irq
[    1.694360] Using IPI No-Shortcut mode
[    1.694470] ACPI: (supports S0 S3 S4 S5)
[    1.694519]   Magic number: 3:528:728
[    1.694792] Freeing unused kernel memory: 328k freed
[    1.697412] Time: tsc clocksource has been installed.
[    1.697706] input: AT Translated Set 2 keyboard as /class/input/input1
[    2.898613] Capability LSM initialized
[    2.933034] ACPI: Transitioning device [FAN0] to D3
[    2.933037] ACPI: Transitioning device [FAN0] to D3
[    2.933042] ACPI: Fan [FAN0] (off)
[    2.937281] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] 
OemTableId [ Cpu0Ist] [20060707]
[    2.937496] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] 
OemTableId [ Cpu0Cst] [20060707]
[    2.937771] ACPI: CPU0 (power states: C1[C1] C2[C2])
[    2.937776] ACPI: Processor [CPU0] (supports 8 throttling states)
[    2.938271] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] 
OemTableId [ Cpu1Ist] [20060707]
[    2.938472] ACPI (exconfig-0455): Dynamic SSDT Load - OemId [ PmRef] 
OemTableId [ Cpu1Cst] [20060707]
[    2.938788] ACPI: CPU1 (power states: C1[C1] C2[C2])
[    2.938793] ACPI: Processor [CPU1] (supports 8 throttling states)
[    2.939593] ACPI: Thermal Zone [TZ00] (31 C)
[    2.940282] ACPI: Invalid passive threshold
[    2.945200] ACPI: Transitioning device [FAN0] to D0
[    2.945203] ACPI: Transitioning device [FAN0] to D0
[    2.945205] ACPI: Unable to turn cooling device [df93f39c] 'on'
[    2.945208] ACPI: Thermal Zone [TZ01] (30 C)
[    3.528000] Time: hpet clocksource has been installed.
[    3.880000] usbcore: registered new interface driver usbfs
[    3.880000] usbcore: registered new interface driver hub
[    3.880000] usbcore: registered new device driver usb
[    3.880000] USB Universal Host Controller Interface driver v3.0
[    3.880000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> 
IRQ 19
[    3.880000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    3.880000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    3.880000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus 
number 1
[    3.880000] uhci_hcd 0000:00:1d.0: irq 19, io base 0x00001820
[    3.880000] usb usb1: configuration #1 chosen from 1 choice
[    3.880000] hub 1-0:1.0: USB hub found
[    3.880000] hub 1-0:1.0: 2 ports detected
[    3.968000] e100: Intel(R) PRO/100 Network Driver, 3.5.17-k2-NAPI
[    3.968000] e100: Copyright(c) 1999-2006 Intel Corporation
[    3.972000] ieee1394: Initialized config rom entry `ip1394'
[    3.988000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> 
IRQ 20
[    3.988000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    3.988000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    3.988000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus 
number 2
[    3.988000] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00001840
[    3.988000] usb usb2: configuration #1 chosen from 1 choice
[    3.988000] hub 2-0:1.0: USB hub found
[    3.988000] hub 2-0:1.0: 2 ports detected
[    4.092000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> 
IRQ 18
[    4.092000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    4.092000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.092000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus 
number 3
[    4.092000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[    4.092000] usb usb3: configuration #1 chosen from 1 choice
[    4.092000] hub 3-0:1.0: USB hub found
[    4.092000] hub 3-0:1.0: 2 ports detected
[    4.196000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> 
IRQ 17
[    4.196000] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[    4.196000] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    4.196000] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus 
number 4
[    4.196000] uhci_hcd 0000:00:1d.3: irq 17, io base 0x00001880
[    4.196000] usb usb4: configuration #1 chosen from 1 choice
[    4.196000] hub 4-0:1.0: USB hub found
[    4.196000] hub 4-0:1.0: 2 ports detected
[    4.300000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> 
IRQ 19
[    4.300000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    4.300000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    4.300000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus 
number 5
[    4.300000] ehci_hcd 0000:00:1d.7: debug port 1
[    4.300000] PCI: cache line size of 32 is not supported by device 
0000:00:1d.7
[    4.300000] ehci_hcd 0000:00:1d.7: irq 19, io mem 0xdc444000
[    4.304000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 
2004
[    4.304000] usb usb5: configuration #1 chosen from 1 choice
[    4.304000] hub 5-0:1.0: USB hub found
[    4.304000] hub 5-0:1.0: 8 ports detected
[    4.408000] ACPI: PCI Interrupt 0000:07:08.0[A] -> GSI 20 (level, low) -> 
IRQ 21
[    4.436000] e100: eth0: e100_probe: addr 0xdc005000, irq 21, MAC addr 
00:A0:D1:4F:1D:FF
[    4.440000] ACPI: PCI Interrupt 0000:07:06.1[B] -> GSI 17 (level, low) -> 
IRQ 16
[    4.440000] SCSI subsystem initialized
[    4.492000] libata version 2.20 loaded.
