The following commands correctly detect the card but the kernel should be able to pick this card up automatically
[EMAIL PROTECTED]:/home/asty# rmmod bttv [EMAIL PROTECTED]:/home/asty# modprobe bttv card=60 tuner=24 radio=1 [ 574.789968] bttv0: unloading [ 604.139442] bttv: driver version 0.9.17 loaded [ 604.139455] bttv: using 8 buffers with 2080k (520 pages) each for capture [ 604.140419] bttv: Bt8xx card found (0). [ 604.140449] bttv0: Bt849 (rev 18) at 0000:02:0a.0, irq: 3, latency: 64, mmio: 0xf43ff000 [ 604.140472] bttv0: using: Modular Technology MM100PCTV [card=60,insmod option] [ 604.140522] bttv0: gpio: en=00000000, out=00000000 in=00ffffff [init] [ 604.149297] bttv0: using tuner=24 [ 604.149314] bttv0: i2c: checking for MSP34xx @ 0x80... not found [ 604.150394] bttv0: i2c: checking for TDA9875 @ 0xb0... not found [ 604.151247] bttv0: i2c: checking for TDA7432 @ 0x8a... not found [ 604.152097] bttv0: i2c: checking for TDA9887 @ 0x86... not found [ 604.200242] tuner 0-0060: All bytes are equal. It is not a TEA5767 [ 604.200258] tuner 0-0060: chip found @ 0xc0 (bt849 #0 [sw]) [ 604.200610] tuner 0-0060: type set to 24 (Philips PAL/SECAM multi (FQ1216ME)) [ 604.202727] tuner 0-0060: type set to 24 (Philips PAL/SECAM multi (FQ1216ME)) [ 604.203050] tuner 0-0061: chip found @ 0xc2 (bt849 #0 [sw]) [ 604.212957] bttv0: registered device video0 [ 604.213001] bttv0: registered device vbi0 [ 604.213037] bttv0: registered device radio0 [ 604.213076] bttv0: PLL can sleep, using XTAL (35468950). -- [Gutsy] mm100pctv card is not detected https://bugs.launchpad.net/bugs/128902 You received this bug notification because you are a member of Ubuntu Bugs, which is the bug contact for Ubuntu. -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
