Thanks for your attention to this bug. It's been a while, so I don't have any details to give you about the boot-up at that time, but I do recall that it did boot properly. The main problem (as far as I've figured it out) is that my Promise Ultra133TX2 PCI ATA133 card and my nVidia CK804 rev. f3 SATA controller keep getting their attached hard drives mixed-up. Here's what I mean:
[EMAIL PROTECTED]:~$ sudo blkid /dev/hda1: UUID="63f0e2a3-b520-42d8-943b-94e4b4a381b1" TYPE="reiserfs" /dev/hda2: UUID="1981f215-6f5b-4d93-9216-55ba82e34427" TYPE="reiserfs" /dev/hda3: UUID="c9d191a9-54eb-4a49-a60c-f818818acaa0" TYPE="reiserfs" /dev/hda4: UUID="abfe74bc-4a48-496f-9f15-094d868d41fa" TYPE="swap" /dev/sda1: LABEL="BACKUP" UUID="63ed91b2-a8c2-417c-b93f-985bbf1e93fb" TYPE="ext2" /dev/hdc1: UUID="ecb2eafe-3009-478f-84bb-70faea5115bc" SEC_TYPE="ext2" TYPE="ext3" /dev/hdc5: UUID="877dcd40-e70c-4cec-81fc-bb44dbd81f12" TYPE="swap" /dev/sdb1: TYPE="ntfs" /dev/sdc1: LABEL="PERSONAL" UUID="88813472-f156-4ee6-b8e9-41540ff07486" TYPE="ext2" [EMAIL PROTECTED]:~$ sudo mount /dev/hdc1 on / type ext3 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) /sys on /sys type sysfs (rw,noexec,nosuid,nodev) varrun on /var/run type tmpfs (rw,noexec,nosuid,nodev,mode=0755) varlock on /var/lock type tmpfs (rw,noexec,nosuid,nodev,mode=1777) procbususb on /proc/bus/usb type usbfs (rw) udev on /dev type tmpfs (rw,mode=0755) devshm on /dev/shm type tmpfs (rw) devpts on /dev/pts type devpts (rw,gid=5,mode=620) lrm on /lib/modules/2.6.20-16-generic/volatile type tmpfs (rw) /dev/hda1 on /media/hda1 type reiserfs (rw) /dev/hda2 on /media/hda2 type reiserfs (rw) /dev/hda3 on /media/hda3 type reiserfs (rw) /dev/sdc1 on /media/sda1 type ext2 (rw) /dev/sda1 on /media/sdb1 type ext2 (rw) /dev/sdb1 on /media/sdc1 type ntfs (rw,nls=utf8,umask=007,gid=46) binfmt_misc on /proc/sys/fs/binfmt_misc type binfmt_misc (rw) [EMAIL PROTECTED]:~$ sudo df -h Filesystem Size Used Avail Use% Mounted on /dev/hdc1 18G 16G 1.7G 91% / varrun 502M 116K 502M 1% /var/run varlock 502M 0 502M 0% /var/lock procbususb 502M 140K 502M 1% /proc/bus/usb udev 502M 140K 502M 1% /dev devshm 502M 0 502M 0% /dev/shm lrm 502M 39M 464M 8% /lib/modules/2.6.20-16-generic/volatile /dev/hda1 957M 128M 830M 14% /media/hda1 /dev/hda2 120G 41G 79G 34% /media/hda2 /dev/hda3 113G 107G 6.0G 95% /media/hda3 /dev/sdc1 294G 81G 199G 29% /media/sda1 /dev/sda1 74G 73G 0 100% /media/sdb1 /dev/sdb1 38G 28G 9.4G 76% /media/sdc1 As you can see, /dev/sda1, according to blkid, is an 80GB drive labeled "BACKUP", /dev/sdb1 is my 40GB Windows XP installation on NTFS (which, incidentally does not have a UUID, as NTFS usually doesn't), and /dev/sdc1 is a 300GB drive labeled "PERSONAL". In the blkid information in my April 4th, 2007 post, the aforementioned drives are as follows: /dev/sdc1: LABEL="PERSONAL" UUID="88813472-f156-4ee6-b8e9-41540ff07486" TYPE="ext2" /dev/sdb1: TYPE="ntfs" /dev/sda1: LABEL="PERSONAL" UUID="88813472-f156-4ee6-b8e9-41540ff07486" TYPE="ext2" /dev/sdb5: LABEL="BACKUP" UUID="438E-1221" TYPE="vfat" To my recollection, I have not changed any drive configurations since then, although I have switched to a 64-bit version of Ubuntu 7.04 on /dev/hdc1 (via a reinstall). My hardware (cables, jumpers, etc.) has not changed at all. You may also note that the UUIDs of my various partitions (except for hdc) have not changed, as I have not since reformatted or moved them. As for the contradictory mount points, I have configured them to how they (as far as I can tell) should be, which is how they show up in my fully-updated Gentoo installation (as of a week or so ago), which I installed about 1.5 years ago. If I am not mistaken, sda should be my first SCSI/SATA device, which is on my onboard nVidia SATA controller. sdb and sdc should be my first and second drives on my PCI IDE (PATA) card, respectively. Thanks again, and let me know if you need any more information. -- Fiesty: updates on 3-29-07 royally messed up fstab https://bugs.launchpad.net/bugs/98651 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