[    4.492000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  
MMIO=[dc006000-dc0067ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    4.492000] ata_piix 0000:00:1f.2: version 2.10ac1
[    4.492000] ata_piix 0000:00:1f.2: MAP [ P0 P2 IDE IDE ]
[    4.648000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> 
IRQ 20
[    4.648000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    4.648000] ata1: SATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma 
0x000118b0 irq 14
[    4.652000] ata2: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 
0x000118b8 irq 15
[    4.652000] scsi0 : ata_piix
[    4.816000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 
195371568
[    4.816000] ata1.00: ATA-6: TOSHIBA MK1032GSX, AS021G, max UDMA/100
[    4.816000] ata1.00: 195371568 sectors, multi 16: LBA48 NCQ (depth 0/32)
[    4.824000] ata1.00: ata_hpa_resize 1: sectors = 195371568, hpa_sectors = 
195371568
[    4.824000] ata1.00: configured for UDMA/100
[    4.824000] scsi1 : ata_piix
[    5.148000] ata2.00: ATAPI, max UDMA/33
[    5.228000] usb 3-1: new low speed USB device using uhci_hcd and address 2
[    5.312000] ata2.00: configured for UDMA/33
[    5.312000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK1032GS AS02 
PQ: 0 ANSI: 5
[    5.312000] scsi 1:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-841S  1.60 
PQ: 0 ANSI: 5
[    5.324000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[    5.324000] sda: Write Protect is off
[    5.324000] sda: Mode Sense: 00 3a 00 00
[    5.324000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    5.324000] SCSI device sda: 195371568 512-byte hdwr sectors (100030 MB)
[    5.324000] sda: Write Protect is off
[    5.324000] sda: Mode Sense: 00 3a 00 00
[    5.324000] SCSI device sda: write cache: enabled, read cache: enabled, 
doesn't support DPO or FUA
[    5.324000]  sda: sda1 sda2 sda3 sda4
[    5.380000] sd 0:0:0:0: Attached scsi disk sda
[    5.380000] usb 3-1: configuration #1 chosen from 1 choice
[    5.384000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    5.384000] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    5.388000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda 
tray
[    5.388000] Uniform CD-ROM driver Revision: 3.20
[    5.388000] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    5.624000] usb 3-2: new low speed USB device using uhci_hcd and address 3
[    5.708000] Attempting manual resume
[    5.708000] swsusp: Resume From Partition 8:3
[    5.708000] PM: Checking swsusp image.
[    5.708000] PM: Resume from disk failed.
[    5.728000] kjournald starting.  Commit interval 5 seconds
[    5.728000] EXT3-fs: mounted filesystem with ordered data mode.
