Public bug reported: Steps to reproduce: - Create some 'target' folder containing any files. - `mkfs.ubifs -e 0x1f800 -c 984 -m 0x800 -F -x lzo -d target -o rootfs.ubifs`. - Create the following 'ubinize.cfg' file: --- [ubifs] mode=ubi vol_id=0 vol_type=dynamic vol_name=rootfs vol_alignment=1 vol_flags=autoresize image=rootfs.ubifs --- - `ubinize -m 0x800 -p 0x20000 -s 0x200 -o rootfs.ubi ubinize.cfg`. - `sudo modprobe nandsim first_id_byte=0x2c second_id_byte=0xf1 third_id_byte=0x80 fourth_id_byte=0x95`. - `sudo nandwrite -p /dev/mtd0 rootfs.ubi`. - `sudo modprobe ubi mtd=0`.
Result: - After last command line: "ERROR: could not insert 'ubi': No space left on device". - In dmesg: --- [47346.410763] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [47346.410767] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [47346.410769] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [47346.410770] [nandsim] warning: read_byte: unexpected data output cycle, state is STATE_READY return 0x0 [47346.410774] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron NAND 128MiB 3,3V 8-bit), 128MiB, page size: 2048, OOB size: 64 [47346.410789] flash size: 128 MiB [47346.410790] page size: 2048 bytes [47346.410792] OOB area size: 64 bytes [47346.410793] sector size: 128 KiB [47346.410794] pages number: 65536 [47346.410795] pages per sector: 64 [47346.410796] bus width: 8 [47346.410797] bits in sector size: 17 [47346.410799] bits in page size: 11 [47346.410800] bits in OOB size: 6 [47346.410801] flash size with OOB: 135168 KiB [47346.410802] page address bytes: 4 [47346.410803] sector address bytes: 2 [47346.410804] options: 0x8 [47346.410996] Scanning device for bad blocks [47346.411004] [nandsim] warning: write_byte: command (0x0) wasn't expected, expected state is STATE_READY, ignore previous states [47346.416700] Creating 1 MTD partitions on "NAND 128MiB 3,3V 8-bit": [47346.416704] 0x000000000000-0x000008000000 : "NAND simulator partition 0" [47365.434784] UBI: default fastmap pool size: 50 [47365.434791] UBI: default fastmap WL pool size: 25 [47365.434793] UBI: attaching mtd0 to ubi0 [47365.436872] UBI: scanning is finished [47365.437321] UBI error: autoresize: cannot auto-resize volume 0 [47365.437399] UBI error: ubi_init: cannot attach mtd0 [47365.437954] UBI error: ubi_init: UBI error: cannot initialize UBI, error -28 --- Expected result: no error, UBI probed successfully. This test worked fine with some previous Ubuntu versions. Note that the issue disappears if 'vol_flags=autoresize' is removed from ubinize.cfg, but setting vol_size instead is not an optimal solution. This looks very much like the issue described here: http://lists.infradead.org/pipermail/linux-mtd/2012-August/043108.html ProblemType: Bug DistroRelease: Ubuntu 13.04 Package: linux-image-3.8.0-23-generic 3.8.0-23.34 ProcVersionSignature: Ubuntu 3.8.0-23.34-generic 3.8.11 Uname: Linux 3.8.0-23-generic i686 ApportVersion: 2.9.2-0ubuntu8.1 Architecture: i386 AudioDevicesInUse: USER PID ACCESS COMMAND /dev/snd/controlC0: bthebaudeau 2634 F.... pulseaudio CRDA: Error: command ['iw', 'reg', 'get'] failed with exit code 1: nl80211 not found. Date: Wed Jun 5 20:11:42 2013 HibernationDevice: RESUME=UUID=7893e31d-56e2-480a-b91f-a5143a766ec0 InstallationDate: Installed on 2013-06-03 (2 days ago) InstallationMedia: Ubuntu 13.04 "Raring Ringtail" - Release i386 (20130424) IwConfig: lo no wireless extensions. eth0 no wireless extensions. Lsusb: Bus 002 Device 002: ID 0e0f:0003 VMware, Inc. Virtual Mouse Bus 002 Device 003: ID 0e0f:0002 VMware, Inc. Virtual USB Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub MachineType: VMware, Inc. VMware Virtual Platform MarkForUpload: True ProcFB: 0 svgadrmfb ProcKernelCmdLine: BOOT_IMAGE=/boot/vmlinuz-3.8.0-23-generic root=UUID=d55977dd-09cd-4a6f-aa07-27a3b9272183 ro quiet splash RelatedPackageVersions: linux-restricted-modules-3.8.0-23-generic N/A linux-backports-modules-3.8.0-23-generic N/A linux-firmware 1.106 RfKill: SourcePackage: linux UpgradeStatus: No upgrade log present (probably fresh install) dmi.bios.date: 07/02/2012 dmi.bios.vendor: Phoenix Technologies LTD dmi.bios.version: 6.00 dmi.board.name: 440BX Desktop Reference Platform dmi.board.vendor: Intel Corporation dmi.board.version: None dmi.chassis.asset.tag: No Asset Tag dmi.chassis.type: 1 dmi.chassis.vendor: No Enclosure dmi.chassis.version: N/A dmi.modalias: dmi:bvnPhoenixTechnologiesLTD:bvr6.00:bd07/02/2012:svnVMware,Inc.:pnVMwareVirtualPlatform:pvrNone:rvnIntelCorporation:rn440BXDesktopReferencePlatform:rvrNone:cvnNoEnclosure:ct1:cvrN/A: dmi.product.name: VMware Virtual Platform dmi.product.version: None dmi.sys.vendor: VMware, Inc. ** Affects: linux (Ubuntu) Importance: Undecided Status: New ** Tags: apport-bug i386 raring -- You received this bug notification because you are a member of Ubuntu Bugs, which is subscribed to Ubuntu. https://bugs.launchpad.net/bugs/1187885 Title: UBI volume autoresize fails To manage notifications about this bug go to: https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1187885/+subscriptions -- ubuntu-bugs mailing list ubuntu-bugs@lists.ubuntu.com https://lists.ubuntu.com/mailman/listinfo/ubuntu-bugs