[    5.808000] usb 3-2: configuration #1 chosen from 1 choice
[    5.812000] usbcore: registered new interface driver hiddev
[    5.824000] input: HID 062a:0000 as /class/input/input2
[    5.824000] input: USB HID v1.10 Mouse [HID 062a:0000] on usb-0000:00:1d.2-1
[    5.840000] input: NOVATEK USB Keyboard as /class/input/input3
[    5.840000] input: USB HID v1.10 Keyboard [NOVATEK USB Keyboard] on 
usb-0000:00:1d.2-2
[    5.876000] input: NOVATEK USB Keyboard as /class/input/input4
[    5.876000] input,hiddev96: USB HID v1.10 Device [NOVATEK USB Keyboard] on 
usb-0000:00:1d.2-2
[    5.876000] usbcore: registered new interface driver usbhid
[    5.876000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[   14.472000] e100: eth0: e100_watchdog: link up, 100Mbps, full-duplex
[   15.436000] iTCO_vendor_support: vendor-support=0
[   15.444000] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01 (11-Nov-2006)
[   15.444000] iTCO_wdt: Found a ICH7-M TCO device (Version=2, TCOBASE=0x1060)
[   15.444000] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[   15.476000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   15.480000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   15.728000] Yenta: CardBus bridge found at 0000:07:06.0 [1179:ff10]
[   15.728000] Yenta: Enabling burst memory read transactions
[   15.728000] Yenta: Using CSCINT to route CSC interrupts to PCI
[   15.728000] Yenta: Routing CardBus interrupts to PCI
[   15.728000] Yenta TI: socket 0000:07:06.0, mfunc 0x01a01b22, devctl 0x66
[   15.764000] intel_rng: FWH not detected
[   15.828000] ieee80211_crypt: registered algorithm 'NULL'
[   15.832000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   15.832000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <[EMAIL 
PROTECTED]>
[   15.948000] NET: Registered protocol family 17
[   15.960000] Yenta: ISA IRQ mask 0x0cf8, PCI irq 18
[   15.960000] Socket status: 30000006
[   15.960000] Yenta: Raising subordinate bus# of parent bus (#07) from #07 to 
#0b
[   15.960000] pcmcia: parent PCI bridge I/O window: 0x4000 - 0x4fff
[   15.960000] cs: IO port probe 0x4000-0x4fff: clean.
[   15.960000] pcmcia: parent PCI bridge Memory window: 0xdc000000 - 0xdc0fffff
[   15.960000] pcmcia: parent PCI bridge Memory window: 0x50000000 - 0x53ffffff
[   15.960000] ACPI: PCI Interrupt 0000:07:06.2[A] -> GSI 18 (level, low) -> 
IRQ 18
[   15.984000] Linux agpgart interface v0.102 (c) Dave Jones
[   15.984000] agpgart: Detected an Intel 945GM Chipset.
[   15.988000] agpgart: Detected 7932K stolen memory.
[   16.004000] agpgart: AGP aperture is 256M @ 0xc0000000
[   16.012000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver 
for Linux, 1.2.0mp
[   16.012000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   16.012000] ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 18 (level, low) -> 
IRQ 18
[   16.012000] PCI: Setting latency timer of device 0000:05:00.0 to 64
[   16.012000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   16.020000] sdhci: Secure Digital Host Controller Interface driver
[   16.020000] sdhci: Copyright(c) Pierre Ossman
[   16.088000] sdhci: SDHCI controller found at 0000:07:06.3 [104c:803c] (rev 0)
[   16.088000] ACPI: PCI Interrupt 0000:07:06.3[A] -> GSI 18 (level, low) -> 
IRQ 18
[   16.088000] mmc0: SDHCI at 0xdc006800 irq 18 DMA
[   16.120000] usbcore: registered new interface driver xpad
[   16.120000] drivers/usb/input/xpad.c: driver for Xbox controllers v0.1.6
[   16.488000] cs: IO port probe 0x100-0x3af: clean.
[   16.488000] cs: IO port probe 0x3e0-0x4ff: excluding 0x400-0x407 0x4d0-0x4d7
[   16.492000] cs: IO port probe 0x820-0x8ff: clean.
[   16.492000] cs: IO port probe 0xc00-0xcf7: clean.
[   16.492000] cs: IO port probe 0xa00-0xaff: clean.
[   16.588000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0x25a0b1, caps: 
0xa04713/0x0
[   16.588000] synaptics: Toshiba Satellite A100 detected, limiting rate to 
40pps.
[   16.624000] input: SynPS/2 Synaptics TouchPad as /class/input/input5
[   16.696000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> 
IRQ 22
[   16.696000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   17.332000] lp: driver loaded but no devices found
[   17.392000] apm: BIOS not found.
[   17.492000] fuse init (API version 7.8)
[   17.524000] Adding 979956k swap on 
/dev/disk/by-uuid/172dcb0e-2901-4a2e-ae2b-d0260bc1209a.  Priority:-1 extents:1 
across:979956k
[   17.672000] EXT3 FS on sda2, internal journal
[   17.868000] kjournald starting.  Commit interval 5 seconds
[   17.868000] EXT3 FS on sda4, internal journal
[   17.868000] EXT3-fs: mounted filesystem with ordered data mode.
[   18.732000] ACPI: AC Adapter [ADP0] (on-line)
[   18.852000] ACPI: Battery Slot [BAT0] (battery absent)
[   18.864000] input: Power Button (FF) as /class/input/input6
[   18.864000] ACPI: Power Button (FF) [PWRF]
[   18.864000] input: Lid Switch as /class/input/input7
[   18.864000] ACPI: Lid Switch [LID]
[   18.864000] input: Power Button (CM) as /class/input/input8
[   18.864000] ACPI: Power Button (CM) [PWRB]
[   18.924000] Using specific hotkey driver
[   18.980000] ACPI: Error installing notify handler
[   18.980000] Device 'dock.0' does not have a release() function, it is broken 
and must be fixed.
[   18.980000] BUG: at drivers/base/core.c:104 device_release()
[   18.980000]  [<c01ed609>] kobject_cleanup+0x49/0x90
[   18.980000]  [<c01ed650>] kobject_release+0x0/0x10
[   18.980000]  [<c01ee30b>] kref_put+0x2b/0xa0
[   18.980000]  [<f8c8a723>] find_dock+0x1d0/0x1f0 [dock]
[   18.980000]  [<c021cb5d>] acpi_ns_walk_namespace+0xf9/0x114
[   18.980000]  [<c021b314>] acpi_walk_namespace+0x57/0x74
[   18.980000]  [<f8c8a553>] find_dock+0x0/0x1f0 [dock]
[   18.980000]  [<f8a3903c>] dock_init+0x3c/0x55 [dock]
[   18.980000]  [<f8c8a553>] find_dock+0x0/0x1f0 [dock]
[   18.980000]  [<c014422d>] sys_init_module+0x15d/0x1ba0
[   18.980000]  [<c0107a5d>] sys_mmap2+0xcd/0xd0
[   18.980000]  [<c01031f0>] sysenter_past_esp+0x69/0xa9
[   18.980000]  =======================
[   18.980000] No dock devices found.
[   19.068000] ibm_acpi: ec object not found
[   19.168000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post: no)
[   19.168000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   19.204000] pcc_acpi: loading...
[   24.804000] ppdev: user-space parallel port driver
[   24.832000] [drm] Initialized drm 1.1.0 20060810
[   24.856000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> 
IRQ 17
[   24.856000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   25.072000] NET: Registered protocol family 10
[   25.072000] lo: Disabled Privacy Extensions
[   28.344000] apm: BIOS not found.
[   30.272000] ACPI: PCI interrupt for device 0000:00:1b.0 disabled
[   30.300000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> 
IRQ 22
[   30.300000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   31.080000] Bluetooth: Core ver 2.11
[   31.080000] NET: Registered protocol family 31
[   31.080000] Bluetooth: HCI device and connection manager initialized
[   31.080000] Bluetooth: HCI socket layer initialized
[   31.212000] Bluetooth: L2CAP ver 2.8
[   31.212000] Bluetooth: L2CAP socket layer initialized
[   31.260000] Bluetooth: RFCOMM socket layer initialized
[   31.260000] Bluetooth: RFCOMM TTY layer initialized
[   31.260000] Bluetooth: RFCOMM ver 1.8
[   35.236000] eth0: no IPv6 routers present
[  344.948000] ACPI: Transitioning device [FAN0] to D0
[  344.948000] ACPI: Transitioning device [FAN0] to D0
[  344.948000] ACPI: Unable to turn cooling device [df93f39c] 'on'
[  345.260000] ACPI: Transitioning device [FAN0] to D0
[  345.260000] ACPI: Transitioning device [FAN0] to D0
[  345.260000] ACPI: Unable to turn cooling device [df93f39c] 'on'
[  492.996000] usb 5-4: new high speed USB device using ehci_hcd and address 4
[  493.132000] usb 5-4: configuration #1 chosen from 1 choice
[  493.208000] usbcore: registered new interface driver libusual
[  493.224000] Initializing USB Mass Storage driver...
[  493.224000] scsi2 : SCSI emulation for USB Mass Storage devices
[  493.224000] usbcore: registered new interface driver usb-storage
[  493.224000] USB Mass Storage support registered.
[  493.224000] usb-storage: device found at 4
[  493.224000] usb-storage: waiting for device to settle before scanning
[  498.224000] usb-storage: device scan complete
[  498.224000] scsi 2:0:0:0: Direct-Access     TOSHIBA  MK1032GAX        0811 
PQ: 0 ANSI: 0
[  498.228000] SCSI device sdb: 195371568 512-byte hdwr sectors (100030 MB)
[  498.228000] sdb: test WP failed, assume Write Enabled
[  498.228000] sdb: assuming drive cache: write through
[  498.228000] SCSI device sdb: 195371568 512-byte hdwr sectors (100030 MB)
[  498.228000] sdb: test WP failed, assume Write Enabled
[  498.228000] sdb: assuming drive cache: write through
[  498.228000]  sdb: sdb1
[  498.240000] sd 2:0:0:0: Attached scsi disk sdb
[  498.240000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[  603.664000] usb 5-4: USB disconnect, address 4
[ 1047.624000] usb 5-4: new high speed USB device using ehci_hcd and address 5
[ 1047.756000] usb 5-4: configuration #1 chosen from 1 choice
[ 1047.760000] scsi3 : SCSI emulation for USB Mass Storage devices
[ 1047.760000] usb-storage: device found at 5
[ 1047.760000] usb-storage: waiting for device to settle before scanning
[ 1052.760000] usb-storage: device scan complete
[ 1052.764000] scsi 3:0:0:0: Direct-Access     TOSHIBA  MK1032GAX        0811 
PQ: 0 ANSI: 0
[ 1052.764000] SCSI device sdb: 195371568 512-byte hdwr sectors (100030 MB)
[ 1052.764000] sdb: test WP failed, assume Write Enabled
[ 1052.764000] sdb: assuming drive cache: write through
[ 1052.764000] SCSI device sdb: 195371568 512-byte hdwr sectors (100030 MB)
[ 1052.768000] sdb: test WP failed, assume Write Enabled
[ 1052.768000] sdb: assuming drive cache: write through
[ 1052.768000]  sdb: sdb1
[ 1052.772000] sd 3:0:0:0: Attached scsi disk sdb
[ 1052.772000] sd 3:0:0:0: Attached scsi generic sg2 type 0

-- 
External hard drive not loading after kernel update
https://bugs.launchpad.net/bugs/110737
You received this bug notification because you are a member of Ubuntu
Bugs, which is the bug contact for Ubuntu.

-- 
ubuntu-bugs mailing list
ubuntu-bugs@lists.ubuntu.com
https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs

Reply via email to